SHAPE Sony FX3/FX30 CageSKU: FX3CAGE CNC-milled aluminum cage specifically designed to protect and support the Sony FX3/FX30. Includes a cold shoe, ARRI rosette, seven 3/8-16 threaded mount points, and multiple 1/4-20 threaded mount points. The cage design allows access to all camera controls and side outputs, as well as memory cards, battery compartment, lens release, doors, locks, and hot shoe. In addition,A detachable lock protection system to secure and hold in place your 4K FULL HDMI cable is included with the cage. Also included is a top plate with a left-hand threaded ARRI hole patterns that fits on top of Sony’s factory handle. The cage can be fitted with a quick release tripod plate or DELTA adapter. FeaturesFits Sony FX3/FX30Onesided cage with multiple mount pointsARRI rosette on left side to mount compatible accessoriesRemovable HDMI protector to prevent damage to HDMI connector Technical dataWeight: 0,41 kgDimensions: 20,32 x 11,43 x 6,99 cm

SHAPE Sony FX3/FX30 Cage 15mm LW Rod SystemSKU: FX3RODCNC-milled aluminum cage specifically designed to protect and support the Sony FX3/FX30. Includes a cold shoe, ARRI rosette, seven 3/8-16 threaded mount points, and multiple 1/4-20 threaded mount points.The cage design allows access to all camera controls and side outputs, as well as memory cards, battery compartment, lens release, doors, locks, and hot shoe. In addition, A detachable lock protection system to secure and hold in place your 4K FULL HDMI cable is included with the cage. Also included is a top plate with a left-hand threaded ARRI hole patterns that fits on top of Sony’s factory handle. The cage can be fitted with a quick release tripod plate or DELTA adapter. FeaturesFits Sony FX3/FX30Onesided cage with multiple mount pointsARRI rosette on left side to mount compatible accessoriesRemovable HDMI protector to prevent damage to HDMI connectorQuick Release 15mm LWS Rod Base SystemDelta plate included to be mounted on the quick releaseAdjustable Metabones Bracket1 pair of 18” 15 mm RodsErgonomic mini top plate to fit on Sony’s factory top handleTechnical dataWeight: 0,86 kgDimensions: 20,32 x 17,78 x 25,40 cm

SHAPE Sony FX3/FX30 Shoulder MountSKU: FX3SMSony FX3/FX30 Cage (FX3CAGE)CNC-milled aluminum cage specifically designed to protect and support the Sony FX3/FX30. Includes a cold shoe, ARRI rosette, seven 3/8-16 threaded mount points, and multiple 1/4-20 threaded mount points. The cage design allows access to all camera controls and side outputs, as well as memory cards, battery compartment, lens release, doors, locks, and hot shoe. In addition, A detachable lock protection system to secure and hold in place your 4K FULL HDMI cable is included with the cage. Also included is a top plate with a left-hand threaded ARRI hole patterns that fits on top of Sony’s factory handle. The cage can be fitted with a quick release tripod plate or DELTA adapter.Quick handle rod bloc (HAND5)The SHAPE Quick handle rod bloc is a professional video stabilization accessory with 2 camera handle grips, each providing an individual rotation angle of 360°. You can attach the handle to the camera platform using a simple screw knob. A simple Push-Button located at the articulation allows easy attachment and removal. Combined with the anodized aluminum rod bloc, the quick handle offers composite camera support for all 15 mm rods. You can achieve precise positioning by sliding the Quick Handle along the rods and tightening the small red knob located on the Rod Bloc. The rod bloc is designed with 2 screw-threaded holes allowing the mounting of the Quick Handle. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock.Composite mini shoulder pad (SHPAD3)The SHAPE mini composite shoulder pad is padded for superior comfort and is made of slip-free material. It is designed with a 15 mm rod block on top allowing to hold 15 mm rods for camera and accessories to be attached. The screw knob allows to attach SHAPE counter-weight (PAD1, PADCW1). By adding extra male-female rods at the back, you can also attach a counter-weight behind the same rods. This way, your body can easily supports the weight of the camera and its accessories. The shoulder pad is also the perfect solution for switching rapidly from shoulder to tripod without having to remove the shoulder pad. It can remain on the camera rig permanently.Back pad (PAD1)The SHAPE Back pad (PAD1) features a powder coated anodized aluminum plate and arm which are attached to a thick padding on the side facing the user. It is compatible with the SHAPE Mini Composite Shoulder Pad (SHPAD3, SHPAD2, SHPAD1) and can be attach or remove easily from your rig via a 1/4-20 camera screw knob. Additionally, the back pad’s position can be adjusted to the user’s preference – up to 2″ vertically and 360° horizontally. The bottom of the back pad is designed with (2) 1/4-20 threaded holes, allowing to attach other accessories or counterweights.15 mm 18 in rods (15TUBE18)One pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig.15-mm diameter18-in lengthHollow, non-threadedTapered ends for easy connection to a rod blockAluminium coated with a clear finish

