Porta Brace AR-DR680B Porta Brace AR-DR680 Audio Recorder Case is designed to custom fit a Tascam DR680 8-Track portable field audio recorder. The case is made from durable, waterproofed 1000 denier DuPont Cordura nylon exterior with high-density closed-cell foam padding. It protects against the elements and the hard knocks of field recording. There are clear vinyl view window that protect the controls. A front panel zips open to about 30° to access controls and prevents the pocket contents from spilling out. A battery access panel makes emergency battery changes go smoothly. There are left and right cable areas that can be sealed against dust, rain, snow or can be rolled back and left open. It is carried by a removable, adjustable, suede leather-covered shoulder strap with pad.

Porta Brace AR-MIXPRE3The AR-MIXPRE3 Audio Recorder Case is a lightweight and durable field carrying solution that is custom-fit to carry and protect the Sound Devices Mix-Pre 3 field recorder setup. The case exterior is made from durable, abrasion-resistant 1000-denier Cordura nylon. The case body is lined with a layer of foam padding to help absorb shocks and protect form bumps and scratches.Side openings provide complete access to cable input / outputs and memory card slots. The openings seal tight with hook and loop fastener to provide maximum protection against water, dust and debris. The AR-MIXPRE3 also comes with a clear Vinyl cover that can be easily attached to allow an unobstructed view of the recorder's screen while protecting the Mix-Pre 3 from rain or splashing.There is a wireless transmitter pocket on each side of the case and molle strips along the front of the case to allow for more transmitters to be clipped (4 total).Abrasion-resistant 1000-denier Cordura nylon Rigid frame panels for maximum protection Foam padding to absorb shocks Zipper and touch fastener closure Clear Vinyl cover protects against rainEquipment CoveredSound Devices MixPre-3

Porta Brace AR-MIXPRE6 SKU: AR-MIXPRE6 The AR-MIXPRE6 Audio Recorder Case is a lightweight and durable field carrying solution that is custom-fit to carry and protect the Sound Devices Mix-Pre 6 field recorder setup. The case exterior is made from durable, abrasion-resistant 1000-denier Cordura® nylon. The case body is lined with a layer of foam padding to help absorb shocks and protect form bumps and scratches. Side openings provide complete access to cable input / outputs and memory card slots. The openings seal tight with hook and loop fastener to provide maximum protection against water, dust and debris. The AR-MIXPRE6 also comes with a clear Vinyl cover that can be easily attached to allow an unobstructed view of the recorder's screen while protecting the Mix-Pre 6 from rain or splashing. There is a wireless transmitter pocket on each side of the case and molle strips along the front of the case to allow for more transmitters to be clipped (4 total).Features Abrasion-resistant 1000-denier Cordura nylon Rigid frame panels for maximum protection Foam padding to absorb shocks Zipper and touch fastener closure Clear Vinyl cover protects against rain

Porta Brace AR-P82 Porta Brace AR-P82 Audio Case (Signature Blue) is designed to carry and protect a Tascam HS-P82 8-channel field audio recorder. The case is made from 1000 denier Cordura nylon with an interior that is padded with high-density foam. The modular design gives the flexibility to change the combination of equipment that each job demands and a detachable RM-Multi Extreme case is included. Roll-up, fold-away, clear vinyl windows, flaps and rain boots protect against rain, dust, snow and stay out of the way when necessary. The case also organizes batteries, head phones, cables, and compact flash cards. There is a back pocket that will carry external DC input power options such as NP type battery, AC adapter, V-mount adapter for Endura batteries or spare AA batteries. A small visor for the TFT color touch screen is stored in the back pocket. The case is carried by a black leather hand grip or a removable, adjustable suede leather-covered shoulder strap with pad.

Porta Brace AR-PMD661B Porta Brace AR-PMD661 is a foam padded case designed to carry and protect Marantz PMD-661. The flaps, clear vinyl windows and protective coverings provide access to cassettes, batteries, cables, dials and switches. There is extra room for spare cassettes, batteries, wireless microphones, and other small items. An suede leather shoulder strap is provided.

