Core SWX HLX-BABV-S35 SKU: HLX-BABV-S35 The HLX-BABV-S35 mounts directly to ARRI Alexa 35 to provide a direct connection to the camera when removing the B-mount connection, to accept Helix V-mount battery packs. The mount plate provides high voltage to the camera and will also work in conjunction with ARRI PDM-1 and AEM-1 modules. Direct connect to use v-mount batteries on ARRI Alexa 35Seamlessly integrates with the ARRI Alexa 35Supports all Helix V-mount packs to provide high voltage to the cameraMount input: DC 20-34vOutput for Camera: DC 20-34v

Core SWX HLX-TB-SFF The HLX-TB-SFF is a B-mount to B-mount sharkfin plate that accepts HELIX B-mount battery packs. When two HELIX battery packs are on-board the adapter will output 20-34vdc with one pack or two. To insure there is enough power in one of the packs to facilitate a hotswap either stagger the packs when in discharge(start operating with one pack on, and then place another pack on after 10min. of usage) or exchange one of the depleted packs off the hotswap mount when 10% is remaining. This way the remaining pack will have ample power to carry the load of the rig. Features B-mount hotswap/sharkfin plateWorks with ARRI’s B-mount standardAllows you to mount two packs on a B-mount deviceMount input: DC 20-34vOutput for Camera: DC 20-34v, Unregulated requires HLX mount plate for 20-34v transmission

Core SWX HLX-TS-SFF SKU: HLX-TS-SFF The Core SWX HLX-TS-SFF is a v-mount to v-mount sharkfin plate that accepts HELIX battery packs and standard 14v packs. When two HELIX battery packs are on-board and connected to a HLX mount plate, the adapter can output both 11-17vdc and 22-34vdc. A separate pin set for high voltage allows for safe power transmission. Features Hotswap/Sharkfin V-Mount PlateAccepts both Helix packs to connect to HLX-BAB-V mount plate to output 33.6vAlso accepts 14v V-mount packs for parallel standard voltage operation Technical data Mount input: DC 11-34v Output for Camera/P-Taps: DC 11-34v, Unregulated

Core SWX HLX-VEN-V SKU: HLX-VEN-V The Core SWX HLX-VEN-V mounts to the Sony Venice with v-mount back with and without the RS7 module, and has a v-mount front. RS loops through port for start/stop. It passes standard 11-17vdc to camera. With HELIX packs, 100% efficient power is transmitted to 3pin Fischers. With 14v packs, the mount plate boosts voltage to 24v to 3pin Fischers connectors. Features On-Board Sony Venice V-Mount PlateV-mount backingIncludes start/stop pass through cableOffers 2x 3p Fischer 24v with boost converter for all 14v packsWith Helix mounted, 33.6v pass through to 3p Fischer Technical data Mount input: DC 11-17v Output for Camera/P-taps: DC 11-17v 3pin Fischer: DC 24-34v

Core SWX PB-SOLO-PCCGR PocketBase SOLO Panasonic CGR Battery Plate for Blackmagic Cinema & Pocket Cameras The PocketBase SOLO Panasonic CGR Battery Plate for BMCC / BMPCC allows you to power your BMCC (2.5K or 4K) or BMPCC with a Panasonic CGR DV battery. It features a locking release mount for the battery and a built-in boost converter that enables providing the 12V necessary for both powering and charging the camera. Two 24" interchangeable connection cables are included, one for connecting to the Cinema Camera and one for connecting to the Pocket Camera. A 1/4"-20 thread is available on the back for mounting the plate. DC Input 7 - 8.4 VDC Output 12 V (via built-in boost converter)Cable Length 61 cm PocketBase SOLO Key Features Allows powering the Blackmagic Cinema Camera or Pocket Camera with a Panasonic CGR batteryBuilt-in boost converter enables outputting 12V for both powering and charging the cameraIncludes 24" connection cables for both cameras

