MID49 Mid Kit (FUJIFILM GFX ETERNA)

MID49 Base Kit for FUJIFILM GFX ETERNASKU: M49-KTB-FUJEBase Kit for FUJIFILM GFX ETERNA includes:Top Plate (FUJIFILM GFX ETERNA)Attaches to the top of the camera and provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, and M4x20mm ARRI standard threaded holes. Segmented design allows the original ETERNA handle to be installed in the camera's dovetail slot over the Top Plate. When the top handle is removed, the smaller section of Top Plate can be added.Baseline 15mm LW (FUJIFILM GFX ETERNA)A baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens and attaches to the bottom of the camera by three 3/8-16 screws. The center of the LW 15mm Bracket has a 1/4-20 vertical support post, which can be used to support lens adapters like Metabones, etc.Product Weight: 438g

MID49 Mid Kit for RED KOMODO-XSKU: M49-KTM-RED-KXV Mid Kit for RED KOMODO-X is an accessory kit that includes: ARCA Top Mount (Komodo, Komodo-X, V-Raptor) is a top mount for RED Komodo-X that can attach to the front 1/4-20 or rear M4 screw holes and accepts the included handle and top plate. ARCA Top Handle - Sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mounts. ARCA Top Plate (114mm) - Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail length. Rod Bracket (15mm LW) - Attaches to the Top Handle or Top Plate to provide 15mm LW rod support. Baseline 15mm LW (RED Komodo, Komodo-X / Blackmagic Pocket 4K Baseplate) - Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom. Breakout Side Plate for RED KOMODO and KOMODO-X - Side plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus ideal screw locations for breakout boxes like the included AB-1. Audio Breakout AB-1 (RED Komodo-X) - Adapts camera 00 LEMO connector to two standard full-size XLR's and attaches by a 1/4-20 to the included Side Plate. 2x 15mm 9inch stainless steel rods are included in the Mid kit.

MID49 Mid Kit for RED V-Raptor SKU: M49-KTM-RED-VR Mid Kit for RED V-Raptor is an accessory kit that includes ARCA Top Mount (V-Raptor) is a top mount for RED V-Raptor that can attach to the front 1/4-20 screw holes and accepts the included ARCA handle and top plateARCA Top Handle - Sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsARCA Top Plate (114mm) - Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail lengthRod Bracket (15mm LW) attaches to the Top Handle or Top Plate to provide 15mm LW rod supportBaseline 15mm LW (RED V-Raptor) - Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottomBreakout Side Plate for RED V-Raptor - Side plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus ideal screw locations for breakout boxes like the included AB-1Audio Breakout AB-1 (RED V-Raptor) adapts camera 00 LEMO connector to two standard full-size XLR's and attaches by a 1/4-20 to the included Side Plate2x 15mm 9inch stainless steel rods are included in the Mid Kit

MID49 Mid Kit for Blackmagic Cinema Camera 6K SKU: M49-KTM-BMD-P6K Mid Kit for Blackmagic Cinema Camera 6K (Full Frame, Pocket Pro, Pocket G2) is an accessory kit that includes:Upper Cage for Blackmagic Cinema Camera 6K (Full Frame, Pocket Pro, Pocket G2) is a Form fitting cage with 1/4-20, 3/8-16, and M4x20mm threaded holes in several places along with shoe mounts and 15mm rod clamps. ARCA Swiss dovetail slot on top accepts included ARCA Top Handle and Top Plate. Two included 15mm accessory rods provide additional mounting for included AB-6 XLR adapter. Lower ARCA Swiss dovetail attaches to included baseplate and lens support adapter attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Core) is a quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottomBaseline ARRI Dovetail is the lower ARRI mounting plate that interfaces with the Baseline CoreARCA Top Handle is a sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsARCA Top Plate (114mm) is a sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail lengthRod Bracket (15mm LW) attaches to the Top Handle or Top Plate to provide 15mm LW rod supportAudio Breakout AB-6 (Blackmagic Pocket 6K Pro, G2) adapts the camera's two mini XLRs to standard, full-size XLRs2x 15mm 9 inch stainless steel rods are included in the Mid Kit.