Porta Brace AR-Z8XC The AR-Z8XC Audio Recorder Case is a lightweight and durable field carrying solution that is custom-fit to carry and protect a Zoom F8 field recorder setup. The case exterior is made from durable, abrasion-resistant 1000-denier Cordura® nylon. The case body has two lightweight rigid frame panels for maximum protection, which are lined with a layer of foam padding to help absorb shocks. Side openings provide complete access to cable input / outputs and memory card slots. The openings seal tight with Velcro® to provide maximum protection against water, dust and debris. The AR-Z8XC comes with a clear Vinyl cover that can be easily attached to allow an unobstructed view of the recorder's screen while protecting the Zoom F8 from rain or splashing. The AR-Z8XC comes with an additional battery holder on the bottom of the case and a pouch for carrying additional wireless receivers that attaches to the front of the case. There is also an adjustable suede shoulder strap for extra comfort. The strap can be removed if you prefer to use the case with a harness (we recommend the AH-2H Portabrace Harness). Features Abrasion-resistant 1000-denier Cordura nylonRigid frame panels for maximum protectionFoam padding to absorb shocks Zipper and touch fastener closure Clear Vinyl cover protects against rain for Zoom F8 Package Includes 1 x HB-10M Suede Shoulder Strap 1 x ATV-BAT Audio Battery Pouch 1 x ATV-POUCH Wireless Front Pouch

Porta Brace AR-ZH4 Audio recorder Case The AR-ZH4 case is custom made for the Zoom H4 recorder. A thin, clear vinyl window protects controls while you use them. You have access to and protection for all cables and switches. Porta Brace AR-ZH4 can be worn on a belt or connected to an optional shoulder strap (HB-12 or HB-15) to wear around your neck. There's also quick and easy access to the battery. Equipment covered Zoom H4Zoom H4n

Porta Brace AR-ZH6 The Porta Brace AR-ZH6 is a custom-fit carrying case for the Zoom H6 recorder. The main part of the case is constructed using durable, balistic-grade Cordura nylon. Clear vinyl windows allow viewing of controls while protecting the Zoom recorder from rain and dust. Velcro-sealed openings provide access to controls on the front of the recorder and complete access to ports on both sides of the unit. It can be worn on a belt or connected to an optional shoulder strap (HB-12) to wear around your neck. Clips help attach Zoom recorder to cameraExtend equipment life, stay organizedHighly abrasive resistant DuPont nylon CorduraTransport on belt or shoulder strap (strap optional)User friendly designWeight: 0.23 kg

Porta Brace ATV-MIXPRE10TThe Portabrace ATV is the first of its kind. The innovative vest combines both an audio harness and audio bag in to one cohesive military-style tactical vest.Its lightweight and streamlined design provides the user with unparalleled stability. The vest grips the body, providing great support and weight distribution. This allows the user to move much more rapidly and freely whilst in the field.The Portabrace ATV-MIXPRE10T is compatible with the Sound Devices MixPre-10T. The use of these powerful mixers combined with dual wireless systems creates a lightweight and compact rig capable of recording multiple tracks on the run. This tactical vest is the perfect option for any ENG or fast-paced reality and documentary mixer.The long list of features includes: a modular iPad pouch, an innovative new boom clip, a removable pouch that can attach to either the front or back, a separate modular phone/pen holder, which is interchangeable with the iPad sleeve. In addition, there is an NP1 pocket situated under the mixer and a double vinyl rain cover that opens up and acts as a pouchForm-fitting design stabilizes equipment close to your body, even when on the moveDurable, 1000-denier Cordura Nylon constructionBoom pole clip provides convenience and rest when not recordingSwap out integrated tablet pouch or phone/accessory pouchModular design adds additional storage if neededEquipment CoveredSound Devices MixPre-10T

