MID49 Canon Rod Clamp + TWIST Mount Kit (C400, C300mkIII, C500mkII, LM-V2)

MID49 TWIST Mount EVF KitTWIST Mount EVF Kit with Knuckle includes the Double Sided NATO Rail to 15mm Rod which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately).The NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. TWIST Mount EVF Kit with Knuckle Onlyincludes the NATO rail and Knuckle described aboveTWIST Mount EVF Kit for Canon C400, C300mkIII, C500mkII, LM-V2includes the NATO rail, Knuckle, and Canon Monitor SpudWorks with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount EVF Kit with ARRI M6 Rosetteincludes the NATO rail, Knuckle, and male ARRI M6 Rosette SpudWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYEFor Kinefinity Eagle SDI, a 1/4-20 version is required.TWIST Mount EVF Kit with ARRI 1/4-20includes the NATO rail, Knuckle, and male ARRI 1/4-20 SpudWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1Works with PORTKEYS LH7P (be careful, the monitor is plastic)TWIST Mount EVF Kit with ARRI 3/8-16includes the NATO rail, Knuckle, and male ARRI 3/8-16 SpudWorks with Atomos Shogun Monitor-Recorder (ATOMSHG002)TWIST Mount EVF Kit with Sony 1/4-20includes the NATO rail, Knuckle, and male Sony 1/4-20 SpudWorks with Sony Burano directly and also the EVF Pivot AdapterTWIST Mount EVF Kit with L Bracket 1/4-20includes the NATO rail, Knuckle, and L Bracket with 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFTWIST Mount EVF Kit with Female ARRI 1/4-20includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount EVF Kit with Female ARRI 3/8-16includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount EVF Combo Kitincludes the NATO rail, Knuckle, and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16Note this does not include the specific Canon and Sony attachments TWIST Mount EVF Kit with Blackmagic Viewfinder WedgeIncludes the NATO rail, Knuckle, and Blackmagic Viewfinder Wedge Spud, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately)The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removalIncluded TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew

MID49 TWIST Mount EVF KitTWIST Mount EVF Kit with Knuckle includes the Double Sided NATO Rail to 15mm Rod which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately).The NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. TWIST Mount EVF Kit with Knuckle Onlyincludes the NATO rail and Knuckle described aboveTWIST Mount EVF Kit for Canon C400, C300mkIII, C500mkII, LM-V2includes the NATO rail, Knuckle, and Canon Monitor SpudWorks with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount EVF Kit with ARRI M6 Rosetteincludes the NATO rail, Knuckle, and male ARRI M6 Rosette SpudWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYEFor Kinefinity Eagle SDI, a 1/4-20 version is required.TWIST Mount EVF Kit with ARRI 1/4-20includes the NATO rail, Knuckle, and male ARRI 1/4-20 SpudWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1Works with PORTKEYS LH7P (be careful, the monitor is plastic)TWIST Mount EVF Kit with ARRI 3/8-16includes the NATO rail, Knuckle, and male ARRI 3/8-16 SpudWorks with Atomos Shogun Monitor-Recorder (ATOMSHG002)TWIST Mount EVF Kit with Sony 1/4-20includes the NATO rail, Knuckle, and male Sony 1/4-20 SpudWorks with Sony Burano directly and also the EVF Pivot AdapterTWIST Mount EVF Kit with L Bracket 1/4-20includes the NATO rail, Knuckle, and L Bracket with 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFTWIST Mount EVF Kit with Female ARRI 1/4-20includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount EVF Kit with Female ARRI 3/8-16includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount EVF Combo Kitincludes the NATO rail, Knuckle, and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16Note this does not include the specific Canon and Sony attachments TWIST Mount EVF Kit with Blackmagic Viewfinder WedgeIncludes the NATO rail, Knuckle, and Blackmagic Viewfinder Wedge Spud, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately)The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removalIncluded TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew

MID49 TWIST Mount EVF KitTWIST Mount EVF Kit with Knuckle includes the Double Sided NATO Rail to 15mm Rod which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately).The NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. TWIST Mount EVF Kit with Knuckle Onlyincludes the NATO rail and Knuckle described aboveTWIST Mount EVF Kit for Canon C400, C300mkIII, C500mkII, LM-V2includes the NATO rail, Knuckle, and Canon Monitor SpudWorks with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount EVF Kit with ARRI M6 Rosetteincludes the NATO rail, Knuckle, and male ARRI M6 Rosette SpudWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYEFor Kinefinity Eagle SDI, a 1/4-20 version is required.TWIST Mount EVF Kit with ARRI 1/4-20includes the NATO rail, Knuckle, and male ARRI 1/4-20 SpudWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1Works with PORTKEYS LH7P (be careful, the monitor is plastic)TWIST Mount EVF Kit with ARRI 3/8-16includes the NATO rail, Knuckle, and male ARRI 3/8-16 SpudWorks with Atomos Shogun Monitor-Recorder (ATOMSHG002)TWIST Mount EVF Kit with Sony 1/4-20includes the NATO rail, Knuckle, and male Sony 1/4-20 SpudWorks with Sony Burano directly and also the EVF Pivot AdapterTWIST Mount EVF Kit with L Bracket 1/4-20includes the NATO rail, Knuckle, and L Bracket with 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFTWIST Mount EVF Kit with Female ARRI 1/4-20includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount EVF Kit with Female ARRI 3/8-16includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount EVF Combo Kitincludes the NATO rail, Knuckle, and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16Note this does not include the specific Canon and Sony attachments TWIST Mount EVF Kit with Blackmagic Viewfinder WedgeIncludes the NATO rail, Knuckle, and Blackmagic Viewfinder Wedge Spud, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately)The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removalIncluded TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew

MID49 TWIST Mount EVF KitTWIST Mount EVF Kit with Knuckle includes the Double Sided NATO Rail to 15mm Rod which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately).The NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. TWIST Mount EVF Kit with Knuckle Onlyincludes the NATO rail and Knuckle described aboveTWIST Mount EVF Kit for Canon C400, C300mkIII, C500mkII, LM-V2includes the NATO rail, Knuckle, and Canon Monitor SpudWorks with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount EVF Kit with ARRI M6 Rosetteincludes the NATO rail, Knuckle, and male ARRI M6 Rosette SpudWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYEFor Kinefinity Eagle SDI, a 1/4-20 version is required.TWIST Mount EVF Kit with ARRI 1/4-20includes the NATO rail, Knuckle, and male ARRI 1/4-20 SpudWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1Works with PORTKEYS LH7P (be careful, the monitor is plastic)TWIST Mount EVF Kit with ARRI 3/8-16includes the NATO rail, Knuckle, and male ARRI 3/8-16 SpudWorks with Atomos Shogun Monitor-Recorder (ATOMSHG002)TWIST Mount EVF Kit with Sony 1/4-20includes the NATO rail, Knuckle, and male Sony 1/4-20 SpudWorks with Sony Burano directly and also the EVF Pivot AdapterTWIST Mount EVF Kit with L Bracket 1/4-20includes the NATO rail, Knuckle, and L Bracket with 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFTWIST Mount EVF Kit with Female ARRI 1/4-20includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount EVF Kit with Female ARRI 3/8-16includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount EVF Combo Kitincludes the NATO rail, Knuckle, and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16Note this does not include the specific Canon and Sony attachments TWIST Mount EVF Kit with Blackmagic Viewfinder WedgeIncludes the NATO rail, Knuckle, and Blackmagic Viewfinder Wedge Spud, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately)The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removalIncluded TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew

MID49 TWIST Mount EVF KitTWIST Mount EVF Kit with Knuckle includes the Double Sided NATO Rail to 15mm Rod which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately).The NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. TWIST Mount EVF Kit with Knuckle Onlyincludes the NATO rail and Knuckle described aboveTWIST Mount EVF Kit for Canon C400, C300mkIII, C500mkII, LM-V2includes the NATO rail, Knuckle, and Canon Monitor SpudWorks with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount EVF Kit with ARRI M6 Rosetteincludes the NATO rail, Knuckle, and male ARRI M6 Rosette SpudWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYEFor Kinefinity Eagle SDI, a 1/4-20 version is required.TWIST Mount EVF Kit with ARRI 1/4-20includes the NATO rail, Knuckle, and male ARRI 1/4-20 SpudWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1Works with PORTKEYS LH7P (be careful, the monitor is plastic)TWIST Mount EVF Kit with ARRI 3/8-16includes the NATO rail, Knuckle, and male ARRI 3/8-16 SpudWorks with Atomos Shogun Monitor-Recorder (ATOMSHG002)TWIST Mount EVF Kit with Sony 1/4-20includes the NATO rail, Knuckle, and male Sony 1/4-20 SpudWorks with Sony Burano directly and also the EVF Pivot AdapterTWIST Mount EVF Kit with L Bracket 1/4-20includes the NATO rail, Knuckle, and L Bracket with 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFTWIST Mount EVF Kit with Female ARRI 1/4-20includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount EVF Kit with Female ARRI 3/8-16includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount EVF Combo Kitincludes the NATO rail, Knuckle, and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16Note this does not include the specific Canon and Sony attachments TWIST Mount EVF Kit with Blackmagic Viewfinder WedgeIncludes the NATO rail, Knuckle, and Blackmagic Viewfinder Wedge Spud, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately)The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removalIncluded TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew

MID49 TWIST Mount EVF KitTWIST Mount EVF Kit with Knuckle includes the Double Sided NATO Rail to 15mm Rod which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately).The NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. TWIST Mount EVF Kit with Knuckle Onlyincludes the NATO rail and Knuckle described aboveTWIST Mount EVF Kit for Canon C400, C300mkIII, C500mkII, LM-V2includes the NATO rail, Knuckle, and Canon Monitor SpudWorks with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount EVF Kit with ARRI M6 Rosetteincludes the NATO rail, Knuckle, and male ARRI M6 Rosette SpudWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYEFor Kinefinity Eagle SDI, a 1/4-20 version is required.TWIST Mount EVF Kit with ARRI 1/4-20includes the NATO rail, Knuckle, and male ARRI 1/4-20 SpudWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1Works with PORTKEYS LH7P (be careful, the monitor is plastic)TWIST Mount EVF Kit with ARRI 3/8-16includes the NATO rail, Knuckle, and male ARRI 3/8-16 SpudWorks with Atomos Shogun Monitor-Recorder (ATOMSHG002)TWIST Mount EVF Kit with Sony 1/4-20includes the NATO rail, Knuckle, and male Sony 1/4-20 SpudWorks with Sony Burano directly and also the EVF Pivot AdapterTWIST Mount EVF Kit with L Bracket 1/4-20includes the NATO rail, Knuckle, and L Bracket with 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFTWIST Mount EVF Kit with Female ARRI 1/4-20includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount EVF Kit with Female ARRI 3/8-16includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount EVF Combo Kitincludes the NATO rail, Knuckle, and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16Note this does not include the specific Canon and Sony attachments TWIST Mount EVF Kit with Blackmagic Viewfinder WedgeIncludes the NATO rail, Knuckle, and Blackmagic Viewfinder Wedge Spud, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately)The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removalIncluded TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew

MID49 TWIST Mount EVF KitTWIST Mount EVF Kit with Knuckle includes the Double Sided NATO Rail to 15mm Rod which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately).The NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. TWIST Mount EVF Kit with Knuckle Onlyincludes the NATO rail and Knuckle described aboveTWIST Mount EVF Kit for Canon C400, C300mkIII, C500mkII, LM-V2includes the NATO rail, Knuckle, and Canon Monitor SpudWorks with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount EVF Kit with ARRI M6 Rosetteincludes the NATO rail, Knuckle, and male ARRI M6 Rosette SpudWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYEFor Kinefinity Eagle SDI, a 1/4-20 version is required.TWIST Mount EVF Kit with ARRI 1/4-20includes the NATO rail, Knuckle, and male ARRI 1/4-20 SpudWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1Works with PORTKEYS LH7P (be careful, the monitor is plastic)TWIST Mount EVF Kit with ARRI 3/8-16includes the NATO rail, Knuckle, and male ARRI 3/8-16 SpudWorks with Atomos Shogun Monitor-Recorder (ATOMSHG002)TWIST Mount EVF Kit with Sony 1/4-20includes the NATO rail, Knuckle, and male Sony 1/4-20 SpudWorks with Sony Burano directly and also the EVF Pivot AdapterTWIST Mount EVF Kit with L Bracket 1/4-20includes the NATO rail, Knuckle, and L Bracket with 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFTWIST Mount EVF Kit with Female ARRI 1/4-20includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount EVF Kit with Female ARRI 3/8-16includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount EVF Combo Kitincludes the NATO rail, Knuckle, and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16Note this does not include the specific Canon and Sony attachments TWIST Mount EVF Kit with Blackmagic Viewfinder WedgeIncludes the NATO rail, Knuckle, and Blackmagic Viewfinder Wedge Spud, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately)The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removalIncluded TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew

MID49 TWIST Mount EVF KitTWIST Mount EVF Kit with Knuckle includes the Double Sided NATO Rail to 15mm Rod which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately).The NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. TWIST Mount EVF Kit with Knuckle Onlyincludes the NATO rail and Knuckle described aboveTWIST Mount EVF Kit for Canon C400, C300mkIII, C500mkII, LM-V2includes the NATO rail, Knuckle, and Canon Monitor SpudWorks with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount EVF Kit with ARRI M6 Rosetteincludes the NATO rail, Knuckle, and male ARRI M6 Rosette SpudWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYEFor Kinefinity Eagle SDI, a 1/4-20 version is required.TWIST Mount EVF Kit with ARRI 1/4-20includes the NATO rail, Knuckle, and male ARRI 1/4-20 SpudWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1Works with PORTKEYS LH7P (be careful, the monitor is plastic)TWIST Mount EVF Kit with ARRI 3/8-16includes the NATO rail, Knuckle, and male ARRI 3/8-16 SpudWorks with Atomos Shogun Monitor-Recorder (ATOMSHG002)TWIST Mount EVF Kit with Sony 1/4-20includes the NATO rail, Knuckle, and male Sony 1/4-20 SpudWorks with Sony Burano directly and also the EVF Pivot AdapterTWIST Mount EVF Kit with L Bracket 1/4-20includes the NATO rail, Knuckle, and L Bracket with 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFTWIST Mount EVF Kit with Female ARRI 1/4-20includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount EVF Kit with Female ARRI 3/8-16includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount EVF Combo Kitincludes the NATO rail, Knuckle, and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16Note this does not include the specific Canon and Sony attachments TWIST Mount EVF Kit with Blackmagic Viewfinder WedgeIncludes the NATO rail, Knuckle, and Blackmagic Viewfinder Wedge Spud, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately)The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removalIncluded TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew

MID49 TWIST Mount EVF KitTWIST Mount EVF Kit with Knuckle includes the Double Sided NATO Rail to 15mm Rod which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately).The NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. TWIST Mount EVF Kit with Knuckle Onlyincludes the NATO rail and Knuckle described aboveTWIST Mount EVF Kit for Canon C400, C300mkIII, C500mkII, LM-V2includes the NATO rail, Knuckle, and Canon Monitor SpudWorks with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount EVF Kit with ARRI M6 Rosetteincludes the NATO rail, Knuckle, and male ARRI M6 Rosette SpudWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYEFor Kinefinity Eagle SDI, a 1/4-20 version is required.TWIST Mount EVF Kit with ARRI 1/4-20includes the NATO rail, Knuckle, and male ARRI 1/4-20 SpudWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1Works with PORTKEYS LH7P (be careful, the monitor is plastic)TWIST Mount EVF Kit with ARRI 3/8-16includes the NATO rail, Knuckle, and male ARRI 3/8-16 SpudWorks with Atomos Shogun Monitor-Recorder (ATOMSHG002)TWIST Mount EVF Kit with Sony 1/4-20includes the NATO rail, Knuckle, and male Sony 1/4-20 SpudWorks with Sony Burano directly and also the EVF Pivot AdapterTWIST Mount EVF Kit with L Bracket 1/4-20includes the NATO rail, Knuckle, and L Bracket with 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFTWIST Mount EVF Kit with Female ARRI 1/4-20includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount EVF Kit with Female ARRI 3/8-16includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount EVF Combo Kitincludes the NATO rail, Knuckle, and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16Note this does not include the specific Canon and Sony attachments TWIST Mount EVF Kit with Blackmagic Viewfinder WedgeIncludes the NATO rail, Knuckle, and Blackmagic Viewfinder Wedge Spud, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately)The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removalIncluded TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew

MID49 TWIST Mount EVF KitTWIST Mount EVF Kit with Knuckle includes the Double Sided NATO Rail to 15mm Rod which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately).The NATO rail has built in variable friction via the thumbscrew and safety pins are on each end to prevent accidental accessory removal.Included TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew. TWIST Mount EVF Kit with Knuckle Onlyincludes the NATO rail and Knuckle described aboveTWIST Mount EVF Kit for Canon C400, C300mkIII, C500mkII, LM-V2includes the NATO rail, Knuckle, and Canon Monitor SpudWorks with Canon C400, C300mkIII, C500mkII, and LM-V2TWIST Mount EVF Kit with ARRI M6 Rosetteincludes the NATO rail, Knuckle, and male ARRI M6 Rosette SpudWorks with Zacuto Gratical, Gratical Eye, and Kameleon Pro EVFWorks with Z CAM 2.89" EVF101Works with original PORTKEYS OEYEFor Kinefinity Eagle SDI, a 1/4-20 version is required.TWIST Mount EVF Kit with ARRI 1/4-20includes the NATO rail, Knuckle, and male ARRI 1/4-20 SpudWorks with Blackmagic Design PYXIS MonitorWorks with recent SmallHD monitors like Indie 5, Cine 5, and Ultra 5Works with ARRI Camera Control Monitor CCM-1Works with PORTKEYS LH7P (be careful, the monitor is plastic)TWIST Mount EVF Kit with ARRI 3/8-16includes the NATO rail, Knuckle, and male ARRI 3/8-16 SpudWorks with Atomos Shogun Monitor-Recorder (ATOMSHG002)TWIST Mount EVF Kit with Sony 1/4-20includes the NATO rail, Knuckle, and male Sony 1/4-20 SpudWorks with Sony Burano directly and also the EVF Pivot AdapterTWIST Mount EVF Kit with L Bracket 1/4-20includes the NATO rail, Knuckle, and L Bracket with 1/4-20 screwsWorks with PORTKEYS LEYE III (note their HDMI cable may conflict with NATO rail in certain positions)Works with original RED DSMC1 EVFTWIST Mount EVF Kit with Female ARRI 1/4-20includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 1/4-20 product including those with ARRI spaced locating pins (3mm diameter pin on 10.4mm spacing center to center)TWIST Mount EVF Kit with Female ARRI 3/8-16includes the NATO rail, Knuckle, and female ARRI 1/4-20 SpudWorks with any 3/8-16 product including those with ARRI spaced locating pins (3mm diameter pin on 15mm spacing center to center)TWIST Mount EVF Combo Kitincludes the NATO rail, Knuckle, and ARRI M6 Rosette, ARRI 1/4-20, ARRI 3/8-16, L Bracket 1/4-20, Female ARRI 1/4-20, Female ARRI 3/8-16Note this does not include the specific Canon and Sony attachments TWIST Mount EVF Kit with Blackmagic Viewfinder WedgeIncludes the NATO rail, Knuckle, and Blackmagic Viewfinder Wedge Spud, which can attach to a sideways 15mm rod clamp like the optional items Multi-Function Rod Bracket (MFRB 15mm LW), Single 15mm Rod Clamp (M4 x 20mm), or Canon 1/4-20 Striped Rosette 15mm Rod Clamp (sold separately)The NATO rail has built-in variable friction via the thumbscrew, and safety pins are on each end to prevent accidental accessory removalIncluded TWIST Mount EVF Knuckle has a NATO clamp on one end and a variable friction 15mm mount on the other. With the variable friction design, you can grab and twist the monitor without loosening the thumbscrew