Core SWX PB-SOLO-SL PocketBase SOLO Sony L Series Battery Plate for Blackmagic Cinema & Pocket Cameras The PocketBase SOLO Sony L Series Battery Plate for BMCC / BMPCC allows you to power your BMCC (2.5K or 4K) or BMPCC with a Sony L Series DV battery. It features a locking release mount for the battery and a built-in boost converter that enables providing the 12V necessary for both powering and charging the camera. Two 24" interchangeable connection cables are included, one for connecting to the Cinema Camera and one for connecting to the Pocket Camera. A 1/4"-20 thread is available on the back for mounting the plate. DC Input 7 - 8.4 VDC Output 12 V (via built-in boost converter)Cable Length 61 cm PB-SOLO-SL Key Features Allows powering the Blackmagic Cinema Camera or Pocket Camera with a Sony L Series batteryBuilt-in boost converter enables outputting 12V for both powering and charging the cameraIncludes 24" connection cables for both cameras

Core SWX PowerBase Quick Release Plate The PB70QR is a replacement quick release plate for the Powerbase.

Core SWX PMC Plate Series for Sony Burano / Venice Introducing our versatile Power Management Control plate tailored for Sony Burano and Venice cameras, offering seamless adaptation and expanded power options. Notably, the Power Management Control plate features additional power outputs, including 2 PTAPs, a USBCPD output, and an HRS 4-pin 12V output, ensuring comprehensive connectivity on set. The Hotswap capability allows for uninterrupted power transitions between the on-board battery and an 11-17V DC power input, minimizing downtime during crucial production moments. For enhanced flexibility, the plate incorporates an I/O breakout connection to connect our Burano I/O Module power extension(only for Sony Burano) This extension provides supplementary power outputs, further catering to the diverse needs of professional filmmakers.The on-board color display on the operator-side screen presents vital information, including key voltage and battery percentage details. When smart battery packs are attached, the display intelligently shows battery percentage data, while voltage information is consistently available. Key Features Adapter plate for Sony Burano and Venice camerasAdditional outputs: 2 PTAPs, USBCPD output, HRS 4-pin 12V outputHotswap capability between on-board battery and 11-17V DC power inputI/O breakout for connecting Core’s Burano I/O Module extension(only for Sony Burano)On-board color display shows voltage and battery percentage information (smart battery packs enable percentage display) Specifications Output to Camera/Dtap: DC 11-16.8vUSB-C PD Output: DC 5v/9v/15v/20v, 45wWeight: 0,59 kg

Core SWX PMC Plate Series for Sony Burano / Venice Introducing our versatile Power Management Control plate tailored for Sony Burano and Venice cameras, offering seamless adaptation and expanded power options. Notably, the Power Management Control plate features additional power outputs, including 2 PTAPs, a USBCPD output, and an HRS 4-pin 12V output, ensuring comprehensive connectivity on set. The Hotswap capability allows for uninterrupted power transitions between the on-board battery and an 11-17V DC power input, minimizing downtime during crucial production moments. For enhanced flexibility, the plate incorporates an I/O breakout connection to connect our Burano I/O Module power extension(only for Sony Burano) This extension provides supplementary power outputs, further catering to the diverse needs of professional filmmakers.The on-board color display on the operator-side screen presents vital information, including key voltage and battery percentage details. When smart battery packs are attached, the display intelligently shows battery percentage data, while voltage information is consistently available. Key Features Adapter plate for Sony Burano and Venice camerasAdditional outputs: 2 PTAPs, USBCPD output, HRS 4-pin 12V outputHotswap capability between on-board battery and 11-17V DC power inputI/O breakout for connecting Core’s Burano I/O Module extension(only for Sony Burano)On-board color display shows voltage and battery percentage information (smart battery packs enable percentage display) Specifications Output to Camera/Dtap: DC 11-16.8vUSB-C PD Output: DC 5v/9v/15v/20v, 45wWeight: 0,59 kg

Core SWX Quick Release Plate Quick Release Plate for PocketBase Provides a quick release connection between the BlackMagic Pocket Camera and PocketBase. The 1/4-20 quick release plate screws directly into the Pocket Camera and the QR Base attaches to the PocketBase with the 1/4-20 thumbscrew, which is provided when you puchase a PocketBase. This also allows enough vertical clearance for the battery door on the Pocket Camera to drop so you can exchange SD cards. Compatible with tripods utilizing the Manfrotto/Bogen 3157N QR plate.

