Accsoon CineView 2 SDIThe Accsoon CineView 2 SDI is a next-generation 1080P wireless video transmission system featuring a massive 1500ft/450m range (line-of-sight). It offers even greater stability than its predecessors and an impressive latency of less than 50ms. The CineView 2 SDI uses the Accsoon Dual-Band transmission technology which takes the same video frame and sends it on both 2.4GHz and 5GHz frequencies at the same time for an inherently more stable wireless connectivity on set FeaturesHigh Reliability 2.4GHz+5GHz Dual-Band Transmission TechnologyExtreme Low Latency of Less Than 50msLong-Range Transmission Range Up to 1500ft/450mSDI & HDMI Input/Output, HDMI Loop-Out, UVC OutSDI to HDMI Pass-throughMonitoring on Up to 4 Devices, Mix and MatchSilent Fanless DesignPower with NP-F battery, DC or 5V 2A USB-C powerMonitoring Made Simple with Accsoon SEE AppAutomatic Channel Selection

Accsoon CineView Master 4K - Receiver onlyExperience high quality details with CineView Master 4K. From input to output, this fully end-to-end 4K60 solution offers stunning 4K resolution at a fluid 60 frames per second, perfect for monitoring, recording, live-streaming and any other video productions.With the powerful capabilities of the 8K A/V processor, the Accsoon CineView Master 4K can encode and transmit three different video streams at the same time to meet the diverse needs of different applications. Technical dataA/V Processor: 8K High Performance A/V ProcessorProtocol: Accsoon Proprietary RTMS 4.0 ProtocolVideo Output: HDMI, 3G SDIHDMI Loop-out Format: Identical to the HDMI video inputDC Port: 5.5mmx2.1mm, center positiveDC Voltage: 7.4~16.8VBattery: Compatible with NP-F550, NP-F750, NP-F970Audio: 48KHz 16/20/24bitLatency: 1080p < 25ms / 4K < 35ms (Camera latency not included)Transmission Range: ≥ 2.5 km (No obstacles, no interference)OperatingEnvironment Temperature: -10~40°CPower Consumption: 5.0W average Without powering other devicesDimensions: (Antennas Not Included) 130mm x 95mm x 32 mmWeight: (Antennas Not Included) 320gSDI Output Format1080p: 24/25/30/50/60p Level A1080i: 50/60i720p: 50/60pHDMI Output Format4K (3840*2160): 24/25/30/50/60p1080p: 24/25/30/50/60p1080i: 50/60i720p: 50/60p

Accsoon Cineview SEThe CineView SE is a wireless video transmitter and receiver, with new best in class latency at under 50ms. The CineView SE can transmit a video source via SDI & HDMI up to 1080p 60fps inputs/outputs. It transmits the signal on 2.4GHz+5GHz Dual- Band frequencies simultaneously for increased signal stability and sends video at an impressive maximum range of 1200ft line-of-sight. Transmitter dataVideo Input: SDI/HDMISDI Input Format: 1080p 23.98/24/25/29.97/30/50/59.94/60fpsLevel: A/B 1080p 23.98/24/25/29.97/30/50/59.94/60fpsHDMI Input Format: 1080p 23.98/24/25/29.97/30/50/59.94/60fpsDC Port: 5.5mm x 2.1mm center positiveDC Voltage: 7.4~16.8VAudio: 44.1KHz/48KHz 16bit/24bit PCMLatency: <0.05s (Camera latency not included)OLED Display: 1.3inchTransmission Power: 17~20dBmTransmission Range: 1200ft (No obstacles, no interference)Power Consumption: 4.5Watt (Typical)Operating Environment Temperature: -10°C~40°C℃Dimensions: 105mm x 66mm x 32mm (Antennas not included)Weight: 210g (Antennas not included) Receiver dataVideo Output: SDI/HDMISDI Output Format: 1080p 24/25/30/50/60fps Level AHDMI Output Format: 1080p 24/25/30/50/60fpsDC Port: 5.5mm x 2.1mm center positiveDC Voltage: 7.4~16.8VOLED Display: 1.3inchPower Consumption: 3.5Watt (Typical)Operating Environment Temperature: -10°C~40°C℃Dimensions: 105mm x 66mm x 32mm (Antennas not included)Weight: 210g (Antennas not included)

