Teradek Bolt 6 XT 750 TX/RX Deluxe Set Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment. The included Transmitter and Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models). Teradek Bolt 6 XT offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. Product Highlights Zero Delay 6GHz Wireless Frequency Bolt 4K Cross-Compatibility Lightweight and Quiet Built in 5-pin USB for camera control Inputs: 12G-SDI, HDMI 2.0 Outputs: 12G-SDI, HDMI 2.0 In the box1 x Bolt 6 XT 750 TX V-Mount / GOLD Mount1 x Bolt 6 XT 750 RX V-Mount / GOLD Mount1 x Lightstand Adapter 1/4-20in1 x Hot Shoe Adaptor1 x Hex L key 2.5mm size 3-5/8"" length2 x 2pin Conn. to PowerTap - 18in/46cm Cable1 x 2pin Conn. to 2pin Conn. (Alexa) 18in/46cm Cable2 x SDI 12G BNC to BNC 18in/46cm Cable1 x Teradek Case Large - Bolt XT TX/2RX1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable9 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x Wooden Camera - Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 5"")1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable1 x Bolt 6 XT TX Color Band (Red Rubber)1 x Bolt 6 XT TX Color Band (Yellow Rubber)1 x Bolt 6 XT TX Color Band (Green Rubber)1 x Bolt 6 XT TX Color Band (Blue Rubber)1 x Bolt 6 XT RX Color Band (Red Rubber)1 x Bolt 6 XT RX Color Band (Yellow Rubber)1 x Bolt 6 XT RX Color Band (Green Rubber)1 x Bolt 6 XT RX Color Band (Blue Rubber)

Teradek Bolt 6 XT 750 TX/RX Deluxe Set Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment. The included Transmitter and Receiver are cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models). Teradek Bolt 6 XT offers three line-of-sight options: 750 ft., 1500 ft., and the MAX Set, which can be configured for up to 5,000+ ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. Product Highlights Zero Delay 6GHz Wireless Frequency Bolt 4K Cross-Compatibility Lightweight and Quiet Built in 5-pin USB for camera control Inputs: 12G-SDI, HDMI 2.0 Outputs: 12G-SDI, HDMI 2.0 In the box1 x Bolt 6 XT 750 TX V-Mount / GOLD Mount1 x Bolt 6 XT 750 RX V-Mount / GOLD Mount1 x Lightstand Adapter 1/4-20in1 x Hot Shoe Adaptor1 x Hex L key 2.5mm size 3-5/8"" length2 x 2pin Conn. to PowerTap - 18in/46cm Cable1 x 2pin Conn. to 2pin Conn. (Alexa) 18in/46cm Cable2 x SDI 12G BNC to BNC 18in/46cm Cable1 x Teradek Case Large - Bolt XT TX/2RX1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable9 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x Wooden Camera - Universal Ultra Arm Monitor Mount (Combo 1/4-20 & 3/8-16, 5"")1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable1 x Bolt 6 XT TX Color Band (Red Rubber)1 x Bolt 6 XT TX Color Band (Yellow Rubber)1 x Bolt 6 XT TX Color Band (Green Rubber)1 x Bolt 6 XT TX Color Band (Blue Rubber)1 x Bolt 6 XT RX Color Band (Red Rubber)1 x Bolt 6 XT RX Color Band (Yellow Rubber)1 x Bolt 6 XT RX Color Band (Green Rubber)1 x Bolt 6 XT RX Color Band (Blue Rubber)

Teradek Bolt 6 XT 750 RX The Bolt 6 XT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This receiver allows you to receive color accurate, True HDR videos in under 0.001 seconds. Key features of the Teradek Bolt 6 XT Receiver include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 XT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 XT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment. The Receiver is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).

Teradek Bolt 6 XT 750 RX The Bolt 6 XT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This receiver allows you to receive color accurate, True HDR videos in under 0.001 seconds. Key features of the Teradek Bolt 6 XT Receiver include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 XT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 XT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment. The Receiver is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).

Teradek Bolt 6 XT 750 RX The Bolt 6 XT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This receiver allows you to receive color accurate, True HDR videos in under 0.001 seconds. Key features of the Teradek Bolt 6 XT Receiver include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 XT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 XT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. Bolt 6 XT has been redesigned to seamlessly fit into your setup, with a smaller, lighter-weight build that runs cooler and 50% quieter than the Bolt 4K. An integrated 5-pin USB port allows for effortless and wireless camera-control setup when using SmallHD Smart Monitors, and an improved long range wireless video mode. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment. The Receiver is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).

