Wooden Camera Faceplate Cage SKU: A00296 The only Faceplate that attaches directly to VENICE 2 using its existing sensor-block screws. DLC-coated stainless steel rosettes and an optional lens-centered Rod Clamp let you create a standalone rig that can be quickly removed from VENICE 2 for handheld, studio, and gimbal use. Mount everything to the Faceplate, and unlock the Top and Base Plates to slide off the camera, leaving an independent sensor cage with viewfinder and all accessories attached. Includes configurable swing-out tape hooks, a dedicated rod mounting point for lens control motors, EVF cable clips, and more. Weight: 254 gDimensions: 130 mm x 170 mm x 152 mm
Wooden Camera Faceplate Cage System SKU: A00215 The only Faceplate designed to integrate perfectly with existing sensor-block screw locations on the VENICE 2, allowing you to easily switch from camera mode to Rialto 2 Extension Mode while keeping your accessories attached. Features include DLC-coated stainless steel rosettes, a lens-centered Rod Clamp for use when the Base Plate is removed, configurable swing-out tape hooks, a dedicated rod-mounting point for lens control motors, EVF cable clips, and more. Weight: 312 gDimensions: 46.5 mm x 170 mm x 180 mm Included Items 1 x Faceplate Cage (Sony VENICE, VENICE 2, Rialto, Rialto 2)1 x Faceplate Cage 15mm Dual Rod Clamp (Sony VENICE, VENICE 2, Rialto, Rialto 2)
Wooden Camera Fujifilm GFX100S Camera CageSKU: A00067 Fujifilm GFX100S Cage is a feature-rich camera cage designed exclusively for the Fujifilm GFX100S camera. This is a wrap-around, one-piece cage. The custom design offers added support and stability while providing an array of industry-standard 1/4"-20 and 3/8"-16 mounting points along the top and side of the cage. All mounting points feature a Wooden Camera standard locating hole pattern which is compatible with ARRI standard locating pin accessories. The Arca-Swiss Dovetail can be removed and the included Arca-Swiss Wedge can be attached directly to the bottom of the cage parallel to the bottom of the camera - an orientation most commonly used in photography. The cage also features a detachable cable clamp, engraved markings to indicate the camera’s focal plane, intuitive battery door latch for use with dummy batteries, and a hot shoe clamp for securing the camera into the cage. Features Location TabsFocal Plane MarkingsFull Wrap-Around CageIntuitive Battery Door Latch1/4"-20 and 3/8"-16 Mounting Points with ARRI-Standard Location Pins Specifications Weight: 287g Dimensions: 122.3 x 172 x 66 mm
Wooden Camera Fujifilm X-H2S Camera CageSKU: A00053 Fujifilm X-H2S Cage is a feature-rich camera cage designed exclusively for the Fujifilm X-H2S camera. This is a full wrap around, one-piece cage. The custom design offers added support and stability while providing an array of industry-standard 1/4"-20 and 3/8"-16 mounting points along the top and side of the cage. All mounting points feature a Wooden Camera standard locating hole pattern which is compatible with ARRI standard locating pin accessories. The lower Arca-Swiss Wedge found on the Arca-Swiss Dovetail can be removed and attached directly to the bottom of the cage parallel to the bottom of the camera - an orientation most commonly used in photography. The cage also features a detachable cable clamp, engraved markings to indicate the camera’s focal plane, location tabs to make sure the camera is square to the cage, and a hot shoe clamp for securing the camera into the cage. Features Location TabsFocal Plane MarkingsFull Wrap-Around Cage1/4"-20 and 3/8"-16 Mounting Points with ARRI-Standard Location Pins Specifications Weight: 219gDimensions: 110 x 160.5 x 71.2 mm
Wooden Camera Rear Cage System (RED KOMODO-X) SKU: A00548 Utilizing the tie-in points at the top end of the camera's body, this Rear Cage System provides much-needed mounting points on the rear side of the camera. The cage allows users to tie into other components like the side rails, adding stability to the entire rig. A built-in Rail System utilizes Accessory Rails to further add a quick-release function to compatible accessories like Accessory Plates or the B-Box for (KOMODO, KOMODO-X, V-RAPTOR). This Wooden Camera Rear Cage System is also compatible with other accessories like the Rigging Top Plate.Included ItemsRear Cage - Right - RED KOMODO-XRear Cage - Left - RED KOMODO-XSpecificationsWeight: 123 gDimensions: 69 x 129 x 107 mm
Wooden Camera Sony FX6 Unified Accessory Kit (Base) SKU: 283600 Sony FX6 Unified Accessory Kit (Base) is a professional camera support package designed for the Sony FX6 camera and utilizes the Wooden Camera Unified Baseplate System. The FX6 accessory package includes: Top Plate (Sony FX6), a top mounting camera cheeseplate for accessory attachment, Unified Baseplate (Sony FX6), a quick release, camera baseplate for holding the two 15mm Rod (12") at the correct lens height. Included Items 1 x Top Plate (Sony FX6) 1 x Unified Baseplate (Sony FX6) 2 x 15mm Rod (12")
