8Sinn Cage for RED Komodo / Komodo-X SKU: 8-RK-X C 8Sinn cage for RED Komodo-X has been adapted from our previous model for RED Komodo. Over the years the cage proved to be a reliable solution for filmmakers all over the world. The 8Sinn cage for Red Komodo and now, Komodo-X is an aluminum three-piece cage, which has to be assembled on the camera body just before use. The modular structure facilitates mounting the cage. Lightweight construction with loads of mounting points does not add up too much weight to the whole setup, as the weight of the parts is only 257g. The 8Sinn cage forms a protective frame for your camera and it is tightly attached to the body by six screws. The sides are equipped with Arri locating points with a 3/8" opening in the middle, what's more, the bottom plate is covered with 1/4" mounting points. The bottom also includes two of six main mounting points. The cages come with two mounting screws and the assembly instruction. Key features solid cage-to-camera attachmentArri locating points (+ 3/8" mounting point)1/4" mounting points3-piece cagecompatible with: RED Komodo and RED Komodo-X

MID49 Base Kit for RED KOMODO / KOMODO-XSKU: M49-KTB-RED-KXV Base Kit for RED KOMODO and KOMODO-X is an accessory kit that includes: ARCA Top Mount (Komodo, Komodo-X, V-Raptor) is a top mount for RED Komodo-X that can attach to the front 1/4-20 or rear M4 screw holes and accepts the included handle and top plate. ARCA Top Handle - Sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mounts. Rod Bracket (15mm LW) - Attaches to the Top Handle or Top Plate to provide 15mm LW rod support. Baseline 15mm LW (RED Komodo, Komodo-X / Blackmagic Pocket 4K Baseplate) - Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom.

MID49 Base Kit for RED V-Raptor SKU: M49-KTB-RED-VR Base Kit for RED V-Raptor is an accessory kit that includes:ARCA Top Mount (V-Raptor) is a top mount for RED V-Raptor that can attach to the front 1/4-20 screw holes and accepts the included ARCA Top Handle. ARCA Top Handle - Sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mounts. Rod Bracket (15mm LW) attaches to the Top Handle or Top Plate to provide 15mm LW rod support.Baseline 15mm LW (RED V-Raptor Baseplate) - Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom. Weight: 510gDimensions: 121 x 112 x 135mm

MID49 Mid Kit for RED KOMODO-XSKU: M49-KTM-RED-KXV Mid Kit for RED KOMODO-X is an accessory kit that includes: ARCA Top Mount (Komodo, Komodo-X, V-Raptor) is a top mount for RED Komodo-X that can attach to the front 1/4-20 or rear M4 screw holes and accepts the included handle and top plate. ARCA Top Handle - Sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mounts. ARCA Top Plate (114mm) - Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail length. Rod Bracket (15mm LW) - Attaches to the Top Handle or Top Plate to provide 15mm LW rod support. Baseline 15mm LW (RED Komodo, Komodo-X / Blackmagic Pocket 4K Baseplate) - Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom. Breakout Side Plate for RED KOMODO and KOMODO-X - Side plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus ideal screw locations for breakout boxes like the included AB-1. Audio Breakout AB-1 (RED Komodo-X) - Adapts camera 00 LEMO connector to two standard full-size XLR's and attaches by a 1/4-20 to the included Side Plate. 2x 15mm 9inch stainless steel rods are included in the Mid kit.

MID49 Mid Kit for RED V-Raptor SKU: M49-KTM-RED-VR Mid Kit for RED V-Raptor is an accessory kit that includes ARCA Top Mount (V-Raptor) is a top mount for RED V-Raptor that can attach to the front 1/4-20 screw holes and accepts the included ARCA handle and top plateARCA Top Handle - Sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsARCA Top Plate (114mm) - Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail lengthRod Bracket (15mm LW) attaches to the Top Handle or Top Plate to provide 15mm LW rod supportBaseline 15mm LW (RED V-Raptor) - Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottomBreakout Side Plate for RED V-Raptor - Side plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus ideal screw locations for breakout boxes like the included AB-1Audio Breakout AB-1 (RED V-Raptor) adapts camera 00 LEMO connector to two standard full-size XLR's and attaches by a 1/4-20 to the included Side Plate2x 15mm 9inch stainless steel rods are included in the Mid Kit

