Wooden Camera C-Box (Converter, D-Tap)
550,00 €*
Brutto: 654,50 €
Wooden Camera C-Box (Converter, D-Tap)
SKU: 176200
C-Box (Converter, D-Tap) accepts HDMI and 3G HD-SDI input, selectable via switch on operator's side, and outputs simultaneously three channels of HD-SDI and two of HDMI. The device draws power from the D-Tap of a battery or battery plate using the included cable. Each video output is independently reclocked and carries the same signal strength as the original. LED indicators are located on the operator's side to show status of power and signal. This version attaches between any V-Mount or QRC-style Gold Mount and wherever the plate was attached previously. For example, the Wooden Camera C-Box (Converter, D-Tap) can fit between the WC V-Mount (Epic/Scarlet) and the Quick Back v2. Another example would be attaching it between the WC Gold Mount (BMC) and the Battery Slide.
C-Box Overview
Power Input 4 pin mini-XLR, 12-24 VDC .5AIncluded 4" D-Tap to 4 pin mini-XLR cableLED indicator for Signal and Power on operator sideBolts to standard V-Mount, QRC-style Gold Mount, and RED/Blueshape mounting patternsStandard V-Mount, QRC-style Gold Mount, and RED/Blueshape plates can be bolted to the box itself1/4-20 holes on bottom allow for attachment of rod clamps, cheeseplates, and other accessoriesRe-clocks standard SD, HD and 3G SDI data ratesAuto bypasses non-standard SDI rates from 20Mbit/s to 3Gbit/sPasses SDI embedded audio and ancillary dataOperating Temperature 0 to +40 COperating Humidity 0 to 90% Non-Condensing
Signal Information
Data Types: SMPTE 259/292/424Data Rates: 19 Mbit/s through 3.0 Gbit/sRe-clocking Data Rates: 270 Mbit/s, 1.485 Gbit/s, 2.97 Gbit/sInput/Output Return Loss: > 15dB @ HD, > 12dB @ 3GInput Level: 800 mV P-P +/- 20%Input Impedance: 75 Ohms +/- 1%Output Level: 800 mV P-P +/- 5%Output Impedance: 75 Ohms +/- 1%Output Jitter: < 0.2 UI
Other Notes
A/C Adapter included2 positions available for mounting QRC-style power plates: high and lowHole pattern available for mounting common accessory V mount4 pin mini-XLR power connector same as TV Logic/Alphatron
Versandkostenfrei
Wooden Camera C-Box (Converter, Gold Mount)
635,00 €*
Brutto: 755,65 €
Wooden Camera C-Box Converter Gold Mount
SKU: 176400
C-Box (Converter, Gold Mount) accepts HDMI and 3G HD-SDI input, selectable via a switch on the operator's side, and simultaneously outputs three channels of HD-SDI and two of HDMI. The device draws power internally from the male Gold Mount plate attached and passes power through to the camera via the female Gold Mount plate on the other side. The male Gold Mount plate has an additional D-Tap output for accessory power. Each HD-SDI output is independently reclocked and carries the same strength as the original signal. LED indicators are located on the operator's side to show status of power and signal. 5V Mini USB port on operator's side for powering wireless transmitters like Paralinx, IDX Cam-Wave, etc. This version of Wooden Camera C-Box attaches between any Anton Bauer QRC size Gold Mount plate and Gold Mount battery. For example, the C-Box (Converter, Gold Mount) can fit between an Anton Bauer Dionic HC battery and the QB Anton Bauer (QRC-EPIC).
