Wooden Camera D-Box for FUJIFILM GFX ETERNA 55 A00932
€800.00
Wooden Camera D-Box for FUJIFILM GFX ETERNA 55
The D-Box™ plays a critical role in the camera's power system by acting as both a power distribution hub and a hot swap for other powered accessories. Its primary function is to supply power to the camera to ensure continuous operation throughout filming. In addition, it distributes power to other connected accessories, serving as the central power management point for the entire camera setup. The D-Box has two P-Tap ports, a DC-IN port for power supplies and hot swapping, an EXT port to distribute power and trigger communication, and a Remote Port that translates trigger information into the D-Box.
The DC-IN port allows hot-swapping of the on-board battery without powering down the camera or attached accessories with a green LED indicator confirming that the port is active. The 5-Pin EXT port distributes trigger signals and power to the Power Strip (sold separately). The D-Box also features an eject button for quick battery swaps and a blue LED indicator that lights up when power is drawn from that source.
The D-Box has a built-in electronic fuse that prevents overcurrent to accessories, allowing uninterrupted power to the camera. A red LED indicator illuminates if the electronic fuse is triggered. For camera control, the D-Box includes a Remote Port that accepts a TRS cable, which carries Run/Stop signals from the camera to the D-Box and then passes them through the 5-Pin EXT port to the Power Strip. Finally, the D-Box is designed with two screw-in points on its underside, allowing for direct attachment of our support bracket for secure and stable integration into the camera rig using our Riser Plate. Note: Remote port on DBox for future FUJIFILM ETERNA GFX 55 Firmware Update
Specifications
Weight
- Gold Mount: 293.3 g
- V-Mount: 277.6 g
Dimensions
- Gold Mount: 74 x 47.5 x 99.4 mm
- V-Mount: 78.3 x 39 x 105.2 mm
Details of the manufacturer
- Wooden Camera
- 8 Mason Irvine
- California 92618, United States
+1 855.966.3226
https://woodencamera.com/pages/contact-us
Details of the person responsible for putting the product on the European market
- New Media AV Bauer und Trummer GmbH
- Johannes Bauer
- Pirnaer Straße 20
- 90411 Nürnberg, Germany
+49 911 5399-60
Similar products
D-Box (Sony BURANO) Add power accessory options on the Sony BURANO by adding the D-Box to your camera system, the D-Box provides additional 12V 2-pin, a D-tap port and a 3-pin 24V power options. The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. Choose from either a Gold Mount or V-Mount option. D-Box V Mount (Sony BURANO): Weight: 400.5 g | Dimensions: 96 x 47 x 135 mmD-Box Gold Mount (Sony BURANO): Weight: 394.6 g | Dimensions: 100 x 38 x 136 mm
D-Box (Sony BURANO) Add power accessory options on the Sony BURANO by adding the D-Box to your camera system, the D-Box provides additional 12V 2-pin, a D-tap port and a 3-pin 24V power options. The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. Choose from either a Gold Mount or V-Mount option. D-Box V Mount (Sony BURANO): Weight: 400.5 g | Dimensions: 96 x 47 x 135 mmD-Box Gold Mount (Sony BURANO): Weight: 394.6 g | Dimensions: 100 x 38 x 136 mm
D-Box (RED KOMODO-X) Expand your power options on the KOMODO-X by adding the D-Box to your system, this D-Box converts from the camera’s native V-Mount to Gold Mount. The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. There are additional 12V 2-pin, a D-tap port and a 3-pin 24V power options. When connected to the EXT port of the camera, Run/Stop is enabled on both the D-Box as well as the B-Box for (KOMODO, KOMODO-X, V-RAPTOR). On the assistant's side of the camera there is a DC-In port for connecting additional power items like block batteries and an EXT Out option is also included to pass connectivity options to a B-Box to be connected to the system, as needed.Included Items: EXT Cable (9-pin 0B RA Male to 9-pin 0B RA Male, 5in) SpecificationsD-Box Gold Mount (RED KOMODO-X): 259 g | 38.9 x 78.25 x 105 mmD-Box V Mount (RED KOMODO-X): 273.5 g | 48 x 103 x 100 mm
