The Anton Bauer CINE VCLX is an advanced battery for film and video applications. This Anton Bauer CINE VCLX battery offers 28VDC cine and 14.4VDC video capabilities. It features Anton Bauer diagnostics, protection and a rugged case design.
Size: 10.00 x 12.75 x 5.50 in (25.40 cm x 32.39 cm x 13.97 cm) Weight: 25.0 lbs (11.3 kg) (2) 4p XLR for 14.4v and (1) 3p XLR for 28v. Provides Dual simultaneous outputs (20 amps@ 14.4v ; 12 amps @28v) 14.4v and 28v 560Wh NiMH battery Integral digital features ON/OFF switch REALTIME display Compatible with CINE VCLX charger MAXX 1.5 Warranty
Anton Bauer CINE VCLX
Anton Bauer CINE VCLX charges the CINE VCLX, VCLX-CA and VCLX/2 battery in approximately 7 hours
Note: CS-GBC cable required for charging.
Size: 10.25 x 9.50 x 2.25 in (26.04 cm x 24.13 cm x 5.72 cm)Weight: 3.9 lbs (1.8 kg)Charges the CINE-VCLX, VCLX-CA and VCLX/2 battery in seven hours7 full-time operating charge terminationsAC Input:100-240 VAC, 50/60 Hz. Wide Range InputMeets regulatory requirements including CE and FCCField upgradable firmware for future compatibilityMAXX 1.5 Warranty
Core SWX Powertap Breakout Adapter
The PTM-3PTF is a powertap breakout cable tripling the number of female powertap outputs available from any battery mount plate. It is perfect for powering multple accessories and can handle up to 10A.
Anton Bauer PowerTap Multi
Male PowerTap to 4 Female PowerTap receptacles.
Expands any Gold Mount PowerTap to accommodate up to four separate devices. Anton Bauer PowerTap Multi is perfect for powering multiple wireless receivers, on-board monitors as well as an Ultralight from a single camera battery (10 amp max total).
The next step in mini power has arrived in the shape of a mini X-Boxx floor battery. Hawk-Woods X-Boxx brand has a long established history for delivering power for demanding equipment such as professional film cameras or lighting applications. The X-boxx range has stood up over the years, proving to be robust and long serving to it's users! The X-Boxx mini gives you all the advantages of a conventional battery box but now is more compact plus lighter then it's predecessors and competition. Monitor your power usage with the new graphic display, featuring run time remaining, battery voltage plus accurate charging status. The lightweight box provides a huge 880Wh of power capacity along with four outputs featuring 2x XLR4 14v nominal and 2x XLR3 28v regulated chassis mounted connectors. This battery has a built in charger making this a complete unit for most power applications on set. If preferred you can still charge via one of the XLR4 connectors with one of our X-Boxx chargers. The MXB-880 offers up a solid carry handle plus an optional carry strap will be supplied. The box also boasts large rubber end caps to protect the battery and enhance the image of this smart, sleek looking battery! Hawk-Woods MXB-880 is more than capable of powering your full setup!
Weight: 7.2kgSize: 21.6 x 21.6 x 13.6 cmNominal Voltage: 14.4vWattage: 880WhCurrent: 16A
Core SWX Renegade
Core SWX RNG7 is a LiFEPO4 block battery with 15v, 28v, and 48v outputs.
The Core SWX Renegade is a 777wh, Lithium Iron Phosphate(LIFEPO4) power station incased in a polycarbonate housing offering a lighter option to the Maverick and new Renegade XL. It can deliver 15v, 28v and 48 simultaneously with up to a 1200w output. From a fully discharged state, the included PFQ8 external charger can recharge the Renegade in less than 3.5 hours. A runtime LCD, similar to that found on our Maverick power station, provides up to the minute runtime/charge time and percentage capacity, as well as an approximate runtime when in standby.
Cell Chemistry: LiFEPO4 Capacity: 777wh(28.8v, 27AH) Size: 24,28 cm x 34,80 cm x 13,46 cm Weight: 9,83 kg Voltage Outputs: 2x XLR 4p 15v(regulated), 2x XLR 3p @28v(DC 22.5v-32.85v), 1x PowerConn @ 48v(regulated) Max Load: 20A @ 15v, 20A @ 28v, 15A @ 48v) Built-in Protections: Temperature(internal), Voltage(internal), Current(resettable internal) Capacity Monitoring: Backlit LCD Charge Time: 3.5hrs with PFQ8 external charger(included) AC Mains Input: 100-240VAC 50/60Hz Build: Polycarbonate and Sheet Aluminum
Core SWX Renegade XL 48
The Renegade series is a new series of power stations/block batteries that consists of 3 different models - Renegade, Renegade XL, and Renegade XL 48. The Renegade and Renegade XL both have 4-pin 15v, 3-pin 28v, and powerconn for 48v, then the Renegade XL 48 has the two 48v to be able to power lighting such as the Aputure 1200D at full output.