Hollyland Pyro S RXPyro S is a groundbreaking addition to the Hollyland Pyro series lineup, which redefines wireless video transmission. Pyro S supports HDMI and SDI input/output and can transmit to up to four receivers simultaneously, with a range of up to 1,300ft (400m) and minimal latency of just 50ms. Pyro S uses advanced Auto Dual-Band Hopping (ADH) technology to ensure reliable transmission and features selectable modes for your real-world shooting needs.Features1 TX to 4 RXUp to 1300ft(400m)0.05S low latency2.4 GHz & 5 GHzADH (Auto Dual-Band Hopping)HDMI & SDIUVC & RTMP streaming4K30 transmission What's in the Box1 x Pyro S Wireless Video Receiver3 x Paddle Antenna (2.4 GHz & 5 GHz)1 x USB-C OTG Adapte*1 User Manual1 x Warranty Card1 x Packing List Card1 x Hollyland Ecosystem Leaflet1 x 12V/2A DC Power Adapter Technical dataPortDC Input: 2.0mm Core SocketHDMI Output: HDMI 1.4bSDI Output: 3G SDIUSB-C: USB 2.0 OTGAntenna: SMA MalePower SupplyBattery Voltage Range: 6.8 – 8.4VDC Voltage Range: 6 – 16VPower Consumption < 8WNet Weight 207gDimensions L × W × H: 112 × 71.2 × 34.1mmInput/Output FormatHDMI Output720p50/59.94/601080i50/59.94/60080p23.98/24/25/29.97/301080p50/59.94/603840*2160 30/25/24/29.97/23.98SDI Output1080p50/59.94/601080i50/59.94/601080p23.98/24/25/29.97/30720p50/59.94/601080p23.98/241080i50/59.94/60Operating Frequency5 GHz Frequency Band5.150 – 5.250 GHz5.250 – 5.350 GHz5.470 – 5.725 GHz5.725 – 5.850 GHz2.4 GHz Frequency Band2.412 – 2.484 GHzReceiver Sensitivity -85 dBm (Broadcast: -80 dBm)Latency as low as 50msBandwidth20 MHz(Broadcast: 40 MHz)Temperature10 – 45℃ (working)-40 – 60℃ (storage)

TERADEK Ace 750 RXSKU: 10-2242Ace 750 RX is a lightweight, compact, HDMI wireless video receiver with built-in antennas that is designed to be used with mirrorless cameras, camcorders, action cameras and, A/V workflows. It receives uncompressed zero-delay, 4Kp30, HDR video and audio with up to 750 feet (230m) of range. Teradek Ace 750 is cross-compatible with Bolt 4K and Bolt 6 in 5GHz and 6GHz modes and is fully compliant with FCC and CE frequency usage and power output guidelines. Ace 750 RX features an integrated hole pattern for mounting and can be powered with NP-F or LP-E6 batteries using an optional L-shaped plate.The transmitter (TX) and receiver (RX) units automatically detect and select the 5Ghz or 6GHz RF channel with the least interference and employ Auto-Frequency Switching to maintain optimal signal quality. The TX can send video to up to six RX devices at the same time using the Bolt Manager app for iOS or Android.Product Highlights4Kp30 10-bit HDRTrue zero-delay - less than 0.01 seconds of latency6GHz auto frequency-switchingRange up to 750 feet / 230mMulti-receiver capable - up to 6 Receivers per Transmitter

Teradek Bolt 6 LT 750 Int Ant SKU: 10-2264SKU: 10-2264-VSKU: 10-2264-G The Bolt 6 LT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can receive color-accurate, True-HDR videos in under 0.001 seconds. Key features of the Teradek Bolt 6 LT RX include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. In the boxBolt 6 LT 750 RX no mount1 x Bolt 6 LT 750 RX Internal Antenna1 x 2pin to P-Tap Cable, 18in1 x 2pin to AC Adapter 18W, 6ft1 x SDI Cable, 10in1 x USB-C 2.0 Male to Male, 1mBolt 6 LT 750 RX V-mount / Gold-Mount1 x Bolt 6 LT 750 RX Internal Antenna V-Mount / GOLD-Mount1 x 2pin to P-Tap Cable, 18in1 x 2pin to AC Adapter 18W, 6ft1 x SDI Cable, 10in1 x USB-C 2.0 Male to Male, 1m