Wooden Camera Unified BMPCC4K Camera Cage SKU: 264000 The Unified BMPCC4K Camera Cage is designed for the Blackmagic Pocket Cinema 4K camera and features a minimalist design that provides mounting points on the top and side while leaving all of the camera's vital controls on the right grip and left side easily viewable and accessible.The Wooden Camera Unified BMPCC4K Camera Cage includes a reversible top handle in your choose of wood or rubber, which can be repositioned over the lens area when an XLR adapter is in use. Built into the handle is a cold shoe mount and a 15mm tube clamp for mounting any of our UVF Mount kits used with 3rd party electronic viewfinders. The handle can also fold down when packing your bag and can even be reconfigured onto the left, vertical 15mm rod for a secondary grip!The bottom portion of the cage includes a Manfrotto quick release dovetail which can attach to a variety of Manfrotto tripod heads. Quick release functionality works the same as existing Manfrotto plates. Simply turn the thumbscrew and depress the release pin to slide the plate backward out of the base.A built lens adapter support system is integrated into the base which is great for attaching to adapters with a 1/4"-20 on the bottom like Wooden Camera MFT to PL Mount Pro (1/4-20 Support Foot), and also many Metabones products.If lightweight 15mm support is desired, the cage may be combined with Unified DSLR 15mm Baseplate to provide pass through rod support (sold separately). Features 1/4"-20 holes - in standard spacing (9mm center to center)3/8"-16 holes - includes ARRI style locating pins and Manfrotto locating slotsFolding and reversible top handleManfrotto dovetail receiver plateRod Length: 117mm Includes 2 x 1/4"-20 screws3 x Stainless Steel 1/4"-20 Threaded Support Post Specifications Weight: 442g Dimensions: 215.9 mm x 114.3 mm x 152.4 mm
Wooden Camera Unified DSLR Cage (Medium) SKU: 243700 Wooden Camera Unified DSLR Cage (Medium) is a quick release, height adjustable cage that fits medium size DSLR cameras like Canon 5Dmk3, 5Dmk2, 7D, 6D, and Nikon D300, D600, D800. The open shoe mount area allows for hot shoe accessories to be installed without obstruction. The minimalist design gives you mounting points on the top and side while leaving all of the camera's vital controls on the right grip and left side easily viewable and accessible.The cage includes a reversible top handle which can be repositioned over the lens area when an XLR adapter is in use. Built into the handle is a cold shoe mount and a 15mm tube clamp for mounting any of our UVF Mount kits used with 3rd party electronic viewfinders. The handle can also fold down when packing your bag and can even be reconfigured onto the left, vertical 15mm rod for a secondary grip!Cameras with fold-out LCD screens can be positioned easily and an included HDMI cable clamp can be mounted to the vertical rod to secure video cables and prevent port damage. The bottom portion of the cage includes a Manfrotto quick release dovetail which can attach to a variety of Manfrotto tripod heads. Quick release functionality works the same as existing Manfrotto plates. Simply turn the thumbscrew and depress the release pin to slide the plate backward out of the base.A built lens adapter support system is integrated into the base which is great for attaching to adapters with a 1/4"-20 on the bottom like our E-Mount to PL Mount Pro (1/4-20 Support Foot), MFT to PL Mount Pro (1/4-20 Support Foot), and also many Metabones products.If lightweight 15mm support is desired, the cage may be combined with our Unified DSLR 15mm Baseplate to provide pass through rod support (sold separately). Features 1/4"-20 holes - in standard spacing (9mm center to center) 3/8"-16 holes - includes ARRI style locating pins and Manfrotto locating slotsFolding and reversible top handleManfrotto dovetail receiver plate Includes 2 x 1/4"-20 low profile screw3 x Stainless Steel 1/4"-20 Threaded Support Post Specifications Weight: 474gDimensions: 215.9 mm x 114.3 mm x 107.8 mm
Zacuto Canon C400 CageSKU: Z-C4CGThe Canon C400 cage includes a top plate and two side rails that mount to the VCT Pro. The side rails are optional and not required to use with the top plate.The Top Plate has a built in Z-Rail to mount the Tactical Handle. The cage design maintains access to the hotshoe on the top rear of the camera for audio devices. It also has tapped holes to relocate Canon's mic shock mount to the side of the cage. The cage has several bi-directional Z-Rail, integrated cold shoe slots in the rear, numerous anti rotation 1/4 20 and 3/8 16 tapped holes, and removable top 15mm rod clamps.The side rails are Z-Rail with Arri style rosettes, anti rotation 1/4 20 and 3/8 16 tapped holes.
