Wooden Camera Rod Clamp 19mm can attach to existing 19 mm rods to provide 1/4-20 and 3/8-16 mounting points. It can also be turned over and bolted to cheeseplates, cages, battery plates, and more. Extremely versatile, compact, and lightweight.
Includes
2 x 1/4-20 x 1/4" screws 2 x 1/4-20 x 3/4" screws
Technical data
Weight: 0.09 kg Dimensions: 15.7 cm x 3 cm x 1.5 cm
Wooden Camera WC V-Mount BMPCC4K (Blackmagic Pocket Cinema Camera 4K)
SKU: 264300
Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and Blackmagic Pocket Cinema Camera 4K connector. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm).
Specifications
Weight: 187gDimensions: 142.6 mm x 92.1 mm x 21.9 mm 2 x D-Tap ports for accessory powerCable length: 406.4mm
Wooden Camera Top Plate (F55, F5)
SKU: 163700
Wooden Camera Top Plate (F55, F5) is a top cheeseplate for the Sony F55 and F5 that contours to the shape of the camera body and leaves the vent area open. Original Sony focus hook can remain attached to camera. Stopper screw at front prevents accidental unlocking of FZ mount. Plate provides rows of 1/4-20 and 3/8-16 holes for attaching Handles, UVF Mount v2, Rod Clamps, and more. Additional screw holes allow attachment of original Sony F55 handle.
Top Plate Features
1/4-20 holes - in standard spacing (9mm center to center)3/8-16 holes - in ARRI standard spacing (50mm center to center)Includes 4 x 1/4-20 x 3/8 socket cap screws
Wooden Camera D-Box (Alexa Mini, V-Mount)
SKU: 209200
D-Box (Alexa Mini, V-Mount) is a custom version of the popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the ARRI Alexa Mini. Two 16 inch (40cm) cables exit the power plate with one going to the 8pin LEMO power plug and the other going to the 7pin EXT port. The bottom of the D-Box has (3) 1/4-20 holes which can attach directly to our Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). For an adjustable mount system, use the Battery Slide paired with the same Rod Clamps listed above.
This product Wooden Camera D-Box will attach to the ARRI BAP-1 and instructions on how to do this are included in the box.
Authentic IDX V-Mount plate provides 2x D-Tap (unregulated) and is hard wired to the D-Box. Inside the D-Box is a 10A fuse.
D-Box Slots Included
7 pin LEMO - EXT PortReplica of connector on rear of cameraMaintains functionality of external communication, R/S, and powerNote this slot is not swappable2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable4 pin Mini XLR - 12V InputHot swappable power input with included 7 inch pigtail cable for standard 4 pin XLR (12V nominal)Capable of providing power to accessories and camera with out brick battery attachedNote this slot is not swappable
Specifications
Weight 534 gDimensions 90 mm x 146 mm x 43mm
Wooden Camera WC V-Mount (XLR 4 Pin)
SKU: 179200
Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and standard 4 pin XLR power connector. Plate provides unregulated 12V power (12-16V depending on battery connected). Great for cameras like Blackmagic Studio Camera (BMSC), Panasonic GH4-YAGH, Sony F55/F5, AJA CION, and more.
2x D-Taps on plate provide 12-16V depending on battery connected.
Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm).
WC V-Mount (XLR 4 Pin) Technical data
Weight 234 gDimensions 142.4 mm x 90.8 mm x 21.3 mmCable length 40 cm
Wooden Camera Trigger Handle (RED Weapon / Scarlet-W / Raven)
SKU: 228000
Trigger Handle for RED Weapon, Scarlet Weapon, Raven cameras attaches without tools directly to the top of the camera brain or to the Easy Top (Weapon/Scarlet-W/Raven) to trigger the camera through the pogo interface.
Arrays of 1/4-20 holes in Red spacing, 3/8-16 holes for large accessories, and the ARRI standard accessory mount in several places. Attaches to top of camera by (2) 1/4-20 captured thumbscrews. Additionally, Rod Clamps can be attached to the front for a pass through top rod system.