D-Box (RED KOMODO-X) Expand your power options on the KOMODO-X by adding the D-Box to your system, this D-Box converts from the camera’s native V-Mount to Gold Mount. The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. There are additional 12V 2-pin, a D-tap port and a 3-pin 24V power options. When connected to the EXT port of the camera, Run/Stop is enabled on both the D-Box as well as the B-Box for (KOMODO, KOMODO-X, V-RAPTOR). On the assistant's side of the camera there is a DC-In port for connecting additional power items like block batteries and an EXT Out option is also included to pass connectivity options to a B-Box to be connected to the system, as needed.Included Items: EXT Cable (9-pin 0B RA Male to 9-pin 0B RA Male, 5in) SpecificationsD-Box Gold Mount (RED KOMODO-X): 259 g | 38.9 x 78.25 x 105 mmD-Box V Mount (RED KOMODO-X): 273.5 g | 48 x 103 x 100 mm
Wooden Camera D-Box (RED DSMC2, Gold Mount) SKU: 234000 Wooden Camera D-Box (Weapon/Epic-W/Scarlet-W/Raven, Gold Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the RED DSMC2 cameras. The D-Box is completely tool-less for installation and utilizes our Cable-less interface which attaches directly to the back of the camera body, Base Expander Module, REDVolt Expander Module, and the OffHollywood O-Mods. Connectors on the D-Box (Weapon/Epic-W/Scarlet-W/Raven, Gold Mount) are contoured to match the Expander Modules' which allow for all cables to be installed with no collisions. The module communicates with the camera and allows any ARRI standard start/stop trigger to be used with the 3pin Fischer port. The DC input on the D-Box is the same as the camera's LEMO allowing for an AC power supply or external power plate to be connected to power accessories and camera during a battery change. When both battery and DC input are utilized, the Wooden Camera D-Box defaults to the DC input, leaving the battery fully charged. Authentic Anton Bauer Gold Mount plate provides 2x D-Tap (unregulated) on the power plate itself but we should note that one D-Tap is obscured by the right side power outputs. Inside the D-Box is a 10A fuse and replacement fuses are included. Weight: 610g Dimensions: 228.6 mm x 177.8 mm x 127 mm D-Box Connections 1. D-Tap - 12V Unregulated - This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO2. D-Tap - 12V Unregulated - This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO3. 2 pin LEMO - 12V Unregulated - ARRI standard wiring4. 2 pin LEMO - 12V Unregulated - ARRI standard wiring5. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 3A shared between the two 3pin Fischers- ARRI standard start/stop capabilities6. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 3A shared between the two 3pin Fischers- ARRI standard start/stop capabilities7. USB - 5v Regulated - Provides 2A for iPhone/iPad charging8. DC Input - 12-16V- DC input on the D-Box is the same as the camera's LEMO- Priority is given to DC Input to preserve battery charge when both sources connected
Wooden Camera D-Box (Alexa Mini, Gold Mount) SKU: 209100 D-Box (Alexa Mini, Gold Mount) is a custom version of popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the ARRI Alexa Mini. Two 16 inch (40cm) cables exit the power plate with one going to the 8pin LEMO power plug and the other going to the 7pin EXT port. The bottom of the D-Box has (3) 1/4-20 holes which can attach directly to Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). For an adjustable mount system, use the Battery Slide paired with the same Rod Clamps listed above. Wooden Camera D-Boxwill attach to the ARRI BAP-1 and instructions on how to do this are included in the box. Authentic Anton Bauer plate provides 1x D-Tap (unregulated) and is hard wired to the D-Box. D-Box Slots Included 7 pin LEMO - EXT PortReplica of connector on rear of cameraMaintains functionality of external communication, R/S, and powerNote this slot is not swappable2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable4 pin Mini XLR - 12V InputHot swappable power input with included 7 inch pigtail cable for standard 4 pin XLR (12V nominal)Capable of providing power to accessories and camera with out brick battery attachedNote this slot is not swappable Specifications Weight 534 gDimensions 90 mm x 146 mm x 43mm
