Shape Quick release adapter SKU: 577CNCQR The 577CNCQR Quick Release Assembly from SHAPE gives you the freedom to remove the camera from your rig or other piece of camera support equipment without having to unscrew it every time. It includes a quick-release plate that is interchangeable with tripod heads and other hardware that uses a Manfrotto 501PL or equivalent plate. Two 1/4″-20 screws and two 3/8″-16 screws are included so you can use the plate with various cameras. 0.8″ of sliding travel within plate to help balance gearPlate has 1/4″-20 and 3/8″-16 mounting screws, in addition to anti-twist video registration pin2-stage quick-release system Key Features Remove Camera Without Unscrewing Compatible with 501PL Type Plate Two 1/4″-20 and Two 3/8″-16 Screws

Shape Quick release plate adapter SKU: 577QR The SHAPE Quick Release Plate Adapter gives you the freedom to remove your camera from your tripod, stabilizer, or support rig without having to detach it from the plate. It includes a Manfrotto 501PL style sliding plate, meaning that the plate will also work with any Manfrotto system that accepts a 501PL plate. A 1/4″-20 screw and a 3/8″-16 screw are included so you can use the plate with various cameras. 1/4″-20 and 3/8″-16 threaded holes on the underside of the adapter allow you attach the plate to a tripod, stabilizer, or support rig. Three bubble levels are available to assist in leveling your camera. Manfrotto 501PL compatible sliding plate1/4″-20 and 3/8″-16 camera screwsSpring-loaded locking pin1/4″-20 and 3/8″-16 mounting threadsThree bubble levels Key Features Sliding Camera Plate 1/4″-20 and 3/8″-16 Camera Screws Spring-Loaded Locking Pin 1/4″-20 and 3/8″-16 Mounting Threads Compatible with Manfrotto 501PL Plate Three Bubble Levels

Shape Quick release plate delta SKU: DELTAQUICK The SHAPE Delta Marbel Quick Release Kit includes a V-lock delta quick release plate and V-lock delta quick release adapter that you can use to quickly mount any camera to any support platform. The quick release adapter is also compatible with third party V-lock delta plates, such as the Sony VCT-U14. Key Features V-Lock Quick Release Plate & Adapter Mount Any Camera to Any Support Platform Adjustable/Removable Camera Stoppers Supports Loads Up to 22,65 kg Quick release plate (QUICK) The SHAPE V-Mount quick release is specially designed for professional monopods and can be attached and removed quickly and easily. It is compatible with your tripod and monopod using the 3/8-16 and 1/4-20 thread. Delta adapter (DELTA) Quick release adaptor plate built with superior quality material; The V SHAPE is compatible with the Quick Release Marbel. Compatible with the Quick release plate Sony VCT-U14 and similar plates. You can attach the Quick Marbel Delta adaptor underneath your camera and attached it to your SHAPE camera rig.

Vocas Quick release dovetail plate SKU: 0350-2220 The quick release dovetail plate is a flat base plate with quick release lever. By using the camera adapter plate (0350-2250/0350-2255/0350-2260/0490-0045), the quick release dovetail plate is the perfect solution for mounting your camera into drones, gimbals, sliders or tripods. The quick release dovetail plate is part of the Vocas Sliding system, a revolutionary new way to mount camera’s to different setup’s, while balancing the camera optimally. The heart of this system is the camera adapter plate. This plate can be attached to any camera, and provides the camera with a mini dovetail connection. This allows the camera to slide on and off the various Vocas products that are bases on this mini dovetail system, like the USBP-15 MKII (0350-2200), USBP-19 MKII (0350-2205), BP-19 MKII (0480-0019) and Quick release dovetail plate (0350-2220). All of these products are equiped with a quick release lever, making it possible to find optimal balance for your set-up within seconds, without using any tools. A real benefit when changing lenses a lot. Furthermore, it’s easy to switch between 15 mm setups, 19 mm setups, drones, gimbals or any other conceivable setup that incorporates the quick release dovetail plate (0350-2220). This plate also fits directly in the mini dovetail underneath the Arri Amira, converting it into flat base.

Wooden Camera Quick Base SKU: 162000 Wooden Camera Quick Base (C100, C300, C500) is a quick release baseplate for the Canon Cinema EOS cameras that provides lightweight 15mm rod support at the correct lens height. Note that 15mm lightweight rods do not passthrough. If rear rods are needed, install additional Wooden Camera Rod Clamp (15mm LW) to rear. The baseplate can attach to any tripod plate or ARRI standard bridgeplate such as Bridgeplate (19mm) or Bridgeplate (15mm Studio). When studio rods are not needed, a Dovetail Clamp can be added instead to interface with 2060 Dovetails, Safety Dovetails, or Shoulder Rigs. Additional Rod Clamp (15mm LW) can be attached to rear of Quick Dovetail for independent rear rod support. To quick release out of dovetail/baseplate, turn thumbscrew and depress pin, move camera toward rear, and remove. Wooden Camera Quick Base Features 1/4-20 and 3/8-16 holes for attaching accessoriesQuick release slot based on ARRI standard dovetail1/4-20 and 3/8-16 holes on bottom for attaching to tripod or bridgeplateRosette Bracket - attaches to Quick Base front, provides ARRI standard rosettes for attaching handles and extensionsGO Shoulder - attaches to Quick Base rear, low profile shoulder pad for run and gun shooting Quick Base (C100, C300, C500) Includes 1 x 1/4-20 low profile screw1 x 3/8-16 low profile screw

Wooden Camera Quick Release Top Plate (Sony VENICE, VENICE 2) SKU: A00095 Customizable, endlessly configurable, and the industry’s only VENICE 2 Top Plate that slides on to the integrated dovetail on top of the camera for tool-less, quick-release transitions. The Top Plate features a bolt pattern with locating pins for mounting accessories anywhere on top of the camera, an integrated hook-and-loop mounting point, an integrated dovetail lock and safety release, plus 4x 1/4–20 screw-mounting points to secure the Top Plate to the camera body when quick-release access isn’t needed. Weight: 408 gDimensions: 190.5 x 103 x 13 mm

Wooden Camera Quick-Release Top Plate System (Sony VENICE, VENICE 2) SKU: A00208 Customizable, endlessly configurable, and the industry’s only VENICE 2 Top Plate that slides on to the integrated dovetail on top of the camera for tool-less, quick-release transitions. The Top Plate includes an integrated dovetail lock and safety release, plus 4x 1/4–20 screw-mounting points to secure the Top Plate to the camera body when quick-release isn’t needed. Build it out the way you want with optional Front and Rear Rod Brackets, Cheese Plate, Hook-and-loop Plate, and more, and slide the whole rigged plate on or off in one smooth sweep. Weight: 620.7 gDimensions: 216 mm x 153 mm x 60 mm Included Items Quick-Release Top Plate (Sony VENICE, VENICE 2)Top Plate 15mm Dual Rod Clamp (Sony VENICE, VENICE 2, Rialto, Rialto 2)Top Plate 15mm Upper Dual Rod Clamp (Sony VENICE, VENICE 2)Expansion Hook-and-Loop Plate (Sony VENICE, VENICE 2)Expansion Cheese Plate (Sony VENICE, VENICE 2)