Shape Sony FX6 15 mm base SKU: B15FX6 The Shape Sony FX6 15 mm base is the lightweight baseplate with a 15 mm rod system is designed to match the Sony FX6 optical center. It features two attachment points (1/4-20 and 3/8-16) for securely mounting the Sony FX6 body. The baseplate also comes with a pair of 15 mm rods that are 12” long through the length of the baseplate. The bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. Features Attaches underneath the camera with 3/8″-16 and 1/4″-20 screws Comes with an adapter plate Comes with (1 pair) 15 mm 12″ rods Mounting holes for securing the camera or a tripod plate Ratchet key knobs to secure rods removable rod bloc system at each end of the riser Rubber pads at the top of the base to protect your SONY FX6 Made of CNC aluminum In the box 1 x Sony FX6 15 mm base1 x 15 mm 12″ rods (1 pair)

Shape Sony FX6 camera cage SKU: FX6CAGE Add accessories and handheld functionality to your Sony FX6 camera with this kit made of CNC aluminum. It includes a form-fitting side plate with an Arri rosette, a top plate and the adaptor plate connecting together with the side post to protect your camera. The Shape Sony FX6 camera cage kit features several 1/4-20 and 3/8-16 threaded holes with anti-rotating holes. The top plate is also designed to fit the factory Sony FX6. The bottom of the plate features several 1/4″-20 and 3/8″-16 holes for mounting and balancing your camera on equipment like a tripod. Features Form fitting top, side and bottom plates Arri rosette mount on the side plate Several anti rotating threaded holes (3/8-16, 1/4-20) Top plate compatible with the factory Sony FX6 handle Made of CNC lightweight aluminum

Shape Sony FX6 controller top handle SKU: CTRLF6 Add a variety of accessories to your Sony FX6 camera rig with SHAPE top handle controller designed with a universal attachment system. The modular handle features 2 sections that can be removed or re-added to create different lengths and configurations. One of the sections is angled to create a handgrip on the end. The first section is equipped with a SHAPE Push-Button System, which allows you to raise or lower the top handle in a single push. The handle is machined from anodized aluminum, and each section is lined with a smooth, wooden finger grip made from Canadian maple. Numerous 3/8″-16 ARRI-style anti-twist accessory threads line the handle, so you can add a wide variety of accessories. Features Modular top handle with SHAPE Patented Push-Button technology Perfect to attach more camera accessories Lets you place the handgrip in the up, side and down positions Top handle also features several 3/8-16 anti rotating threaded holes The handgrip is made of Canadian maple to maximize ergonomy, comfort and security Connects to the native Sony FX6 top handle Tilts up and down for high adjustment and easy access to the battery