Core SWX Riser Plate for Nanlite Ballast SKU: HLX-SGPS-FZ The V-to-V adapter plate raises the lower V-mount connection on a NANLITE Ballast so that you can mount an APEX LV Battery Pack on the sled without mechanical interference. Technical data Input: DC 11-17v Output for Light: DC 11-17v, unregulated Size: 8,3 cm x 14 cm x 3,8 cm Weight: 320 g

Core SWX RM-GPTS-DSMC2 The Core SWX RM-GPTS-DSMC2 is a 15mm rod mount bracket with dual v-mount battery plates allow for continuous battery operation and hot swapping packs on the fly. By having two v-mount battery packs mounted you can easily remove the depleted battery while the leaving the other battery connected so that there is no down time. The bracket is compatible with all v-mount battery packs to provide a secure mounting surface for your rig setup. The system is terminated with a 18″ 6-pin RED LEMO to power your RED DSMC2 as well as one ptap output for powering accessories. The cheese plate features many 1/4-20 thread mounting points for attaching devices, arms, etc. Rods NOT included Features 15mm rail mount cheese plate with a sharkfin v-mount battery plate and 18″ 6-pin RED LEMO for RED DSMC2Features a dual v-mount battery plate which allows for continuous battery operation and hot swapping packs on the flyCompatible with all v-mount battery packs to provide a secure mounting surface for your rig setupFeatures a 18″ 6-pin RED LEMO to power your RED DSMC2 as well as one ptap output for powering accessoriesThe cheese plate features many 1/4-20 thread mounting points for attaching devices, arms, etc

Core SWX RMV-BMPC4 SKU: RMV-BMPC4 The Core SWX RMV-BMPC4 is a 15mm rod mount bracket with v-mount battery plate. The bracket works with all v-mount battery packs to provide a secure mounting surface for your rig setup. The Cheese Plate can be configured to mount vertically or horizontally, based on balance preference. The system is terminated with a 10″ 2-pin coil cable to power your Blackmagic Design Pocket 4K or 6K as well as one p-tap output for powering accessories. The cheese plate is configured with many 1/4-20 thread mounts for attaches devices, arms, etc., along with a soft Velcro rear backing to quickly attach a wireless audio RX, a wireless video RX, etc. without the need for additional hardware. Features 15mm rail mount cheese plate with v-mount battery plate and 10" 2-pin coiled cable for BMD Pocket 4K/6KWorks with all v-mount battery packs to provide a secure mounting surface for your rig setupThe Cheese Plate can be configured to mount vertically or horizontallyFeatures a 10″ 2-pin coil cable to power your Blackmagic Design Pocket 4K or 6K as well as one p-tap output for powering accessoriesThe cheese plate is configured with many 1/4-20 thread mounts for attaches devices, arms, etcSoft Velcro rear backing to quickly attach a wireless audio RX or a wireless video RX Rods NOT included

Core SWX RMV-KOM2 The Core SWX RMV-KOM2 is a 15mm rod mount bracket with v-mount battery plate. The bracket works with all v-mount battery packs to provide a secure mounting surface for your rig setup. The Cheese Plate can be configured to mount vertically or horizontally, based on balance preference. The system is terminated with a 10″ 2-pin coil cable to power your RED Komodo as well as one p-tap output for powering accessories. The cheese plate is configured with many 1/4-20 thread mounts for attaches devices, arms, etc., along with a soft Velcro rear backing to quickly attach a wireless audio RX, a wireless video RX, etc. without the need for additional hardware. Features 15mm rail mount cheese plate with a V-mount battery plate and 10″ 2-Pin coil cable for RED KomodoWorks with all v-mount battery packs to provide a secure mounting surface for your rig setupThe Cheese Plate can be configured to mount vertically or horizontallyFeatures a 10″ 2-pin coil cable to power your RED Komodo as well as one p-tap output for powering accessoriesThe cheese plate is configured with many 1/4-20 thread mounts for attaches devices, arms, etc.Soft Velcro rear backing to quickly attach a wireless audio RX or a wireless video RX