Portabrace ATV-MIXPRE6 The Portabrace ATV is the first of its kind. The innovative vest combines both an audio harness and audio bag in to one cohesive military-style tactical vest. Its lightweight and streamlined design provides the user with unparalleled stability. The vest grips the body, providing great support and weight distribution. This allows the user to move much more rapidly and freely whilst in the field. The Portabrace ATV-MIXPRE6 is compatible with the Sound Devices MixPre-6. The use of these powerful mixers combined with dual wireless systems creates a lightweight and compact rig capable of recording multiple tracks on the run. This tactical vest is the perfect option for any ENG or fast-paced reality and documentary mixer. Form-fitting design stabilizes equipment close to your body, even when on the move Durable, 1000-denier Cordura Nylon construction Boom pole clip provides convenience and rest when not recording Swap out integrated tablet pouch or phone/accessory pouch Modular design adds additional storage if needed Equipment CoveredSound Devices MixPre-6Package includes1 x Tactical Vest and custom case 1 x ATV-BMPH Boom pole clip 1 x ATV-PHP Cell phone pouch 1 x ATV-POUCH Extra front pouch

Portabrace ATV-Z8 The Portabrace ATV is the first of its kind. The innovative vest combines both an audio harness and audio bag in to one cohesive military-style tactical vest.Its lightweight and streamlined design provides the user with unparalleled stability. The vest grips the body, providing great support and weight distribution. This allows the user to move much more rapidly and freely whilst in the field.The Portabrace ATV-Z8 is compatible with the Zoom F8. The use of these powerful mixers combined with dual wireless systems creates a lightweight and compact rig capable of recording multiple tracks on the run. This tactical vest is the perfect option for any ENG or fast-paced reality and documentary mixer.The long list of features includes: a modular iPad pouch, an innovative new boom clip, a removable pouch that can attach to either the front or back, a separate modular phone/pen holder, which is interchangeable with the iPad sleeve. In addition, there is an NP1 pocket situated under the mixer and a double vinyl rain cover that opens up and acts as a pouch. Form-fitting design stabilizes equipment close to your body, even when on the move Durable, 1000-denier Cordura Nylon construction Boom pole clip provides convenience and rest when not recording Swap out integrated tablet pouch or phone/accessory pouch Modular design adds additional storage if needed Equipment CoveredZoom F8Package includes1 x Tactical Vest and custom case 1 x ATV-BMPH Boom pole clip 1 x ATV-PHP Cell phone pouch 1 x ATV-POUCH Extra front pouch

Porta Brace BC-1N HDSLR Backpack The Portabrace Backpack Camera Case can carry camera, tripod, accessories and up to 17" lap top computer. Padded, bendable divider kit and padded pillows organize and protect camera and accessories. Exterior tripod sleeve and cinch keep tripod securely in place while carrying case on your back. This back back includes the following, Camera Cinch Strap, Camera Cradle, Stuffer Block, 5x9 Ridged Divider, 5x9 Bendable Divider, Medium Sized Suffer Pillow, PB-B6 Pouch, PB-B9 Pouch PB-LCP-4” Lens Cup. Porta Brace Backpack features Breathable mesh back and lumbar supportDeep Interior for matte box and follow focusDivider kit internal set up allows you to adjust easily and oftenExtra foam padded, non-slip strapsPadded laptop pocketSide tripod pocket with cinchTripod Pocket BC-1 HDSLR Data Weight 2.38 kgInterior 8.10 cm x 13.34 cm x 25.40 cmExterior 45.72 cm x 30.48 cm x 30.48 cm Equipment covered Blackmagic Design Cinema CameraCanon DSLR CamerasHasselblad DSLR CamerasMamiya DSLR CamerasNikon DSLR CamerasOlympus DSLR CamerasPanasonic DSLR CamerasPentax DSLR CamerasSamsung DSLR CamerasSony DSLR Cameras BC-1N Model includes 1 x CS-CR-Cinch Camera Cradle Tie-down1 x CC-Stuffer Detachable Foam Block1 x DS-5x42 Soft 5"x 42" Bendable Snake Divider1 x PB-B6 6-inch Padded Pouch1 x CS-B9 9-inch Padded Pouch1 x PB-LC4 4-inch Lens Pouch1 x PB-BSMP Small Stuffed Pillow1 x WBC White Balance Card