Wooden Camera D-Box (URSA Mini, URSA Mini Pro, V-Mount) SKU: 239500 Wooden Camera D-Box (URSA Mini, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the Blackmagic URSA Mini Pro, EF, PL, B4, etc cameras. The D-Box (URSA Mini, V-Mount) attaches directly to the back of the camera body using a special Molex connector eliminating external cabling. It also interfaces with the rear LANC port which is how the D-Box controls the camera's run/stop. Connectors on the D-Box are contoured to match the URSA Mini's which allow for all cables to be installed with no collisions. The module communicates with the camera and allows any ARRI standard start/stop trigger to be used with the 3pin Fischer port. The DC input on the D-Box is a Mini 4pin XLR and the kit also includes a pigtail cable which converts to full size 4 pin XLR (same as the camera's) allowing for an AC power supply or external power plate to be connected to power accessories and camera during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged. Authentic IDX V-Mount plate provides 2x D-Tap (unregulated) on the power plate itself but we should note that one D-Tap may be obscured by the right side BNC connectors when in use. The camera receives an unfused connection to the power source and the D-Box connectors share a 7.5A fuse. When using D-Box battery modules it is important to know what amount of power your batteries are capable of providing. Most high-end cinema batteries can supply up to 10A with the URSA Mini camera generally consuming 3-4A in standard configuration. Although the remaining power is available from the D-Taps, LEMOs, Fischers, etc., it is best to limit the power draw to 5A or less for best results. Consuming more power than a battery is capable of providing will cause the battery to shut itself off, killing the camera and accessory power. D-Box Connections 1. D-Tap - 12V Unregulated 2. USB - 5V Regulated 3. 2 pin LEMO - 12V Unregulated - ARRI standard wiring 4. 2 pin LEMO - 12V Unregulated - ARRI standard wiring 5. 3 pin Fischer - 24V Regulated - Regulator built in to convert battery voltage to 24V - Maximum 2A continuous (3A surge) shared between the two 3pin Fischers - ARRI standard start/stop capabilities 6. 3 pin Fischer - 24V Regulated - Regulator built in to convert battery voltage to 24V- Maximum 2A continuous (3A surge) shared between the two 3pin Fischers - ARRI standard start/stop capabilities 7. DC Input - 12-16V - DC input on the D-Box is a Mini 4pin XLR but a pigtail cable is included to full-size 4pin XLR - Priority is given to DC Input to preserve battery charge when both sources connected Camera Compatibility Blackmagic URSA Mini 4KBlackmagic URSA Mini 4.6KBlackmagic URSA Mini Pro
Wooden Camera D-Box (Alexa Mini, V-Mount) SKU: 209200 D-Box (Alexa Mini, V-Mount) is a custom version of the popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the ARRI Alexa Mini. Two 16 inch (40cm) cables exit the power plate with one going to the 8pin LEMO power plug and the other going to the 7pin EXT port. The bottom of the D-Box has (3) 1/4-20 holes which can attach directly to our Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). For an adjustable mount system, use the Battery Slide paired with the same Rod Clamps listed above. This product Wooden Camera D-Box will attach to the ARRI BAP-1 and instructions on how to do this are included in the box. Authentic IDX V-Mount plate provides 2x D-Tap (unregulated) and is hard wired to the D-Box. Inside the D-Box is a 10A fuse. D-Box Slots Included 7 pin LEMO - EXT PortReplica of connector on rear of cameraMaintains functionality of external communication, R/S, and powerNote this slot is not swappable2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable4 pin Mini XLR - 12V InputHot swappable power input with included 7 inch pigtail cable for standard 4 pin XLR (12V nominal)Capable of providing power to accessories and camera with out brick battery attachedNote this slot is not swappable Specifications Weigh t534 gDimensions 90 mm x 146 mm x 43mm
Wooden Camera D-Box (URSA Mini, URSA Mini Pro, Gold Mount) SKU: 239600 Wooden Camera D-Box (URSA Mini, Gold Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap capability to the Blackmagic URSA Mini Pro EF Mount, PL Mount, and B4 Mount cameras. The D-Box attaches directly to the back of the camera body using a special Molex connector eliminating external cabling. It also interfaces with the rear LANC port which is how the D-Box controls the camera's run/stop. Connectors on the D-Box are contoured inline with the URSA Mini body, streamlining port connections and cable management. The module also provides two 3pin Fischer ports, allowing start/stop with any ARRI standard trigger device. The D-Box (URSA Mini, Gold Mount) is equipped with a Mini 4pin XLR DC Input and includes a Mini 4pin XLR to Full 4pin XLR pigtail cable allowing an AC power supply or external power plate to be connected to power the camera