Tilta Camera Cage for RED KOMODO-X Advanced Kit Black Designed with versatility in mind, this cage boasts an array of strategic mounting points including NATO Rails, a Cold Shoe Receiver, Arri Rosettes, and 1/4″-20 as well as 3/8″-16 threads with locating points. Included with the Full Cage, our new Lens Adapter Support employs a sophisticated clamp-based design, providing multiple points of contact for improved stability. This approach not only increases the security of your lens adapters, such as our Canon RF Mount to PL Mount Adapter, but also bolsters your confidence when using larger lenses. Experience a new level of convenience with our one of a kind Foldable Top Handle which allows users to swivel the bulk of the handle out of the way, providing unobstructed access to your camera’s top screen while still being compatible with the DSMC3 RED TOUCH 7.0″ monitor. This handle provides additional mounting points for accessories such as another Cold Shoe Receiver, a 15mm rod holder, 1/4″-20 and 3/8″-16 threads with locating points. This Tilta Camera Cage for RED KOMODO-X Advanced Kit Black includes a Left Side Wooden Handle that is carved from black walnut wood and feature an ergonomic design which is also rotatable, allowing users to find the perfect operating position and to re-position quickly when needed. In the box 1 x Full Camera Cage for RED KOMODO-X – Black（TA-T53-FCC-B）1 x Foldable Top Handle for RED KOMODO-X – Black（TA-T53-FTH-B)1 x Tiltaing Advanced Left Side Wooden Handle – Black(TA-ALWH-B)1 x Tiltaing Advanced Left Side Handle Attachment Type VIII – Black（TA-AHA8-L-B）1 x 15mm Side Single Rod Holder-Black（TA-SRA-15-B）1 x 15mm LWS Baseplate for RED Komodo – Black（TA-T08-BSP-B）2 x Aluminum Rod 15*200mm – Black（R15-200-B）1 x Battery Plate for RED V-RAPTOR – V Mount（ESR-T08-BP-V）/ GOLD-Mount (ESR-T08-BP-AB)1 x Advanced I/O Module for RED V-RAPTOR（ESR-T08-IOM）

Tilta Camera Cage for RED KOMODO-X Advanced Kit Black Designed with versatility in mind, this cage boasts an array of strategic mounting points including NATO Rails, a Cold Shoe Receiver, Arri Rosettes, and 1/4″-20 as well as 3/8″-16 threads with locating points. Included with the Full Cage, our new Lens Adapter Support employs a sophisticated clamp-based design, providing multiple points of contact for improved stability. This approach not only increases the security of your lens adapters, such as our Canon RF Mount to PL Mount Adapter, but also bolsters your confidence when using larger lenses. Experience a new level of convenience with our one of a kind Foldable Top Handle which allows users to swivel the bulk of the handle out of the way, providing unobstructed access to your camera’s top screen while still being compatible with the DSMC3 RED TOUCH 7.0″ monitor. This handle provides additional mounting points for accessories such as another Cold Shoe Receiver, a 15mm rod holder, 1/4″-20 and 3/8″-16 threads with locating points. This Tilta Camera Cage for RED KOMODO-X Advanced Kit Black includes a Left Side Wooden Handle that is carved from black walnut wood and feature an ergonomic design which is also rotatable, allowing users to find the perfect operating position and to re-position quickly when needed. In the box 1 x Full Camera Cage for RED KOMODO-X – Black（TA-T53-FCC-B）1 x Foldable Top Handle for RED KOMODO-X – Black（TA-T53-FTH-B)1 x Tiltaing Advanced Left Side Wooden Handle – Black(TA-ALWH-B)1 x Tiltaing Advanced Left Side Handle Attachment Type VIII – Black（TA-AHA8-L-B）1 x 15mm Side Single Rod Holder-Black（TA-SRA-15-B）1 x 15mm LWS Baseplate for RED Komodo – Black（TA-T08-BSP-B）2 x Aluminum Rod 15*200mm – Black（R15-200-B）1 x Battery Plate for RED V-RAPTOR – V Mount（ESR-T08-BP-V）/ GOLD-Mount (ESR-T08-BP-AB)1 x Advanced I/O Module for RED V-RAPTOR（ESR-T08-IOM）

Tilta Camera Cage for RED KOMODO-X Lightweight Kit Black SKU: TA-T53-B-B Built to safeguard your compact cinema camera, our system protects your camera in a secure and durable full camera cage, which is the foundation of this kit. Designed with versatility in mind, the cage boasts an array of strategic mounting points including NATO Rails, a Cold Shoe Receiver, Arri Rosettes, and 1/4″-20 as well as 3/8″-16 threads with locating points. Included with the Full Cage, our new Lens Adapter Support employs a sophisticated clamp-based design, providing multiple points of contact for improved stability. Dimensions: 33,02 x 15,24 x 12,70 cmWeight: 1,08 kgIn the box 1 x Full Camera Cage for RED KOMODO-X – Black（TA-T53-FCC-B)1 x Tiltaing Lightweight Quick Release Top Handle – Black（TA-QRTH3-B)1 x Tiltaing Left Side Wooden Handle – Black (TA-LWH-B)1 x Tiltaing Advanced Left Side Handle Attachment Type VI – Black（TA-AHA6-L-B)