Core SWX Snap IT for V/G MountConversion Plate to use Snap battery on V or G-mount DevicesThe SNAP ‘IT’ Interface Terminal Adapter bridges the gap between Core SNAP battery ecosystem and V-Mount or G-mount devices, providing a seamless charge and discharge interface.Designed for efficiency and flexibility, the V-SNAPIT allows users to power V-Mount cameras, monitors, lights, and other professional equipment using Core’s innovative SNAP battery system.The G-SNAPIT allows users to power G-Mount cameras, monitors, lights, and other professional equipment using Core’s innovative SNAP battery system.With a compact and durable design, the SNAPIT integrates effortlessly into production setups, offering a secure V-Mount connection while enabling hot-swappable operation for continuous power. A rear toggle switch allows users to choose between charge and discharge mode, offering full control over power flow for ultimate versatility Whether you’re using SNAP packs in the field or the studio, this adapter provides a streamlined solution for those looking to maximize compatibility without adding unnecessary bulk.FeaturesV/G-Mount to SNAP Compatibility - Enables Core SNAP battery packs to charge and power V/G-Mount devicesCompact & Durable Design – Minimizes rig clutter while ensuring a secure and stable connectionHot-Swappable Power – Swap SNAP battery packs seamlessly for uninterrupted operationVersatile Power Delivery – Supports a wide range of V/G-Mount cameras, monitors, and production gearEfficient Workflow Integration – Simplifies power management by eliminating the need for multiple battery ecosystems.

Core SWX Snap IT for V/G MountConversion Plate to use Snap battery on V or G-mount DevicesThe SNAP ‘IT’ Interface Terminal Adapter bridges the gap between Core SNAP battery ecosystem and V-Mount or G-mount devices, providing a seamless charge and discharge interface.Designed for efficiency and flexibility, the V-SNAPIT allows users to power V-Mount cameras, monitors, lights, and other professional equipment using Core’s innovative SNAP battery system.The G-SNAPIT allows users to power G-Mount cameras, monitors, lights, and other professional equipment using Core’s innovative SNAP battery system.With a compact and durable design, the SNAPIT integrates effortlessly into production setups, offering a secure V-Mount connection while enabling hot-swappable operation for continuous power. A rear toggle switch allows users to choose between charge and discharge mode, offering full control over power flow for ultimate versatility Whether you’re using SNAP packs in the field or the studio, this adapter provides a streamlined solution for those looking to maximize compatibility without adding unnecessary bulk.FeaturesV/G-Mount to SNAP Compatibility - Enables Core SNAP battery packs to charge and power V/G-Mount devicesCompact & Durable Design – Minimizes rig clutter while ensuring a secure and stable connectionHot-Swappable Power – Swap SNAP battery packs seamlessly for uninterrupted operationVersatile Power Delivery – Supports a wide range of V/G-Mount cameras, monitors, and production gearEfficient Workflow Integration – Simplifies power management by eliminating the need for multiple battery ecosystems.

Core SWX Sony FX6 Snap PlateSKU: SNAP-FX6The Powerbase Edge SNAP Articulating Mount Plate for the Sony FX6 is designed to enhance power management for the Sony FX6, providing a versatile, adjustable mounting solution for SNAP battery packs. This articulating plate allows for vertical, horizontal, or angled positioning behind the camera while still permitting the use of Sony BPU-style batteries for backup power.With dual PDProTM outputs, users can efficiently power the camera (via PDPFX8 or PDPFX24 PD Pro cables) and other essential accessories, eliminating the need for multiple power sources. These PD Pro ports are also 100% compatible with standard USB-C PD devices, making it easy to charge laptops, mobile devices, and other production tools. In addition, the SNAP battery packs feature two P-Tap (D-Tap) outputs, allowing you to power monitors, wireless transmitters, and other production accessories from a single, streamlined setup. The patented SNAP system ensures quick battery swaps, enabling continuous, hot-swappable operation to keep productions running without interruptions.FeaturesArticulating Mount – Adjustable positioning (vertical, horizontal, or angled) for optimal camera balance and usabilityDual PD Pro Outputs – Provides simultaneous power to the FX6 and accessories via PDPFX8 or PDPFX24 cablesBPU Battery Compatibility – Retains access to Sony BPU-style batteries, ensuring seamless backup powerHot-Swappable Power – SNAP additional battery packs on the fly for uninterrupted operationStreamlined Setup – Compact, lightweight design for enhanced mobility without compromising power capacity.