Open your door to these new products to experience the next generation of power stations offering super high capacities with the fastest recharge times in the industry yet!
The Core SWX Renegade XL48 variant has got you covered with its dual 48v, 15amp outputs capable of powering an Aputure 1200D at full output using just a single battery source. From a fully discharged state, the internal charger can recharge the RenegadeXL in less than 5 hours. With the available(but not included) SFQ40, the Renegade XL can recharge in less than 2 hours. The external charge ports also serve as “daisy-chain” ports to allow you to connect several Renegade XL’s in parallel to increase available battery capacity.
2 Year WarrantyDaisy ChainInternal ChargingMobile Power StationModular BuildOLED DisplaySFQ External Rapid ChargeSmart TapUSB Power
Cell Chemistry: Li-Ion Capacity: 1376Wh(14.8v, 93Ah) Size: 24,28 cm x 34,80 cm x 13,46 cm Weight: 14,86 kg Voltage Outputs: 2x PowerConn @ 48v (regulated) Max Load: 15A each, 30A total Built-in Protections: Temperature(internal), Voltage(internal), Current(resettable external and internal) Capacity Monitoring: OLED Display and LED Handle Aux Output: 2x Ptap(10A, 14.4v unregulated) USB Output: 1x USB-A(5v, 3A) Charge Time: 5.5hrs with built-in charger or 2 hours with SFQ40 external charger AC Mains Input: 100-240VAC 50/60Hz Build: Cast and Sheet Aluminum
Core SWX Maverick Block Battery
The Core SWX Maverick Block Battery is the next generation, all encompassing block battery system for cinema and lighting applications.
Mobile Power Station with High Current Delivery
Built for high demand situations, the MV6 can sustain up to 20A draw on both 14v and 28v outputs simultaneously, plus provide USB and ptap outputs.
Built with premium Nickel Metal Hydride cells from Japan, this pack will sustain several thousand cycles of usage with minimal degradation and allow for easy aire shipping and travel.
Aux Power with Preventative Maintenance Functions
Being a complete mobile power station means you must be able to power all devices on location. The MV6 includes 2 ptap outpus (12-17vdc) to power auxiliary devices and a 5v USB output to charge mobile devices. The green Smarttap also can provide battery diagnostics on the internal cell packs within the unit and the USB doubles as a firmware upgrade port allowing fas "drag and drop" updates by plugging in to a PC.
Core designed the MV6 understanding the need for predictive service. The modular build allows for quick service and if necessary, replacement of the charger module and battery cells. Less downtime and labour time, equates to more uptime, useability and ROI.
A Friendly Form Factor
Understanding many already have shipping cases from their older block battery packs, the MV6 was designed to fit in legacy shipping cases. With the new MV6, you can use the rear compartment, previously used for old charging stations, for additioanl cabling and accessories. The Nickel Metal Hydride cell composition allows for easy shipment and air travel. The form factor also works with the existing dolly install base making the Maverick and "on-dolly" power station.
Backlit Runtime LCD with Diagnostic Reporting
The MV6 features a Runtime LCS similar to that of our on-board packs. The LCD prides 3 phase status reporting;
Reports 100w dummy load runtime when not in discharge/chargeCalculates remaining runtime when in use based on actual loadCalculates remaining charge time when charging
The MV6 has a standard IEC AC input for charging from AC Mains. Plug the unit in to 110-240V AC and it will charge back up in 5hrs.
An LEC array in the handle illuminates when charging to display charge status from afar. The LED array can also display capacity status when in use. A recessed switch in the handle allows for control of the lED brightness as well as disabling the LED array.
The Maverick was designed to handle the rigours of productions and we know that sometimges means inclement weather and puddles. It's all aluminium modular design provides a robust form while providing up to 7.5" of water resistance.
Anton Bauer VCLX NM2
Power through your next production with VCLX NM2, the advanced evolution of Anton Bauer’s Academy Award winning block battery system. The versatile freestanding 600Wh power station drives demanding high-current camera and lights with consistent power at 14.4V, 28V and 48V for peak performance on cinematic productions. Engineered to withstand the rigors of set life, advanced battery management technology prolongs the life of the battery while protecting your powered equipment.
