8Sinn 15mm Rod Clamp with Arri RosettesSKU: 8-15RC-ARV2A simple and solid adapter for advanced shoulder rigs. The rod clamp provides you with the attachment point for shoulder rig side arms. The adapter's adjustment range is limited only to the length of rods you choose.The clamp can be dismounted in seconds thanks to the quick-release system, tightened with only one thumbscrew. No tools needed. The locking mechanism has been made from stainless steel to limit the wear off and to improve its tightening capacity. The position of the side arms mounted on the rod clamp can be easily adjusted along the length of your chosen rods. Altering the position occurs with the use of only one thumb screw, which tightens both 15mm rails at once. FeaturesResistance to mechanical damage and surface abrasionThe main body is made with 100% aluminum to guarantee minimum load on your rigEasy adjusment to your needs
8Sinn 15mm Rod Mount BridgeSKU: 8-15RMB Aluminum bridge mounted on 15mm rods serves as a mounting adapter for 8Sinn Shoulder Support. Standard spacing of rod openings allows the user to apply the presented adapter on any baseplate.Dimensions: Length: 82mm (107mm w/ thumbscrews), Height: 25mm, Width: 20mmWeight: 51gSet includes: 1pc 8Sinn 15mm Rod Mount Bridge Features15mm rod compatible6 x 1/4" threaded mounting pointsAluminum made60mm center-to-center distanceThumb screw on each side
Chrosziel Adapter 15:19mm for Bridgeplate Product code: 401-10 Adaptor 15mm to Bridgeplate with Ø19mm rods (for use with e.g. StudioRig / Projector)
MID49 Canon 1/4-20 Striped Rosette 15mm Rod ClampSKU: M49-SRC-CANCanon 1/4-20 Striped Rosette 15mm Rod Clamp attaches to the Canon 1/4-20 striped rosette found on the Canon C80, C400, C300mkIII, C500mkII, and many other cameras. Cross-cut teeth allows the Rod Clamp to be positioned sideways across the body for attaching accessories like the TWIST Mount EVF System or it can be positioned over the lens to hold a single 15mm rod for lens motors.Weight: 28gDimensions (WxLxH): 24 x 38 x 37mm
MID49 Canon C50 15mm Rod ClampSKU: M49-SRC-C50Canon C50 15mm Rod Clamp attaches to the two M4 holes on the front of the handle where the microphone shockmount would normally be installed. M4 holes are available to stack the Canon shockmount on top of the bracket. M4x20 ARRI MAP holes and an ARRI 1/4-20 are also available for additional mounting.Works great to mount the optional TWIST EVF System or 15mm Accessory Rod, sold separately.
MID49 Canon Rod Clamp and TWIST Mount Kit for C400, C300mkIII, C500mkII, LM-V2SKU: M49-EVF-KIT-CAN-RCCanon Rod Clamp and TWIST Mount Kit for C400, C300mkIII, C500mkII, LM-V2 combines the Canon 1/4-20 Striped Rosette 15mm Rod Clamp and TWIST Mount EVF Kit for Canon C300mkIII, C500mkII, LM-V2.The kit attaches to the side of the Canon C400 monitor or LM-V2 monitor and to the 1/4-20 striped rosette found on the Canon handle and bodies of C400, C300mkIII, C500mkII, and several other cameras. The double sided NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew.
MID49 LW 15mm Rod Bracket (FUJIFILM GFX ETERNA)SKU: M49-ROD-BRK-FUJELW 15mm Rod Bracket (FUJIFILM GFX ETERNA) attaches to the front of the Baseline Core 15mm LW (FUJIFILM GFX ETERNA) by two 1/4-20 screws and locating pins to provide 15mm rod clamps at the correct distance from the center of the lens. The center of the LW 15mm Bracket has a 1/4-20 vertical support post, which can be used to support lens adapters like Metabones, etc.
