14.8 V / 6.6 Ah / 99 Wh 5-way LED capacity indicator Cells from Samsung With Anton Bauer connector and 2.3 mm socket Built-in safeguards against overload, short circuit, over-discharge USB Output: 5V / 2.1A
General
Dimensions (WxHxD) 8.47 cm x 4.83 cm x 14.13 cm Weight 700 g
Core SWX Hypercore NEO 9 Mini V-mt
SKU: NEO-9S
The Hypercore NEO Mini 9 is the most complete 98wh, 14v Lithium Ion battery pack on the market. Encompassing all the original features of the award winning Hypercore line, with additional features exclusive to NEO.
As with other Core SWX packs, the Core SWX NEO pack is microprocessor-driven, making them safer as well as supporting the transmission of runtime and percentage data to your camera’s viewfinder or LCD. That same data can also be viewed on the new multipurpose, intuitive backlit LCD on the front of the battery packs. The LCD is multipurpose as it provides remaining runtime based on a 30W dummy load while not in-use, a remaining down to the minute runtime while connected to the device you’re powering, and it even provides remaining charge time while connected to a charger.
Further leveraging the microprocessor, the NEO packs have an RFID transmitter on the front of the packs, so you can easily grab all your battery data stored from the pack on your phone via our VoltBridgeID app available in the app store.
Not only was the NEO line constructed similar to Helix with the new LCD and RFID, it was also constructed in a modular design like Helix, which reduces cabling and maximizes product integrity. The pack is put together like building blocks within a very small battery housing, reducing the chance of a failure due to a drop or multiple drops. The modular design also makes it very easy to service as the components are plug and play.
Knowing 10A load delivery doesn’t cut it anymore; the NEO packs have an upgraded cell architecture which can sustain up to 16A peak loads, 12A continuous. In addition, there is SmartTap on the pack allowing you to power any 12vdc device from the p-tap port while also being able to transmit battery data if the device you are using is able to communicate that information. There is also a 5v USB for charging mobile devices, but also offers additional functionality as a fully function firmware upgrade port, so you will never be left behind as we continue to develop.
Lastly, as with all Core SWX battery packs, they are the most charger compatible on the market. The V-mount offerings will charge on RED, IDX, Sony, etc., and the Gold mount offerings will charge on Anton/Bauer chargers.
98wh, 14v Lithium Ion battery16A Peak / 12A continuous loadRFID Voltbridge dataTotally new internal build, more robust and easier to serviceSMBUS & RED Data communication to camera‘Helix’ style LCDGold and V-Mount versions available
Axcom U-SVLO-190-UD
Axcom U-SVLO-190 Li-Ion V-Mount Battery 14,8V 190 Wh
Features
14.8 V / 13 Ah / 190 Wh3-way LED capacity indicatorCells from SamsungWith D-Tap connector and 2.3 mm socketBuilt-in safeguards against overload, short circuit, over-discharge
General
Dimensions (WxHxD): 10.1 cm x 6.3 cm x 15.2 cmWeight: 1.25 kg
Axcom U-SVLO-150-UD
Axcom U-SVLO-150 Features
14.8 V / 10 Ah / 150 Wh3-way LED capacity indicatorCells from SamsungWith D-Tap connector and 2.3 mm socketBuilt-in safeguards against overload, short circuit, over-discharge
General
Dimensions (WxHxD): 10.1 cm x 5.7 cm x 15.2 cmWeight: 1.09 kg
Axcom U-SVLO-230U
The price / performance ratio is excellent when it comes to the Axcom company.
The professional 230 Wh V-Mount battery Axcom U-SVLO-230, is an Samsung-quality cell battery. It ensures stability and impresses with a relatively low weight. The four-stage LED display indicates the current battery charge status. Equipped with a D-Tap output (P-TAP), and a DC output connector.