Porta Brace BC-1N HDSLR Backpack The Portabrace Backpack Camera Case can carry camera, tripod, accessories and up to 17" lap top computer. Padded, bendable divider kit and padded pillows organize and protect camera and accessories. Exterior tripod sleeve and cinch keep tripod securely in place while carrying case on your back. This back back includes the following, Camera Cinch Strap, Camera Cradle, Stuffer Block, 5x9 Ridged Divider, 5x9 Bendable Divider, Medium Sized Suffer Pillow, PB-B6 Pouch, PB-B9 Pouch PB-LCP-4” Lens Cup. Porta Brace Backpack features Breathable mesh back and lumbar supportDeep Interior for matte box and follow focusDivider kit internal set up allows you to adjust easily and oftenExtra foam padded, non-slip strapsPadded laptop pocketSide tripod pocket with cinchTripod Pocket BC-1 HDSLR Data Weight 2.38 kgInterior 8.10 cm x 13.34 cm x 25.40 cmExterior 45.72 cm x 30.48 cm x 30.48 cm Equipment covered Blackmagic Design Cinema CameraCanon DSLR CamerasHasselblad DSLR CamerasMamiya DSLR CamerasNikon DSLR CamerasOlympus DSLR CamerasPanasonic DSLR CamerasPentax DSLR CamerasSamsung DSLR CamerasSony DSLR Cameras BC-1N Model includes 1 x CS-CR-Cinch Camera Cradle Tie-down1 x CC-Stuffer Detachable Foam Block1 x DS-5x42 Soft 5"x 42" Bendable Snake Divider1 x PB-B6 6-inch Padded Pouch1 x CS-B9 9-inch Padded Pouch1 x PB-LC4 4-inch Lens Pouch1 x PB-BSMP Small Stuffed Pillow1 x WBC White Balance Card

Porta Brace BK-1HDVThe BK-1HDV Backpack is designed to hold a small compact HD camera and accessories. The case is made using abrasion-resistant 1000-denier Cordura nylon material. The frame is made using a lightweight, 1-inch thick foam for extra protection for the camera and other contents. The interior is lined with soft Veltex material that prevents scratching of equipment and also allows the interior padded dividers to be placed in any position throughout the interior. The Veltex acts as a connector for the Velcro tips of the padded dividers.The BK-1HDV strap system allows you to use the comfortable backpack straps. The straps have thick padding and are lined with soft mesh material to maximize air-flow between the backpack and your body. The backpack straps tuck away when not in use. There is a side pouch that carries small tripods and exterior pockets to hold additional accessories. There is also an interior pouch for a tablet computer (iPad compatible) with a clear vinyl cover so the tablet can be used while in the case. Thick padding and soft interior lining Tripod carrying pouch and cinch system Tablet pouch that allows the tablet to be used while stored Comfortable straps and suede leather handle for carryingUse as backpack or slingerThick padding and soft interior liningTripod carrying pouch and cinch systemTablet PC storage pouchComfortable backpack strapsDimensionsInterior: 40.64 x 25.4 x 18.42 cm Exterior: 53.34 x 38.1 x 24.13 cm Weight: 1.91 kgPackage Includes2x DK-C26LENS Padded Flexible Dividers 2x CS-B9 Padded Pouches 1x WBC White balance Card1x CS-CR-CINCH Camcorder Cinch 3x 5" x 3" Padded Dividers 1x CARA-BRNZ Carabiner Flashlight