Shape Sony FX6 Push-Button view finder mount SKU: FX6VF The Push-Button Viewfinder Mount for the Sony FX6 is designed with two 15 mm Push-Button for horizontal, vertical, and transversal adjustments. By simply pressing the SHAPE patented push-button, you are allowed a 360-degree rotation to place your viewfinder in the best position for your use. Push, adjust, release, and then it’s locked. Also, the rod clamp with a ratchet knob allows you to slide the bracket for a perfect viewfinder distance adjustment. Features Sony FX6 viewfinder mount with 15 mm lightweight system rod bloc Designed with 15 mm SHAPE Patented Push-Button technology 2 Points of Articulation for horizontal and vertical adjustments Designed with monitor mount adapter for the Sony FX6 LCD screen monitor Can be mounted on one side only with the SHAPE rod clamp 15 mm (15CTH) Can be combined with either the FX6TP or the factory Sony top handle. (Both adapters supplied) Perfect for drone and gimbal applications Made of CNC aluminum

SHAPE Remote Extension Handle with Cable for Sony FX6SKU: FX6RHThe Remote Extension Handle for the Sony FX6 Camera from SHAPE is a variable-length adjustable handle designed to reposition the FX6 remote grip away from the camera while retaining full remote functionality. Compact for both storage and travel, the arm measures just 5.6″ when folded and may be increased to a maximum length of 11″ for use.A length adjustment range of 2″ is also provided to the user for a more customized and comfortable fit. The handle easily mounts to the Sony FX6 camera using an ARRI-style rosette connection and knob screw on one side, and a native Sony grip connection on the other. An included male-to-female LANC extension cable connects the remote grip to the camera’s body, maintaining full functionality after relocation.The coiled male-to-female cable features a LANC 3.5 mm male connector on one end and female on the other. It measures 10″ from end-to-end when coiled, and approximately 20″ when extended. The arm itself features SHAPE’s patented push-button release which allows the joint to be rotated a full 360° to any required angle. SHAPE is well known for its patented push-button system, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustments. By simply pressing the button, you are allowed a 360-degree rotation to place the remote extension handle in the best position for your use. Push, adjust, release, and then it’s locked!

Shape SONY FX6 Side handle adaptor to ARRI Rosette SKU: FX6HAR The side handle adaptor for Sony FX6 Camera from SHAPE is designed to reposition the FX6 remote grip away from the camera while retaining full remote functionality. Compatible with ARRI standard rosette, this adapter allows you to move the SONY hand grip either on the side of the SHAPE SONY FX6 camera cage (FX6CAGE) or any other accessory that includes a standard ARRI rosette. Compact for both storage and travel, the FX6 side handle adaptor provides a more customized and comfortable fit. The handle angle adjustment let you maintain full functionality after relocation. The handle adaptor easily mounts using an ARRI style rosette connection on one side, and a native Sony grip connection on the other.

Shape Sony FX6 top plate SKU: FX6TP Lightweight and robust CNC machined aluminum top plate designed to fit around the native Sony FX6 top handle. The top plate offers an array of 1/4-20 and 3/8-16 threads with Arri standard anti-rotating holes, which can be used to attach options around the camera. The Sony FX6 top plate is also designed with a threaded hole to insert your FX6 sensor pin and your FX6 viewfinder cable clamp. You can also upgrade your top plate with a 15CTH 15 mm lw rod clamp or FX6VF push-button viewfinder mount. Features Fits around the Sony FX6 top handle Lightweight and made of CNC aluminum Multiple 1/4-20 & 3/8-16 threaded holes with anti-rotating holes Designed with a threaded hole to insert your FX6 viewfinder cable clamp Designed to receive the SHAPE FX6VF assembly