TILTA Camera Cage for RED V-RAPTOR Advanced Kit The Full Camera Cage provides protective armor for the RED V-Raptor and greatly expands your options for mounting accessories. The cage features both 1/4”-20 and 3/8”-16 threads, integrated NATO Rails for Side Handles and two Arri compatible rosettes. The included 15mm LWS Baseplate and two 15mm Rods allow you to utilize rod based accessories such as matte boxes and follow focus systems. Under the Baseplate you’ll find a Tilta Standard Dovetail Receiver which can be adapted to support Arri Standard Dovetails via our optional Tilta Standard to Arri Standard Multi-Functional Baseplate. The Top Plate and Rear Top Plate offer expanded options for mounting accessories without interfering with the camera’s ventilation. The Rear Top Plate also includes exhaust vents engineered to mimic the V-Raptor’s integrated ventilation system in order to provide maximum cooling capability. The Top Handle attaches to both the Top Plate and Front Top Plate which creates a secure point of contact for handling and operating your camera while also providing additional mounting points for accessories. The included Bottom Mounting Plate attaches near the bottom of the Camera Cage, offers additional 1/4”-20 mounting points with locating pins, and serves as an alternative location to mount the Advanced I/O Module. The Right and Left Side Single Rod Holders mount along the side of the Full Camera Cage which provide a lightweight alternative to the baseplate. Options ESR-T08-B-V (V-Mount)ESR-T08-B-AB (GOLD Mount) In the box 1 x Full Camera Cage for RED V-RAPTOR（ESR-T08-FCC 1 x Front Top Plate for RED V-RAPTOR（ESR-T08-FTP 1 x Rear Top Plate for RED V-RAPTOR（ESR-T08-RTP 1 x Bottom Mounting Plate for RED V-RAPTOR（ESR-T08-BMP 1 x Aluminum Rod 15*200mm Black(Pair)（R15-200-B-P) pair 1 x 15mm LWS Baseplate for RED V-RAPTOR（ESR-T08-BSP 1 x Left Side Single Rod Holder for RED V-RAPTOR（ESR-T08-LRH 1 x Right Side Single Rod Holder for RED V-RAPTOR（ESR-T08-RRH 1 x Top Handle for RED V-RAPTOR（ESR-T08-TH） 1 x Advanced I/O Module for RED V-RAPTOR(ESR-T08-IOM) 1 x Battery Plate for RED V-RAPTOR – V Mount（ESR-T08-BP-V) / Gold Mount（ESR-T08-BP-AB)

TILTA Camera Cage for RED V-RAPTOR Advanced Kit The Full Camera Cage provides protective armor for the RED V-Raptor and greatly expands your options for mounting accessories. The cage features both 1/4”-20 and 3/8”-16 threads, integrated NATO Rails for Side Handles and two Arri compatible rosettes. The included 15mm LWS Baseplate and two 15mm Rods allow you to utilize rod based accessories such as matte boxes and follow focus systems. Under the Baseplate you’ll find a Tilta Standard Dovetail Receiver which can be adapted to support Arri Standard Dovetails via our optional Tilta Standard to Arri Standard Multi-Functional Baseplate. The Top Plate and Rear Top Plate offer expanded options for mounting accessories without interfering with the camera’s ventilation. The Rear Top Plate also includes exhaust vents engineered to mimic the V-Raptor’s integrated ventilation system in order to provide maximum cooling capability. The Top Handle attaches to both the Top Plate and Front Top Plate which creates a secure point of contact for handling and operating your camera while also providing additional mounting points for accessories. The included Bottom Mounting Plate attaches near the bottom of the Camera Cage, offers additional 1/4”-20 mounting points with locating pins, and serves as an alternative location to mount the Advanced I/O Module. The Right and Left Side Single Rod Holders mount along the side of the Full Camera Cage which provide a lightweight alternative to the baseplate. Options ESR-T08-B-V (V-Mount)ESR-T08-B-AB (GOLD Mount) In the box 1 x Full Camera Cage for RED V-RAPTOR（ESR-T08-FCC 1 x Front Top Plate for RED V-RAPTOR（ESR-T08-FTP 1 x Rear Top Plate for RED V-RAPTOR（ESR-T08-RTP 1 x Bottom Mounting Plate for RED V-RAPTOR（ESR-T08-BMP 1 x Aluminum Rod 15*200mm Black(Pair)（R15-200-B-P) pair 1 x 15mm LWS Baseplate for RED V-RAPTOR（ESR-T08-BSP 1 x Left Side Single Rod Holder for RED V-RAPTOR（ESR-T08-LRH 1 x Right Side Single Rod Holder for RED V-RAPTOR（ESR-T08-RRH 1 x Top Handle for RED V-RAPTOR（ESR-T08-TH） 1 x Advanced I/O Module for RED V-RAPTOR(ESR-T08-IOM) 1 x Battery Plate for RED V-RAPTOR – V Mount（ESR-T08-BP-V) / Gold Mount（ESR-T08-BP-AB)

Wooden Camera Rear Cage System (RED KOMODO-X) SKU: A00548 Utilizing the tie-in points at the top end of the camera's body, this Rear Cage System provides much-needed mounting points on the rear side of the camera. The cage allows users to tie into other components like the side rails, adding stability to the entire rig. A built-in Rail System utilizes Accessory Rails to further add a quick-release function to compatible accessories like Accessory Plates or the B-Box for (KOMODO, KOMODO-X, V-RAPTOR). This Wooden Camera Rear Cage System is also compatible with other accessories like the Rigging Top Plate.Included ItemsRear Cage - Right - RED KOMODO-XRear Cage - Left - RED KOMODO-XSpecificationsWeight: 123 gDimensions: 69 x 129 x 107 mm