Teradek Bolt 6 XT MAX Set with 10K RXBolt 6 XT is a wireless video transmission system that supports up to 4K60 10-bit 422 HDR video over 12G-SDI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. This kit includes a Bolt 6 XT TX and a Bolt 6 XT 10K RX.Bolt 6 XT 10K RX is a zero-delay video receiver, offering a remarkable wireless range of up to 10,000 feet (3 kilometers). Its enhanced directional antenna is specifically designed for superior RF performance, minimizing interference by focusing signal reception and benefiting from robust internal shielding. Its all-in-one enclosure design not only boosts range and reliability in challenging RF environments, but it also eliminates the hassle of external antenna cables. This results in a much cleaner setup, expediting deployment from its case onto a c-stand.Control your setup with ease using the Bolt App, which simplifies device pairing, allows fine-tuned frequency adjustments, and includes a built-in spectrum analyzer for advanced RF diagnostics.This kit is compatible with additional Bolt 6 and Bolt 4K receivers.The Gold Mount version of the Teradek Bolt 6 XT 10K RX is compatible with 14V and 26V batteries.FeaturesComplete Bolt Set with Bolt 6 XT TX and 10K RXUp to 10,000ft (3 km) range with Zero-DelayUp to 4K30 10-bit 422 HDR Video5GHz and 6GHz Auto or Manual Frequency Selection6GHz is available in the US, EU, Canada, Japan, and Australia/New Zealand

Teradek Bolt 6 XT MAX Set with 10K RXBolt 6 XT is a wireless video transmission system that supports up to 4K60 10-bit 422 HDR video over 12G-SDI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. This kit includes a Bolt 6 XT TX and a Bolt 6 XT 10K RX.Bolt 6 XT 10K RX is a zero-delay video receiver, offering a remarkable wireless range of up to 10,000 feet (3 kilometers). Its enhanced directional antenna is specifically designed for superior RF performance, minimizing interference by focusing signal reception and benefiting from robust internal shielding. Its all-in-one enclosure design not only boosts range and reliability in challenging RF environments, but it also eliminates the hassle of external antenna cables. This results in a much cleaner setup, expediting deployment from its case onto a c-stand.Control your setup with ease using the Bolt App, which simplifies device pairing, allows fine-tuned frequency adjustments, and includes a built-in spectrum analyzer for advanced RF diagnostics.This kit is compatible with additional Bolt 6 and Bolt 4K receivers.The Gold Mount version of the Teradek Bolt 6 XT 10K RX is compatible with 14V and 26V batteries.FeaturesComplete Bolt Set with Bolt 6 XT TX and 10K RXUp to 10,000ft (3 km) range with Zero-DelayUp to 4K30 10-bit 422 HDR Video5GHz and 6GHz Auto or Manual Frequency Selection6GHz is available in the US, EU, Canada, Japan, and Australia/New Zealand

Teradek Link AX Link AX is Teradek’s new production-ready Wi-Fi router that features Wi-Fi 6 and five configurable ethernet ports to give filmmakers the most flexibility possible. Unlike typical off-the-shelf routers, Link AX is designed with a ruggedized metal chassis and Gold/V-Mount battery mounting options to withstand the demands of any production, without adding yet another power drain to your DIT cart or video village. Link AX facilitates numerous workflows that connect productions from set, to remote collaborators, to post. Teradek Link AX expands your production networking capabilities with a ruggedized, set-ready aluminum chassis wrapped around a Wi-Fi 6 (802.11AX) router. Use Link AX for multiple workflow scenarios: more cameras and devices on your local production streaming network, camera-to-cloud for multiple cameras; simultaneous camera-control over multiple cameras. Product Highlights Expand your production networking capabilitiesWi-Fi monitoring with multiple Serv devices20 independent viewers using VUER HDR app Built for Production Wi-Fi monitoring with multiple Serv devices 20 independent viewers using VUER HDR app on mobile devicesAdd an internet connection to enable remote monitoring or camera-to-cloud workflowsSimultaneous control of multiple cameras over Wi-Fi Rugged Design Robust Aluminum ChassisGold-Mount and V-Mount Battery Plate Options 3/8” and 3/4”-20 Mounting Points 5 customizable ethernet portsUSB-A for cellular modems like Node II with Teradek Data In the box 1 x Link AX Wireless Access Point Router 5 Port (no mount / V-Mount / GOLD-Mount)1 x Lightstand Adapter 3/8in1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable

Teradek Link AX Link AX is Teradek’s new production-ready Wi-Fi router that features Wi-Fi 6 and five configurable ethernet ports to give filmmakers the most flexibility possible. Unlike typical off-the-shelf routers, Link AX is designed with a ruggedized metal chassis and Gold/V-Mount battery mounting options to withstand the demands of any production, without adding yet another power drain to your DIT cart or video village. Link AX facilitates numerous workflows that connect productions from set, to remote collaborators, to post. Teradek Link AX expands your production networking capabilities with a ruggedized, set-ready aluminum chassis wrapped around a Wi-Fi 6 (802.11AX) router. Use Link AX for multiple workflow scenarios: more cameras and devices on your local production streaming network, camera-to-cloud for multiple cameras; simultaneous camera-control over multiple cameras. Product Highlights Expand your production networking capabilitiesWi-Fi monitoring with multiple Serv devices20 independent viewers using VUER HDR app Built for Production Wi-Fi monitoring with multiple Serv devices 20 independent viewers using VUER HDR app on mobile devicesAdd an internet connection to enable remote monitoring or camera-to-cloud workflowsSimultaneous control of multiple cameras over Wi-Fi Rugged Design Robust Aluminum ChassisGold-Mount and V-Mount Battery Plate Options 3/8” and 3/4”-20 Mounting Points 5 customizable ethernet portsUSB-A for cellular modems like Node II with Teradek Data In the box 1 x Link AX Wireless Access Point Router 5 Port (no mount / V-Mount / GOLD-Mount)1 x Lightstand Adapter 3/8in1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable

Teradek Link AX Link AX is Teradek’s new production-ready Wi-Fi router that features Wi-Fi 6 and five configurable ethernet ports to give filmmakers the most flexibility possible. Unlike typical off-the-shelf routers, Link AX is designed with a ruggedized metal chassis and Gold/V-Mount battery mounting options to withstand the demands of any production, without adding yet another power drain to your DIT cart or video village. Link AX facilitates numerous workflows that connect productions from set, to remote collaborators, to post. Teradek Link AX expands your production networking capabilities with a ruggedized, set-ready aluminum chassis wrapped around a Wi-Fi 6 (802.11AX) router. Use Link AX for multiple workflow scenarios: more cameras and devices on your local production streaming network, camera-to-cloud for multiple cameras; simultaneous camera-control over multiple cameras. Product Highlights Expand your production networking capabilitiesWi-Fi monitoring with multiple Serv devices20 independent viewers using VUER HDR app Built for Production Wi-Fi monitoring with multiple Serv devices 20 independent viewers using VUER HDR app on mobile devicesAdd an internet connection to enable remote monitoring or camera-to-cloud workflowsSimultaneous control of multiple cameras over Wi-Fi Rugged Design Robust Aluminum ChassisGold-Mount and V-Mount Battery Plate Options 3/8” and 3/4”-20 Mounting Points 5 customizable ethernet portsUSB-A for cellular modems like Node II with Teradek Data In the box 1 x Link AX Wireless Access Point Router 5 Port (no mount / V-Mount / GOLD-Mount)1 x Lightstand Adapter 3/8in1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable

Teradek Pro Battery Plates (Bolt 6 / Bolt 4K / Serv 4K) This Single Battery Plate from Teradek allows you to power your Bolt 6 / Bolt 4K Transmitter or Receiver, Bolt 6 LT / Bolt 4K LT Receiver, or Serv 4K using either Gold Mount or V-Mount battery plate. This plate offers one D-tap accessory output (50W - 14.4 Volt max).

Teradek Pro Battery Plates (Bolt 6 / Bolt 4K / Serv 4K) This Single Battery Plate from Teradek allows you to power your Bolt 6 / Bolt 4K Transmitter or Receiver, Bolt 6 LT / Bolt 4K LT Receiver, or Serv 4K using either Gold Mount or V-Mount battery plate. This plate offers one D-tap accessory output (50W - 14.4 Volt max).