Shape Sony FX9 cage handle EVF mount SKU: FX9EVFC Add accessories and handheld functionality to your Sony PXW-FX9 camera with this rig kit from SHAPE. It includes a baseplate with 15mm rod system, a form fitting side plate with Arri rosette , a top plate, a rear insert plate, a top handle with several threaded holes, and a viewfinder rod clamp with 19mm push-button. The baseplate match the Sony FX9 optical center and can also be tripod-mounted. The rear insert plate attaches to the rear of the camera to support it on the baseplate. The 15mm 12” rods allow you to mount additional accessories. Sony FX9 camera cage (FX9CAGE) Sony FX9 camera cageAdd accessories and handheld functionality to your Sony PXW-FX9 camera with this kit made of CNC aluminum. It includes a form fitting side plate with Arri rosette , a top plate and a rear insert plate connecting together to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti rotating holes. The top plate is also designed to fit the native Sony FX9 handle. Sony FX9 15mm lightweight baseplate (B15FX9) Sony FX9 15mm lightweight baseplateThe lightweight baseplate with 15 mm rod system is designed to match the Sony FX9 optical center. It features two attachment points (1/4-20 and 3/8-16) for securely mounting the Sony FX9 body. The baseplate also comes with a pair of 15 mm rods that are 12” long through the length of the baseplate. The bottom of the plate feature several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. Sony FX9 rear insert plate (FX9RIP) Sony FX9 rear insert plateThe rear insert plate is a CNC aluminum support plate compatible with the Sony FX9 camera. The plate mounts to the camera body via three M4 mounting screws. The center of the plate is designed with (3) 3/8-16 and (3) 1/4-20 threaded holes for tripod mount. The large surface of the plate also provides necessary support when the camera is mount to a tripod or a shoulder mount. Sony FX9 push-button view finder mount (FX9VF) Sony FX9 push-button view finder mountThe Push-Button Viewfinder Mount is designed with a 15mm rod with push-button and a L-bracket viewfinder clamp with ratchet knob. The 15mm rod is compatible with the Sony FX9 camera handle or any 15mm mounting hole. It features two points of articulation for horizontal, vertical, and transversal adjustment of your viewfinder. By simply pressing the SHAPE patented push-button, you are allowed a 360-degree rotation to place your view finder in the best position for your use. Push, adjust, release, and then its lock. 15 mm 12" rods (15TUBE12) 01 Shape 15tube12 Product PictureOne pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig. 15-mm diameter12-in length Hollow, non-threadedTapered ends for easy connection to a rod blockAluminum coated with a clear finish

SHAPE Sony FX9 Cage Top Handle SKU: FX9THC Add accessories and handheld functionality to your Sony PXW-FX9 camera with this kit made of CNC aluminum. It includes a form fitting side plate with Arri rosette, a top plate and a rear insert plate connecting together to protect your camera. The kit features several 1/4-20 and 3/8-16 threaded holes with anti-rotating holes. The top plate is also designed to fit the native Sony FX9 handle. Sony FX9 Top plate Lightweight and robust CNC machined aluminum top plate designed to fit around the native Sony FX9 top handle. The top plate offers an array of (12) 1/4-20 and (12) 3/8-16 threads with Arri standard anti-rotating holes, which can be used to attach options around the camera. The Sony FX9 top plate is also designed with a threaded hole to insert your FX9 sensor pin and your FX9 viewfinder cable clamp. Sony FX9 rear insert Plate The rear insert plate is a CNC aluminum support plate compatible with the Sony FX9 camera. The plate mounts to the camera body via three M4 mounting screws. The center of the plate is designed with (3) 3/8-16 and (3) 1/4-20 threaded holes for tripod mount. The large surface of the plate also provides necessary support when the camera is mount to a tripod or a shoulder mount. Compatible with the Sony FX9Formfitting cage with Arri rosette and mounting optionsTop handle with multiple mounting optionsMade of CNC aluminum

Shape Sony FX9 remote extension kit SKU: FX9RH The Sony FX9 remote extension handle from SHAPE offers an adjustable arm extension (2 inches) for the side hand grip provided with the Sony FX9. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm. It is designed with Arri rosettes to mount on the camera or baseplate with standard ARRI rosettes. It also features SHAPE’s patented Push-Button technology for easy angle adjustment and 360-degree rotation. SHAPE is well known for its patented Push-button system, now used by so many professionals in the industry. The technology was developped to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the remote extension handle in the best position for your use. Push, adjust, release, and then its lock. Key Features Compatible with Sony FX9 Easy to install and adjust Designed with Arri rosettes to mount on the camera or baseplatePush-Button system with 360-degree rotation for several positioning optionsPush, adjust, release, and then its lock Made of CNC machined aluminum