Porta Brace BK-2NR The Porta Brace BK-2NR is larger than the BK-1and has more depth inside the case to accommodate for larger compact HD cameras and includes 15 pockets for storage. The straps on the backpack have a pull over cover to tuck away the straps for more compact storage on air planes and transport. The backpack has 15 pockets 1 x Laptop Zipper Pocket2 x Side Hook n Loop Pockets1 x Side Mesh Pocket3 x Side Slip Pockets1 x Front Mesh Pocket1 x Front Clear Vinyl ID Window1 x Front Hook n Loop Pock w/ Interior Slip Pocket4 x Clear Vinyl Zipper Pockets located inside the case1 x Tripod pocket with Cinch Strap The backpack includes: 7'' × 11'' soft divider, 7'' × 11'' ridged divider, Camera cradle, Cinch strap, PB-B6 Pouch, PB-B9 Pouch, PB-BSMP Small Pillow, LI-GLW Interior Light Pocket and a White Balance Card. Equipment covered Canon XF300, Canon XF305, Canon XH-A1, Canon XH-G1Panasonic AG-AF100, Panasonic AG-AF1001, Panasonic AG-DVC80, Panasonic AG-DVC80H, Panasonic AG-DVX100, Panasonic AG-DVX100A, Panasonic AG-DVX100B, Panasonic AG-DVX100P, Panasonic AG-DVX102B, Panasonic AG-DVX202, Panasonic AG-HMC150, Panasonic AG-HMC40, Panasonic AG-HMC70, Panasonic AG-HMC71E, Panasonic AG-HMC72, Panasonic AG-HMC74, Panasonic AG-HPX171, Panasonic AG-HVX200, Panasonic AG-HVX200ARED ScarletSony DSR-PD150, Sony DSR-PD170, Sony HDR-AX2000, Sony HDR-FX1, Sony HVR-V1U, Sony HVR-Z1U, Sony HVR-Z5U, Sony HVR-Z7U, Sony HXR-NX5U, Sony PMW-EX1, Sony PMW-EX1R, Sony PMW-F3

Porta Brace BK-C200The BK-C200 is a streamlined, comfortable camera backpack solution for your Canon C300 camera setup.Durable ConstructionMade using abrasion-resistant 1000-denier, military-grade Cordura NylonOur material is treated with an extra layer of water-resistant coatingUltra-lightweight semi-rigid frame offers maximum protection without being heavyWater-proofed nylon-bonded triple-tacked stitching for superior water-resistancyDurable YKK zippers, reverse-sewn for extended zipper lifeLarge Carrying CompartmentSoft, semi-rigid foam walls lined with soft Veltex materialIncludes 3 padded, bendable dividers for customizing the interior setupA soft padded accessory pouch is included for protecting a spare lens or other accessoryA padded Lens Cup camera lens holder is also included and can be removed and worn on your beltComes with a Portabrace White Balance CardTablet storage compartment with viewing screenComfortable Harness SystemA layer of thick padding between your back and the bag provides extra comfort and support when carryingThick padded straps with waist and chest straps provide maximum comfort and stabilityStraps fold away for snag-free carrying during air-travel or transport in a vehicleAccessory StorageSeparate padded laptop compartment protects laptops up to 17-inchesFront slip pocket with press-pass / ID display windowSide-mounted tripod holder with cinchMesh water-bottle holderSmall accessory pocket ideal for sunglasses or cell phoneDimensionsInterior: 44.45 x 31.75 x 20.95 cm Exterior: 52.07 x 38.1 x 32.38 cm Weight: 2.4 kgEquipment CoveredCanon C200Package Includes3x DIV 7x3 Divider 2x DIV-7x13 Flexible Divider 1x CS-B9 Stuff Sack 1x PB-4LCS 4" Padded Lens Cup 1x CC-STUFFER Stuffer Pillow 1x WBC White Balance Card