Teradek Bolt 6 LT 750 Int Ant SKU: 10-2264SKU: 10-2264-VSKU: 10-2264-G The Bolt 6 LT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can receive color-accurate, True-HDR videos in under 0.001 seconds. Key features of the Teradek Bolt 6 LT RX include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. In the boxBolt 6 LT 750 RX no mount1 x Bolt 6 LT 750 RX Internal Antenna1 x 2pin to P-Tap Cable, 18in1 x 2pin to AC Adapter 18W, 6ft1 x SDI Cable, 10in1 x USB-C 2.0 Male to Male, 1mBolt 6 LT 750 RX V-mount / Gold-Mount1 x Bolt 6 LT 750 RX Internal Antenna V-Mount / GOLD-Mount1 x 2pin to P-Tap Cable, 18in1 x 2pin to AC Adapter 18W, 6ft1 x SDI Cable, 10in1 x USB-C 2.0 Male to Male, 1m

Teradek Bolt 6 LT 750 Int Ant SKU: 10-2264SKU: 10-2264-VSKU: 10-2264-G The Bolt 6 LT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can receive color-accurate, True-HDR videos in under 0.001 seconds. Key features of the Teradek Bolt 6 LT RX include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. In the boxBolt 6 LT 750 RX no mount1 x Bolt 6 LT 750 RX Internal Antenna1 x 2pin to P-Tap Cable, 18in1 x 2pin to AC Adapter 18W, 6ft1 x SDI Cable, 10in1 x USB-C 2.0 Male to Male, 1mBolt 6 LT 750 RX V-mount / Gold-Mount1 x Bolt 6 LT 750 RX Internal Antenna V-Mount / GOLD-Mount1 x 2pin to P-Tap Cable, 18in1 x 2pin to AC Adapter 18W, 6ft1 x SDI Cable, 10in1 x USB-C 2.0 Male to Male, 1m

Teradek Bolt 6 LT 750 RX SKU: 10-2262SKU: 10-2262-VSKU: 10-2262-G The Bolt 6 LT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can receive color-accurate, True-HDR videos in under 0.001 seconds. Key features of the Teradek Bolt 6 LT RX include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. In the boxBolt 6 LT 750 RX no mount1 x Bolt 6 LT 750 RX1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft CableBolt 6 LT 750 RX V-mount / Gold-Mount1 x Bolt 6 LT 750 RX V-Mount / Gold Mount2 x Bolt 4K LT RX Battery Cover2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable

Teradek Bolt 6 LT 750 RX SKU: 10-2262SKU: 10-2262-VSKU: 10-2262-G The Bolt 6 LT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can receive color-accurate, True-HDR videos in under 0.001 seconds. Key features of the Teradek Bolt 6 LT RX include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. In the boxBolt 6 LT 750 RX no mount1 x Bolt 6 LT 750 RX1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft CableBolt 6 LT 750 RX V-mount / Gold-Mount1 x Bolt 6 LT 750 RX V-Mount / Gold Mount2 x Bolt 4K LT RX Battery Cover2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable

Teradek Bolt 6 LT 750 RX SKU: 10-2262SKU: 10-2262-VSKU: 10-2262-G The Bolt 6 LT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can receive color-accurate, True-HDR videos in under 0.001 seconds. Key features of the Teradek Bolt 6 LT RX include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. In the boxBolt 6 LT 750 RX no mount1 x Bolt 6 LT 750 RX1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft CableBolt 6 LT 750 RX V-mount / Gold-Mount1 x Bolt 6 LT 750 RX V-Mount / Gold Mount2 x Bolt 4K LT RX Battery Cover2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable

TERADEK Bolt 6 LT RX 1500 The Bolt 6 LT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can receive color-accurate, True-HDR videos in under 0.001 milliseconds. Key features of the TERADEK Bolt 6 LT RX include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. Bolt 6 LT RX (no mount) In the box1 x Bolt 6 LT 1500 RX5 x Teradek 6G V Antenna (2dBi 4.9-7.3Ghz RP-SMA)2 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA)1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable Bolt 6 LT RX (V-mount) In the box1 x Bolt 6 LT 1500 RX V-Mount5 x Teradek 6G V Antenna (2dBi 4.9-7.3Ghz RP-SMA)2 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA)2 x Bolt 4K LT RX Battery Cover2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable Bolt 6 LT RX (GOLD mount) In the box1 x Bolt 6 LT 1500 RX Gold Mount5 x Teradek 6G V Antenna (2dBi 4.9-7.3Ghz RP-SMA)2 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA)2 x Bolt 4K LT RX Battery Cover2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable

TERADEK Bolt 6 LT RX 1500 The Bolt 6 LT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can receive color-accurate, True-HDR videos in under 0.001 milliseconds. Key features of the TERADEK Bolt 6 LT RX include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. Bolt 6 LT RX (no mount) In the box1 x Bolt 6 LT 1500 RX5 x Teradek 6G V Antenna (2dBi 4.9-7.3Ghz RP-SMA)2 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA)1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable Bolt 6 LT RX (V-mount) In the box1 x Bolt 6 LT 1500 RX V-Mount5 x Teradek 6G V Antenna (2dBi 4.9-7.3Ghz RP-SMA)2 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA)2 x Bolt 4K LT RX Battery Cover2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable Bolt 6 LT RX (GOLD mount) In the box1 x Bolt 6 LT 1500 RX Gold Mount5 x Teradek 6G V Antenna (2dBi 4.9-7.3Ghz RP-SMA)2 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA)2 x Bolt 4K LT RX Battery Cover2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable

TERADEK Bolt 6 LT RX 1500 The Bolt 6 LT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. Bolt 6 LT can receive color-accurate, True-HDR videos in under 0.001 milliseconds. Key features of the TERADEK Bolt 6 LT RX include range options designed for a variety of production needs, fast reconnection times, an intuitive, easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 LT series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 LT users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. Bolt 6 LT RX (no mount) In the box1 x Bolt 6 LT 1500 RX5 x Teradek 6G V Antenna (2dBi 4.9-7.3Ghz RP-SMA)2 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA)1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable Bolt 6 LT RX (V-mount) In the box1 x Bolt 6 LT 1500 RX V-Mount5 x Teradek 6G V Antenna (2dBi 4.9-7.3Ghz RP-SMA)2 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA)2 x Bolt 4K LT RX Battery Cover2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable Bolt 6 LT RX (GOLD mount) In the box1 x Bolt 6 LT 1500 RX Gold Mount5 x Teradek 6G V Antenna (2dBi 4.9-7.3Ghz RP-SMA)2 x Teradek 6G Flexible H Antenna "Mushroom" (2dBi 4.9-7.3Ghz RP-SMA)2 x Bolt 4K LT RX Battery Cover2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft Cable

Teradek Bolt 6 Monitor Module 1500 RX Key features of the Bolt 6 RX Monitor Module include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. With the Bolt 6 Monitor Module, Wireless Camera-Control is also made possible, because it integrates directly into SmallHD Smart Monitors. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment. The Bolt 6 RX Monitor Module is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models). Bolt 6 Receiver Monitor Module offers two line-of-sight options: 750 ft., and 1500 ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. In the box 1 x Bolt 6 Monitor Module 1500 RX V Mount / Gold Mount5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x HDMI Adapter Bolt 4K RX Monitor Module

Teradek Bolt 6 Monitor Module 1500 RX Key features of the Bolt 6 RX Monitor Module include range options designed for a variety of production needs, fast reconnection times, intuitive and easy setup with the Bolt Manager App for iOS or Android, and consistent, stable connectivity. The Bolt 6 series utilizes the 6GHz band to give users better image quality and reduced interference. And when used in high-traffic areas, 6GHz wireless frequency gives Bolt 6 users more options for frequency adjustments with 12 new channels. Bolt 6 can also pass metadata, timecode, and start/stop flags from most camera manufacturers. With the Bolt 6 Monitor Module, Wireless Camera-Control is also made possible, because it integrates directly into SmallHD Smart Monitors. Bolt 6 also offers new tools for high-end users to have better visibility over their connections and signals, adding confidence to the workflow no matter how challenging the environment. The Bolt 6 RX Monitor Module is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models). Bolt 6 Receiver Monitor Module offers two line-of-sight options: 750 ft., and 1500 ft. Additionally, you can upgrade your set to include Gold or V-Mount Battery plates. In the box 1 x Bolt 6 Monitor Module 1500 RX V Mount / Gold Mount5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x HDMI Adapter Bolt 4K RX Monitor Module

Teradek Bolt 6 Monitor Module 750 RX The Bolt 6 RX Monitor Module is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This Receiver Monitor Module integrates directly with the SmallHD Smart 7 Monitor Series. Receive color-accurate, 4K HDR videos in under 0.001 seconds. The Bolt 6 Receiver Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With direct integration, the Bolt 6 and Smart monitor are able to share power and video, allowing you to reduce the amount of cables on set. In the boxBOLT 6 750 RX EXTERNAL Antenna1 x Bolt 6 Monitor Module 750 RX V Mount / Gold Mount5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x HDMI Adapter Bolt 4K RX Monitor ModuleBOLT 6 750 RX INTERNAL Antenna1 x Bolt 6 Monitor Module 750 RX V Mount / Gold Mount1 x HDMI Adapter Bolt 4K RX Monitor Module

