Wooden Camera Quick Back v2

Wooden Camera C-Box (Converter, D-Tap) SKU: 176200 C-Box (Converter, D-Tap) accepts HDMI and 3G HD-SDI input, selectable via switch on operator's side, and outputs simultaneously three channels of HD-SDI and two of HDMI. The device draws power from the D-Tap of a battery or battery plate using the included cable. Each video output is independently reclocked and carries the same signal strength as the original. LED indicators are located on the operator's side to show status of power and signal. This version attaches between any V-Mount or QRC-style Gold Mount and wherever the plate was attached previously. For example, the Wooden Camera C-Box (Converter, D-Tap) can fit between the WC V-Mount (Epic/Scarlet) and the Quick Back v2. Another example would be attaching it between the WC Gold Mount (BMC) and the Battery Slide. C-Box Overview Power Input 4 pin mini-XLR, 12-24 VDC .5AIncluded 4" D-Tap to 4 pin mini-XLR cableLED indicator for Signal and Power on operator sideBolts to standard V-Mount, QRC-style Gold Mount, and RED/Blueshape mounting patternsStandard V-Mount, QRC-style Gold Mount, and RED/Blueshape plates can be bolted to the box itself1/4-20 holes on bottom allow for attachment of rod clamps, cheeseplates, and other accessoriesRe-clocks standard SD, HD and 3G SDI data ratesAuto bypasses non-standard SDI rates from 20Mbit/s to 3Gbit/sPasses SDI embedded audio and ancillary dataOperating Temperature 0 to +40 COperating Humidity 0 to 90% Non-Condensing Signal Information Data Types: SMPTE 259/292/424Data Rates: 19 Mbit/s through 3.0 Gbit/sRe-clocking Data Rates: 270 Mbit/s, 1.485 Gbit/s, 2.97 Gbit/sInput/Output Return Loss: > 15dB @ HD, > 12dB @ 3GInput Level: 800 mV P-P +/- 20%Input Impedance: 75 Ohms +/- 1%Output Level: 800 mV P-P +/- 5%Output Impedance: 75 Ohms +/- 1%Output Jitter: < 0.2 UI Other Notes A/C Adapter included2 positions available for mounting QRC-style power plates: high and lowHole pattern available for mounting common accessory V mount4 pin mini-XLR power connector same as TV Logic/Alphatron

Wooden Camera A-Lock SKU: 144500 Mount for Quick Back and REDmote. Use to hang Quick Back or REDmote in alternative configurations. Attaches via 1/4-20 screws. A-Lock Includes 2 x 1/4-20 x 3/8" screw Technical data Weight 42 gDimensions 47.7 mm x 40.3 mm x 10.3 mm

Wooden Camera WC V-Mount (Epic/Scarlet) SKU: 167000 Wooden Camera WC V-Mount plate utilizing an IDX V-Mount and RED Epic/Scarlet LEMO connector. This plate is wired correctly to display RED Brick and smart V-mount battery percentage on displays. 8" cable exits the right side of the plate allowing easy insertion into the camera. Design allows minimal cable excess while still being able to reach additional modules when necessary. 2x D-Tap ports for accessory power. WC V-Mount Mounting Options To mount the WC V-Mount onto the back of the Epic/Scarlet one of these items is required Quick Back v2 - a quick release plate that can attach to the back of the brain or any RED moduleFixed Back - a bolt on battery mount that can only attach to the brain