MID49 Pickle Trigger for ARRI Standard 3pin FischersThe Pickle Trigger for ARRI Standard 3pin Fischers attaches to any device that can accept a close-to-ground start / stop signal over a 3-pin Fischer like ARRI Alexa, Sony Venice, and cameras with power distribution boxes like our DB-4, DB-8, DB-9, DB-10, and DB-11.Gherkin bumps provide an excellent grip surface, and the pickle is 5 inches long. This can also be done with a LANC trigger, so send us an email if you need one! Choose between 3 ft and 10 ft cable lengths
MID49 Pickle Trigger for ARRI Standard 3pin FischersThe Pickle Trigger for ARRI Standard 3pin Fischers attaches to any device that can accept a close-to-ground start / stop signal over a 3-pin Fischer like ARRI Alexa, Sony Venice, and cameras with power distribution boxes like our DB-4, DB-8, DB-9, DB-10, and DB-11.Gherkin bumps provide an excellent grip surface, and the pickle is 5 inches long. This can also be done with a LANC trigger, so send us an email if you need one! Choose between 3 ft and 10 ft cable lengths
NEUTRIK NC3FX-TOP 3 pole female cable connector, TRUE OUTDOOR PROTECTION (TOP), gold contacts The X-TOP series is a "heavy-duty" XLR cable connector for outdoor use. IP65 rating and certified outdoor protection to UL 50E by mating with related cable or chassis connector of the XLR TOP range. Features Heavy-duty sealed XLR connector range for harsh and demanding environmentIP65 rating and certified outdoor protection to UL 50E (in combination with a TOP range counterpart)Uses high impact UV resistant materials
OBSBOT USB-C to Ethernet Adapter Obsbot USB-C to Ethernet Adapter is specifically designed for OBSBOT Tail Air's ethernet connectivity, providing stable and smooth gigabit. Features Designed for stable ethernet connectionPower over ethernet (PoE) support to router and other terminalsExtra power supply via USB-C port when PoE is not available
PATONA Premium PD100W D-Tap to USB-C Adapter The PATONA PD100W is an adapter from D-Tap to USB-C. The power supply works in both directions, i.e. with this adapter the battery can supply and receive power. Due to its size and weight, it is smaller and lighter than a conventional charger. Technical Data Bi-directional transfer from D-Tap to USB-Cmaximum power transmission: 100WD-Tap Output / Input: 12V – 16,8V, 10AUSB-C Output / Input: 3V – 20V, 5Aintelligent recognition of charging protocolsSupported charging protocols: FCP, AFC, SCP, DRP, Try SRC, PD3.0, QC2 / QC3.0 / QC3.0+automatic adjustment of the output voltageProtection against over/under voltage, short circuit and overload of the battery packStand-by power consumption: 0,18mALED control light (blue light during operation, no light when not connected)Material: aluminum alloy, plasticDimensions: 250 x 35 x 17mm (L x B x H)Weight: 52gr
SHAPE 100W D-TAP TO USB-C BI-DIRECTIONAL CHARGING ADAPTER SKU: DTUC This 100W D-TAP to USB-C adapter is engineered to work seamlessly with USB-C to USB-C charging cables, making it the ideal partner for SHAPE 450W Fast Charger. It’s your go-to solution for charging batteries with D-Tap ports, including popular Gold Mount, V-Mount, and BP-U batteries. Say goodbye to the hassle of carrying multiple chargers for different battery types. 100W D-tap to USB-C Bi-Directional Charging AdapterIs used in combination with USB-C to USB-C charging cables with SHAPE’s 450W Fast Charger to charge batteries with D-Tap ports (Gold Mount/V-Mount/BP-U)Uses PD charging protocol Type C10-16.8 V, 10 A output on D-TapType C Output / Input: 3.3-20V, 5ALED light to confirm charge. Technical dataMaterial: Aluminum-AlloyColor: BlackStand-by Power Consumption: 180uALED Status: Blue Light - NormalTurn Off – Disconnect or Protocol not SupportedD-Tap Output/Input: 10-16.8V, 10A. (+,- Pins Identified)Type-C Output/Input: 3.3V-20V, 5A (Intelligent Recognition on Charging Protocols, Auto-adaptation on Output Voltage & Current)Dimensions: 260mm(L) x 36mm(W) x 17mm(H)Weight: 49g