Teradek Bolt 6 Monitor Module 750 RX The Bolt 6 RX Monitor Module is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This Receiver Monitor Module integrates directly with the SmallHD Smart 7 Monitor Series. Receive color-accurate, 4K HDR videos in under 0.001 seconds. The Bolt 6 Receiver Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With direct integration, the Bolt 6 and Smart monitor are able to share power and video, allowing you to reduce the amount of cables on set. In the boxBOLT 6 750 RX EXTERNAL Antenna1 x Bolt 6 Monitor Module 750 RX V Mount / Gold Mount5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x HDMI Adapter Bolt 4K RX Monitor ModuleBOLT 6 750 RX INTERNAL Antenna1 x Bolt 6 Monitor Module 750 RX V Mount / Gold Mount1 x HDMI Adapter Bolt 4K RX Monitor Module

Teradek Bolt 6 Monitor Module 750 RX The Bolt 6 RX Monitor Module is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This Receiver Monitor Module integrates directly with the SmallHD Smart 7 Monitor Series. Receive color-accurate, 4K HDR videos in under 0.001 seconds. The Bolt 6 Receiver Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With direct integration, the Bolt 6 and Smart monitor are able to share power and video, allowing you to reduce the amount of cables on set. In the boxBOLT 6 750 RX EXTERNAL Antenna1 x Bolt 6 Monitor Module 750 RX V Mount / Gold Mount5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x HDMI Adapter Bolt 4K RX Monitor ModuleBOLT 6 750 RX INTERNAL Antenna1 x Bolt 6 Monitor Module 750 RX V Mount / Gold Mount1 x HDMI Adapter Bolt 4K RX Monitor Module

Teradek Bolt 6 Monitor Module 750 RX The Bolt 6 RX Monitor Module is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This Receiver Monitor Module integrates directly with the SmallHD Smart 7 Monitor Series. Receive color-accurate, 4K HDR videos in under 0.001 seconds. The Bolt 6 Receiver Monitor Module easily attaches to the back of SmallHD’s Cine 7, 702 Touch, and Indie 7 Smart Monitors. With direct integration, the Bolt 6 and Smart monitor are able to share power and video, allowing you to reduce the amount of cables on set. In the boxBOLT 6 750 RX EXTERNAL Antenna1 x Bolt 6 Monitor Module 750 RX V Mount / Gold Mount5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x HDMI Adapter Bolt 4K RX Monitor ModuleBOLT 6 750 RX INTERNAL Antenna1 x Bolt 6 Monitor Module 750 RX V Mount / Gold Mount1 x HDMI Adapter Bolt 4K RX Monitor Module

Teradek Bolt 6 XT 10K RXTeradek Bolt 6 XT 10K RX is a zero-delay video receiver, offering a remarkable wireless range of up to 10,000 feet (3 kilometers) over 5 or 6GHz frequencies. Fully compatible with both Bolt 6 and Bolt 4K transmitters, it integrates seamlessly into any existing Bolt 4K or Bolt 6 system.Delivering visually lossless 4K60 4:2:2 video via two 12G-SDI outputs, the Bolt 6 XT 10K RX ensures professional-grade image quality. Its enhanced directional antenna is specifically designed for superior RF performance, minimizing interference by focusing signal reception and benefiting from robust internal shielding.Its all-in-one enclosure design not only boosts range and reliability in challenging RF environments but it also eliminates the hassle of external antenna cables. This results in a much cleaner setup, expediting deployment from its case onto a c-stand.Control your setup with ease using the Bolt App, which simplifies device pairing, allows fine-tuned frequency adjustments, and includes a built-in spectrum analyzer for advanced RF diagnostics.The Gold Mount version of the Bolt 6 XT 10K RX is compatible with 14V and 26V batteries.FeaturesSuper long range (10,000ft/3km) receiver for Bolt 4K and Bolt 6Supports up to 4K60 10-bit 4:2:2 HDRFully integrated, directional panel antennaBuilt-in Gold or V-Mount battery plate2x 12G-SDI and 1x HDMI outputs

