Accsoon CineView 2 SDIThe Accsoon CineView 2 SDI is a next-generation 1080P wireless video transmission system featuring a massive 1500ft/450m range (line-of-sight). It offers even greater stability than its predecessors and an impressive latency of less than 50ms. The CineView 2 SDI uses the Accsoon Dual-Band transmission technology which takes the same video frame and sends it on both 2.4GHz and 5GHz frequencies at the same time for an inherently more stable wireless connectivity on set FeaturesHigh Reliability 2.4GHz+5GHz Dual-Band Transmission TechnologyExtreme Low Latency of Less Than 50msLong-Range Transmission Range Up to 1500ft/450mSDI & HDMI Input/Output, HDMI Loop-Out, UVC OutSDI to HDMI Pass-throughMonitoring on Up to 4 Devices, Mix and MatchSilent Fanless DesignPower with NP-F battery, DC or 5V 2A USB-C powerMonitoring Made Simple with Accsoon SEE AppAutomatic Channel Selection
Accsoon CineView Master 4K - Transmitter onlySKU: WIT07-TX The CineView Master 4K transmitter wirelessly transmits video and audio signals to the CineView Master 4K receiver, as well as to Android and iOS mobile devices via Wi-Fi. The CineView Master 4K's transmitter includes a USB-C Video Out port that can transmit both video and audio signals to iOS devices while simultaneously powering the connected device (5V/3A) via cable connection. Technical dataA/V Processor: 8K High Performance A/V ProcessorProtocol Accsoon Proprietary RTMS 4.0 ProtocolVideo Input: HDMI, 3G SDIVideo Output: HDMI Loop-OutHDMI Loop-out Format: Identical to the HDMI video inputDC Port: 5.5mmx2.1mm, center positiveDC Voltage: 7.4~16.8V Battery: Compatible with NP-F550, NP-F750, NP-F970Audio: 48KHz 16/20/24bitLatency: 1080p < 25ms / 4K < 35ms (Camera latency not included)Transmission Range: ≥ 2.5 km (No obstacles, no interference)OperatingEnvironment Temperature: -10~40°CPower Consumption: 6.5W average *Without powering other devicesDimensions: (Antennas Not Included) 130mm x 95mm x 32 mmWeight: (Antennas Not Included) 322gSDI Input Format1080p: 23.98/24/25/29.97/30/50/59.94/60fps Level A/B1080i: 50/59.94/60i720p: 50/59.94/60pHDMI Input Format4K (3840*2160): 23.98/24/25/29.97/30/50/59.94/60p1080p: 23.98/24/25/29.97/30/50/59.94/60p1080i: 50/59.94/60i720p: 50/59.94/60p
Accsoon Cineview SEThe CineView SE is a wireless video transmitter and receiver, with new best in class latency at under 50ms. The CineView SE can transmit a video source via SDI & HDMI up to 1080p 60fps inputs/outputs. It transmits the signal on 2.4GHz+5GHz Dual- Band frequencies simultaneously for increased signal stability and sends video at an impressive maximum range of 1200ft line-of-sight. Transmitter dataVideo Input: SDI/HDMISDI Input Format: 1080p 23.98/24/25/29.97/30/50/59.94/60fpsLevel: A/B 1080p 23.98/24/25/29.97/30/50/59.94/60fpsHDMI Input Format: 1080p 23.98/24/25/29.97/30/50/59.94/60fpsDC Port: 5.5mm x 2.1mm center positiveDC Voltage: 7.4~16.8VAudio: 44.1KHz/48KHz 16bit/24bit PCMLatency: <0.05s (Camera latency not included)OLED Display: 1.3inchTransmission Power: 17~20dBmTransmission Range: 1200ft (No obstacles, no interference)Power Consumption: 4.5Watt (Typical)Operating Environment Temperature: -10°C~40°C℃Dimensions: 105mm x 66mm x 32mm (Antennas not included)Weight: 210g (Antennas not included) Receiver dataVideo Output: SDI/HDMISDI Output Format: 1080p 24/25/30/50/60fps Level AHDMI Output Format: 1080p 24/25/30/50/60fpsDC Port: 5.5mm x 2.1mm center positiveDC Voltage: 7.4~16.8VOLED Display: 1.3inchPower Consumption: 3.5Watt (Typical)Operating Environment Temperature: -10°C~40°C℃Dimensions: 105mm x 66mm x 32mm (Antennas not included)Weight: 210g (Antennas not included)
Hollyland Pyro S TXPyro S is a groundbreaking addition to the Hollyland Pyro series lineup, which redefines wireless video transmission. Pyro S supports HDMI and SDI input/output and can transmit to up to four receivers simultaneously, with a range of up to 1,300ft (400m) and minimal latency of just 50ms. Pyro S uses advanced Auto Dual-Band Hopping (ADH) technology to ensure reliable transmission and features selectable modes for your real-world shooting needs. Lighter and more durable than traditional models, Pyro S’s magnesium alloy shell makes it easier to carry and handle. It’s ideal for multi-user monitoring in dynamic shooting scenarios, such as film production, live events, and ENG/EFP applications. Features 1 TX to 4 RXUp to 1300ft(400m)0.05S low latency2.4 GHz & 5 GHzADH (Auto Dual-Band Hopping)HDMI & SDIUVC & RTMP streaming4K30 transmissionIn the box1 x Pyro S Wireless Video Transmitter3 x Paddle Antenna (2.4 GHz & 5 GHz)1 x Rotatable Cold Shoe Mount1 x USB-C OTG Adapter1 x User Manual1 x Warranty Card1 x Packing List Card1 x Hollyland Ecosystem Leaflet