Zacuto Canon C400 Top PlateSKU: Z-C4TPThe Zacuto Canon C400 Top Plate is designed for the Canon C400 Camera. The C400 Top Plate has a built in Z-Rail (NATO Rail) to mount the Tactical Handle. The design maintains access to the hotshoe on the top rear of the camera for audio devices. It also has tapped holes to relocate Canon's mic shock mount to the side of the cage. The cage has several bi-directional Z-Rail, integrated cold shoe slots in the rear, numerous anti rotation 1/4 20 and 3/8 16 tapped holes, and removable top 15mm rod clamps.
Zacuto Canon C70 Cage SKU: Z-C70C The Zacuto C70 Cage is our “no-cage” cage - lightweight and compact, and ready to accommodate any shooting style! It includes a Zacuto camera hand strap for a secure and comfortable grip on the camera. The cage also comes with an HDMI strain relief clamp and right angle HDMI adapter. It is compatible with Zacuto's own Arca Swiss- The 'ACT Recoil' to quickly transform from handheld run'n'gun shooting to shoulder-mounted to gimbal and more! The cage screws into the top and bottom of the camera with provided ¼"-20 screws for a rock solid connection. The top of the cage includes numerous ¼"-20 holes for mounting accessories. It also has built-in Z-Rails for mounting an optional handle or other accessories and features Canon's anti-twist grooves for mounting the camera's proprietary handle. The built-in Arca Swiss compatible bottom plate has three ¼"-20 threads and one 3/8"-16 thread for mounting a tripod plate or a Zacuto quick release plate. This allows you to move quickly from handheld, to shoulder mount, to tripod shooting. The cage also features an M6 ARRI rosette on the side for a handgrip, a coldshoe for mounting audio devices or a monitor, multiple ARRI anti-twist 3/8"-16 holes, and the option to relocate the camera's film plane screw to either side of the camera. No matter your style, this cage has you covered.
Zacuto Canon C80 CageSKU: Z-C80CCanon C80 cage including Zacuto camera hand strap for a secure and comfortable grip, HDMI strain relief clamp and right angle HDMI adapter - Compatible with the ACT Baseplate. The Canon C80 cage screws into the top and bottom of the camera with provided 1/4"-20 screws for a rock solid connection. The top of the cage includes numerous 1/4"-20 and 3/8"-16 holes for mounting accessories. It also has built-in Z-Rails for mounting an optional handle or other accessories and features Canon's anti-twist grooves for mounting the camera's proprietary handle.The built-in Arca Swiss compatible bottom plate has three 1/4"-20 threads and one 3/8"-16 thread for mounting a tripod plate or a Zacuto quick release plate. This allows you to move quickly from handheld, to shoulder mount, to tripod shooting.The cage also features an ARRI M6 rosette on the side for a handgrip, a coldshoe for mounting audio devices like a Zacuto MicroBoom or a monitor, multiple ARRI anti-twist 3/8"-16 holes, mounting holes to relocate the microphone, and the option to relocate the camera's film plane screw.
Zacuto GH5 Basic Cage SKU: Z-G5CA The Zacuto GH5 Cage is lightweight and compact, it packs in a ton of features! The GH5 Cage screws into the bottom of the camera with a provided 1/4 20 screw. It also attaches to the sides of the Panasonic GH5 camera, using the Panasonic eyelets neck strap connection with provided screws. It includes a Zacuto camera hand strap for a secure and comfortable grip on the camera. The cage ends at the eyelet neck strap connection, allowing you to use the camera's built in handgrip, keeping the cage small and light and have easy access to all camera controls. The top of the cage includes numerous ¼ 20 for mounting accessories. It also has a built in Z-Rail for mounting an optional top handle or other accessories. The bottom of the cage has 3 ¼ 20” thread for a tripod plate and a built in dovetail to slide into a VCT Pro shoulder mount baseplate or VCT Pro dock so you can quickly move your camera from handheld, to shoulder mount, to tripod shooting. The dovetail connection point is also where you will connect the optional 15mm lightweight rod support for attaching matte boxes, follow focuses, motors, etc. It will also slide onto our VCT Pro and VCT Pro Dock. The cage is designed for full access to the camera’s battery door, hotshoe and full button control. There is also a built in Metabones adapter support. Included with the cage is a left wooden handgrip with a built in cold shoe. Putting the coldshoe on the left gets it out of the way of the XLR cables for the optional Panasonic audio module mounted to the camera’s hotshoe. For those using the HDMI output, the cage includes an HDMI cable clamp to hold the full size HDMI cable steady to reduce strain. The cable clamp screws directly into the camera - so you can use it without the cage! Features Ultra Slim & LightweightIncludes a Zacuto camera hand strap for stability and comfort while using the camera’s gripAccess to camera’s battery, hotshoe and full button controlAttaches to camera’s neck strap eyelets for secure connectionTop Z-Rail for top handle or accessoriesCan slide into the VCT Pro shoulder mount baseplate or DockHDMI cable clamp for strain reliefRemovable Wooden side handle with built in coldshoeOptional non-rod based Micro 4/3rds to EF Metabones supportOptional Top handle with built in cold shoe.HDMI pincher that screws directly into cameraOptional 15mm rod support base