Wooden Camera Elite Accessory System for FUJIFILM GFX ETERNA 55

Wooden Camera Side Top Plate Extension for FUJIFILM GFX ETERNA 55SKU: A00969The Side Top Plate Extension mounts to the top of the camera via two 3/8”-16 screws, providing a secure base for additional accessories without covering the camera’s top dovetail. The Side Plate adds 1/4”-20 and 3/8”-16 mounting points along the top of the camera and a forward-facing mounting point that can be used with accessories like the Bolt-On Rods or the Dual Rod Clamp.Etching near the forward screw indicates the camera's film plane. While the Side Plate is installed, users can use the native top handle by sliding it along its channel on the camera, even with the plate installed. Blind holes are incorporated to prevent damage to the camera.This item is also compatible with the Rear and Front Top Plates for the FUJIFILM GFX ETERNA 55.SpecificationsWeight: 106.6 gDimensions: 152.7 x 32.5 x 18.8 mm

Wooden Camera Rear Top Plate Extension for FUJIFILM GFX ETERNA 55SKU: A00971The Rear Top Plate Extension is a versatile accessory that offers secure mounting, EVF access, and multiple mounting points. Using a single 3/8”-16 screw, this plate attaches to the camera body and top plate extensions.The Wooden Camera Rear Top Plate Extension can be used with the Front Plate, Side Plate, or Power Strip. Please Note: The Front Plate Extension and Power Strip or Side Plate Extension are required for stability. This item does not work properly on the camera alone.SpecificationsWeight: 129.7 gDimensions: 124.9 x 77 x 18.8 mm

Wooden Camera Side Rail for FUJIFILM GFX ETERNA 55SKU: A00914The Side Rail is a versatile mounting solution for camera accessories. It attaches securely to both the top and riser plate using 1/4”-20 screws, which can be tightened with a 3/16” hex tool. This rail provides multiple mounting points for your accessories, including both 1/4”-20 and 3/8”-16 threaded holes, ensuring compatibility with a wide range of NATO-compatible accessories. Its symmetrical design allows for use on either the left or right side of your camera setup, providing flexibility in your rig configuration.The NATO Rail incorporates enhanced safety features to protect both your accessories and your camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory. Additionally, blind holes prevent accidental damage to your camera body during installation or use. This Side Rail incorporates a Wooden Camera patented line of products, featuring their innovative dual safety NATO design for added security and peace of mind. SpecificationsWeight: 75.3 gDimensions: 158.7 x 28.5 x 27.4 mm

Wooden Camera Rear Side Rail for FUJIFILM GFX ETERNA 55SKU: A00907This Rear Side Rail attaches directly to the rear mounting points on the camera body after the camera's connector protection bracket is removed. Its four mounting points provide a secure connection to the camera body and protect the camera's ports. This rail incorporates 3/8"-16 and 1/4"-20 mounting points, as well as a NATO rail along the length, allowing for a wide range of accessories to be attached.The NATO Rail provides enhanced safety features to protect both accessories and the camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory. Through holes were designed to reduce weight and allow screw-in accessories, without causing damage to the camera body. This Rear Side Rail incorporates a Wooden Camera patented line of products, featuring our innovative dual safety NATO design for added security and peace of mind.SpecificationsWeight: 53.52 gDimensions: 123.7 x 31.9 x 29.8 mm

Wooden Camera Riser Plate for FUJIFILM GFX ETERNA 55SKU: A00901The Riser Plate features integrated ARCA rails, enabling quick transitions between bridge plates, Shoulder, and Steadicam setups that utilize our ARCA plates.Two front-facing 15mm LWS Rod Mounts allow for connecting lens motors and other accessories. Individual tie-down points for rods ensure a secure connection and prevent rod rotation. Note: The rod pass-through feature has been removed due to camera dimensions and optical center requirements.The plate attaches to the camera body via two 3/8”-16 screws, setting it at its optical center for bridge plates and proper alignment of lens accessories. Raised edges on the plate conform to the camera, and pins near the tie-in points prevent rotation. This plate also provides access to the front-facing knob and switch on the camera.In addition, a rear 1/4”-20 screw mounting point is designed to secure our D-Box™ for FUJIFILM GFX ETERNA 55 to the Riser using our D-Box Support Bracket, preventing accidental discharge of the D-Box from the camera’s V-Mount during operation.Weight: 355.2 gDimensions: 192 x 127.2 x 17 mm

Wooden Camera Side Rail Kit for FUJIFILM GFX ETERNA 55SKU: 50-K10004Our Side Rail Kit attaches securely to both the Side and Rear Top Plate as well as the Riser Plate. It creates a secure camera base with extra mounting points on the sides allowing users to customize their camera setup with accessories. The rail incorporates enhanced safety features to protect both accessories and the camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory.Additionally, blind holes are strategically placed to prevent accidental damage to your camera body during installation or use with 1/4”-20 or 3/8”-16 mounted accessories. These Side Rails incorporate a Wooden Camera patented line of products, featuring their innovative dual safety NATO design for added security and peace of mind.SpecificationsWeight: 150.6 gDimensions: 158.7 x 57 x 27.4 mmIncludesA00914 Side Rail for FUJIFILM GFX ETERNA 55 2x