Trigger Handle (RED Weapon / Scarlet-W / Raven) Includes
2 x 1/4-20 x captured thumbscrews
Wooden Camera D-Box Plus (ARRI Alexa Mini, V-Mount)
SKU: 253700
Die Wooden Camera D-Box Plus (ARRI Alexa Mini, V-Mount) ist eine Weiterentwicklung der sehr beliebten D-Box Alexa Mini. Die D-Box Plus (ARRI Alexa Mini, V-Mount) ist mit den Power-, EXT- und SDI-Anschlüssen der Kamera verbunden. Der DC-Eingang ist jetzt ein 4-poliger XLR-Anschluss in voller Größe und wird priorisiert, damit er zuerst verwendet werden kann und damit der eingebaute Akku vollständig geladen bleibt. Physikalische Sicherungen wurden durch einen prozessorgesteuerten Verstärkergrenzwert ersetzt, der mit dem Schiebeschalter auf der Bedienerseite auf 3,8, 5,8 oder 9 Ampere eingestellt werden kann. Sollte der Benutzer den eingestellten Strom für Zubehör überschreiten, werden nur die Zubehörausgänge deaktiviert, so dass die Kamera normal weiter läuft. Sobald die aktuelle Stromlast durch Entfernen von Zubehör oder Neukonfiguration reduziert wurde, kann die Reset-Taste gedrückt werden, um die Stromversorgung des Zubehörs wieder zu aktivieren. Die LEDs "DC IN" und "BATT" sind zwei LEDs. Dies bedeutet wenn die Batteriespannung über 12,5 V liegt, leuchtet die LED grün. Wenn die Batteriespannung unter 12 V liegt, leuchtet die LED rot. Wenn die Batteriespannung zwischen diesen Werten liegt, leuchtet die LED orange (rot + grün). Blinken kann während des Phasenübergangs auftreten. Anton Bauer Komponenten von höchster Qualität wurden in der V-Mount Montage verwendet und das Unibody Power Plate Design ist extrem haltbar und leicht.
Anschlüsse
1 x V-Mount-Netzteilplatte 3 x HD-SDI-Ausgänge 2 x HDMI-Ausgänge 2 x 3pin Fischer bei 24V mit Run / Stop - Regler eingebaut, um die Batteriespannung auf 24 V umzuwandeln - Maximaler 3A-Anstieg, 2,5 A, der zwischen den Anschlüssen geteilt wird 2 x 2pin LEMO bei 12V ungeregelt - ARRI Standardbelegung der Kabel 2 x D-Tap bei 12V ungeregelt 1 x 5V USB 1 x EXT-Anschluss - Kopie der Anschlüsse der Rückseite der Kamera - Behält die Funktionalität der externen Kommunikation für Starlite-Monitor, R / S und Stromversorgung bei 1 x 4pin XLR DC Eingang - Hot-Swapping mit integriertem Akku - Stromversorgung von Zubehör und Kamera ohne angeflanschten V-Mount Akku möglich
Kabel zur Kamera
1x 8pin LEMO-kompatibles Kabel (16 Zoll) 1x 7pin LEMO-kompatibles Kabel (16 Zoll) 1x HD-SDI-Kabel (16 Zoll) Der Boden der D-Box hat (2) 1 / 4-20 Gewinde, die direkt an den Wooden Camera Battery Swing Bracket Only (für D-Box Plus), Rod Clamp (15mm LW), Rod Clamp (15mm Studio) und Stangenklemme (19mm) passen.
Verwenden Sie für ein verstellbares Befestigungssystem den Akkuhalter. Dieses Produkt kann an den ARRI BAP-1 angeschlossen werden (siehe hierzu die Anweisungen dazu, die in der Verpackung enthalten sind). Die in dieser Baugruppe verwendeten Steckverbinder werden nicht von LEMO hergestellt, sondern entsprechen den gleichen Spezifikationen und sind LEMO-kompatibel.