SHAPE Sony FX9 Top Plate SKU: FX9TP SHAPE Sony FX9 Top Plate is lightweight and robust CNC machined aluminum top plate designed to fit around the native Sony FX9 top handle. The top plate offers an array of (12) 1/4-20 and (12) 3/8-16 threads with Arri standard anti rotating holes, which can be used to attach options around the camera. The Sony FX9 top plate is also designed with a threaded hole to insert your FX9 sensor pin and your FX9 viewfinder cable clamp. Features Fits Around the Sony FX9 top handle Thin, lightweight, made of CNC aluminum Multiple 1/4-20 & 3/8-16 threaded holes with anti-rotating holes Designed with a threaded hole to insert your FX9 sensor pin Designed with a threaded hole to insert your FX9 viewfinder cable clamp

Shape T-SHAPE pro top handle SKU: TPST Add numerous accessories to your rig with the T-Shape Pro Top Handle with ARRI-Style Accessory Threads from SHAPE. The T-shaped handle features a solid connection to your cage or rig using mounting screws. The handle is constructed from anodized aluminum and it is lined with a smooth, wooden finger grip made from Canadian maple. It features numerous 3/8"-16 ARRI-style anti-twist accessory threads so you can add a wide variety of accessories. The front and rear of the handle also feature ARRI-style accessory threads to add separately available SHAPE accessories such as 15mm rod mounts or 3/8"-16 threaded adapters. Features Modular Top handle with multiple threaded holes Perfect to attach more camera accessories The handgrip is made of Canadian maple to maximize ergonomy, comfort and security. The parts are anodized to protect against wear and oxidation Made of CNC aluminum

SHAPE Telescopic Black Handle Arri Rosette Cuffs Kit SKU: CUFKIT Not only can you switch between 15 to 19 mm LWS or Studio – you won’t need to remove your accessories to do it. Connect the Arri Rosette Handles to the rod block, clip the rod block onto your rig, and you’re good to go. Case included. Use the screwdriver included in the Cuff Kit to shorten the Telescopic Handles to 3”. When you’re short on space, it makes all the difference. Since our Handles offer 360 degrees of adjustment, you can clip the cuff kit above or below the rods – make it comfortable! 15 mm LWS cuff rod block Arri rosette (CUF15) 15 mm LWS cuff rod block Arri rosetteThe SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm lightweight rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. 15 mm studio spacing cuff rod block Arri rosette (CUFST) 15 mm studio spacing cuff rod block Arri rosetteThe SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm sudio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. 19 mm studio cuff rod block Arri rosette (CUF19) 19 mm studio cuff rod block Arri rosetteThe SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 19 mm sudio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. Telescopic SHAPE black handle Arri rosette (HAND12SHADOW) Telescopic SHAPE black handle Arri rosetteLeft and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.

SHAPE Telescopic Handles ARRI RosetteLeft and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry.The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. Key FeaturesLeft and right telescopic handgrips each featuring 4 points of articulation and ARRI rosettesExtends up to 2 inches and rotates throughout 360°Markings on extendable arm to help you remember your preferred settingsPatented Push-button system for fast adjustmentPush, adjust, release and its lockLet you move quickly between known setupsRubber handgrips for stability and precisionMade of CNC machined aluminum for resistance

SHAPE Telescopic Handles ARRI RosetteLeft and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry.The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. Key FeaturesLeft and right telescopic handgrips each featuring 4 points of articulation and ARRI rosettesExtends up to 2 inches and rotates throughout 360°Markings on extendable arm to help you remember your preferred settingsPatented Push-button system for fast adjustmentPush, adjust, release and its lockLet you move quickly between known setupsRubber handgrips for stability and precisionMade of CNC machined aluminum for resistance

SHAPE Telescopic Single Handle ARRI Rosette Left SideSKU: HAND3Left telescopic handgrip with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. The arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. Key FeaturesLeft telescopic handgrips with ARRI rosettesLet you move quickly between known setupsArm features 4 points of articulationArm extend up to 2 inches and rotates throughout 360°Markings on extendable arm help you remember preferred settingsPatented Push-button system for fast adjustmentPush, adjust, release, and then its lockRubber handgrips for stability and precisionMade of CNC machined aluminum for resistance