MID49 Multi-Function Rod Bracket (MFRB 15mm LW) SKU: M49-ROD-BRK-MF15LWMulti-Function Rod Bracket (MFRB 15mm LW) attaches to M4x20mm holes, like those found on the Rainbow Handle and the ARCA Top Handle. Lightweight spaced 15mm rod openings run front to back and a sideways 15mm rod opening allows users to attach viewfinder mounts or microphone shockmounts.
MID49 Rod Bracket (15mm LW) SKU: M49-ROD-BRK-15LW Rod Bracket (15mm LW) holds two 15mm rods at 60mm lightweight spacing and attaches by two 1/4-20 screws 18mm apart to the back of Baseline 15mm LW baseplates to add rear rod support. M4 screws 20mm apart can be used instead to attach to products like ARCA Top Handle and ARCA Top Plate (114mm) or other devices with standard ARRI standard M4 spacing. M4x20mm threaded holes are available on top for adding additional accessories.
MID49 Single 15mm Rod Clamp (M4 x 20mm) SKU: M49-SRC-15 Single 15mm Rod Clamp (M4 x 20mm) attaches by two M4 screws spaced 20mm apart, center to center, and is great for attaching lens motors in a compact configuration. M4x20mm holes are found on MID49 cheeseplates, handles, audio breakouts, EXT breakouts, and rod clamps, as well as ARRI and many third-party accessories. Weight: 34gDimensions: 28 x 42 x 31mm
MID49 Single 19mm Rod Clamp (M4 x 20mm) SKU: M49-SRC-19 Single 19mm Rod Clamp (M4 x 20mm) attaches by two M4 screws spaced 20mm apart, center to center, and is great for attaching lens motors in a compact configuration. M4x20mm holes are found on MID49 cheeseplates, handles, audio breakouts, EXT breakouts, and rod clamps, as well as ARRI and many third-party accessories. Weight: 34gDimensions: 28 x 42 x 31mm
MID49 Top 15mm Rod Bracket (Sony Burano, Canon C400, Blackmagic PYXIS / URSA Cine LF)SKU: M49-TOP-ROD-15LWTop 15mm Rod Bracket (Sony Burano, Canon C400, Blackmagic PYXIS / URSA Cine LF) attaches to the front of the Top Plates for the listed cameras and holds two 15mm LW rods for adding focus motors, viewfinder mounts, and other accessories over the lens area. Rods pass over the Top Plate and around the ARCA Top Handle and Rainbow Handle while still allowing access for carrying. Great for leaving rod accessories installed when switching to gimbal mode using adapters like Gimbal Top ARCA Adapter (DJI Ronin 2) or (Freefly Mōvi Pro) or the ARCA Top Plate.Compatible Top PlatesTop Plate (Canon C400)Top Plate (Sony Burano)Top Plate (Blackmagic PYXIS)Top Plate (Blackmagic URSA Cine LF)
Shape RODSUP3 double sliding rod bloc SKU: RODSUP3 The SHAPE DOUBLE SLIDING ROD BLOC hosts two sets of standard 15mm rods on the same rod bloc. It is very useful for attaching accessories such as a SHAPE FOLLOW FOCUS FRICTION & GEAR CLIC, a matte box, etc. The SHAPE DOUBLE SLIDING ROD BLOC enables vertical positioning of 15mm rods using a 4mm Allen key. To secure the position of the SHAPE DOUBLE SLIDING ROD BLOCK along the rods, simply tighten the single red knob. Made of lightweight anodized aluminum for strength and durability, the SHAPE DOUBLE SLIDING ROD BLOC is compatible with all 15mm rod systems.
Vocas 15 mm Clamping block SKU: 0350-2010 Vocas 15 mm Clamping block is a holder for 15 mm rails, can be used on for example the USBP supports to mount rear 15 mm rails.
Vocas 15 mm Height adjustable bars adapter SKU: 0360-0100 Vocas Height adjustable bars adapter for MB-2XX and MB-3XX. This adapter can be adjusted to be 2,5mm shorter and 16mm taller in relation to the standard height of this bracket. (85mm from the centre of the lens to the centre of the 15mm rails)
Vocas 15 mm single rod holder SKU: 0350-1465 This accessory attaches to the front of the H-cheese plate (0350-1365) and allows the use of a 15 mm style viewfinder bracket.