and accessories during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged. Authentic Anton Bauer Gold Mount plate provides 2x D-Tap (unregulated) on the power plate itself but we should note that one D-Tap may be obscured by the right side BNC connectors when in use. The camera receives an unfused connection to the power source and the D-Box connectors share a 7.5A fuse. When using D-Box battery modules it is important to know what amount of power your batteries are capable of providing. Most high-end cinema batteries can supply up to 10A with the URSA Mini camera generally consuming 3-4A in standard configuration. Although the remaining power is available from the D-Taps, LEMOs, Fischers, etc., it is best to limit the power draw to 5A or less for best results. Consuming more power than a battery is capable of providing will cause the battery to shut itself off, killing the camera and accessory power. D-Box Connections 1. D-Tap - 12V Unregulated2. USB - 5V Regulated3. 2 pin LEMO - 12V Unregulated - ARRI standard wiring4. 2 pin LEMO - 12V Unregulated - ARRI standard wiring5. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 2A continuous (3A surge) shared between the two 3pin Fischers- ARRI standard start/stop capabilities6. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 2A continuous (3A surge) shared between the two 3pin Fischers- ARRI standard start/stop capabilities7. DC Input - 12-16V- DC input on the D-Box is a Mini 4pin XLR but a pigtail cable is included to full-size 4pin XLR- Priority is given to DC Input to preserve battery charge when both sources connected Camera Compatibility Blackmagic URSA Mini 4KBlackmagic URSA Mini 4.6KBlackmagic URSA Mini Pro
Wooden Camera D-Box (RED DSMC2, V-Mount) SKU: 233900 Wooden Camera D-Box (Weapon/Epic-W/Scarlet-W/Raven, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the RED DSMC2 cameras. The D-Box is completely tool-less for installation and utilizes our Cable-less interface which attaches directly to the back of the camera body, Base Expander Module, REDVolt Expander Module, and the OffHollywood O-Mods. Connectors on the -Box (Weapon/Epic-W/Scarlet-W/Raven, V-Mount) are contoured to match the Expander Modules' which allow for all cables to be installed with no collisions. The module communicates with the camera and allows any ARRI standard start/stop trigger to be used with the 3pin Fischer port. The DC input on the D-Box is the same as the camera's LEMO allowing for an AC power supply or external power plate to be connected to power accessories and camera during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged. Authentic IDX V-Mount plate provides 2x D-Tap (unregulated) on the power plate itself but we should note that one D-Tap is obscured by the right side power outputs. Inside the D-Box is a 10A fuse and replacement fuses are included. Weight: 610gDimensions: 228.6 mm x 177.8 mm x 127 mm D-Box Connections 1. D-Tap - 12V Unregulated - This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO2. D-Tap - 12V Unregulated - This slot can be swapped for Hirose, 2pin LEMO, or 4pin LEMO3. 2 pin LEMO - 12V Unregulated - ARRI standard wiring4. 2 pin LEMO - 12V Unregulated - ARRI standard wiring5. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 3A shared between the two 3pin Fischers- ARRI standard start/stop capabilities6. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 3A shared between the two 3pin Fischers- ARRI standard start/stop capabilities7. USB - 5v Regulated - Provides 2A for iPhone/iPad charging8. DC Input - 12-16V- DC input on the D-Box is the same as the camera's LEMO- Priority is given to DC Input to preserve battery charge when both sources connected
Accessories
Wooden Camera D-Box Support Bracket for FUJIFILM GFX ETERNA 55SKU: A00933The D-Box Support Bracket is essential for preventing accidental disconnections between the D-Box and the camera's V-Mount, especially during activities that may result in camera shake or sudden impact. It attaches to the Riser Plate and secures the D-Box connection, allowing minor height adjustments to accommodate different camera manufacturers' tolerances. The bracket can be tightened using a 3/16" hex tool, a flat head driver, or by hand, ensuring a secure fit and minimizing camera movement. Please note: The Riser Plate and D-Box must be purchased separately for this accessory to function properly.SpecificationsWeight: 21 gDimensions: 49.1 x 10.1 x 22.5 mm