SHAPE Top Plate for Sony Burano SKU: BURTP This top plate system is meticulously crafted to fit the Sony Burano camera model. It provides a secure and versatile platform for attaching accessories and enhancing your shooting experience. The top plate can be installed directly onto the camera without any additional components. It offers convenience and flexibility for various shooting scenarios. The top plate includes a front rod bloc for attaching rods to install accessories such as wireless lens control systems. Specifically designed Top plate system for Sony BuranoStandalone installation on the cameraTop plate includes front rod blocIncludes a cable connector protector for the viewfinderTop plate compatible with Sony Burano & FX9 factory top handlesTop plate compatible with LPHT – TPST – CTRLTwo-piece design plate which can be removed for FX9 factory top handleMultiple points of attachment on top plate. (3/8-16 & 1/4-20 anti-twist threads)Made of CNC aluminum

SHAPE touch and go flying plate system SKU: TGCFP SHAPE touch and go flying plate system is compatible with Sachtler 35, OConnor Euro (Large 120mm) and Ronford Baker RBQ Touch & Go System designed with a Flying Plate and a Quick Release Receiver Plate Universally accepted in the larger cine market and respect the industry standard CNC Machined Aluminum and Lightweight (only 0.36 kg for the receiver plate vs 1.13 kg for the comparative Ronford Baker piece) SHAPE touch and go quick release receiver base (TGRB) Very easy to use. Simply drop the flying plate (FPLGO) into the Quick Release Receiver Plate and the plate will snap. Push the lever further to clamp the flying plate into locked mode. SHAPE touch and go flying plate (FPLGO) Very easy to use. Simply drop the flying plate into the Quick Release Receiver Plate (TGRB) and the plate will snap. Push the lever further to clamp the flying plate into locked mode. In the box 1 x Touch and go quick release receiver base (TGRB)1 x Touch and go flying plate (FPLGO)

SHAPE UNIVERSAL LENS SUPPORT PRO SKU: LENSPRO Support heavy telephoto lenses or zoom lenses with the SHAPE Universal Lens Support Pro. This lens support secures to 15 mm LWS rods, distributing the lens weight over the rods, removing stress from your camera’s lens mount. A spring-loaded lever tightens the rod clamp. 1/4″-20 and 3/8″-16 threaded studs fit inside the height-adjustable support shaft to interface with most standard lens support feet. The support shaft is tightened with a thumbscrew. If your lens doesn’t have a support foot, the Universal Lens Support Pro includes a rubber-padded Y adapter that will add support to your lens. Hosts all standard 15 mm rodsRolling Rubber wheels Y-bracket AdapterReversible threaded mounting stud adapter 1/4-20 and 3/8-16Vertical height travel distance adjustment of 3.81 cmQuickly mount and dismount the support from your rigRobust material and secure extra gripCNC machined partsStainless steel screws In the box 1 x 15MM ROD BLOC WITH 15MM TOP CLAMP (R15TC)1 x REVERSIBLE THREADED MOUNTING STUD ADAPTER (1/4-20 AND 3/8-16)1 x RUBBER PADDED Y-LENS ADAPTER1 x 1/4-20SCREW1 x 3/8-16 SCREW

SHAPE VCT Tripod Plate SKU: VCTSH The SHAPE VCT Tripod Plate is a quick-release tripod plate based on a V-lock system with delta attachment at the front and a rear pin at the back. Compatible with a wide variety of baseplates, it facilitates quick-release mounting/unmounting of professional broadcast cameras. The delta plate system at the front of this plate and the rear catch hook will allow you to quickly mount and dismount your camcorder from a tripod adapter. Features Made of CNC aluminum Quickly mount and dismount your camcorder from a tripod Quick-release latch to unlock the baseplate from the VCT plate 1/4″-20, 3/8″-16 threaded holes underneath to attach tripod quick-release plates

SLR Magic Bar Adapter Lens Support SKU: SLR-LSA15 SLR Magic Bar Adapter Lens Support attaches to 15mm Rod Support. For use with large lenses. Height adjustable to fit any lens