Teradek Bolt 6 XT 10K RXTeradek Bolt 6 XT 10K RX is a zero-delay video receiver, offering a remarkable wireless range of up to 10,000 feet (3 kilometers) over 5 or 6GHz frequencies. Fully compatible with both Bolt 6 and Bolt 4K transmitters, it integrates seamlessly into any existing Bolt 4K or Bolt 6 system.Delivering visually lossless 4K60 4:2:2 video via two 12G-SDI outputs, the Bolt 6 XT 10K RX ensures professional-grade image quality. Its enhanced directional antenna is specifically designed for superior RF performance, minimizing interference by focusing signal reception and benefiting from robust internal shielding.Its all-in-one enclosure design not only boosts range and reliability in challenging RF environments but it also eliminates the hassle of external antenna cables. This results in a much cleaner setup, expediting deployment from its case onto a c-stand.Control your setup with ease using the Bolt App, which simplifies device pairing, allows fine-tuned frequency adjustments, and includes a built-in spectrum analyzer for advanced RF diagnostics.The Gold Mount version of the Bolt 6 XT 10K RX is compatible with 14V and 26V batteries.FeaturesSuper long range (10,000ft/3km) receiver for Bolt 4K and Bolt 6Supports up to 4K60 10-bit 4:2:2 HDRFully integrated, directional panel antennaBuilt-in Gold or V-Mount battery plate2x 12G-SDI and 1x HDMI outputs

Teradek Bolt 6 XT 1500 RX The Bolt 6 XT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This receiver allows you to receive color accurate, True HDR videos in under 0.001 seconds. About 6GHz Wifi routers, cell phones, IOT devices, and competitor wireless video systems are among the many devices that use the 5GHz frequency to communicate wirelessly, making it a highly crowded space where you’ll likely encounter frequent interference and even video dropouts. Bolt 6 uses the newly opened 6GHz wireless frequency for a dramatically quieter wireless environment (though it can still be set up in 5GHz Mode for backwards compatibility). In 6GHz Mode, Bolt 6 users will access faster connections and less interference for a better wireless experience. 6GHz frequency is now available in the US and Canada under UNII-5 government specifications. More countries will open the 6GHz frequency in 2023. In the boxBolt 6 XT 1500 RX No Mount1 x Bolt 6 XT 1500 RX1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI 12G BNC to BNC 18in/46cm Cable1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x USB 2.0 Type A Male to USB Type C Male - 1m CableBolt 6 XT 1500 RX V-Mount / Gold-Mount1 x Bolt 6 XT 1500 RX V-Mount1 x Bolt 6 XT Battery Cover Plate Front2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI 12G BNC to BNC 18in/46cm Cable1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable1 x Bolt 6 XT Battery Cover Plate Rear

Teradek Bolt 6 XT 1500 RX The Bolt 6 XT RX is a real-time wireless video receiver that supports 4K video with Teradek’s patented Zero-Delay technology, now with less interference using the newly opened 6GHz wireless frequency. This receiver allows you to receive color accurate, True HDR videos in under 0.001 seconds. About 6GHz Wifi routers, cell phones, IOT devices, and competitor wireless video systems are among the many devices that use the 5GHz frequency to communicate wirelessly, making it a highly crowded space where you’ll likely encounter frequent interference and even video dropouts. Bolt 6 uses the newly opened 6GHz wireless frequency for a dramatically quieter wireless environment (though it can still be set up in 5GHz Mode for backwards compatibility). In 6GHz Mode, Bolt 6 users will access faster connections and less interference for a better wireless experience. 6GHz frequency is now available in the US and Canada under UNII-5 government specifications. More countries will open the 6GHz frequency in 2023. In the boxBolt 6 XT 1500 RX No Mount1 x Bolt 6 XT 1500 RX1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI 12G BNC to BNC 18in/46cm Cable1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x USB 2.0 Type A Male to USB Type C Male - 1m CableBolt 6 XT 1500 RX V-Mount / Gold-Mount1 x Bolt 6 XT 1500 RX V-Mount1 x Bolt 6 XT Battery Cover Plate Front2 x Screw Flat Head Phillips1 x (Bit 118) 2pin Conn. to PowerTap - 18in/46cm Cable1 x SDI 12G BNC to BNC 18in/46cm Cable1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable5 x Antenna 2dBi Rigid V 4.9-7.3Ghz RP-SMA1 x USB 2.0 Type A Male to USB Type C Male - 1m Cable1 x Bolt 6 XT Battery Cover Plate Rear