8Sinn 15mm Rod Clamp with Arri RosettesSKU: 8-15RC-ARV2A simple and solid adapter for advanced shoulder rigs. The rod clamp provides you with the attachment point for shoulder rig side arms. The adapter's adjustment range is limited only to the length of rods you choose.The clamp can be dismounted in seconds thanks to the quick-release system, tightened with only one thumbscrew. No tools needed. The locking mechanism has been made from stainless steel to limit the wear off and to improve its tightening capacity. The position of the side arms mounted on the rod clamp can be easily adjusted along the length of your chosen rods. Altering the position occurs with the use of only one thumb screw, which tightens both 15mm rails at once.
FeaturesResistance to mechanical damage and surface abrasionThe main body is made with 100% aluminum to guarantee minimum load on your rigEasy adjusment to your needs
8Sinn 15mm Rod Mount BridgeSKU: 8-15RMB
Aluminum bridge mounted on 15mm rods serves as a mounting adapter for 8Sinn Shoulder Support. Standard spacing of rod openings allows the user to apply the presented adapter on any baseplate.Dimensions: Length: 82mm (107mm w/ thumbscrews), Height: 25mm, Width: 20mmWeight: 51gSet includes: 1pc 8Sinn 15mm Rod Mount Bridge
Features15mm rod compatible6 x 1/4" threaded mounting pointsAluminum made60mm center-to-center distanceThumb screw on each side
MID49 Canon C50 15mm Rod ClampSKU: M49-SRC-C50Canon C50 15mm Rod Clamp attaches to the two M4 holes on the front of the handle where the microphone shockmount would normally be installed. M4 holes are available to stack the Canon shockmount on top of the bracket. M4x20 ARRI MAP holes and an ARRI 1/4-20 are also available for additional mounting.Works great to mount the optional TWIST EVF System or 15mm Accessory Rod, sold separately.
MID49 Canon Rod Clamp and TWIST Mount Kit for C400, C300mkIII, C500mkII, LM-V2SKU: M49-EVF-KIT-CAN-RCCanon Rod Clamp and TWIST Mount Kit for C400, C300mkIII, C500mkII, LM-V2 combines the Canon 1/4-20 Striped Rosette 15mm Rod Clamp and TWIST Mount EVF Kit for Canon C300mkIII, C500mkII, LM-V2.The kit attaches to the side of the Canon C400 monitor or LM-V2 monitor and to the 1/4-20 striped rosette found on the Canon handle and bodies of C400, C300mkIII, C500mkII, and several other cameras. The double sided NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew.
MID49 LW 15mm Rod Bracket (FUJIFILM GFX ETERNA)SKU: M49-ROD-BRK-FUJELW 15mm Rod Bracket (FUJIFILM GFX ETERNA) attaches to the front of the Baseline Core 15mm LW (FUJIFILM GFX ETERNA) by two 1/4-20 screws and locating pins to provide 15mm rod clamps at the correct distance from the center of the lens. The center of the LW 15mm Bracket has a 1/4-20 vertical support post, which can be used to support lens adapters like Metabones, etc.
MID49 Multi-Function Rod Bracket (MFRB 15mm LW)
SKU: M49-ROD-BRK-MF15LWMulti-Function Rod Bracket (MFRB 15mm LW) attaches to M4x20mm holes, like those found on the Rainbow Handle and the ARCA Top Handle. Lightweight spaced 15mm rod openings run front to back and a sideways 15mm rod opening allows users to attach viewfinder mounts or microphone shockmounts.
MID49 Rod Bracket (15mm LW)
SKU: M49-ROD-BRK-15LW
Rod Bracket (15mm LW) holds two 15mm rods at 60mm lightweight spacing and attaches by two 1/4-20 screws 18mm apart to the back of Baseline 15mm LW baseplates to add rear rod support.
M4 screws 20mm apart can be used instead to attach to products like ARCA Top Handle and ARCA Top Plate (114mm) or other devices with standard ARRI standard M4 spacing.