Core SWX PBE Snap QRC PlateThe powder-coated aluminum Edge Snap QRC plate is an accessory that enhances the mounting versatility of Edge Snap packs. While the Powerbase Edge Snap packs themselves come with a single 1/4-20 connection, the Edge Snap QRC plate takes mounting options to the next level. By utilizing the Core SWX Edge Snap QRC plate, users gain access to a multitude of mounting possibilities. It enables packs to be securely mounted through various 1/4-20 and 3/8 anti-rotational connections, providing enhanced stability and reliability.Key FeaturesPowder-coated aluminum Edge Snap QRC plate enhances mounting versatility for Snap packsAllows packs to be securely mounted through various 1/4-20 and 3/8 anti-rotational connectionsFeatures 1/4-20 threads and a standard V-lock shoe mechanical mount for easy attachment to compact handheld DSLR or cinema camerasProvides filmmakers with a wide array of mounting options to suit specific shooting needsEnsures compatibility and reliability, allowing filmmakers to focus on capturing the perfect shot without power source concernsSpecificationsMount Type: SNAP StackingMaterial: Powder Coated AluminumSize: 11,38 x 7,19 x 0,89 cmWeight: 0,14 kg

Core SWX V-Mount Conversion Plate A-GP-S SKU: AGPS The Core SWX A-GP-S is a temporary solution to allow the use of V-Type batteries on 3-stud configured cameras. It can also be used as a charge adapter, enabling you to temporarily charge V-Type batteries on PRO-X series 3-Stud charging equipment. Core SWX A-GP-S Technical data Input DC 11-17vOutput for Camera DC 11-17v, UnregulatedOutput for P-Tap DC 11-17v, UnregulatedSize 8.26 cm x 13.97 cm x 3.81 cmWeight 0.32 kg

HedBox HBP-NPF HedBox HBP-NPF allows you to power any V-Mount/V-Lock Professional Broadcast Camcorder, with standard two High Capacity L-series or NP-F Batteries, as long as the voltage is equivalent to 7.2V ~ 7.4V. The combined voltage of the two L-series or NP-F Batteries will be 14.4V ~ 14.8V, which is the standard output power of a V-Mount Battery Pack, that use all world brand Professional Broadcast Camcorders… HBP-NPF allows you to power any V-Mount/V-Lock Professional Broadcast Camcorder, with standard two High Capacity L-series or NP-F Batteries, as long as the voltage is equivalent to 7.2V ~ 7.4V. The combined voltage of the two L-series or NP-F Batteries will be 14.4V ~ 14.8V, which is the standard output power of a V-Mount Battery Pack, that use all world brand Professional Broadcast Camcorders… V-Mount Connection Holder HBP-NPF is equip with standard V-mount connection, and we adopt the high quality lightweight aluminium V-wedge that ensures the reliable and safe mounting. Built-in D-tap Output 14.8V 72W, 6A DC Socket A D-Tap DC output socket is equipped on the side of the HBP-NPF plate. With this external Power supply facility, you can connect on-camera LED light, Video Monitor or Wireless Transmitter on the D-tap socket, and get power simultaneously together with Battery Plate attached to the Camera, or totally separately like independent Power Station. The Max power from D-tap is 72W, 6A. 4-LED Power Monitor Indicator HBP-NPF V-Lock Battery Converter Plate have build in 4-LED Power Monitor indicator that, upon the press of test button, shows whether 100%, 75%, 50%, or 25% of power is left remaining in the mounted DV Battery Packs. Technical data Model: HBP-NPF V-lock DV NP-F Battery Converter Power Adapter PlateMount Type: V-Lock ( High Quality Aluminium Alloy wedge plate)DV Battery Slots: 2 x Sony NP-F Style BatteryOutput Voltage: DC 13 – 16.8V , 8A / 72W (max)Support Bat Voltage: DC 7.2 – 7.6VSupported Capacity: From 1400mAh to 20000mAhD-Tap DC Output: 14.8V / 8A / 72W (max)Power Meter: Blue Color 4-LED Power Monitor ( Display 100%, 75%, 50%, or 25% bat. capacity )Operating Temperature: –20°C to +45°CDimensions (WxDxH): 96 x 22 x 151 mmWeight: 140 gOperational Method: Mount 2 x DV Sony NPF Style battery to generate 14.8V / 8A V-lock mount DC Power