SmallHD 12-inch Micro HDMI to Micro HDMI Cable SmallHD 12-inch Micro HDMI to Micro HDMI Cable has following featuresCustom Made for the FOCUS monitorCable Ends: Micro HDMI Type D, Micro HDMI Type DLength: 30.48cm
smallHD 24-inch Micro to Full HDMI Cable SKU: CBL-SGL-HDMI-MICRO-FULL-24 SmallHD 24-inch Micro HDMI to Full HDMI Cable has following featuresCustom Made for the FOCUS monitorCable Ends: Micro HDMI Type D, Full HDMI Type CLength: 60.96cm
TILTA Nucleus-M 3-Pin to 7-Pin Motor Power + Arri R/S Cable SKU: RS-03-AM Compatible with any 3-pin Fischer R/S port: Arri Alexa SXT, Arri XT, Arri Amira, Arri Alexa LF Tilta 3-pin to 7-pin cable for the Nucleus-M allows you to power the motors from 3-pin power while also giving you run/stop capabilities in camera systems that support it. To power all of the motors, simply plug this cable into one of the motors and then daisy chain power to the other motors using the Nucleus-M 7-pin to 7-pin power cables. Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and handles.
TILTA Nucleus-M 7-Pin to 7-Pin Motor to Motor Connection Cable TILTA Nucleus-M 7-pin to 7-pin power cable is used to provide a daisy-chained link between two Nucleus-M follow focus motors enabling both communication and power distribution between motors. Note that a P-tap to 7-pin or 3-pin to 7-pin cable is needed to power one of the motors first before this cable transfers power and information to another motor.
TILTA Nucleus-M 7-Pin to 7-Pin Motor to Motor Connection Cable TILTA Nucleus-M 7-pin to 7-pin power cable is used to provide a daisy-chained link between two Nucleus-M follow focus motors enabling both communication and power distribution between motors. Note that a P-tap to 7-pin or 3-pin to 7-pin cable is needed to power one of the motors first before this cable transfers power and information to another motor.
Vocas Remote cable for RED KOMODO and V-RAPTOR SKU: 0390-0161 Remote cable for RED KOMODO and V-RAPTOR cameras compatible with the perfect fit Wooden handgrip with switch (0390-0115), Remote switch for 19 mm or 20 mm tubes (0390-0160) and Separate remote switch (0390-0140) to offer a start/stop connection for the RED KOMODO and RED V-RAPTOR cameras. length: 250 mmstretched 600 mm
Wooden Camera LCD/EVF Cable (RED, R/R, 12") SKU: 175000 LCD/EVF Cable (RED, R/R, 12") is a cable that connects RED Epic/Scarlet to Bomb EVF, Touchscreen, LCD, etc. Right angle connectors on both ends with 12 inch cable length. Straight to right angle combinations also available. Weight 71gDimensions 304.8 mm x 38.6 mm x 13.5 mm
Wooden Camera LCD/EVF Cable (RED, R/R, 24") SKU: 175200 LCD/EVF Cable (RED, R/R, 24") is a cable that connects RED Epic/Scarlet to Bomb EVF, Touchscreen, LCD, etc. Right angle connectors on both ends with 24 inch cable length. Manufactured using LEMO compatible connectors. Straight to right angle combinations also available. Weight 92 gDimensions 609.6 mm x 39.2 mm x 13.7 mm
Wooden Camera LCD/EVF Cable (RED, R/S, 18") SKU: 175100 LCD/EVF Cable (RED, R/S, 18") is a cable that connects RED Epic/Scarlet to Bomb EVF, Touchscreen, LCD, etc. Right angle connector on one and and straight on the other with 18 inch cable length. Manufactured by using LEMO compatible connectors. Right angle to right angle combinations also available Weight 74 gDimensions 457.2 mm x 39.6 mm x 11.4 mm