Teradek Pro Battery Plates (Bolt 6 / Bolt 4K / Serv 4K) This Single Battery Plate from Teradek allows you to power your Bolt 6 / Bolt 4K Transmitter or Receiver, Bolt 6 LT / Bolt 4K LT Receiver, or Serv 4K using either Gold Mount or V-Mount battery plate. This plate offers one D-tap accessory output (50W - 14.4 Volt max).

Teradek Pro Battery Plates (Bolt 6 / Bolt 4K / Serv 4K) This Single Battery Plate from Teradek allows you to power your Bolt 6 / Bolt 4K Transmitter or Receiver, Bolt 6 LT / Bolt 4K LT Receiver, or Serv 4K using either Gold Mount or V-Mount battery plate. This plate offers one D-tap accessory output (50W - 14.4 Volt max).

TERADEK RF-X Auto-Switcher for Bolt 4K/6 and Ranger RXsThe Teradek RF-X (Radio Frequency Matrix) is an intelligent auto-switching system that continuously monitors up to six redundant Bolt or Ranger receivers (run over hardline SDI connections) and automatically selects the strongest available video signal.The result is a single, uninterrupted 12G-SDI output, even in the most congested RF environments. Built for broadcast, live events, and cine production, RF-X delivers the best possible video quality across complex signal paths, operating with zero delay and requiring zero user intervention. From sports and concerts to cine productions, RF-X thrives in chaotic RF environments. As cameras, talent, and obstacles move, RF-X automatically locks onto the strongest signal to keep your feed clean and uninterrupted. No manual switching and minimal to zero dropped frames or video degradation. Just reliable wireless performance when every moment counts.The RF-X is ideal for these applicationsEvents and StadiumsSteadicam or other long tracking shotsCar scenesHospital, Military, or Airport LocationsEven simple set ups with known RF interference Because fiber is immune to RF noise, ground loops, and other electrical interference, it provides an additional, highly reliable signal path, further protecting your video feed from signal loss or degradation. This fiber connection can extend video to off-set DIT carts, Video Village, additional video switchers, or ancillary routing systems, even across long distances. Two or more RF-X units can be linked over single-mode fiber using the RF-X's SFP port.FeaturesCombines Multiple Bolt or Ranger SDI outputs into a single SDI output (RF-X is compatible with all models of Bolt 4K, Bolt 6, and Ranger Series. You must use all Bolts or all Rangers. You can’t mix and match.)Automatically chooses the best input signal based on the RF StrengthIncreases coverage area by "networking" receiversRemoves the operator and equipment needed to switch multiple receiversMultiple RF-X units can be connected together via single-mode fiber using the SFP portConnectivity12G-SDI (6x Inputs, 2x Outputs)SFP (SDI Fiber) - connect 2 RF-X over fiber for extended range (SFP Module and Fiber Cable sold separately. Distances are based on SFP Module and can vary.)Ethernet for Web UI access and FirmwareUSB-C for Web UI access and Firmware

Teradek Wireless Camera Control Starter Kit for Bolt Owners of SmallHD Smart 7 monitors and Teradek Bolt 4K Transmitters and Receivers can now unlock Wireless Camera Control. Wireless Camera Control Starter Kit works with your products to create a cable-free setup, allowing you to control a variety of cameras at up to 5,000 feet. Compatible Cameras ARRI Alexa Mini, ALEXA Mini LF, AMIRA, RED KOMODO, V-RAPTOR, DSMC2, and Sony VENICE (coming soon) In the box 2x Wireless Camera Control Hubs for your Smart 7 Monitor1x Wireless Camera Control Adaptors for Transmitter1x Wireless Camera Control Adaptors for Receiver2x 5pin to 5pin cables A camera control license from SmallHD is required to use the Camera Control Starter Kit.

Teradek Wireless Camera Control Starter Kit for Bolt Owners of SmallHD Smart 7 monitors and Teradek Bolt 4K Transmitters and Receivers can now unlock Wireless Camera Control. Wireless Camera Control Starter Kit works with your products to create a cable-free setup, allowing you to control a variety of cameras at up to 5,000 feet. Compatible Cameras ARRI Alexa Mini, ALEXA Mini LF, AMIRA, RED KOMODO, V-RAPTOR, DSMC2, and Sony VENICE (coming soon) In the box 2x Wireless Camera Control Hubs for your Smart 7 Monitor1x Wireless Camera Control Adaptors for Transmitter1x Wireless Camera Control Adaptors for Receiver2x 5pin to 5pin cables A camera control license from SmallHD is required to use the Camera Control Starter Kit.