M4x20mm threaded holes are available on top for adding additional accessories.
MID49 Single 15mm Rod Clamp (M4 x 20mm)
SKU: M49-SRC-15
Single 15mm Rod Clamp (M4 x 20mm) attaches by two M4 screws spaced 20mm apart, center to center, and is great for attaching lens motors in a compact configuration. M4x20mm holes are found on MID49 cheeseplates, handles, audio breakouts, EXT breakouts, and rod clamps, as well as ARRI and many third-party accessories.
Weight: 34gDimensions: 28 x 42 x 31mm
MID49 Single 19mm Rod Clamp (M4 x 20mm)
SKU: M49-SRC-19
Single 19mm Rod Clamp (M4 x 20mm) attaches by two M4 screws spaced 20mm apart, center to center, and is great for attaching lens motors in a compact configuration. M4x20mm holes are found on MID49 cheeseplates, handles, audio breakouts, EXT breakouts, and rod clamps, as well as ARRI and many third-party accessories.
Weight: 34gDimensions: 28 x 42 x 31mm
MID49 Top 15mm Rod Bracket (Sony Burano, Canon C400, Blackmagic PYXIS / URSA Cine LF)SKU: M49-TOP-ROD-15LWTop 15mm Rod Bracket (Sony Burano, Canon C400, Blackmagic PYXIS / URSA Cine LF) attaches to the front of the Top Plates for the listed cameras and holds two 15mm LW rods for adding focus motors, viewfinder mounts, and other accessories over the lens area.
Rods pass over the Top Plate and around the ARCA Top Handle and Rainbow Handle while still allowing access for carrying.
Great for leaving rod accessories installed when switching to gimbal mode using adapters like Gimbal Top ARCA Adapter (DJI Ronin 2) or (Freefly Mōvi Pro) or the ARCA Top Plate.Compatible Top PlatesTop Plate (Canon C400)Top Plate (Sony Burano)Top Plate (Blackmagic PYXIS)Top Plate (Blackmagic URSA Cine LF)
Shape RODSUP3 double sliding rod bloc
SKU: RODSUP3
The SHAPE DOUBLE SLIDING ROD BLOC hosts two sets of standard 15mm rods on the same rod bloc. It is very useful for attaching accessories such as a SHAPE FOLLOW FOCUS FRICTION & GEAR CLIC, a matte box, etc. The SHAPE DOUBLE SLIDING ROD BLOC enables vertical positioning of 15mm rods using a 4mm Allen key. To secure the position of the SHAPE DOUBLE SLIDING ROD BLOCK along the rods, simply tighten the single red knob. Made of lightweight anodized aluminum for strength and durability, the SHAPE DOUBLE SLIDING ROD BLOC is compatible with all 15mm rod systems.
Vocas 15 mm Clamping block
SKU: 0350-2010
Vocas 15 mm Clamping block is a holder for 15 mm rails, can be used on for example the USBP supports to mount rear 15 mm rails.
Vocas 15 mm Height adjustable bars adapter
SKU: 0360-0100
Vocas Height adjustable bars adapter for MB-2XX and MB-3XX. This adapter can be adjusted to be 2,5mm shorter and 16mm taller in relation to the standard height of this bracket. (85mm from the centre of the lens to the centre of the 15mm rails)
Vocas 15 mm single rod holder
SKU: 0350-1465
This accessory attaches to the front of the H-cheese plate (0350-1365) and allows the use of a 15 mm style viewfinder bracket.
Vocas 19 mm Dividable clamping block
SKU: 0450-2010
Two for the price of one! This new Vocas 19 mm Dividable clamping block can be divided in two pieces of single 19 mm rails holders. This way one 19 mm rail can be used that is supported on both sides in order to mount, for example, lens motors at the top of your set-up.
The 19 mm dividable clamping can be used as a double 19 mm rails holder as well.
