Wooden Camera Canon RF to PL Mount Pro (RED KOMODO) SKU: 280600 Canon RF to PL Mount Pro adapts PL lenses to Canon RF Mounts including RED KOMODO. Flange focus is set to match camera prior to shipping but shims are included should further adjustment be desired.  Tabs on PL collar allow for easy lock and unlock and 1/4-20 on mount base allows for lens support to be added like that on the LW 15mm Baseplate (RED KOMODO). Front port cap is included.Includes 3 x Vertical lens support posts (Small, Medium, Large) Weight: 240 gDimensions: 95.25 mm x 95.25 mm x 57.15 mm

Wooden Camera E-Mount to PL Mount Pro SKU: 233400 E-Mount to PL Mount Pro (Sony Alpha, FS7mkII, FX9) is a shimmable version of Wooden Camera's popular Sony E-Mount lens mount adapter that enables mounting of PL mount lenses onto the Sony E-Mount cameras including the Sony FX9 and FS7mkII. The FX9 and FS7mkII have positive locking E-Mounts which eliminate the need for the support foot, but if additional support is desired, use the 1/4-20 foot and combine with our Unified Baseplate (Sony FS7mkII, FX9) using the vertical support hole and the Unified Lens Adapter Support Kit. PL Cap included to prevent dust from entering sensor area when lens is not attached.If you are using the E-Mount to PL Mount Pro without a camera cage, you can use the included WC Lens Adapter Universal Support Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses. In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Includes 2 M4x20mm socket cap screw1 1/4-20 Support Foot1 Universal Support Foot Specifications Weight: 251g Dimensions: 85.1 mm x 81.8 mm x 48 mm Features - 1/4-20 foot for attaching tripod plate or support Shim setstackable to achieve necessary thickness) Silver .0127mm (0.0005")Amber .0254mm (0.001")Purple .0381mm (0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm (0.005") Compatibility This adapter will also work with any Sony E-Mount camera like the below:Sony FS7Sony FS7mkIISony FS5Sony FX9Sony A7s, A7sII, A7r, A7rII, A6300Sony FS700Sony FS100Many more!

Wooden Camera Fujifilm G Mount (GFX) to ARRI LPL Mount Adapter SKU: 274400 Fujifilm G Mount (GFX) to ARRI LPL Mount Adapter allows ARRI LPL Signature Prime Lenses to be used with Fujifilm G Mount (GFX) cameras. Mount includes an integrated foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The support foot can also be attached to the Unified DSLR Cage natively using the vertical support hole and the Unified Lens Adapter Support Kit. LPL Cap included to prevent dust from entering sensor area when lens is not attached. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. ARRI's LPL to PL Adapter is also compatible, allowing easy change from standard PL lenses to LPL lenses. LPL Mount is passive and does not communicate lens data to the camera.  Shim Setstackable to achieve necessary thickness Silver .0127mm (0.0005")Amber .0254mm (0.001")Purple .0381mm (0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm (0.005") Specifications Weight: 223g Dimensions: 81.8 x 81.8 x 38.1 mm

Wooden Camera Fujifilm G Mount (GFX) to PL Mount Adapter SKU: A20018 Fujifilm G Mount (GFX) to PL Mount Adapter is a shimmable version of our ARRI PL lens mount adapter that enables mounting of ARRI PL mount lenses onto the Fujifilm G mount cameras. The mount includes a built-in support foot with a 1/4-20 threaded hole that can be used to eliminate strain on the camera. If the Unified DSLR Cage (Small or Medium) is installed, one of the three included Vertical Lens Support Posts can attach to the 1/4-20 thread of the support foot supported by the support post clamp on the DSLR Cage's ARCA Plate. ARRI PL Cap included to prevent dust from entering the sensor area when lens is not attached. Fujifilm G Mount to PL Mount Adapter features a matte black paint on the inside to absorb more light. Additionally, you’ll find a new stainless steel X mount on the back. If you are using the GFX to PL Mount Adapter without a camera cage, you can use the included DSLR Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses. In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Weight: 209.6g Dimensions: 89.5 mm x 87.2 mm x 47.4 mm