Overview
Power input via Gold Mount battery, 12-24 VDC .5AAttaches between standard Gold Mount battery and camera Gold Mount plateLED indicator for Signal and Power on operator side5V mini USB output for accessory power1/4-20 holes on bottom allow for attachment of rod clamps, cheeseplates, and other accessoriesRe-clocks standard SD, HD and 3G SDI data ratesAuto bypasses non-standard SDI rates from 20Mbit/s to 3Gbit/sPasses SDI embedded audio and ancillary dataOperating Temperature 0 to +40 COperating Humidity 0 to 90% Non-Condensing
Signal Information
Data Types SMPTE 259/292/424Data Types 19 Mbit/s through 3.0 Gbit/sRe-clocking Data Rates 270 Mbit/s, 1.485 Gbit/s, 2.97 Gbit/sInput/Output Return Loss > 15dB @ HD, > 12dB @ 3GInput Level 800 mV P-P +/- 20%Input Impedance 75 Ohms +/- 1%Output Level 800 mV P-P +/- 5%Output Impedance 75 Ohms +/- 1%Output Jitter< 0.2 UI
Wooden Camera C-Box (Converter, V-Mount)
699,00 €*
Brutto: 831,81 €
Wooden Camera C-Box Converter V-Mount
SKU: 176300
Die C-Box (Konverter, V-Mount) akzeptiert HDMI- und 3G HD-SDI-Eingänge, die über einen Schalter auf der Bedienerseite ausgewählt werden können, und gibt gleichzeitig drei HD-SDI-Kanäle und zwei HDMI-Kanäle aus. Das Gerät wird intern über die angebrachte V-Mount-Steckerplatte mit Strom versorgt und leitet den Strom über die V-Mount-Buchsenplatte auf der anderen Seite an die Kamera weiter. Die männliche V-Mount-Platte verfügt über einen zusätzlichen D-Tap-Ausgang für die Stromversorgung von Zubehör. Jeder HD-SDI-Ausgang ist unabhängig voneinander neu getaktet und hat die gleiche Signalstärke wie das Originalsignal. Auf der Bedienerseite befinden sich LED-Anzeigen, die den Status der Stromversorgung und des Signals anzeigen. 5V-Mini-USB-Anschluss auf der Bedienerseite für die Stromversorgung von drahtlosen Sendern wie Paralinx, IDX Cam-Wave, usw.
Wooden Camera C-Box Converter V-Mount wird zwischen einer beliebigen V-Mount-Platte und einem V-Mount-Akku angebracht. Zum Beispiel kann die C-Box (HD-SDI, V-Mount) zwischen dem Blueshape BV090 Akku und dem WC V-Mount (Epic/Scarlet) angebracht werden. Ein anderes Beispiel wäre die Anbringung zwischen der Blueshape BV090 Battery und dem WC V-Mount (BMC).
C-Box Converter V-Mount Übersicht der Merkmale kompakt im Überblick
Stromzufuhr über V-Mount-Akku, 12-24 VDC .5AWird zwischen Standard-V-Mount-Batterie und Kamera-V-Mount-Platte angebrachtLED-Anzeige für Signal und Strom auf der Bedienerseite5-V-Mini-USB-Ausgang für die Stromversorgung von Zubehör1/4-20-Löcher an der Unterseite ermöglichen die Befestigung von Stabklemmen, Käseplatten und anderem ZubehörRe-Taktung von Standard-SD-, HD- und 3G-SDI-DatenratenAutomatische Umgehung von nicht standardmäßigen SDI-Raten von 20Mbit/s bis 3Gbit/sLässt eingebettete SDI-Audio- und -Zusatzdaten durchBetriebstemperatur 0 bis +40 CLuftfeuchtigkeit bei Betrieb 0 bis 90 % nicht-kondensierend
Detaillierte Signal-Informationen
Datenarten SMPTE 259/292/424Datentypen 19 Mbit/s bis 3,0 Gbit/sRe-Clocking Datenraten 270 Mbit/s, 1,485 Gbit/s, 2,97 Gbit/sEingangs-/Ausgangsrückflussdämpfung > 15dB @ HD, > 12dB @ 3GEingangspegel 800 mV P-P +/- 20%Eingangsimpedanz 75 Ohm +/- 1%Ausgangspegel 800 mV P-P +/- 5%Ausgangsimpedanz 75 Ohm +/- 1%Ausgangs-Jitter< 0,2 UI
Wooden Camera C-Box Wireless HDMI Protector
64,00 €*
Brutto: 76,16 €
Wooden Camera C-Box Wireless HDMI Protector
SKU: 183700
C-Box Wireless HDMI Protector attaches to the C-Box (Converter) line of products and protects your wireless HDMI transmitter connections from being bumped or broken. The Protector attaches via two screws making it very secure and the side cutout allows for the 5v mini USB cable included with the main C-Box unit to be inserted. Works with Paralinx Arrow, IDX Cam-Wave, etc.
C-Box Wireless HDMI Protector Overview
Attaches via two M3 socket cap screwsCompatible transmitters: Paralinx Arrow, IDX Cam-Wave, Nyrius, CMR Radian, and other similarly sized devicesSide slot for inserting 5v mini USB cableBolts to C-Box (Converter, D-Tap), C-Box (Converter, V-Mount), and C-Box (Converter, Gold Mount)
Includes
2 x M3x5mm Socket Cap Screws