Spezifikationen
Gewicht: 640 Gramm Abmessungen: 114,4 x 146 x 43 mm
Wooden Camera WC Pro V-Mount BMPCC4K
SKU: 265500
WC Pro V-Mount (Blackmagic Pocket Cinema Camera 4K, BMPCC4K) ist eine Metall-Stromversorgungsplatte, die in Zusammenarbeit mit Anton Bauer entwickelt wurde. Sie verfügt über ein robustes Aluminiumgehäuse für Langlebigkeit und sichere Batteriebefestigung sowie einen Gleichstromanschluss, der mit der Blackmagic Pocket Cinema Camera 4K kompatibel ist. Sie verfügt über 3 D-Taps für die Stromversorgung von Zubehör bei Batteriespannung (12-16 V), eine digitale Sicherung mit Reset-Taste, eine hintere Abdeckplatte und unverlierbare Befestigungsschrauben.Das Kabel tritt auf der rechten Seite der Platte aus und lässt sich sauber in die Kamera einführen. Die Länge des Kabels erlaubt einen minimalen Kabelüberstand und ermöglicht es, bei Bedarf auch weiter von der Kamera entfernte Positionen zu erreichen. Für ein verstellbares Montagesystem, das an Stangen befestigt wird, verwenden Sie den Battery Slide oder Recorder Slide in Kombination mit der entsprechenden Rod Clamp:
Rod Clamp (15mm LW), Rod Clamp (15mm Studio) und Rod Clamp (19mm). Gewicht: 187gAbmessungen: 142,6 mm x 92,1 mm x 21,9 mmKabellänge: 406,4 mm
Wooden Camera 19mm Rod
19mm diameter, hard anodized, thick walled, aluminum iris rods used for mounting accessories like follow focus, matte box, lens support, servo motors, and more.
ACHTUNG! Dieser Artikel wird einzeln verkauft. Für ein Paar im Set bitte 2 Stück in den Warenkorb legen.
19mm Rod Available in lengths
3" / 7.62 cm6" / 15.24 cm9" / 22.86 cm12" / 30.48 cm15" / 38.1 cm18" / 45.72 cm24" / 60.96 cm
Wooden Camera D-Box (Alexa Mini, Gold Mount)
SKU: 209100
D-Box (Alexa Mini, Gold Mount) is a custom version of popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the ARRI Alexa Mini. Two 16 inch (40cm) cables exit the power plate with one going to the 8pin LEMO power plug and the other going to the 7pin EXT port.
The bottom of the D-Box has (3) 1/4-20 holes which can attach directly to Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm). For an adjustable mount system, use the Battery Slide paired with the same Rod Clamps listed above. Wooden Camera D-Box will attach to the ARRI BAP-1 and instructions on how to do this are included in the box.
Authentic Anton Bauer plate provides 1x D-Tap (unregulated) and is hard wired to the D-Box.
D-Box Slots Included
7 pin LEMO - EXT PortReplica of connector on rear of cameraMaintains functionality of external communication, R/S, and powerNote this slot is not swappable2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)2 pin LEMO - 12V UnregulatedARRI standard wiringThis slot can be swapped for Hirose, 4pin LEMO, or D-Tap (note that only 1x D-Tap can occupy slot 2 or 3)3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable3 pin Fischer - 24V RegulatedRegulator built in to convert battery voltage to 24VMaximum 3A shared between slot 4/5Note this slot is not swappable4 pin Mini XLR - 12V InputHot swappable power input with included 7 inch pigtail cable for standard 4 pin XLR (12V nominal)Capable of providing power to accessories and camera with out brick battery attachedNote this slot is not swappable
Specifications
Weight 534 gDimensions 90 mm x 146 mm x 43mm
Wooden Camera WC V-Mount (C100, C300, C500)
SKU: 177000
Wooden Camera brand V-Mount plate utilizing an IDX V-Mount and C-Series DC connector. Works with
Canon C100Canon C300Canon C500
Voltage regulator integrated in the plate provides constant 8.4V to camera.
2x D-Taps on plate provide 12-16V depending on battery connected.
Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm).
