Wooden Camera Base Plate System for FUJIFILM GFX ETERNA 55

Wooden Camera Side Rail Kit for FUJIFILM GFX ETERNA 55SKU: 50-K10004Our Side Rail Kit attaches securely to both the Side and Rear Top Plate as well as the Riser Plate. It creates a secure camera base with extra mounting points on the sides allowing users to customize their camera setup with accessories. The rail incorporates enhanced safety features to protect both accessories and the camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory.Additionally, blind holes are strategically placed to prevent accidental damage to your camera body during installation or use with 1/4”-20 or 3/8”-16 mounted accessories. These Side Rails incorporate a Wooden Camera patented line of products, featuring their innovative dual safety NATO design for added security and peace of mind.SpecificationsWeight: 150.6 gDimensions: 158.7 x 57 x 27.4 mmIncludesA00914 Side Rail for FUJIFILM GFX ETERNA 55 2x

Wooden Camera Riser Plate for FUJIFILM GFX ETERNA 55SKU: A00901The Riser Plate features integrated ARCA rails, enabling quick transitions between bridge plates, Shoulder, and Steadicam setups that utilize our ARCA plates.Two front-facing 15mm LWS Rod Mounts allow for connecting lens motors and other accessories. Individual tie-down points for rods ensure a secure connection and prevent rod rotation. Note: The rod pass-through feature has been removed due to camera dimensions and optical center requirements.The plate attaches to the camera body via two 3/8”-16 screws, setting it at its optical center for bridge plates and proper alignment of lens accessories. Raised edges on the plate conform to the camera, and pins near the tie-in points prevent rotation. This plate also provides access to the front-facing knob and switch on the camera.In addition, a rear 1/4”-20 screw mounting point is designed to secure our D-Box™ for FUJIFILM GFX ETERNA 55 to the Riser using our D-Box Support Bracket, preventing accidental discharge of the D-Box from the camera’s V-Mount during operation.Weight: 355.2 gDimensions: 192 x 127.2 x 17 mm

Wooden Camera Rear Side Rail for FUJIFILM GFX ETERNA 55SKU: A00907This Rear Side Rail attaches directly to the rear mounting points on the camera body after the camera's connector protection bracket is removed. Its four mounting points provide a secure connection to the camera body and protect the camera's ports. This rail incorporates 3/8"-16 and 1/4"-20 mounting points, as well as a NATO rail along the length, allowing for a wide range of accessories to be attached.The NATO Rail provides enhanced safety features to protect both accessories and the camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory. Through holes were designed to reduce weight and allow screw-in accessories, without causing damage to the camera body. This Rear Side Rail incorporates a Wooden Camera patented line of products, featuring our innovative dual safety NATO design for added security and peace of mind.SpecificationsWeight: 53.52 gDimensions: 123.7 x 31.9 x 29.8 mm

Wooden Camera Side Rail for FUJIFILM GFX ETERNA 55SKU: A00914The Side Rail is a versatile mounting solution for camera accessories. It attaches securely to both the top and riser plate using 1/4”-20 screws, which can be tightened with a 3/16” hex tool. This rail provides multiple mounting points for your accessories, including both 1/4”-20 and 3/8”-16 threaded holes, ensuring compatibility with a wide range of NATO-compatible accessories. Its symmetrical design allows for use on either the left or right side of your camera setup, providing flexibility in your rig configuration.The NATO Rail incorporates enhanced safety features to protect both your accessories and your camera. Updated safety pins simplify the attachment and removal of NATO accessories – simply press down on the pin to release the accessory. Additionally, blind holes prevent accidental damage to your camera body during installation or use. This Side Rail incorporates a Wooden Camera patented line of products, featuring their innovative dual safety NATO design for added security and peace of mind. SpecificationsWeight: 75.3 gDimensions: 158.7 x 28.5 x 27.4 mm

Wooden Camera Rear Top Plate Extension for FUJIFILM GFX ETERNA 55SKU: A00971The Rear Top Plate Extension is a versatile accessory that offers secure mounting, EVF access, and multiple mounting points. Using a single 3/8”-16 screw, this plate attaches to the camera body and top plate extensions.The Wooden Camera Rear Top Plate Extension can be used with the Front Plate, Side Plate, or Power Strip. Please Note: The Front Plate Extension and Power Strip or Side Plate Extension are required for stability. This item does not work properly on the camera alone.SpecificationsWeight: 129.7 gDimensions: 124.9 x 77 x 18.8 mm

Wooden Camera Side Top Plate Extension for FUJIFILM GFX ETERNA 55SKU: A00969The Side Top Plate Extension mounts to the top of the camera via two 3/8”-16 screws, providing a secure base for additional accessories without covering the camera’s top dovetail. The Side Plate adds 1/4”-20 and 3/8”-16 mounting points along the top of the camera and a forward-facing mounting point that can be used with accessories like the Bolt-On Rods or the Dual Rod Clamp.Etching near the forward screw indicates the camera's film plane. While the Side Plate is installed, users can use the native top handle by sliding it along its channel on the camera, even with the plate installed. Blind holes are incorporated to prevent damage to the camera.This item is also compatible with the Rear and Front Top Plates for the FUJIFILM GFX ETERNA 55.SpecificationsWeight: 106.6 gDimensions: 152.7 x 32.5 x 18.8 mm

Wooden Camera Front Top Plate Extension for FUJIFILM GFX ETERNA 55SKU: A00970The Front Top Plate Extension was designed for users who solely need the Power Strip functionality. It provides a forward-facing 3/8”-16 mounting point and allows the use of the Native Top Handle, while adding mounting points on the camera.This extension securely connects to the Side Plate or Power Strip. The design features etchings indicating the camera's film plane and a single tie-down point for securing it to the camera. This accessory also includes side mounting points for attaching additional accessories, like a Side Rail, and blind holes to prevent damage to the camera.This item is also compatible with the Rear and Side Plates for the FUJIFILM GFX ETERNA 55. Consider adding a Side or Rear Extension for increased stability. Please note: The Power Strip or Side Plate Extension is required for stability. This item does not work properly on the camera alone.SpecificationsWeight: 58.06 gDimensions: 76.8 x 41.1 x 14.5 mm