Vocas RED 15 mm rail support / BP-18 adapter
SKU: 0350-0017
This 15 mm rail support is especially designed for the RED DSMC and RED V-RAPTOR XL cameras. This light weight rail support allows the use of 15 mm accessories on the RED cameras. Besides, this 15 mm rail support can be used as spacer to mount the BP-18 (0480-0018) to provide your RED camera with a 19 mm rail support system.
Rosette: NoneBars position: FrontBars system: 15 mmPackage included: 0350-9160 15 mm bar (2x)Material: AluminumColor: BlackWeight: 168 gr
Vocas VF holder for 15 mm LWS top railsSKU: 0350-1495This Vocas VF holder for 15 mm LWS top rails can be used on any 15 mm Light Weight Standard rails offering the user a possibility to add one right-angle 15 mm rail. Mostly used on top rails for viewfinder brackets.
Wooden Camera 15mm Rod Clamp to ARRI Rosette
SKU: 220000
15mm Rod Clamp to ARRI Rosette allows you to attach a single ARRI standard handgrip to a 15mm rod. This is ideal for creating a compact configuration with one of our Wooden Camera Handgrips, Rosette Handle (Brown Leather), (Black Leather), and (Rubber). Third party ARRI handgrips will also work.Includes Ratcheting M4 thumbscrewInludes Threaded M6 ARRI rosette
Weight 136 gDimensions 50.8 mm x 76.2 mm x 50.8 mm
Wooden Camera 15mm Tube Clamp
SKU: 160700
15mm Tube Clamp for the UVF Mount v2 and UVF Mount. Slotted screw pattern allows attaching to holes between 25mm and 36mm apart center to center.
Wooden Camera 19mm Rod Clamp to ARRI Rosette
SKU: 220100
19mm Rod Clamp to ARRI Rosette allows you to attach a single ARRI standard handgrip to a 19mm rod.
This is ideal for creating a compact configuration with one of our Wooden Camera Handgrips, Rosette Handle (Brown Leather), (Black Leather), and (Rubber). Third party ARRI handgrips will also work.
Includes Ratcheting M4 thumbscrewIncludes Threaded M6 ARRI rosette
Weight 136 gDimensions 50.8 mm x 76.2 mm x 50.8 mm
Wooden Camera Battery Swing
SKU: 245700
Wooden Camera Battery Swing provides standard V-Mount and Gold Mount hole patterns for mounting WC battery plates and the D-Box (Alexa Mini). Quickly access the back of the camera by pulling the black pin and swinging open. Mounting bracket has integrated 15mm rod openings and is most commonly used in the lower position for bottom rods. Battery Swing can be mounted to top rods by moving the swing arm to the top row of holes on the battery bracket.
Weight: 226.80gDimensions: 152.4 x 114.3 x 45.7 mm
Includes
4 x M3 x 12mm Pan Head Screws 4 x M3 x 8mm Pan Head Screws 4 x M3 x 8mm Phillips Flat Head Screws (for attaching D-Box if original screws were lost)
Wooden Camera Bolt On 19mm Rod
SKU: 144900
19mm Rod for bolting onto any 1/4-20 mounting point. Great for mounting 19mm accessories to cheeseplates. Rod length is 38mm.
Includes 1 x 1/4-20 x 3/8" screwWeight 45 gDimensions 3.81 cm x 2.03 cm x 1.52 cm
Wooden Camera Front Rod Bracket for ALEXA 35 (CCH-5)
SKU: A00377
A 15mm Dual Front Rod Bracket that allows users to attach the ARRI CCH-5 handle to the Wooden Camera Top Plate.
Weight: 68 gDimensions: 30 x 117 x 31 mm
€159.00*
gross: €189.21
Pay with:
We ship with:
Fast shipping
Buy VAT exempt with your valid VAT EU ID
B2B Shop - Only for commercial / professional customers
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Machine identifier:
Security token to identify the machine.