Weight 178 gDimensions 142.4 mm x 90.8 mm x 21.3 mmLength 40cm
Wooden Camera WC V-Mount (Sony FS7, FS5, Panasonic EVA-1)
SKU: 194200
Wooden Camera WC V-Mount (Sony FS5, FS7) utilizing an IDX V-Mount and Sony PXW-FS7 DC connector. This model also works with Sony EX3 cameras. Cable exits the right side of the plate allowing neat looping and insertion into the camera. Length allows minimal cable excess while still being able to reach positions further away from the camera as necessary. For an adjustable mount system attached to rods, use the Battery Slide or Recorder Slide paired with the appropriate Rod Clamp: Rod Clamp (15mm LW), Rod Clamp (15mm Studio), and Rod Clamp (19mm).
2x D-Tap ports for accessory powerCable length: 380mmWeight: 187gDimensions: 142.6 mm x 92.1 mm x 21.9 mm
Wooden Camera Battery Slide (Panasonic EVA-1)
SKU: 254200
Wooden Camera Battery Slide (Panasonic EVA-1) is an adjustable mounting system for attaching the WC V-Mount (Panasonic EVA-1) or WC Gold Mount (Panasonic EVA-1) directly to the side of the Wooden Camera Top Plate (Panasonic EVA) via the ARRI accessory mount.
Apply firm pressure to tilt the plate in place and access HD-SDI and other ports on the camera back. Loosen the thumbscrew to slide the plate up and down and also tilt. Great for adjusting counterbalance and for transitioning from studio to handheld mode.
For a rod based solution, instead choose the standard Battery Slide and combine with Rod Clamp (15mm LW), Rod Clamp (19mm), or Rod Clamp (15mm Studio).
Includes
4 x M3 x 12mm Pan Head Screws4 x M3 x 8mm Pan Head Screws4 x M3 x 8mm Phillips Flat Head Screws
Specifications
Weight: 226.80g Dimensions: 152.4 mm x 114.3 mm x 45.7 mm
Wooden Camera 15mm Tube Clamp
SKU: 160700
15mm Tube Clamp for the UVF Mount v2 and UVF Mount. Slotted screw pattern allows attaching to holes between 25mm and 36mm apart center to center.
Wooden Camera Rod Clamp (15mm LW)
SKU: 150200
Rod Clamp (15mm LW) can attach to existing 15mm rods to provide 1/4-20 mounting points. It can also be turned over and bolted to cheeseplates, cages, battery plates, and more. Extremely versatile, compact, and lightweight.
Includes
2 x 1/4-20 x 1/4" screws2 x 1/4-20 x 3/4" screws
Technical data
Weight: 90 gDimensions: 11,17 cm x 2,54 cm x 1,52 cm
98,00 €*
Brutto: 116,62 €
Zahlen Sie mit:
Wir versenden mit:
Schneller Versand
Persönliche Beratung und Showroom vor Ort
Bequemer Kauf auf Rechnung
Hotline 0211 930 730-33
Funktionale Cookies sind für die Funktionalität des Webshops unbedingt erforderlich. Diese Cookies ordnen Ihrem Browser eine eindeutige zufällige ID zu damit Ihr ungehindertes Einkaufserlebnis über mehrere Seitenaufrufe hinweg gewährleistet werden kann.
Maschinenkennung:
Sicherheitstoken zur identifizierung der maschine.
Stripe orig props:
Stripe-referrer-informationen.
Private maschinenkennung:
Sicherheitstoken zum identifizieren des privaten computers.
Private maschinenkennung:
Sicherheitstoken zum identifizieren des privaten computers.
Stripe orig props:
Stripe-referrer-informationen.
Private maschinenkennung:
Sicherheitstoken zum identifizieren des privaten computers.
Site-auth:
Stripe-authentifizierungscookie.
Stripe csrf:
CSRF-token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
Private maschinenkennung:
Sicherheitstoken zum identifizieren des privaten computers.
Site-auth:
Stripe-authentifizierungscookie.
Stripe csrf:
CSRF-token.
Site-auth:
Stripe-authentifizierungscookie.
Stripe csrf:
CSRF-token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
Site-auth:
Stripe-authentifizierungscookie.
