SHAPE Pivoting mounting plate SKU: PMPW The SHAPE pivoting mounting plate is designed to mount portable wireless microphone, receivers, hard drive, wireless transmission system and other accessories to your camera. It can be mounted to any 1/4-20 or 3/8-16 threaded hole on your camera, cage, or cheese plate. It features an Anti-slip hook and loop buckle strap that cinches tight against your wireless receiver and presses into the deep rubber padded plate. It has a multiple 1/4-20 thread holes on top and bottom for extra secure attachment. The wireless receiver mounting plate has a friction pivoting angled bracket with multiple mounting possibility. By pivoting up and down it doesn’t obstruct any control button of your camera. The bracket for the mic receiver/accessories can be attached on the left or right side top or back of the camera. Key Features Attaches to Camera top plate or side plates. Supports Mic Receivers/Other Accessories CNC Lightweight anodise aluminum ¼-20 camera screw and 3/8 to 1/4 reducer Anti-slip hook and loop buckle strap
Teradek 2-Pin Lemo to 2-pin Lemo Cable Power cable for use with the Teradek Cube / Teradek Bolt / Teradek Bond 45 cm Cable - 2-Pin Lemo to 2-pin Lemo - 11-071990 cm Cable - 2-Pin Lemo to 2-pin Lemo - 11-0737
Teradek 2-Pin Lemo to 2-pin Lemo Cable Power cable for use with the Teradek Cube / Teradek Bolt / Teradek Bond 45 cm Cable - 2-Pin Lemo to 2-pin Lemo - 11-071990 cm Cable - 2-Pin Lemo to 2-pin Lemo - 11-0737
Teradek Antenna Array (Bolt 6 / Bolt 4K) The Antenna Array for Bolt 4K 4.9-7.3GHz interfaces with Bolt 4K to provide an extremely robust and uninterrupted directional signal at a range of up to 5,000ft. The Array offers a more resilient wireless transmission, especially in challenging RF conditions, by focusing the signal and reducing interference. Featuring a dedicated external omnidirectional antenna for increased reception when the signal is outside the directional cone of the panel array. As a result, you may achieve a boost in the reception range based on the maximum range of the connected Bolt4K. Features Focuses the wireless signal and reduces interference to achieve a boost in reception range (but not above max range of Bolt set)Composed of 3x16 dBi, 2x14 dBi, and 1x2dBi antennas using 5.1-7.3 GHz MIMO Small, Lightweight and made from UV-protected plastic with aluminum alloy Included Items Antenna Array V4 for Bolt 4K 5x 10cm Antenna Cable (RP-SMA Female to RP-SMA Female)1 x Standard Antenna (2dBi WiFi 2.4/5.8 GHz)
Teradek Antenna Array (Bolt 6 / Bolt 4K) The Antenna Array for Bolt 4K 4.9-7.3GHz interfaces with Bolt 4K to provide an extremely robust and uninterrupted directional signal at a range of up to 5,000ft. The Array offers a more resilient wireless transmission, especially in challenging RF conditions, by focusing the signal and reducing interference. Featuring a dedicated external omnidirectional antenna for increased reception when the signal is outside the directional cone of the panel array. As a result, you may achieve a boost in the reception range based on the maximum range of the connected Bolt4K. Features Focuses the wireless signal and reduces interference to achieve a boost in reception range (but not above max range of Bolt set)Composed of 3x16 dBi, 2x14 dBi, and 1x2dBi antennas using 5.1-7.3 GHz MIMO Small, Lightweight and made from UV-protected plastic with aluminum alloy Included Items Antenna Array V4 for Bolt 4K 5x 10cm Antenna Cable (RP-SMA Female to RP-SMA Female)1 x Standard Antenna (2dBi WiFi 2.4/5.8 GHz)
Teradek BIT-022 SKU: 11-0022 Teradek BIT-022 is a wireless Antenna (Antenna 2dBi WiFi 2.4/5.8 GHz) for Teradek Bolt Pro 2000 Receiver
Teradek BIT-118 2-Pin Lemo to PowerTap Cable SKU: 11-0119 Teradek 2-Pin Connector to PowerTap, 18inch Cable
Teradek Link AX Link AX is Teradek’s new production-ready Wi-Fi router that features Wi-Fi 6 and five configurable ethernet ports to give filmmakers the most flexibility possible. Unlike typical off-the-shelf routers, Link AX is designed with a ruggedized metal chassis and Gold/V-Mount battery mounting options to withstand the demands of any production, without adding yet another power drain to your DIT cart or video village. Link AX facilitates numerous workflows that connect productions from set, to remote collaborators, to post. Teradek Link AX expands your production networking capabilities with a ruggedized, set-ready aluminum chassis wrapped around a Wi-Fi 6 (802.11AX) router. Use Link AX for multiple workflow scenarios: more cameras and devices on your local production