camRade wetSuit EFP Large Grey

Porta Brace RS-HCXFB80ENG The RS-HCXFB80ENG offers complete weather protection for stadium cameras with ENG-style lenses and flat-screen monitor displays. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed. Long sleeves and interior pockets for holding air-activated hand warmers help keep the camera operator dry and warm. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through. There is also a clear vinyl window at the rear of the Cloak that provides the camera operator with a full view of controls. Features Triple-layer, waterproof & breathable materialNew design fits flat-screen monitor displaysClear vinyl window for tally light and camera controlsRain and snow protection for stadium cameras with ENG lensesHelps keep camera operator dry and warm

camRade wetSuit EFP Handheld Grey SKU: CAM-WS-EFP-HANDHELD-GREY The camRade wetSuit EFP Handheld Grey, is a waterresistant rain cover for a wide range of ENG style Handheld cameras. Designed to withstand the elements and made of a strong light grey fabric that allows you to blend into the background. The cover is perfect for use during music or sports events as well as documentary shoots, both indoor and outdoor. The monitor and controls as well as the viewfinder are protected by the cover while still fully accessible. The one-piece camRade wetSuit EFP Handheld wetsuit closes around the lens with hook and loop fasteners for a good seal with the camera. The back of the wetsuit offers room for use of multiple or larger batteries, but can easily be shortened with a strap so you will not be bothered by loose pieces of fabric. The microphone cover has hook and loop fasteners too, so the entire cover is easy to attach. This item is supplied in a waterproof pouch with zipper, which you can use for storage and transportation of the cover when not in active use. Key features Form-fitted for a wide range of ENG-style Handheld camerasTailor-made of water-resistant fabricProtection against bad weather conditionsEasy access to the controls, ports, memory cards, display, zoom, battery compartment and Triax camera adapterStrong Easy-on-Easy-off construction with hook and loop fastenersHandmade in France, Europe5 Year warranty

Porta Brace CLK-URSABC The CLK-URSABC offers complete weather protection for URSA Broadcast stadium cameras with ENG-style lenses and flat-screen monitor displays. The cover is made from waterproof Nylon Taslan material and complemented by a soft Tricot interior layer that protects the camera from rain and dust. In addition to being waterproof (1000MM waterproof rating) the Taslan material is breathable (1000G/M breathability rating), allowing heat from the camera to escape while the cover is deployed. Long sleeves and interior pockets for holding air-activated hand warmers help keep the camera operator dry and warm. Lots of zippers in all the right places make putting the Cloak on and taking it off easy to do, but still provide maximum protection. Nylon pull-ties cinch at all openings to help secure the Cloak around the camera and keep out unwanted rain, dust and other airborne particles. A clear vinyl window at the front of the Cloak allows the tally light to shine through. There is also a clear vinyl window at the rear of the Cloak that provides the camera operator with a full view of controls. Features Triple-layer, waterproof & breathable materialNew design fits flat-screen monitor displaysClear vinyl window for tally light and camera controlsRain and snow protection for stadium cameras with ENG lensesHelps keep camera operator dry and warm

camRade wetSuit EFP Handheld Black SKU: CAM-WS-EFP-HANDHELD-BL The camRade wetSuit EFP Handheld Black, is a waterresistant rain cover for a wide range of ENG-style Handheld cameras. Designed to withstand the elements and made of a flexible black fabric that minimizes unwanted sound effects caused by wind and rain. The cover is perfect for use during music or sports events as well as documentary shoots, both indoor and outdoor. The monitor and controls and viewfinder are protected by the cover and the controls are fully accessible. The one-piece wetsuit closes around the lens with hook and loop fasteners for a good seal with the camera. The back of the camRade wetSuit EFP Handheld wetsuit offers room for use of multiple or larger batteries, but can easily be shortened with a strap so you will not be bothered by loose pieces of fabric. The microphone cover has hook and loop fasteners too so the cover is easy to attach. This item is supplied in a waterproof pouch with zipper, which you can use for storage and transportation of the cover when not in active use. Key features Form-fitted for a wide range of ENG-style Handheld camerasTailor-made of water-resistant near silent fabricProtection against bad weather conditionsEasy access to the controls, ports, memory cards, display, zoom, battery compartment and Triax camera adapterStrong Easy-on-Easy-off construction with hook and loop fastenersHandmade in France, Europe5 Year warranty