Entaniya Canon EF-Mount Adapter for Fisheye HAL250 4.3mm
SKU: MB-M1-EF
Entaniya EF-Mount Adapter is designed for Fisheye HAL250 4.3mm. Entaniya Mount Adapter made by SUS304 is for holding lens. It could be compared to an engine cylinder. If you hold it, you will be surprised about how light it is for sure.
Entaniya Fisheye 220
SKU: 4902129001004
The Entaniya Fisheye Series has features beyond any regular lens. The Entaniya Fisheye allows you to take unique wide-angle pictures because it takes photographs beyond it's field of vision.
The radius captured by Entaniya Fisheye utilizes a CMOS Sensor to the maximum.
Entaniya Fisheye 220 and 250 degrees capture a wide radius that is best for a panoramic VR in a 1/2.3 CMPS Sensor.
Using a standard 180 degree fisheye lens that is not able to capture the higher and lower aspects of an image, these parts will be missing when converted into a panoramic.
The Entaniya Fisheye 220 and 250 will be able to capture these images at approximately 190 degrees so that the images always come out as a flawless, seamless panoramic VR.
Mounting confirmed cameras
GoPro HERO4 BLACK (with RIBCAGE)GoPro HERO4 BLACK (direct mounting)Xiaomi Yi (direct mounting)SJcam SJ5000 (direct mounting)SJcam SJ5000x Elite (direct mounting)Pentax Q S-1 (remove a IR cut filter and a Q-CS mount required)
Technical data
FOV 220 degreesMount Type M12 P0.5Projection EquidistantAperture ratio F/2.0Lenses10 Element GlassLens ED x 1Image circle diamete:5.1mm:(220° x 220°)AR coated○Manufactured Made in Japan (except:caps)Weight 52 g (without caps)
In the box
CS Mount AdapterIR Cut FilterAllen wrenchBolts
Entaniya Fisheye 250
SKU: 4902129001011
The Entaniya Fisheye Series has features beyond any regular lens. The Entaniya Fisheye allows you to take unique wide-angle pictures because it takes photographs beyond it's field of vision.
The radius captured by Entaniya Fisheye utilizes a CMOS Sensor to the maximum.
Entaniya Fisheye 220 and 250 degrees capture a wide radius that is best for a panoramic VR in a 1/2.3 CMPS Sensor.
Using a standard 180 degree fisheye lens that is not able to capture the higher and lower aspects of an image, these parts will be missing when converted into a panoramic.
The Entaniya Fisheye 250 will be able to capture these images at approximately 190 degrees so that the images always come out as a flawless, seamless panoramic VR.
Mounting confirmed cameras
GoPro HERO4 BLACK (with RIBCAGE)GoPro HERO4 BLACK (direct mounting)Xiaomi Yi (direct mounting)SJcam SJ5000 (direct mounting)SJcam SJ5000x Elite (direct mounting)Pentax Q S-1 (remove a IR cut filter and a Q-CS mount required)
Technical data
FOV 250 degreesMount Type M12 P0.5Projection EquidistantAperture ratio F/2.8Lenses 11 Element Glass
LensED x 1SHR x 2
Image circlediamete:5.5mm:(250° x 250°)AR coated○Manufactured Made in Japan (except:caps)Weight 79 g (without caps)
In the box
CS Mount AdapterIR Cut FilterAllen wrenchBolts
Entaniya Fisheye HAL 200 3.6mm
Entaniya Fisheye HAL 200 lens is the highest quality fisheye lens ever in the world. This lens has been designed and invented by Entaniya. The lens has a 200-degree angle of view but has few aberrations and a very little fringe so it can provide an unbelievably sharp quality even if compared to other fisheye lenses.
Entaniya Fisheye HAL consists of three parts: a front lens, a back lens and a mount adapter. All the parts can be exchanged depending on the purpose of the lens.
Fisheye HAL 200 3.6mm technical data
Focal Length: 3.6mm Field of View(4/3″: 200°(h:200°/v:200°) Lens Construction: 17 Elements in 11 Groups / 4 Extra-low dispersion lensesF Number: f=3.6mm F/4 / F5.6 / F8 (Interchangeable parts) Image Size: 180°=φ11mm200°=φ12mm Mount Types: Sony E / MFT / C-Mount Parts contained: Tripod mount ring / ND filters (0.6/1.2) one each / Apertre Rings(F2.8/F5.6/F8/F11) Apertre Rings: Compatible with HAL 200 3.6 and HAL 250 2.3 and 3.0 ND filters: Compatible with HAL 200 3.6 and HAL 250 2.3 and 3.0 and 3.6 Parts contained: Made in Japan(except:caps)Weight: 860g (E-mount)
Entaniya Fisheye M12 280
SKU: 4902129001028
The Fisheye lens has 280 degree field of view.
The Entaniya Fisheye Series has features beyond any regular lens. The Entaniya Fisheye allows you to take unique wide-angle pictures because it takes photographs beyond it's field of vision.
The radius captured by Entaniya Fisheye utilizes a CMOS Sensor to the maximum.
Entaniya Fisheye 220 and 250 degrees capture a wide radius that is best for a panoramic VR in a 1/2.3 CMPS Sensor.
