Freefly Ember S5K (4TB)

Freefly Ember Cheese PlateSKU: 910-00715 Utilizing the mount brackets included with Ember, it attaches seamlessly while still leaving enough space for heat dissipation on the camera. With a variety of mounting options, you can attach virtually any existing battery plate (including the FXLION Nano V-Mount), memory setup, or whatever you please. There’s also a full row of side facing 1/4”-20s to allow rigging in the horizontal plane. Features Includes 1/4”-20, 3/8”, and M3 mounting pointsAttaches to the brackets included with the Ember camera using M3 fastenersWorks with most standard battery plate mount hole patterns

Freefly Adjustable Monitor Mount Quick Release SKU: 910-00680 The monitor attaches to the mount using a quick release 13mm plug, making it compatible with any 13mm mount accessories in the Freefly ecosystem. Two types of mounting hardware are included. The recommended method is 2x M3 fasteners, which keeps it from rotating when installed to the top, bottom or sides of the camera (as needed). But we also included a 1/4" 20 mount for quick install or universal mounting to other items with 1/4" 20 threaded holes.

MID49 Baseline 15mm LW (RED KOMODO, KOMODO-X / Blackmagic Pocket 4K / FREEFLY Ember S5K Baseplate) SKU: M49-BSL-LW23-AC14 Baseline 15mm LW (RED KOMODO, KOMODO-X / Blackmagic Pocket 4K / FREEFLY Ember S5K Baseplate) is a baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens. ARRI dovetail slot on the bottom attaches to the included Baseline ARRI Dovetail or other ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew. Baseline ARRI Dovetail is the included lower ARRI mounting plate which can attach to tripod plates using 1/4-20 or 3/8-16 screws or ARRI standard bridgeplates with centered or offset screw spacing. ARCA dovetail slot on top holds the included ARCA Dovetail and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten. Center screw slot on ARCA Dovetail accepts 1/4-20 and 3/8-16 mounting screws, and a vertical rod hole clamps included 1/4-20 lens support posts for adaptors like Metabones, etc. Rod Bracket (15mm LW) (sold separately) can be attached to the back of the baseplate for rear 15mm LW rod support. Individual components of this kit are also available: Baseline Core 15mm LW (23mm Platform Height)Baseline ARCA Dovetail (14.5mm Height)Baseline ARRI Dovetail Technical data Product Weight: 350gProduct Dimensions (WxLxH): 123 x 140 x 58mm