Wooden Camera Fujifilm X Mount to PL Mount AdapterSKU: A00020 Fujifilm X Mount to PL Mount Adapter is a shimmable version of our ARRI PL lens mount adapter that enables mounting of ARRI PL mount lenses onto the Fujifilm X mount cameras. Mount includes a DSLR foot with 1/4"-20 threaded hole for attaching to a tripod eliminating strain on the camera. The foot can also attach directly to the front of the Unified DSLR Cage (Small) by two included screws. ARRI PL Cap included to prevent dust from entering the sensor area when lens is not attached. The Fuji X Mount to ARRI PL Mount Adaptor features a matte black paint on the inside to absorb more light. Additionally, you’ll find a new stainless steel X mount on the back. If you are using the Fujifilm X Mount to PL Mount Adapter without a camera cage, you can use the included DSLR Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses. In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Features Infinity FocusingPrecision MachinedIncluded Mount SupportAircraft-Grade Aluminum Construction Includes (3) Vertical Lens Support Posts (Small, Medium, Large) Specifications Weight: 274gDimensions: 89.5 x 89.2 x 50.3 mm

Wooden Camera Fujifilm X Mount to PL Mount Adapter (Pro)SKU: 268900Fujifilm X Mount to PL Adapter (Pro) is a shimmable version of PL lens mount adapter that enables mounting of PL mount lenses onto the Fujifilm X mount cameras. Mount includes a foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The foot can also attach directly to the front of the Unified DSLR Cage (Small) by two included screws. PL Cap included to prevent dust from entering sensor area when lens is not attached.If you are using the Fujifilm X Mount to PL Mount (Pro) without a camera cage, you can use the included WC Lens Adapter Universal Support Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses.The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity.Includes2 x M4x20mm socket cap screw1 x 1/4-20 Support Foot1 x Universal Support FootSpecificationsWeight: 251gDimensions: 85.1 x 81.8 x 48 mm

Wooden Camera L-Mount to PL Mount Pro SKU: 271800 L-Mount to PL Mount Pro (Panasonic and Leica) is a shimmable version of our PL lens mount adapter that enables mounting of PL mount lenses onto the Panasonic and Leica L-Mount cameras. Mount includes a foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The foot can also attach directly to the front of the Unified DSLR Cage (Medium) by two included screws. PL Cap included to prevent dust from entering sensor area when lens is not attached. If you are using the L-Mount to PL Mount Pro (Panasonic and Leica) without a camera cage, you can use the included WC Lens Adapter Universal Support Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses. In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The Wooden Camera L-Mount to PL Mount Pro adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Includes (2) M4x20mm socket cap screw(1) 1/4-20 Support Foot(1) Universal Support Foot Shim Setstackable to achieve necessary thickness Silver .0127mm (0.0005")Amber .0254mm (0.001")Purple .0381mm (0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm (0.005") Specifications Weight: 251g Dimensions: 85.1 x 81.8 x 48 mm

Wooden Camera LPL Mount for FUJIFILM GFX ETERNA 55SKU: A00936This adapter allows ARRI LPL mounted lenses to attach to the FUJIFILM GFX mount. The lens adapter connects directly to the camera and is held in place by the camera's locking mechanism along with four screws. This robust attachment method mirrors the security of Fuji's existing lens mount, ensuring that connected lenses remain securely fastened during operation, minimizing the risk of accidental detachment or movement.SpecificationsWeight: 270.8 gDimensions: 117.1 x 116.3 x 39.4 mmIncludesSet of Polyester ShimsLPL Cap

Wooden Camera MFT to PL Adapter (Pocket) SKU: 169600 Wooden Camera MFT Adapter (Pocket) is a micro four thirds lens mount adapter that enables mounting of all PL mount lenses onto the Blackmagic Design Pocket Cinema Camera (BMPCC) The Adapter includes a foot for attaching to a tripod directly eliminating strain on the camera. The foot can also attach directly to the Wooden Camera Pocket Cage by two included screws. PL Cap included to prevent dust from entering sensor area when lens is not attached. This MFT to PL Adapter will also work with any MFT camera like the BMCC MFT, GH3, AF100, Pocket Cinema Camera 4K etc. 1/4-20 foot for attaching tripod plate or supportIncludes 2 x M4 x 20 mm socket cap screw

Wooden Camera Nikon Z Mount to PL Mount Adapter (Pro) SKU: 269000 Nikon Z Mount to PL Adapter (Pro) is a shimmable version of our PL lens mount adapter that enables mounting of PL mount lenses onto the Nikon Z series of Mirrorless cameras. Mount includes a foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The foot can also attach directly to the front of the Unified DSLR Cage (Small) by two included screws. PL Cap is included to prevent dust from entering the sensor area when the lens is not attached. If you are using the Nikon Z Mount to PL Mount (Pro) without a camera cage, you can use the included WC Lens Adapter Universal Support Foot to attach directly to the bottom of your camera and lens mount. This allows all the weight to be transferred from the lens mount to the bottom of the camera to avoid any flexing or damage that could occur when using heavier lenses. In our factory, we set the flange focus using collimation tools. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color-coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. Weight: 251g Dimensions: 85.1 mm x 81.8 mm x 48 mm Includes 2 x  M4x20mm socket cap screw1 x 1/4-20 Support Foot1 x Universal Support Foot