Porta Brace BK-FX6The BK-FX6 is a streamlined, comfortable camera backpack solution for your Sony FX6 camera setup.Durable ConstructionMade using abrasion-resistant 1000-denier, military-grade Cordura NylonOur material is treated with an extra layer of water-resistant coatingUltra-lightweight semi-rigid frame offers maximum protection without being heavyWater-proofed nylon-bonded triple-tacked stitching for superior water-resistancyDurable YKK zippers, reverse-sewn for extended zipper lifeLarge Carrying CompartmentSoft, semi-rigid foam walls lined with soft Veltex materialIncludes 3 padded, bendable dividers for customizing the interior setupA soft padded accessory pouch is included for protecting a spare lens or other accessoryA padded Lens Cup camera lens holder is also included and can be removed and worn on your beltComes with a Portabrace White Balance CardTablet storage compartment with viewing screenComfortable Harness SystemA layer of thick padding between your back and the bag provides extra comfort and support when carryingThick padded straps with waist and chest straps provide maximum comfort and stabilityStraps fold away for snag-free carrying during air-travel or transport in a vehicleAccessory StorageSeparate padded laptop compartment protects laptops up to 17-inchesFront slip pocket with press-pass / ID display windowSide-mounted tripod holder with cinchMesh water-bottle holderSmall accessory pocket ideal for sunglasses or cell phoneDimensionsInterior: 44.45 x 31.75 x 20.95 cm Exterior: 52.07 x 38.1 x 32.38 cm Weight: 2.4 kgEquipment CoveredSony FX6 Full-Frame Cinema CameraPackage Includes3x DIV 7x3 Divider 2x DIV-7x13 Flexible Divider 1x CS-B9 Stuff Sack 1x PB-4LCS 4" Padded Lens Cup 1x CC-STUFFER Stuffer Pillow 1x CS-CR-Cinch Camera Tie-Down

Porta Brace BK-FX6OR Backpack Camera CaseThe BK-FX6OR Backpack Camera Case with Wheels now combines the Shoot-Ready rigid frame protection with our smooth-rolling, off-road wheel system. The case is made of abrasion-resistant 1000-denier Cordura material. It has a rigid, hollow-core (leightweight) plastic frame, and thick etha-foam padding. The case interior has a Veltex lining, which is extra-soft against sensitive equipment. The copper interior color makes it easier to view equipment and accessories inside the case. The case can carry FX6 rigs up to 18-inches in length along with accessories, a laptop, and tripod. The case has a padded pocket that will hold a 17-inch laptop computer, side tripod pocket with a cinch strap, camera cradle and additional accessory pockets. It includes a CS-B9 pouch, PB-BSMP small pillow, CC stuffer block and a white balance Card. The backpack has extra foam padding and non-slip material on the shoulder, removable waist straps, and padded side support straps. The BK-FX6OR has smooth-rolling, off-road wheels with ball-bearings and solid steel axles for added strength. The wheels are also removeable to help prevent damage during air-travel. Breathable mesh back and lumbar support Divider kit internal set up allows you to adjust easily and often Extra foam padded, non-slip straps Padded laptop pocket Side tripod pocket with cinch Strap hideaway coverDimensionsInterior: 48.26 x 30.48 x 20.32 cm Exterior: 58.42 x 47.63 x 40.64 cm Weight: 5.2 kgEquipment CoveredSony FX6Package Includes1x CS-B9 Cam-Corder Stuff Sack 1x CS-CR-CINCH Cam-Corder Cinch 1x WBC White Balance Card 1x CS-CR-U Cam-Corder Cradle 1x DIV-7X11 Divider 7-inches X 11-inches 1x PB-BSMP Small Pillow

Porta Brace BK-PHANTOM4 Backpack for DJI Phantom 4 SKU: BK-PHANTOM4 It includes a custom padded divider system that keeps the drone and accessories secured and organized inside the backpack. There’s an interior mesh pocket to hold propeller blades and a clear vinyl pocket that holds a tablet computer while allowing viewing and use of the tablet touch-screen.   The exterior of the backpack for DJI Phantom 4 has a molle system to attach additional accessory pouches.  The molle system also provides the ability to attach the drone to the outside of the pack for fast access during field-production. One side of the backpack has a mesh water bottle holder and a mobile phone / small accessory pouch.  The other side as a unique removable pouch that holds a DJI OSMO or similar hand-held gimble.  The pouch can be removed and worn as a holster on your belt or a Portabrace Video Belt (sold separately). BK-PHANTOM Features Custom sized for DJI Phantom 4 Quadcopter DroneComfortable, fully adjustable mesh backpack strapsInterior tablet compartmentRear laptop compartmentBonus DJI OSMO removable holster pouchFully adjustable interior divider system, compartments, and pockets sized specifically for Phantom accessoriesRugged Portabrace Platinum Cordura brand nylon material and thick padded foams for superior protectionInterior space for DSLR camera, lens, etc. For DJI Phantom 2DJI Phantom 3DJI Phantom 4 Dimensions Interior: 44.45 x 31.75 x 20.95 cmExterior: 52.07 x 38.1 x 32.38 cmWeight: 2.4 kg