U-SVLO-230 Technical data
High-quality Samsung cellsCompatible with major camcorders on the market such as Panasonic VariCam, Sony PMW-F5 / F55, ARRI Amira / AlexaType: Li-Ion batteryD-TAP (P-TAP) output, DC outputVoltage: 14.8 VCapacity: 15,6Ah / 230WhOperating Temperature: -20 ° C to + 55 ° C
PATONA Dual V-Mount Charger
The PATONA Dual V-Mount charger f. Sony is able to charge two batteries, simultaneously, quickly and independently of each other. It doesn´t matter if the two batteries have the same capacity. This device has a DC XLR-Output where compatible third party devices can be operated and charged. If the XLR output is used, the batteries can´t be charged at the same time. The charger can also be used as a backup power supply without AC power connection. Furthermore the XLR connector can be used to power a third-party device when charged batteries are inserted. The integrated, microcontroller-guided charging technology automatically detects the required voltage of the inserted battery and prevents overcharging or overheating. The charger has a wing stand to maintain a compact design that nevertheless a secure stand is guaranteed. This V-mount system for batteries is a standard that will probably be used more and more in cameras and camcorders the next years. This charger is compatible with all batteries based on the V-Mount system. Important information like Connected AC mains connection, inserted batteries and charging or discharging of connected batteries are shown by multicolor LEDs.
Technical specifications
Input: AC 100V-240V 50 / 60Hz 2A (max) Output: DC 16.5V / 4.5A (4 pin XLR connector) Output: 16.8V / 3A x1 | 16.8V / 2A x2
In the box
1x Dual V-Mount charger 1x power cable 1x 3m 4 pin XLR cable
Axcom SM-CPVM-4
V-Mount battery charger of the german manufacturer axcom with 4 slots to charge four V-Mount batteries simultaneously.
Axcom SM-CPVM-4 with a 4 Pin XLR Output (60W 15V 4.0A). The weight is 2,8kg.
Includes
1 x Charger1 x Mains cable1 x XLR extension cable1 x Manual
Features
Input: 90V - 240VOutput for V-Mount Batteries: 16.8V 2.5AOutput 4 Pin XLR: 60W 15V 4.0A
Charging times
4.4Ah approximately 2,7 hours6.6Ah approximately 4,0 hours8.8Ah approximately 5,3 hours11Ah approximately 6,6 hours13,2Ah approximately 7,9 hours
Anton Bauer PowerTap Multi
Male PowerTap to 4 Female PowerTap receptacles.
Expands any Gold Mount PowerTap to accommodate up to four separate devices. Anton Bauer PowerTap Multi is perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery (10 amp max total).
Axcom SM-CPVM-2
2-Slot V-Mount Battery Charger of the german manufacturer axcom with 2 slots to charge two V-Mount batteries simultaneously. With a 4 Pin XLR Output (60W 15V 4.0A). The weight is 1kg.
Axcom SM-CPVM-2 includes charger, mains cable, XLR extension cable and manual.
Input: 90V - 240VOutput for V-Mount Batteries: 16.8V 2.65AOutput 4 Pin XLR: 60W 15V 4.0A
Charging times
4.4Ah approximately 2,5 hours6.6Ah approximately 3,8 hours8.8Ah approximately 5,0 hours11Ah approximately 6,3 hours13,2Ah approximately 7,6 hours
Core SWX Powertap Breakout Adapter
PTM-3PTF
The PTM-3PTF is a powertap breakout cable tripling the number of female powertap outputs available from any battery mount plate. It is perfect for powering multple accessories and can handle up to 10A.
€59.00*
gross: €70.21
Pay with:
We ship with:
Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Hotline +49 211 930 730-33
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Private machine identifier cookie:
Security token to identify the private machine.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
Google Pay payments
Amazon Pay
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
PayPal payments
CAPTCHA integration
Timezone:
The cookie is used to provide the system with the user's current time zone.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Amazon Pay:
The cookie is used for payment transactions via Amazon.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Sendinblue:
Sendinblue tracker
Allows Google to collect personal data for online advertising and marketing.
Google Advertising
Google Advertising
Google Advertising
Service cookies are used to provide the user with additional offers (e.g. live chats) on the website. Information obtained via these service cookies may also be processed for site analysis.
Doofinder:
The cookie is used to track user interaction with the site search. The data can be used to optimize the search function.
YouTube video
YouTube video
YouTube video
Wishlist
Local Storage:
Stores a timestamp to hide elements for a certain time if desired.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Marketing cookies are used by third-party vendors or publishers to display personalized advertisements. They do this by tracking visitors across websites.
Google Ads:
Dieses Cookie wird gesetzt, wenn ein User über einen Klick auf eine Google Werbeanzeige auf die Website gelangt. Es enthält Informationen darüber, welche Werbeanzeige geklickt wurde, sodass erzielte Erfolge wie z.B. Bestellungen oder Kontaktanfragen der Anzeige zugewiesen werden können.
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Bing Ads:
This cookie is used by Bing to gather anonymous information on how visitors are using the website.
Cookies used for statistics and shop performance metrics.
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.