TVLogic F-10H 10” FHD High Brightness Field Monitor

TVLogic F-7HS Introducing the TVLogic F-7HS 7-inch LCD Field Monitor - the ultimate tool for professional videographers and filmmakers. With its high luminance display and advanced features, this monitor is designed to elevate your production to the next level. The TVLogic F-7HS boasts a stunning 7-inch LCD screen, providing a large and clear viewing area for precise monitoring on set. Its high luminance of 1500cd/m2 ensures exceptional brightness and contrast, even in the brightest outdoor environments. This makes it the perfect companion for outdoor shoots, where traditional monitors may struggle to provide accurate visuals. Equipped with advanced LCD technology, the F-7HS delivers true-to-life colors and sharp images, allowing you to see every detail with incredible clarity.The monitor also features a wide viewing angle of 178 degrees, ensuring that your entire crew can easily view the screen without any distortion. Designed specifically for field use, the F-7HS is built to withstand the rigors of production. Its rugged and durable construction can withstand bumps, drops, and other on-set hazards, making it a reliable and long-lasting investment for your equipment arsenal. But the TVLogic F-7HS is not just about its impressive display. It also comes packed with advanced features to enhance your workflow. With its waveform, vectorscope, and histogram display, you can accurately monitor your footage and make adjustments on the spot. Resolution (1920 x 1080) Luminance up to 1,500nits HDMI ↔ SDI Cross Conversion HDR Emulation (PQ, HLG, S-Log3) Custom 3D LUT Import by USB Flash Drive Various Built-in Camera LUTs ARRI Metadata Excellent Sharpness Peaking Boost Waveform / Vectorscope

TVLogic F-5A The TVLogic F-5A is a compact and light-weight field production monitor with Full HD resolution of 1920 x 1080, nice viewing angle and max luminance of 500nit. F-5A is equipped with a new image processing engine and reproduces even better sharpness and peaking boost capability for focus pullers. It also supports various video formats via 3G-SDI and HDMI 1.3 interface. And also support professional features such as Waveform/Vectorscope, Focus Assist, 3D LUT import, Camera Logs and HDR emulation Audio Level Meter Display Displays the level of the embedded sound signal together with the video signal input through the terminal such as SDI or HDMI. Blue Only / Mono Red and Green channels are not used and only Blue or Monochrome channel is used to display the screen. This function is used to adjust the color tones (tones and saturation) of the screen using the SMPTE Color Bar. For example, after displaying the Blue channel, adjust the Color (or Saturation) and Tint (or Hue) so that the original Magenta and Cyan are of the same brightness, and the original Gray and Blue are of the same brightness. Focus Assist Assigns a color to the pixels on the boundaries of the image to inform the user to achieve the best focus. With this function, user can easily differentiate the focused area from out-focused area especially when shooting with a shallow depth of field. H/V Delay Allows you to check the Blanking area and synchronize signals by displaying the horizontal and vertical intervals in the center of the screen. H/V Flip Allows the displayed image to be flipped horizontally or vertically. This feature provides flexible mounting options for camera operators. Key Lock Locks the knob or key control. Luma(Y') Zone Check Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen. Marker Displays various kinds of aspect ratios on the screen. Wide range of markers and security areas are available with line color and curtain transparency selection. A User Marker is available if any of standard markers fits your requirements. Max Brightness On/Off Displays the brightness increases from the normal up to max brightness to obtain a sharp and bright image when shooting outdoors. Range Error Anahlyzes the input signal’s Luma(Y’) and chroma information(C’) and if the input signal exceeds the designated minimum value and maximum value, the pixel shall blink. This function is to help the user to easily find out any unwanted levels of signals and for a better exposure setting. Time Code Display Displays the Timecode information on the screen. User Aspect Adjusts the Width /Height display ratio. Various Scan Modes Controls the size of the image. Overscan: Extra area around the four edges of the image that may not be seen reliably by the viewer. Underscan: Constrains the size of the image so the monitor shows everything the camera is seeing. 1:1 pixel: Displays the original image resolution without scaling to match a certain resolution or an aspect ratio. Waveform/Vector Scope Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform. Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis. Zoom Magnifies the input signal from 0% to 90%. Camera Lut. Applies the LUTs to the outbound Log signal. A LUT for every major camera manufacturer has been included(LOG-C, C-LOG, S-LOG 1,2,3 and RED Gamma 3,4). ARRI Alexa Metadata over SDI Takes the Metadata from the ARRI ALEXA is transported through the SDI outputs of the camera, and displays it on the monitor. Split Zoom Zooms the specified area sequentially. Anamorphic Desqueeze Supports several formats and resolutions that are ideally suited for anamorphic lenses and aspect ratios. When shooting anamorphic the image you are monitoring is an “unsqueezed” preview of what’s actually being recorded. Sleep Mode Sets the LUMINANCE to the minimum value when the time set in the still image output is exceeded.

TVLogic F-10A The F-10A is the new 10" field monitor with HDR capability and Full HD resolution. Designed for versatile field production applications, the TVLogic F-10A offers nearly half the weight and slimmer design compared to its class size. It also supports HDMI 2.0 and HDCP 2.2 to support 4K HDR 60Hz and supports various video signals (3G HD/SD-SDI, HDMI). In addition, it provides various professional functions such as HDMI-SDI conversion output, Camera LUTs, Arri Metadata Display, Waveform/Vectorscope, H/V Flip, Auto Flip, Scan and Image Overlay. HDR Emulation A true HDR monitor must employ a special display panel with high dynamic range and a wide color gamut, along with being calibrated for PQ and HLG. For example, the LUM-310X (dual layer LCD system) and LUM-310R (LCD with local dimming backlight system) are capable of reproducing a peak luminance of 1,000 nit and 2,000 nit respectively, and a contrast ratio of 1,000,000 : 1; in addition, they cover 99% of the DCI color gamut. 1:1 Pixel Mapping Modes for SD/HD Displays the original image resolution without scaling to match a certain resolution or an aspect ratio. Anamorphic Desqueeze Supports several formats and resolutions that are ideally suited for anamorphic lenses and aspect ratios. When shooting anamorphic the image you are monitoring is an “unsqueezed” preview of what’s actually being recorded. ARRI Alexa Camera Metadata over SDI Takes the Metadata from the ARRI ALEXA is transported through the SDI outputs of the camera, and displays it on the monitor. Camera Lut. Applies the LUTs to the outbound Log signal. A LUT for every major camera manufacturer has been included(LOG-C, C-LOG, S-LOG 1,2,3 and RED Gamma 3,4). H/V Flip Allows the displayed image to be flipped horizontally or vertically. This feature provides flexible mounting options for camera operators. Luma(Y') Zone Check Displays the Luma(Y’) level of the input image in colors. Each pixel’s Y’ analyzed and changed to a certain color or zebra pattern according to the Index on the right side of the screen. Split Zoom Zooms the specified area sequentially. Waveform/Vector Scope Waveform Y: Displays the Luma(Y’), Cb, Cr component of the input signal into waveform. Vector Scope: Displays the color components ‘B-Y’ and ‘R-Y’of the input signals onto the X-Y axis. Zoom Magnifies the input signal from 0% to 90%.