The Anton/Bauer VCLX NM2 comes with fleet management built in, enabling you to download all of the vital information via WiFi or USB in an instant. Anton/Bauer’s fleet management software will instantly tell you the learned capacity of the battery, the number of cycles that it has run, the percentage charge of the unit and if there are any errors these will be clearly highlighted and time stamped enabling quick triage and rectification. All of this means that your fleet of VCLX NM2s will spend less time in your building and more time on set.
Monitor remaining runtime, charge time and active power draw at a glance with the 2.4” color LCD screen. Perform real-time onboard diagnostics to keep your battery and equipment performing perfectly. Focus on the action on set while VCLX smart technology calculates everything being powered via XLR3 or XLR4 for maximum power efficiency.
Rugged and reliable for perfect performance. Designed to withstand the rigors of set life, grip trucks and shipping cases, VCLX NM2 is engineered from tough anodized aluminum with over-molded end caps and handle grip. Passive cooling means no fan noise on set, and a sealed water-resistant case guarantees true go anywhere power.
Fully charged in 5 hours
The VCLX NM2 now charges twice as fast as the previous VCLX. The VCLX NM2 features a slim and portable VCLX 2 magnetic charger which attaches to the side of the VCLX NM2 allowing you to charge the battery from 0-100% in just 5 hours.
Core SWX Renegade XL
Core SWX Renegade XL is a Li-Ion block battery with 14v, 28v, and 48v outputs.
The Renegade XL model is Lithium Ion (Li-Ion) based power station encased in a cast aluminum housing, with a capacity of 1376wh. The Renegade XL1's ability to deliver 15v, 28v, or 48v making it a versatile power source for various cinema equipment, including cameras, lighting, and other accessories. With its high capacity and multiple output options, it can power a variety of devices simultaneously, providing a reliable power source for your production needs.
The Renegade XL’s new dynamic color OLED display can provide the same runtime LCD as with the Renegade and Maverick but also offers additional function and battery status. As Aux outputs always a welcomed inclusion, the Renegade XL is complimented by 2 ptap ports and a USB which can power mobile devices but doubles as a FW update port. One of the two ptap ports also supports Voltbridge Mesh, allowing for cloud fleet battery management.
The Renegade XL's groundbreaking built-in charging system, can recharge its massive 1376Wh capacity in just 5 hours, was first introduced on it’s nickel metal hydride cousin, the Maverick. Moreover, the Renegade XL also provides unparalleled flexibility and efficiency with the optional SFQ40 rapid charger, which can charge one Renegade XL in an astonishing 2.5 hours, setting a new industry benchmark in the cinema world.
Cell Chemistry: Li-Ion Capacity: 1376Wh(14.8v, 93Ah) Size: 24,28 cm x 34,80 cm x 13,46 cm Weight: 14,86 kg Voltage Outputs: 2x XLR 4p 14v(DC 11-17v), 1x XLR 3p @28v (regulated), 1x PowerConn @ 48v(regulated) Max Load: 12A @ per 14v, 12A @ 28v, 15A @ 48v) Built-in Protections: Temperature(internal), Voltage(internal), Current(resettable external and internal) Capacity Monitoring: OLED Display and LED Handle Aux Output: 2x Ptap(10A, 14.4v unregulated) USB Output: 1x USB-A(5v, 3A) Charge Time: 5.5hrs with built-in charger or 2 hours with SFQ40 external charger AC Mains Input: 100-240VAC 50/60Hz Build: Cast and Sheet Aluminum
We ship with:
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Hotline +49 211 930 730-33
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
The cookie is used to provide the system with the user's current time zone.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
The cookie is used to store the cookie settings of the site user over several browser sessions.
The cookie is used for payment transactions via Amazon.
Saves which cookies have already been accepted by the user for the first time.
The cookie is used to differentiate the cache for different scenarios and page users.
Service cookies are used to provide the user with additional offers (e.g. live chats) on the website. Information obtained via these service cookies may also be processed for site analysis.
The cookie is used to track user interaction with the site search. The data can be used to optimize the search function.
Stores a timestamp to hide elements for a certain time if desired.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Marketing cookies are used by third-party vendors or publishers to display personalized advertisements. They do this by tracking visitors across websites.
Dieses Cookie wird gesetzt, wenn ein User über einen Klick auf eine Google Werbeanzeige auf die Website gelangt. Es enthält Informationen darüber, welche Werbeanzeige geklickt wurde, sodass erzielte Erfolge wie z.B. Bestellungen oder Kontaktanfragen der Anzeige zugewiesen werden können.
The cookie is used by Google AdSense to promote advertising efficiency on the website.
This cookie is used by Bing to gather anonymous information on how visitors are using the website.
Cookies used for statistics and shop performance metrics.
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
We respect your privacy