Stripe orig props:
Stripe referrer information.
Private machine identifier cookie:
Security token to identify the private machine.
Site auth:
Stripe authentication cookie.
Stripe csrf:
CSRF token.
Stripe payment method:
Stripe payment method
Google Pay payments
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Stripe:
The cookie is used by the payment provider to increase security when processing payments on the website.
Amazon Pay
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
PayPal payments
CAPTCHA integration
Timezone:
The cookie is used to provide the system with the user's current time zone.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Amazon Pay:
The cookie is used for payment transactions via Amazon.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Tracking cookies help the shop operator to collect and evaluate information about the behaviour of users on their website.
Google Analytics:
Google Analytics is used for traffic analysis of the website. Thereby statistics about website activities can be created and read out.
Google Analytics:
Cookie from Google for website analysis. Generates statistical data about how the visitor uses the website.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google conversion tracking:
The Google Conversion Tracking Cookie is used to track conversions on the website effectively. This information is used by the site operator to target Google AdWords campaigns.
Cookies used for statistics and shop performance metrics.
Google Analytics
Google Tag Manager:
Cookie from Google to control the advanced script and event handling.
Marketing cookies are used by third-party vendors or publishers to display personalized advertisements. They do this by tracking visitors across websites.
Google Ads:
Dieses Cookie wird gesetzt, wenn ein User über einen Klick auf eine Google Werbeanzeige auf die Website gelangt. Es enthält Informationen darüber, welche Werbeanzeige geklickt wurde, sodass erzielte Erfolge wie z.B. Bestellungen oder Kontaktanfragen der Anzeige zugewiesen werden können.
Google Ads:
Advertising Targeting
Google AdSense:
The cookie is used by Google AdSense to promote advertising efficiency on the website.
Bing Ads:
This cookie is used by Bing to gather anonymous information on how visitors are using the website.
YouTube video
Wishlist
Local Storage:
Stores a timestamp to hide elements for a certain time if desired.
Service cookies are used to provide the user with additional offers (e.g. live chats) on the website. Information obtained via these service cookies may also be processed for site analysis.
Doofinder:
The cookie is used to track user interaction with the site search. The data can be used to optimize the search function.
Shopware Analytics is an analytics service for tracking shopping behavior on this webshop, provided by shopware AG (Ebbinghoff 10, 48624 Schöppingen, Germany) in joint responsibility (see also the data protection information). The legal basis for data processing is Art. 6 para. 1 s. 1 lit. a GDPR. If data is stored locally, please refer to our privacy policy for further details on data processing.
The recipient of the data is shopware AG and IT service providers. Technologies used include local storage. The collected data includes customer group, pages visited, click paths, date and time of visit, information about the end device used (resolution, resolution density, operating system), referrer URL, information about the browser used, locale, search queries, time zone. The purpose of data collection is for marketing, analysis, and statistical purposes.
Data processing takes place within the European Union. If you have any questions about data protection, you can contact the data protection officer at legal@shopware.com. Further information can be found at https://www.shopware.com/en/privacy/website.
Stored data:
Shopware Analytics adds the following information to your browser's local storage until consent is revoked: _swa_anonymousId (a unique identifier of the visitor), _swa_userTraits (user traits of the visitor).
Allows Google to collect personal data for online advertising and marketing.
Google Advertising
Meta Pixel:
Cookie from Meta that is used for website analytics, ad targeting and ad measurement.
Microsoft Ads:
Cookie from Microsoft Ads that is used for website analytics, ad targeting and ad measurement.
Pinterest Ads:
Cookie from Pinterest Ads that is used for website analytics, ad targeting and ad measurement.
TikTok Ads:
Cookie from TikTok Ads that is used for website analytics, ad targeting and ad measurement.
Sendinblue:
Sendinblue tracker
We respect your privacy
This website uses cookies to ensure you get the best experience on our website... More information.