Wooden Camera PL Mount (Canon C300mkIII, C500mkII) SKU: 282100 PL Mount (Canon C300mkIII, C500mkII) allows users to convert their Canon C300mkIII and C500mkII camera to a PL Mount through a simple modification process. The PL Mount is made of stainless steel and aircraft grade aluminum and includes the PL port cap. Shims are provided with the kit for adjusting back focus if it is out of calibration. Adjustment should not be needed but can be checked using a wide angle lens and a focus chart. The native Canon C300mkIII/C500mkII Lens Mount screws are used to attach the PL Mount to the camera. The modification process can be reversed by reversing steps in the process. Shim Set stackable to achieve necessary thickness Silver .0127mm (0.0005") Amber .0254mm (0.001")Purple .0381mm (0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm (0.005")

Wooden Camera PL Mount Cap SKU: 174600 Replacement PL Mount Cap for any ARRI standard PL mount including MFT to PL Adapter (Pocket) MFT to PL Adapter (GH3) and many more.

Wooden Camera PL Mount Modification Kit SKU: 274600 The PL Mount Modification Kit (Blackmagic Pocket Cinema Camera 6K / 6K Pro) allows users to convert their BMPCC6K camera to a PL Mount through a short modification process. All necessary tools are included in the kit. The PL Mount is made of stainless steel and aircraft grade aluminum and includes the PL port cap. Shims are provided with the kit for adjusting back focus and the appropriate shims are installed prior to shipping. Further adjustment should not be needed but can be checked using a wide angle lens and a focus chart. The BMPCC6K's own EF Mount screws are used to attach the PL Mount to the camera.The modification process can be reversed. If you choose to go back to EF mount in the future, you can do it by reversing steps in the process, however, switching back and forth will eventually strip the plastic in your camera as the sensor block is made of a composite plastic material (it is strong but still plastic). Includes 1x Shim Set1x Jeweler's ScrewdriverShim set (stackable to achieve necessary thickness)Silver .0127mm (0.0005") Amber .0254mm (0.001")Purple .0381mm (0.0015")Red .0508mm (0.002")Green .0762mm (0.003")Tan .1016mm (0.004")Blue .127mm (0.005") Important Note: While the vast majority of modern, s35mm lenses are compatible, lenses with a rear protrusion longer than 33.5mm, measured from the PL flange, are not compatible and other lenses may not fit due to the shape of the original Blackmagic 6K body design. A list of incompatible lenses will be available but will be a work in process. A diagram will also become available soon which will detail the protrusion requirements for fitting into a modified BMPCC6K.

Wooden Camera Sony E-Mount to LPL Mount Adapter (Pro) SKU: 269100 ARRI LPL Mount for Sony E-Mount Cameras allows ARRI LPL Signature Prime Lenses to be used with Sony E-Mount Full Frame Alpha series cameras. Mount includes a foot with 1/4-20 threaded hole for attaching to a tripod eliminating strain on the camera. The support foot can also be attached to the Unified DSLR Cage natively using the vertical support hole and the Unified Lens Adapter Support Kit. LPL Cap included to prevent dust from entering sensor area when lens is not attached. You only need to adjust the shims should you find that your camera is out of calibration. The adapter is shimmable by loosening six socket cap screws around the collar area, separating the two sections, and adding color coded shims of various thickness. Back focus should be checked using collimation tools or a wide lens focused to infinity. LPL Mount is passive and does not communicate lens data to the camera. Weight: 216 gDimensions: 81,8 mm x 81,8 mm x 46.5 mm

Z CAM LPL MOUNT FOR Z CAM E2 FLAGSHIP SERIESSKU: ZCE2LPLIntroducing the Z CAM LPL Mount for Z CAM E2 Flagship Series – the ultimate accessory for filmmakers and content creators seeking to elevate their cinematic experience. Designed specifically for the Z CAM E2 flagship series

Z CAM PL MOUNT FOR Z CAM E2 FLAGSHIP SERIESSKU: ZCE2EPLCrafted with precision, the ZCE2EPL mount ensures a secure fit and optimal alignment, providing you with the confidence to capture stunning visuals with your Z CAM E2.