MID49 Mid Kit for Sony Burano SKU: M49-KTM-SON-BUR Mid Kit for Sony Burano is an accessory kit that includes: Top Plate (Sony Burano) attaches to the top of the camera and provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, M4x20mm ARRI standard threaded holes, and center ARCA clamp interface for holding ARCA Top Handle and Gimbal Mounting PlatesARCA Top Handle is a sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsSingle 15mm Rod Clamp (M4 x 20mm) attaches to the ARCA Top Handle and holds Sony's included Burano EVF system. Also great for attaching lens motors in a compact configurationSony Burano EVF Pivot Adaptor allows the Burano LCD panel to switch from monitor configuration to viewfinder configuration without tools. Just grab and twist2x Cage NATO Side Arm (ARRI 3/8-16) attaches to the sides of the Top Plate and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each end15mm Rod (7", Aluminum) can replace Sony's included Burano sideways 15mm rod to allow further positioning of the EVF Mount and adds additional space for right side accessoriesBaseline 15mm LW (Sony Burano Baseplate) is an Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom2x 15mm 9inch stainless steel rods are included in the Mid kit

MID49 Mid Kit for Blackmagic PYXISSKU: M49-KTM-BMD-PYMid Kit for Blackmagic PYXIS is an accessory kit that includes:Top Plate (Blackmagic PYXIS)Provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, M4x20mm ARRI standard threaded holes, and ventilation holes for the PYXIS fan2x Cage NATO Side Arm (ARRI 3/8-16)Attaches to the sides of the Top Plate and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each endARCA Top HandleSliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsBaseline 15mm LW (Blackmagic PYXIS)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom2x 15mm Rod (9 inch)Stainless steel iris rodsSide Plate (Blackmagic PYXIS)A mounting plate that attaches to the side of the camera and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. =A marked set of 3/8-16 and 1/4-20 holes are on the sensor axis and the plate is the correct thickness to mount the camera vertically on Baseline 15mm LW (Blackmagic PYXIS) and use 15mm rods at the correct lens heightAudio Breakout AB-9 (Blackmagic PYXIS)A passive adapter that converts the camera's front mini XLR and rear 3.5mm TRS plug into two standard, full-size XLRs. Input 1 - balanced audio with phantom power via camera menuInput 2 - unbalanced audio, no phantom power available9.5 inch (24 cm) cable length with custom low profile mini XLR connector and Neutrik 3.5mm TRS.

MID49 Mid Kit for Canon C80SKU: M49-KTM-CAN-C80 Mid Kit for Canon C80 is an accessory kit that includes:Upper Cage for Canon C80Form fitting cage with 1/4-20, 3/8-16, and M4x20mm threaded holes in several places along with a shoe mount and 15mm rod clamps. ARCA Swiss dovetail slot on top accepts included ARCA Top Handle and Top Plate. The included 15mm accessory rod provide additional mounting for included AB-4 XLR adapter. Lower ARCA Swiss dovetail attaches to included baseplate and lens support adapter attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Core)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom.Baseline ARRI DovetailBaseline ARRI Dovetail is the lower ARRI mounting plate that interfaces with the Baseline Core.ARCA Top HandleSliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mounts.ARCA Top Plate (114mm)Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail length.Rod Bracket (15mm LW)Attaches to the Top Handle or Top Plate to provide 15mm LW rod support.Audio Breakout AB-4 (Canon C70/C80)Adapts the camera's two mini XLRs to standard, full-size XLRs2x 15mm 9 inch stainless steel rods are included in the Mid Kit.

MID49 Mid Kit for Canon C50SKU: M49-KTM-CAN-C50Mid Kit for Canon C50 is an accessory kit that includes:Upper Cage for Canon C50Form-fitting cage with 1/4-20, 3/8-16, and M4x20mm ARRI MAP threaded holes in several places. HDMI lock with reduction inserts protects the camera's HDMI port from abuse. Left side camera tie-down keeps the C50 from tipping under the force of focus motors. Rear handle tie-down adds stability to the handle-body connection when using heavy lenses. Lower ARCA Swiss dovetail attaches to the included baseplate, and the adjustable lens support adapter with 3 lengths of 1/4-20 support screw attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Upper Cage Canon C50)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom.Canon C50 15mm Rod ClampAttaches to the handle's M4 screws in place of the microphone shockmount. Replica M4 holes available for stacking the mic holder. M4x20mm ARRI MAP holes are available along with an ARRI 1/4-20.2x 15mm Rod (9 inch)Stainless steel iris rods.