IDX P-V2 The IDX P-V2 is a rugged V-Plate to convert cameras without a rear V-Mount battery connection, so that any of the V-Mount ENDURA batteries can be easily attached. The P-V2 is designed with multiple mounting holes to fit virtually all professional video cameras, with the added advantage of a built-in 2-pin D-Tap 50W DC output. The P-V2 can also be used as the V-Mount adaptor for many types of monitors, displays, test instruments and more.

Shape 2 V-MOUNT AND 2 CABLES FOR ATOMOS SUMO BATTERY PLATE SKU: 2VMAB Shape 2 V-MOUNT AND 2 CABLES FOR ATOMOS SUMO BATTERY PLATE includes 2 x Shape SH1VMAB

Shape Sony FX6 V-Mount pivoting battery plate SKU: VBFX6 The SHAPE V-Mount pivoting battery plate for Sony FX6 attaches to the rear of the top plate (FX6TP) and supports a V-mount battery while leaving access to the camera’s standard battery compartment. Our V-mount battery plate provides the right battery voltage and amperage to use with your Sony FX6 camera. By pivoting the battery plate, you have access to the BPU battery of the camera. A swivel system let you pivot the battery plate up and down. It features 1 D-Tap port for powering accessories. It also uses a digital fuse that monitors the D-Tap ports and disables them if they exceed the set current for accessories while leaving the camera running. It connects to the camera using the SHAPE 19.5V output D-Tap power cable for Sony FX6. The cable regulates the voltage from a D-Tap source to the proper 19.5 V required to power an FX6 camera. This allows you to power your camera using any V-mount battery with a D-Tap plug. The cable has a total end-to-end length of 15″ (38 cm). A universal cheeseplate with 1/4″-20 and 3/8”-16 threaded holes. The cheeseplate can tilt up and down with a patented 15 mm Push-button system to provide easy access to the rear connector and have access to the BPU battery. Features V-Mount pivoting battery plate compatible with Sony FX6 top plate (FX6TP) only Push-button system lets you tilt the battery plate up and down Easy access to the rear connector (Please refer to the camera’s operating manual for proper usage) Attaches to the Rear of the Sony FX6 top plate (FX6TP) Supports V-Mount Battery (1) D-Tap Ports & Protective Digital Fuse (1) D-Tap Power Cable for Sony FX6 provide 19.5V power output Multiple holes on top and side of the cheeseplate Made of CNC Aluminum

TILTA Battery Plate for RED V-RAPTOR / KOMODO-X This Battery Plate adapts the RED V-RAPTOR’s Micro V-Mount Battery Plate to either a Gold Mount or Full Sized V-Mount Battery Plate as well as provides a convenient slot to power and mount the Advanced I/O Module (not included). The V-Mount option features an adjustable plate that allows you to fine tune the height of your battery in relation to the camera body. This allows you to better accommodate different sized batteries and helps keep your build balanced and clean. When using our Top Plate, you can install the Battery Plate Security Attachment for an additional point of contact between your Battery Plate and Camera Cage. This Battery Plate includes the following power outputs: 2 x 14.8V 2-Pin LEMO Port1 x 14.8V P-Tap Port1 x USB-C Port