Porta Brace BK-PHANTOM4B Backpack for DJI Phantom 4 SKU: BK-PHANTOM4B It includes a custom padded divider system that keeps the drone and accessories secured and organized inside the backpack. There’s an interior mesh pocket to hold propeller blades and a clear vinyl pocket that holds a tablet computer while allowing viewing and use of the tablet touch-screen.   The exterior of the backpack for DJI Phantom 4 has a molle system to attach additional accessory pouches.  The molle system also provides the ability to attach the drone to the outside of the pack for fast access during field-production. One side of the backpack has a mesh water bottle holder and a mobile phone / small accessory pouch.  The other side as a unique removable pouch that holds a DJI OSMO or similar hand-held gimble.  The pouch can be removed and worn as a holster on your belt or a Portabrace Video Belt (sold separately). BK-PHANTOM Features Custom sized for DJI Phantom 4 Quadcopter DroneComfortable, fully adjustable mesh backpack strapsInterior tablet compartmentRear laptop compartmentBonus DJI OSMO removable holster pouchFully adjustable interior divider system, compartments, and pockets sized specifically for Phantom accessoriesRugged Portabrace Platinum Cordura brand nylon material and thick padded foams for superior protectionInterior space for DSLR camera, lens, etc. For DJI Phantom 2DJI Phantom 3DJI Phantom 4 Dimensions Interior: 44.45 x 31.75 x 20.95 cmExterior: 52.07 x 38.1 x 32.38 cmWeight: 2.4 kg

Porta Brace BK-ZCAME2 BackpackThe BK-ZCAME2 Backpack is designed to hold a small compact HD camera and accessories. The case is made using abrasion-resistant 1000-denier Cordura nylon material. The frame is made using a lightweight, 1-inch thick foam for extra protection for the camera and other contents. The interior is lined with soft Veltex material that prevents scratching of equipment and also allows the interior padded dividers to be placed in any position throughout the interior. The Veltex acts as a connector for the Velcro tips of the padded dividers.The BK-ZCAME2 strap system allows you to use the comfortable backpack straps. The straps have thick padding and are lined with soft mesh material to maximize air-flow between the backpack and your body. The backpack straps tuck away when not in use. There is a side pouch that carries small tripods and exterior pockets to hold additional accessories. There is also an interior pouch for a tablet computer (iPad compatible) with a clear vinyl cover so the tablet can be used while in the case. Thick padding and soft interior lining Tripod carrying pouch and cinch system Tablet pouch that allows the tablet to be used while stored Comfortable straps and suede leather handle for carryingDimensionsInterior: 40.64 x 25.4 x 18.42 cm Exterior: 53.34 x 38.1 x 24.13 cm Weight: 1.91 kgPackage Includes2 - DK-C26LENS Dividers 2 - CS-B9 Pouch 1 - WBC White balance Card 1 - CS-CR-CINCH Camcorder Cinch 3 - DIV5x3 5" x 3" Dividers 1 - CARA-BRNZ Carabiner w/ Flashlight