Wooden Camera Base Plate System for FUJIFILM GFX ETERNA 55SKU: 50-K10003Our Base Plate System offers a secure, quick-release attachment point below the base for easy transitions between setups. The ARCA-compatible Base Plate provides versatile mounting, allowing direct attachment of our Studio Bridge Plates and, when removed, connections to our ARCA Steadicam Plate and ARCA Shoulder Plate.The Riser Plate features an integrated ARCA dovetail, enabling quick transitions between setups that utilize our ARCA plates. Two front-facing 15mm LWS Rod Mounts allow for connecting accessories, and individual tie-down points for rods ensure a secure connection.The plate attaches to the camera body via two 3/8”-16 screws, setting it at its optical center for bridge plates and proper alignment of lens accessories. This plate also provides access to the front-facing knob and switch on the camera. Additionally, a rear ¼”-20 screw mounting point is designed to secure our D-Box™ to the Riser, preventing accidental discharge.SpecificationsWeight: 548.8 gDimensions: 199.8 x 248.5 x 22.1 mmIncludesA00233 ARCA Base PlateA00901 Riser Plate for FUJIFILM GFX ETERNA 55

Wooden Camera Core Accessory System for FUJIFILM GFX ETERNA 55SKU: 50-K10002This Core System was designed to allow users a solid but lightweight foundation to attach accessories to their camera while accommodating the native handle. The Riser Plate features dual 15mm rod mounts, which are compatible with industry-standard rod-based accessories, allowing for easy mounting of follow focus systems, matte boxes, and other essential tools. Additionally, the ARCA-compatible Base Plate allows for direct attachment of ARRI Standard Studio Bridge Plates, expanding rigging possibilities.The integrated ARCA rails on the Riser Plate allow for effortless switching between different camera support systems, such as tripods, handheld, and Steadicam, without the need for time-consuming reconfiguration. The included Side Rails offer strategic enhanced accessory attachment options.The Rear Side Rail attaches directly to the camera body, while the Side Rail can be mounted securely to both the Top Side and Riser Plate. Both rails provide the option of NATO, 1/4”-20 and 3/8”-16 mounting points, allowing you to customize your setup with monitors, microphones, lights, and other accessories.SpecificationsWeight: 920.8 gDimensions: 199.8 x 380 x 22.1 mmIncludesA00907 Rear Side Rail for FUJIFILM GFX ETERNA 55A00969 Top Plate Side Extension for FUJIFILM GFX ETERNA 55A00914 Side Rail for FUJIFILM GFX ETERNA 5550-K10003 Base Plate System for Fujifilm GFX ETERNA

Wooden Camera Front Top Plate Extension for FUJIFILM GFX ETERNA 55SKU: A00970The Front Top Plate Extension was designed for users who solely need the Power Strip functionality. It provides a forward-facing 3/8”-16 mounting point and allows the use of the Native Top Handle, while adding mounting points on the camera.This extension securely connects to the Side Plate or Power Strip. The design features etchings indicating the camera's film plane and a single tie-down point for securing it to the camera. This accessory also includes side mounting points for attaching additional accessories, like a Side Rail, and blind holes to prevent damage to the camera.This item is also compatible with the Rear and Side Plates for the FUJIFILM GFX ETERNA 55. Consider adding a Side or Rear Extension for increased stability. Please note: The Power Strip or Side Plate Extension is required for stability. This item does not work properly on the camera alone.SpecificationsWeight: 58.06 gDimensions: 76.8 x 41.1 x 14.5 mm

Wooden Camera Top Plate System for FUJIFILM GFX ETERNA 55SKU: K10007This versatile 3-part modular design allows users to optimize their camera rig by offering multiple configurations. This design includes a Side Plate, Front Plate, and Rear Plate – these can be used together in different configurations, depending on the needs of the shoot.Examples of different configurations: the Side Plate can be detached to provide clearance for the Power Strip, and the Rear Plate can be removed to use the native handle. This ensures that you can use our Top Plate System regardless of the accessories needed on your camera.The Top Plate System adds a multitude of 1/4”-20 and 3/8”-16 mounting points across the top of the camera. Using the forward-facing mounting points on the Side and Front of the plate, users can mount a wide array of accessories, such as Bolt-On rods or the Dual Rod clamp.To safeguard the camera from potential damage caused by overtightened or improperly installed accessories, the Top Plate System incorporates blind holes, preventing screws from being inserted too far. Four tie-down points can secure the Top Plate to the camera.IncludesA00970 Front Top Plate Extension for FUJIFILM GFX ETERNA 55A00969 Side Top Plate Extension for FUJIFILM GFX ETERNA 55A00971 Rear Top Plate Extension for FUJIFILM GFX ETERNA 55