Stripe csrf:
CSRF-token.
stripe-payments.stripe_pm.name:
stripe-payments.stripe_pm.description
Amazon Pay
CSRF-Token:
Das CSRF-Token Cookie trägt zu Ihrer Sicherheit bei. Es verstärkt die Absicherung bei Formularen gegen unerwünschte Hackangriffe.
PayPal-Zahlungen
CAPTCHA-Integration
Zeitzone:
Das Cookie wird verwendet um dem System die aktuelle Zeitzone des Benutzers zur Verfügung zu stellen.
Herkunftsinformationen:
Das Cookie speichert die Herkunftsseite und die zuerst besuchte Seite des Benutzers für eine weitere Verwendung.
Session:
Das Session Cookie speichert Ihre Einkaufsdaten über mehrere Seitenaufrufe hinweg und ist somit unerlässlich für Ihr persönliches Einkaufserlebnis.
Cookie Einstellungen:
Das Cookie wird verwendet um die Cookie Einstellungen des Seitenbenutzers über mehrere Browsersitzungen zu speichern.
Amazon Pay:
Das Cookie wird für Zahlungsabwicklungen über Amazon eingesetzt.
Aktivierte Cookies:
Speichert welche Cookies bereits vom Benutzer zum ersten Mal akzeptiert wurden.
Cache Behandlung:
Das Cookie wird eingesetzt um den Cache für unterschiedliche Szenarien und Seitenbenutzer zu differenzieren.
Sendinblue:
Sendinblue tracker
Erlaubt es Google, personenbezogene Daten für Online-Werbung und Marketing zu sammeln.
Google Werbung und Marketing
Google Werbung und Marketing
Google Werbung und Marketing
Service Cookies werden genutzt um dem Nutzer zusätzliche Angebote (z.B. Live Chats) auf der Webseite zur Verfügung zu stellen. Informationen, die über diese Service Cookies gewonnen werden, können möglicherweise auch zur Seitenanalyse weiterverarbeitet werden.
Doofinder:
Das Cookie wird verwendet um Benutzerinteraktionen mit der Seitensuche zu verfolgen. Die Daten können für Optimierungen der Suchfunktion genutzt werden.
YouTube-Video
YouTube-Video
YouTube-Video
Merkzettel
Local Storage:
Speichert einen Zeitstempel um Elemente auf Wunsch für eine gewisse Zeit ausblenden zu können.
Tracking Cookies helfen dem Shopbetreiber Informationen über das Verhalten von Nutzern auf ihrer Webseite zu sammeln und auszuwerten.
Google Analytics:
Google Analytics wird zur der Datenverkehranalyse der Webseite eingesetzt. Dabei können Statistiken über Webseitenaktivitäten erstellt und ausgelesen werden.
Google Analytics:
Cookie von Google für Website-Analysen. Erzeugt statistische Daten darüber, wie der Besucher die Website nutzt.
Marketing-Cookies werden von Drittanbietern oder Verlegern verwendet, um personalisierte Werbung anzuzeigen. Sie tun dies, indem sie die Besucher auf den Webseiten verfolgen.
Google Ads:
Dieses Cookie wird gesetzt, wenn ein User über einen Klick auf eine Google Werbeanzeige auf die Website gelangt. Es enthält Informationen darüber, welche Werbeanzeige geklickt wurde, sodass erzielte Erfolge wie z.B. Bestellungen oder Kontaktanfragen der Anzeige zugewiesen werden können.
Google Ads:
Werbung Targeting
Google AdSense:
Das Cookie wird von Google AdSense für Förderung der Werbungseffizienz auf der Webseite verwendet.
Bing Ads:
Das Bing Ads Tracking Cookie wird verwendet um Informationen über die Aktivität von Besuchern auf der Website zu erstellen und für Werbeanzeigen zu nutzen.
Für Statistiken und Shop-Performance-Metriken genutzte Cookies.
Google Tag Manager:
Cookie von Google zur Steuerung der erweiterten Script- und Ereignisbehandlung.
Wir respektieren Ihre Privatsphäre
Diese Website verwendet Cookies, um Ihnen die bestmögliche Funktionalität bieten zu können... Mehr Informationen.