Wooden Camera LCD/EVF Cable (RED, R/S, 36") SKU:182300 LCD/EVF Cable (RED, R/S, 36") is a cable that connects RED Epic/Scarlet to Bomb EVF, Touchscreen, LCD, etc. Right angle connector on one and and straight on the other with 36 inch cable length. Specifications Weight 102 gDimensions 914.4 mm x 38.6 mm x 12.3 mm
Wooden Camera RED Male Pogo to Female Pogo LCD/EVF Cable (36", RED DSMC2) SKU: 221300 RED Male Pogo to Female Pogo LCD/EVF Cable (36") is a cable that allows the RED displays to be moved off the top of the RED Weapon/Scarlet-W/Raven and into a position more easily viewed. The male pogo connector attaches to the camera body without tools and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera Mini 4pin XLR to Full 4pin XLR SKU: 209300 Adapts mini 4pin XLR (female) to standard 4pin XLR (male). Wiring also compatible with TV Logic monitors and Alphatron EVF. Heavy gauge wires can withstand more than 10A at 14.4V. Cable length 20.3 cm
Wooden Camera RED Male LEMO to Female Pogo LCD/EVF Cable (12", Weapon/Scarlet-W/Raven) SKU: 221400 RED Male LEMO to Female Pogo LCD/EVF Cable (12") is a cable that allows the RED displays to be attached to products like the Easy Top (Weapon/Scarlet-W/Raven) and the RED LEMO Adapter A. The male LEMO connector attaches to any RED Standard 16pin LEMO and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male LEMO to Female Pogo LCD/EVF Cable (24", Weapon/Scarlet-W/Raven) SKU: 221500 RED Male LEMO to Female Pogo LCD/EVF Cable (24") is a cable that allows the RED displays to be attached to products like the Easy Top (Weapon/Scarlet-W/Raven) and the RED LEMO Adapter A. The male LEMO connector attaches to any RED Standard 16pin LEMO and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male LEMO to Female Pogo LCD/EVF Cable (36", Weapon/Scarlet-W/Raven) SKU: 221600 RED Male LEMO to Female Pogo LCD/EVF Cable (36") is a cable that allows the RED displays to be attached to products like the Easy Top (Weapon/Scarlet-W/Raven) and the RED LEMO Adapter A. The male LEMO connector attaches to any RED Standard 16pin LEMO and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male Pogo to Female Pogo LCD/EVF Cable (12", RED DSMC2) SKU: 221100 RED Male Pogo to Female Pogo LCD/EVF Cable (12") is a cable that allows the RED displays to be moved off the top of the RED Weapon/Scarlet-W/Raven and into a position more easily viewed. The male pogo connector attaches to the camera body without tools and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male Pogo to Female Pogo LCD/EVF Cable (24", RED DSMC2) SKU: 221200 RED Male Pogo to Female Pogo LCD/EVF Cable (24") is a cable that allows the RED displays to be moved off the top of the RED Weapon/Scarlet-W/Raven and into a position more easily viewed. The male pogo connector attaches to the camera body without tools and the female pogo connector has a slotted design that can be bolted to any two 1/4-20 screws holes up to 54mm apart, center to center. 1/4-20 threaded holes are also found on the bottom of the female pogo connector for attaching to WC Magic Arms. The braided, flexible cable makes positioning easy and is great for gimbal use.
Wooden Camera RED Male Pogo to Male LEMO LCD/EVF Cable (12", Weapon/Scarlet-W/Raven) SKU: 221700 RED Male Pogo to Male LEMO LCD/EVF Cable (12") is a cable that allows the original RED displays to be attached to the new RED Weapon/Scarlet-W/Raven DSMC2 cameras. The male pogo connector attaches to the camera body without tools and the Male LEMO connector attaches to the original RED LCD/EVF using the standard 16pin LEMO connector. The braided, flexible cable makes positioning easy and is great for gimbal use.