Portabrace Soft Backpack Camera Case BKS-2XMThe Portabrace Soft Backpack Camera Case (BKS-2XM) is a "flexible" carrying system that adapts to your changing equipment needs. From a simple DSLR camera and lens to a full rig with tripod and laptop, the BKS-2XM will keep your gear organized and protected. The case's unique design expands in both length and depth to accomodate a wide range of equipment sizes.Customize the interior divider kit again and again as your equipment needs change. There's a tripod pocket and cinch on one side, a large storage pocket on the other, and a padded laptop pouch that can hold laptops up to 17". Constructed using 1000-denier Cordura fabric, the BKS-2XM is both flexible and durable, ideal for travel and field work. The BKS-2XM meets most airline carry-on requirementsFeaturesExpandable length and depthComfortable, padded shoulder strapsProtective laptop pocket, up to 17"Tripod pocket with cinchCustomizable interior divider systemDimensionsInterior: 63.5 x 41.9 x 26.7 cmWeight: 2.3 kgEquipment CoveredCanon XA10, Canon XA20, Canon XA25, Canon XF100, Canon XF105, Canon XF200, Canon XF205, Canon XF300, Canon XF305JVC GY-HM150, JVC GY-HM600, JVC GY-HM650, JVC GY-HM70, JVC GY-HM710, JVC GY-HM750, JVC GY-HMQ10, JVC GY-HMZ1UPanasonic AG-3DA1, Panasonic AG-AC130, Panasonic AG-AC160, Panasonic AG-AC7, Panasonic AG-AC90, Panasonic AG-HMC150, Panasonic AG-HMC40, Panasonic AG-HPX170, Panasonic AG-HPX250, Panasonic AG-HPX255, Panasonic AJ-PX270, Panasonic HC-X1000, Panasonic HDC-Z10000Sony HVR-A1U, Sony HVR-Z5U, Sony HVR-Z7U, Sony HXR-MC2000, Sony HXR-NX3/1, Sony HXR-NX30, Sony HXR-NX5, Sony HXR-NX70, Sony PMW-100, Sony PMW-150, Sony PMW-160, Sony PMW-200, Sony PMW-300K1, Sony PMW-EX3, Sony PMW200, Sony PXW-FS7, Sony PXW-X180, Sony PXW-X200, Sony PXW-X70Package Includes1x CS-CR-CINCHCam_Corder Cinch1x CS-CR-U Cam-Corder Universal Cradle4x DIV-5X3 3" Copper Divider1x DK-C2550DSLR Long Divider for PB-2550DSLR2x DK-C26LENS Long Divider for PB-26LENS

Porta Brace BOOM-POLE35The Boom pole Case is made of 1000-denier Cordura nylon and has a padded interior. It has a wide mouth opening for easy access to boom poles. The case also has interior reinforcing bars to keep it rigid.There are exterior pockets for carrying cables and other audio accessories. Inside the case there's tie-down strap to keep the boom poles in place during transit. There's also a rigid-foam padded bottom and anti-skid waterproof bottom panel for added protection. There's an HB-1040, padded, suede leather shoulder strap for carrying the case over your shoulder. The BOOMPOLE-35 also comes with suede leather covered carrying handles and suede leather covered haul handles on the sides.Padded soft case Comfortable shoulder strap included Anti-skid waterproof bottom panel Easy-open for quick access Durable, 1000-denier Cordura materialDimensionsDimensions Interior: 99.1 x 22.9 x 20.3 cm Exterior: 101.6 x 27.9 x 22.9 cm Weight: 2.3 kgPackage Includes1x HB-1040 Suede Shoulder Strap

Porta Brace BOOMPOLE-SLEEVEStore, transport, and protect your boompole or other gear up to 35 inch long with the black Soft Carrying Case from Porta Brace. Audio crews will appreciate the rigid, easy-access, wide-mouth zippered opening and the durable, padded, 1000D Cordura nylon construction. This case has an anti-skid, waterproof bottom panel to keep your gear safe when on the ground. Large exterior pockets provide handy storage for accessories, and the interior tie-down strap secures your gear. The case can be carried comfortably by the dual, suede-covered top handles or worn with the included shoulder strap.For boompoles up to 35" long 1000-denier Cordura case with padded interior and a wide-mouth, easy-access opening Interior reinforcing bars maintain rigidity Full-width, front-zippered pocket with ID window Anti-skid, waterproof bottom panel protects your gear Carrying Options Heavy-duty padded, suede leather shoulder strap Dual top handles