streaming network, camera-to-cloud for multiple cameras; simultaneous camera-control over multiple cameras. Product Highlights Expand your production networking capabilitiesWi-Fi monitoring with multiple Serv devices20 independent viewers using VUER HDR app Built for Production Wi-Fi monitoring with multiple Serv devices 20 independent viewers using VUER HDR app on mobile devicesAdd an internet connection to enable remote monitoring or camera-to-cloud workflowsSimultaneous control of multiple cameras over Wi-Fi Rugged Design Robust Aluminum ChassisGold-Mount and V-Mount Battery Plate Options 3/8” and 3/4”-20 Mounting Points 5 customizable ethernet portsUSB-A for cellular modems like Node II with Teradek Data In the box 1 x Link AX Wireless Access Point Router 5 Port (no mount / V-Mount / GOLD-Mount)1 x Lightstand Adapter 3/8in1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable
Teradek Link AX Link AX is Teradek’s new production-ready Wi-Fi router that features Wi-Fi 6 and five configurable ethernet ports to give filmmakers the most flexibility possible. Unlike typical off-the-shelf routers, Link AX is designed with a ruggedized metal chassis and Gold/V-Mount battery mounting options to withstand the demands of any production, without adding yet another power drain to your DIT cart or video village. Link AX facilitates numerous workflows that connect productions from set, to remote collaborators, to post. Teradek Link AX expands your production networking capabilities with a ruggedized, set-ready aluminum chassis wrapped around a Wi-Fi 6 (802.11AX) router. Use Link AX for multiple workflow scenarios: more cameras and devices on your local production streaming network, camera-to-cloud for multiple cameras; simultaneous camera-control over multiple cameras. Product Highlights Expand your production networking capabilitiesWi-Fi monitoring with multiple Serv devices20 independent viewers using VUER HDR app Built for Production Wi-Fi monitoring with multiple Serv devices 20 independent viewers using VUER HDR app on mobile devicesAdd an internet connection to enable remote monitoring or camera-to-cloud workflowsSimultaneous control of multiple cameras over Wi-Fi Rugged Design Robust Aluminum ChassisGold-Mount and V-Mount Battery Plate Options 3/8” and 3/4”-20 Mounting Points 5 customizable ethernet portsUSB-A for cellular modems like Node II with Teradek Data In the box 1 x Link AX Wireless Access Point Router 5 Port (no mount / V-Mount / GOLD-Mount)1 x Lightstand Adapter 3/8in1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable
Teradek Link AX Link AX is Teradek’s new production-ready Wi-Fi router that features Wi-Fi 6 and five configurable ethernet ports to give filmmakers the most flexibility possible. Unlike typical off-the-shelf routers, Link AX is designed with a ruggedized metal chassis and Gold/V-Mount battery mounting options to withstand the demands of any production, without adding yet another power drain to your DIT cart or video village. Link AX facilitates numerous workflows that connect productions from set, to remote collaborators, to post. Teradek Link AX expands your production networking capabilities with a ruggedized, set-ready aluminum chassis wrapped around a Wi-Fi 6 (802.11AX) router. Use Link AX for multiple workflow scenarios: more cameras and devices on your local production streaming network, camera-to-cloud for multiple cameras; simultaneous camera-control over multiple cameras. Product Highlights Expand your production networking capabilitiesWi-Fi monitoring with multiple Serv devices20 independent viewers using VUER HDR app Built for Production Wi-Fi monitoring with multiple Serv devices 20 independent viewers using VUER HDR app on mobile devicesAdd an internet connection to enable remote monitoring or camera-to-cloud workflowsSimultaneous control of multiple cameras over Wi-Fi Rugged Design Robust Aluminum ChassisGold-Mount and V-Mount Battery Plate Options 3/8” and 3/4”-20 Mounting Points 5 customizable ethernet portsUSB-A for cellular modems like Node II with Teradek Data In the box 1 x Link AX Wireless Access Point Router 5 Port (no mount / V-Mount / GOLD-Mount)1 x Lightstand Adapter 3/8in1 x PSU 2pin Conn. to 30W AC Adapter (Int) - 6ft Cable
Teradek Pro Battery Plates (Bolt 6 / Bolt 4K / Serv 4K) This Single Battery Plate from Teradek allows you to power your Bolt 6 / Bolt 4K Transmitter or Receiver, Bolt 6 LT / Bolt 4K LT Receiver, or Serv 4K using either Gold Mount or V-Mount battery plate. This plate offers one D-tap accessory output (50W - 14.4 Volt max).