Teradek Bolt 6 LT TransmitterBolt 6 LT TX is a wireless video transmitter that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. =Bolt 6 LT TX offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode.The Transmitter is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).The 750 model includes V (vertical) Antennas. 1500 and MAX models include both V Antennas and H (horizontal) antennas. H Antennas are designed to maximize signal robustness in the most challenging RF environments.Optionally, the 750 model of Bolt 6 LT TX can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor. In the BoxBolt 6 LT 750 / 1500 / MAX TX - EXTERNAL Antenna1 x Bolt 6 LT 750 / 1500 / MAX TX1 x (Bit 118) 2pin Conn. to PowerTap 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft CableBolt 6 LT 750 TX - INTERNAL Antenna1 x Bolt 6 LT 750 TX Internal Antenna1 x 2pin to P-Tap Cable, 18in1 x 2pin to AC Adapter 18W, 6ft1 x SDI Cable, 10in1 x USB-C 2.0 Male to Male, 1m
Teradek Bolt 6 LT TransmitterBolt 6 LT TX is a wireless video transmitter that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. =Bolt 6 LT TX offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode.The Transmitter is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).The 750 model includes V (vertical) Antennas. 1500 and MAX models include both V Antennas and H (horizontal) antennas. H Antennas are designed to maximize signal robustness in the most challenging RF environments.Optionally, the 750 model of Bolt 6 LT TX can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor. In the BoxBolt 6 LT 750 / 1500 / MAX TX - EXTERNAL Antenna1 x Bolt 6 LT 750 / 1500 / MAX TX1 x (Bit 118) 2pin Conn. to PowerTap 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft CableBolt 6 LT 750 TX - INTERNAL Antenna1 x Bolt 6 LT 750 TX Internal Antenna1 x 2pin to P-Tap Cable, 18in1 x 2pin to AC Adapter 18W, 6ft1 x SDI Cable, 10in1 x USB-C 2.0 Male to Male, 1m
Teradek Bolt 6 LT TransmitterBolt 6 LT TX is a wireless video transmitter that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. =Bolt 6 LT TX offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode.The Transmitter is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).The 750 model includes V (vertical) Antennas. 1500 and MAX models include both V Antennas and H (horizontal) antennas. H Antennas are designed to maximize signal robustness in the most challenging RF environments.Optionally, the 750 model of Bolt 6 LT TX can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor. In the BoxBolt 6 LT 750 / 1500 / MAX TX - EXTERNAL Antenna1 x Bolt 6 LT 750 / 1500 / MAX TX1 x (Bit 118) 2pin Conn. to PowerTap 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft CableBolt 6 LT 750 TX - INTERNAL Antenna1 x Bolt 6 LT 750 TX Internal Antenna1 x 2pin to P-Tap Cable, 18in1 x 2pin to AC Adapter 18W, 6ft1 x SDI Cable, 10in1 x USB-C 2.0 Male to Male, 1m
Teradek Bolt 6 LT TransmitterBolt 6 LT TX is a wireless video transmitter that supports up to 1080p60 10-bit 422 HDR video over 3G-SDI, or 4K30 over HDMI. Bolt 6 uses Teradek’s patented Zero-Delay silicon chip to send wireless video over 5GHz and 6GHz radio frequencies. =Bolt 6 LT TX offers three line-of-sight options: 750 ft., 1500 ft., and the MAX model, which can be configured for up to 5,000 ft when using the optional Array Antenna and Broadcast Mode.The Transmitter is cross-compatible with the entire Bolt 4K Series – including Bolt 4K, Bolt 4K LT, and the Bolt 4K Monitor Modules – giving you the option to expand your workflow requirements. Link up to 6 receivers to one transmitter, or unlimited receivers when used in Broadcast Mode (available on MAX models).The 750 model includes V (vertical) Antennas. 1500 and MAX models include both V Antennas and H (horizontal) antennas. H Antennas are designed to maximize signal robustness in the most challenging RF environments.Optionally, the 750 model of Bolt 6 LT TX can include permanent internal antennas to allow for reliable zero-delay transmission in a more compact and durable form factor. In the BoxBolt 6 LT 750 / 1500 / MAX TX - EXTERNAL Antenna1 x Bolt 6 LT 750 / 1500 / MAX TX1 x (Bit 118) 2pin Conn. to PowerTap 18in/46cm Cable1 x SDI - BNC to BNC Cable, 10in1 x PSU 2pin Conn. to 18W AC Adapter (Int) - 6ft CableBolt 6 LT 750 TX - INTERNAL Antenna1 x Bolt 6 LT 750 TX Internal Antenna1 x 2pin to P-Tap Cable, 18in1 x 2pin to AC Adapter 18W, 6ft1 x SDI Cable, 10in1 x USB-C 2.0 Male to Male, 1m