Vocas 19 mm Dividable clamping block SKU: 0450-2010 Two for the price of one! This new Vocas 19 mm Dividable clamping block can be divided in two pieces of single 19 mm rails holders. This way one 19 mm rail can be used that is supported on both sides in order to mount, for example, lens motors at the top of your set-up. The 19 mm dividable clamping can be used as a double 19 mm rails holder as well.
Vocas RED 15 mm rail support / BP-18 adapter SKU: 0350-0017 This 15 mm rail support is especially designed for the RED DSMC and RED V-RAPTOR XL cameras. This light weight rail support allows the use of 15 mm accessories on the RED cameras. Besides, this 15 mm rail support can be used as spacer to mount the BP-18 (0480-0018) to provide your RED camera with a 19 mm rail support system. Rosette: NoneBars position: FrontBars system: 15 mmPackage included: 0350-9160 15 mm bar (2x)Material: AluminumColor: BlackWeight: 168 gr
Vocas VF holder for 15 mm LWS top railsSKU: 0350-1495This Vocas VF holder for 15 mm LWS top rails can be used on any 15 mm Light Weight Standard rails offering the user a possibility to add one right-angle 15 mm rail. Mostly used on top rails for viewfinder brackets.
Wooden Camera 15mm Rod Clamp to ARRI Rosette SKU: 220000 15mm Rod Clamp to ARRI Rosette allows you to attach a single ARRI standard handgrip to a 15mm rod. This is ideal for creating a compact configuration with one of our Wooden Camera Handgrips, Rosette Handle (Brown Leather), (Black Leather), and (Rubber). Third party ARRI handgrips will also work.Includes Ratcheting M4 thumbscrewInludes Threaded M6 ARRI rosette Weight 136 gDimensions 50.8 mm x 76.2 mm x 50.8 mm
Wooden Camera 15mm Tube Clamp SKU: 160700 15mm Tube Clamp for the UVF Mount v2 and UVF Mount. Slotted screw pattern allows attaching to holes between 25mm and 36mm apart center to center.
Wooden Camera 19mm Rod Clamp to ARRI Rosette SKU: 220100 19mm Rod Clamp to ARRI Rosette allows you to attach a single ARRI standard handgrip to a 19mm rod. This is ideal for creating a compact configuration with one of our Wooden Camera Handgrips, Rosette Handle (Brown Leather), (Black Leather), and (Rubber). Third party ARRI handgrips will also work. Includes Ratcheting M4 thumbscrewIncludes Threaded M6 ARRI rosette Weight 136 gDimensions 50.8 mm x 76.2 mm x 50.8 mm
Wooden Camera Battery Swing SKU: 245700 Wooden Camera Battery Swing provides standard V-Mount and Gold Mount hole patterns for mounting WC battery plates and the D-Box (Alexa Mini). Quickly access the back of the camera by pulling the black pin and swinging open. Mounting bracket has integrated 15mm rod openings and is most commonly used in the lower position for bottom rods. Battery Swing can be mounted to top rods by moving the swing arm to the top row of holes on the battery bracket. Weight: 226.80gDimensions: 152.4 x 114.3 x 45.7 mm Includes 4 x M3 x 12mm Pan Head Screws 4 x M3 x 8mm Pan Head Screws 4 x M3 x 8mm Phillips Flat Head Screws (for attaching D-Box if original screws were lost)
Wooden Camera Bolt On 19mm Rod SKU: 144900 19mm Rod for bolting onto any 1/4-20 mounting point. Great for mounting 19mm accessories to cheeseplates. Rod length is 38mm. Includes 1 x 1/4-20 x 3/8" screwWeight 45 gDimensions 3.81 cm x 2.03 cm x 1.52 cm