Teradek Pro Battery Plates (Bolt 6 / Bolt 4K / Serv 4K) This Single Battery Plate from Teradek allows you to power your Bolt 6 / Bolt 4K Transmitter or Receiver, Bolt 6 LT / Bolt 4K LT Receiver, or Serv 4K using either Gold Mount or V-Mount battery plate. This plate offers one D-tap accessory output (50W - 14.4 Volt max).
Teradek Pro Battery Plates (Bolt 6 / Bolt 4K / Serv 4K) This Single Battery Plate from Teradek allows you to power your Bolt 6 / Bolt 4K Transmitter or Receiver, Bolt 6 LT / Bolt 4K LT Receiver, or Serv 4K using either Gold Mount or V-Mount battery plate. This plate offers one D-tap accessory output (50W - 14.4 Volt max).
Teradek Pro Battery Plates (Bolt 6 / Bolt 4K / Serv 4K) This Single Battery Plate from Teradek allows you to power your Bolt 6 / Bolt 4K Transmitter or Receiver, Bolt 6 LT / Bolt 4K LT Receiver, or Serv 4K using either Gold Mount or V-Mount battery plate. This plate offers one D-tap accessory output (50W - 14.4 Volt max).
TERADEK RF-X Auto-Switcher for Bolt 4K/6 and Ranger RXsThe Teradek RF-X (Radio Frequency Matrix) is an intelligent auto-switching system that continuously monitors up to six redundant Bolt or Ranger receivers (run over hardline SDI connections) and automatically selects the strongest available video signal.The result is a single, uninterrupted 12G-SDI output, even in the most congested RF environments. Built for broadcast, live events, and cine production, RF-X delivers the best possible video quality across complex signal paths, operating with zero delay and requiring zero user intervention. From sports and concerts to cine productions, RF-X thrives in chaotic RF environments. As cameras, talent, and obstacles move, RF-X automatically locks onto the strongest signal to keep your feed clean and uninterrupted. No manual switching and minimal to zero dropped frames or video degradation. Just reliable wireless performance when every moment counts.The RF-X is ideal for these applicationsEvents and StadiumsSteadicam or other long tracking shotsCar scenesHospital, Military, or Airport LocationsEven simple set ups with known RF interference Because fiber is immune to RF noise, ground loops, and other electrical interference, it provides an additional, highly reliable signal path, further protecting your video feed from signal loss or degradation. This fiber connection can extend video to off-set DIT carts, Video Village, additional video switchers, or ancillary routing systems, even across long distances. Two or more RF-X units can be linked over single-mode fiber using the RF-X's SFP port.FeaturesCombines Multiple Bolt or Ranger SDI outputs into a single SDI output (RF-X is compatible with all models of Bolt 4K, Bolt 6, and Ranger Series. You must use all Bolts or all Rangers. You can’t mix and match.)Automatically chooses the best input signal based on the RF StrengthIncreases coverage area by "networking" receiversRemoves the operator and equipment needed to switch multiple receiversMultiple RF-X units can be connected together via single-mode fiber using the SFP portConnectivity12G-SDI (6x Inputs, 2x Outputs)SFP (SDI Fiber) - connect 2 RF-X over fiber for extended range (SFP Module and Fiber Cable sold separately. Distances are based on SFP Module and can vary.)Ethernet for Web UI access and FirmwareUSB-C for Web UI access and Firmware
Teradek Wireless Camera Control Starter Kit for Bolt Owners of SmallHD Smart 7 monitors and Teradek Bolt 4K Transmitters and Receivers can now unlock Wireless Camera Control. Wireless Camera Control Starter Kit works with your products to create a cable-free setup, allowing you to control a variety of cameras at up to 5,000 feet. Compatible Cameras ARRI Alexa Mini, ALEXA Mini LF, AMIRA, RED KOMODO, V-RAPTOR, DSMC2, and Sony VENICE (coming soon) In the box 2x Wireless Camera Control Hubs for your Smart 7 Monitor1x Wireless Camera Control Adaptors for Transmitter1x Wireless Camera Control Adaptors for Receiver2x 5pin to 5pin cables A camera control license from SmallHD is required to use the Camera Control Starter Kit.
Teradek Wireless Camera Control Starter Kit for Bolt Owners of SmallHD Smart 7 monitors and Teradek Bolt 4K Transmitters and Receivers can now unlock Wireless Camera Control. Wireless Camera Control Starter Kit works with your products to create a cable-free setup, allowing you to control a variety of cameras at up to 5,000 feet. Compatible Cameras ARRI Alexa Mini, ALEXA Mini LF, AMIRA, RED KOMODO, V-RAPTOR, DSMC2, and Sony VENICE (coming soon) In the box 2x Wireless Camera Control Hubs for your Smart 7 Monitor1x Wireless Camera Control Adaptors for Transmitter1x Wireless Camera Control Adaptors for Receiver2x 5pin to 5pin cables A camera control license from SmallHD is required to use the Camera Control Starter Kit.