Wooden Camera Core Accessory System (Blackmagic URSA Cine 12K/17K)

Wooden Camera Base Plate System for Blackmagic URSA Cine 12K/17KSKU: K10037 This system includes a Riser Plate and ARCA Base Plate that keeps your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The Riser Plate facilitates an open design, allowing efficient airflow to the camera.These plates combined are compatible with any bridge plates that use ARRI Standard height. Utilizing the built-in ARCA system, it allows for quick transitions between Steadicam, shoulder, or tripod workflows with Wooden Camera ARCA accessories. Four rod clamps– two on either side of the riser plate– provide powerful friction to prevent torque and rotation from your lens motors.Two included 3/8”-16 screws allow the plate to fasten to the bottom of the camera, while two pins incorporated into the riser plate prevent the riser from twisting, making for a secure connection. The Riser Plate features an intuitive wedge-clamp locking system with a thumb-screw for added security and comes with 3/8”-16 mounting points to attach the Riser Plate. These plates combined are compatible with any bridge plates that use ARRI Standard height such as our 19mm Bridge Plate. Included ItemsRiser Plate for Blackmagic URSA Cine 12K/17KARCA Base PlateSpecificationsWeight: 675.9 gDimensions: 160.6 x 135 x 43.1 mm 

Wooden Camera Top Plate for Blackmagic URSA Cine 12K/17KSKU: A00829The Top Plate designed for the Blackmagic URSA Cine 12K/17K incorporates open ports emphasizing air flow and connectivity. This system securely mounts to the top of the camera using three 1/4”-20 screws down the center of the camera and adds multiple 1/4”-20 and 3/8”-16 mounting points across the top and sides of the plate. The rear mounting point on the Assistant’s Side of the camera allows for a mounting point to add the Top Plate Extension Block, while the front-facing 3/8”-16 mounting points allow users to add accessories like the Front Dual Rod Clamp to secure 15mm rods for accessories like EVF’s or lens motors. With the forward facing 3/8”-16 mounting points, users can add accessories like Bolt-On Rods or a Maxi Rod Light for lens motors. This Top Plate is compatible with the stock Blackmagic URSA handle.SpecificationsWeight: 412.8gDimensions: 160.6 x 135 x 56 mm

Wooden Camera Top Plate System for Blackmagic URSA Cine 12K/17KSKU: K10038The Top Plate System designed for the Blackmagic URSA Cine 12K/17K incorporates open ports emphasizing airflow. It includes the Top Plate, Front Dual Rod Clamp, and Top Plate Extension Block. This system securely mounts to the top of the camera using three 1/4”-20 screws down the center of the camera and adds multiple 1/4”-20 and 3/8”-16 mounting points across the top and sides of the plate.With the front-facing 3/8”-16 mounting points, users can add the included Front Dual Rod Clamp to secure 15mm rods for accessories like EVF’s or lens motors. Forward-facing 3/8”-16 mounting points allow users to add accessories like Bolt-On Rods for lens motors. This Top Plate is compatible with the stock Blackmagic URSA handle.Included ItemsTop Plate Extension Block for Blackmagic URSA Cine 12K/17KTop Plate for Blackmagic URSA Cine 12K/17KTop Plate Dual Rod Clamp - FrontSpecificationsWeight: 675.9 gDimensions: 107 x 65 x 144 mm

Wooden Camera Elite Accessory System for Blackmagic URSA Cine 12K/17KSKU: K10041Optimize the Blackmagic URSA Cine 12K/17K with an accessory system that compliments its design and adds features to efficiently build out the camera without impeding on ports or usability.Riser Plate and ARCA Base PlateThis system starts with a Riser Plate and ARCA Base Plate that keeps your build at the appropriate optical height for mounting accessories in traditional cinema workflows. The Riser Plate facilitates an open design, allowing efficient airflow to the camera. These plates combined are compatible with any bridge plates that use ARRI Standard height. Utilizing the built-in ARCA system, it allows for quick transitions between Steadicam, shoulder, or tripod workflows with Wooden Camera ARCA accessories.Top Plate SystemTo enhance the capabilities of the camera, a Top Plate emphasizing air flow and connectivity is secured to the top of the camera via three ¼”-20 screws along the camera's center mounting points. In addition, a removable 15mm Dual rod clamp allows users to connect items like the Blackmagic EVF or additional 3rd party accessories. The design includes a removable rear extension for additional connecting points to the top plate. This Top Plate is compatible with the stock Blackmagic URSA handle.Ultra HandleThis system also includes an Ultra Handle that allows users to securely hold on to your camera and adds mounting options for additional accessories.Included ItemsRiser Plate for Blackmagic URSA Cine 12K/17KTop Plate for Blackmagic URSA Cine 12K/17KTop Plate Extension Block for Blackmagic URSA Cine 12K/17KUltra Handle (3/8"-16) Standard KitTop Plate Dual Rod Clamp - FrontARCA Base PlateSpecificationsWeight: 1579 gDimensions: 161 x 135 x 96 mm