Using a standard 180 degree fisheye lens that is not able to capture the higher and lower aspects of an image, these parts will be missing when converted into a panoramic.
The Entaniya Fisheye 220 and 250 will be able to capture these images at approximately 190 degrees so that the images always come out as a flawless, seamless panoramic VR.
Mounting confirmed cameras
GoPro HERO4 BLACK (with RIBCAGE)GoPro HERO4 BLACK (direct mounting)Xiaomi Yi (direct mounting)SJcam SJ5000 (direct mounting)SJcam SJ5000x Elite (direct mounting)Pentax Q S-1 (remove a IR cut filter and a Q-CS mount required)
Fisheye 280 Technical data
FOV 280 degreesMount Type M12/P0.5Projection Equisolid angleAperture ratio F/2.8Lenses 12 Element GlassLens ED x 1, SHR x 3Image circlediamete:4.2mm:(280° x 280°)AR coated○Manufactured Made in Japan(except:caps)Weight 175g(without caps)
In the box
CS Mount AdapterIR Cut FilterAllen wrenchBolts
Entaniya HAL 200 6.0mm
Brennweite, die einen Bildkreis von 180 Grad mit einem Seitenverhältnis von 16:9 auf einem Vollformatsensor abdeckt.
Technische Daten
Brennweite: 6,0 mmBildwinkel: 200°Linsen-Konfiguration: 17 Linsen in 12 Gruppen / 4 Linsen mit extra niedriger DispersionBlendenzahl: F/4.0(Feststehend) Auswechselbare Teile: F5.6 / F8 / F11Bildgröße: 180° = φ18.2mm / 200° = φ19.9mmAnschlussarten: EF(EF-Mount1)/ E(E-Mount4) / MFT(MFT-Mount2)Hergestellt in Japan(außer: Kappen)Gewicht: EF Mount: 790g / E / MFT :950gVerfügbare Mounts (Bitte spezifizieren bei der Bestellung):Sony E-MountCanon EF MountMFT (Micro 4/3)
Hinweis
Für die Montage des Objektivs an der RED DSMC2 benötigen Sie eine Halterung, die ausschließlich für EF-Mount geeignet ist, und nehmen Sie den Filter vor dem Sensor ab. Das Entaniya Fisheye HAL 250 hat einen Filter, der dem RED-Filter ähnelt.Wenn Sie das Objektiv an der Blackmagic URSA mini 4.6K anbringen, müssen Sie den IR-Sperrfilter entfernen, der dem Sensor im Weg ist, den EF-Mount verwendet.Das EF-Mount-Objektiv kann nicht an DSLR-Kameras wie der CANON 5D angebracht werden, da die Rückseite des Objektivs eine Beule hat.
Im Lieferumfang enthalten
1 x Objektivstütze (bei EF-Mount-Version nicht enthalten)1 x Unterlegscheiben (Schims) (F5.6 / F8.0 / F11), je ein Stück1 x ND-Filter-Set (0,6 / 1,2), je ein Stück1 x Blendenwerkzeug A1 x Blendenwerkzeug B1 x Inbusschlüssel 2mm1 x Inbusschlüssel 3mm1 x Inbusschlüssel 4mm1 x HAL Objektiv Benutzerhandbuch1 x HAL Backfocus Handbuch1 x Garantiekarte
Entaniya Fisheye 250 HAL 4.3
Entaniya Fisheye HAL250 lens is a high quality and wide fisheye lens beyond compare in the whole word.
This Fisheye HAL250 lens has been designed and invented by Entaniya. With Entaniya lens of 250-degree, we have greatly exceeded the general 180-degree lens.
Even though the lens is as wide as 250-degree, it has very few aberrations and little fringe which allows it to provide a sharp quality that cannot even be compared to other fisheye lenses.
Entaniya Fisheye HAL consists of three parts: front lens, a back lens and a mount adapter. All the parts can be exchanged depending on the purpose of the lens.
By installing Entaniya Fisheye HAL250 lens to a camera, you can shoot perfect 360-degree footage which covers horizontal 250-degree (vertical length depends on cropping) with only one shot. By using a composition of two cameras with the exclusive rig, you can create perfect 360 footage. Also, if you increase the number of cameras, you will get even higher resolution.
Special lens
The pipe of Entaniya Fisheye HAL250 lens is made of titanium. In the case of super wide angle of view lens, it is not possible to make the metal around the lens thin no matter what you do.Entaniya uses materials equal to those to those used for the aerospace. Entaniya demands 50μ machining accuracy. The band which holds Entaniya Fisheye HAL250 is also made of titanium.Entaniya HAL lensis larger than anything you could have ever imagined and the parts of it supporting the lens are also made of titanium. This is something that used to be unimaginable with the wide angle fisheye lenses until our lens was released. Entaniya HAL lens makes it possible to take VR photos with unbelievable stability.
Technical data
Product Name: HAL 250 4.3Focal Length: 4.3mmField of View: H:250° / V:180° (Super35mm)Lens Construction: 18 Elements in 12 Groups / 4 Extra-low dispersion lensesF Number: F4 - F2.8 / F5.6 / F8 (Interchangeable parts)Image Size: 180° = φ13.1mm / 250° = φ17mmMount Types: Sony E / Canon EFParts contained: Tripod mount ring / ND filters (0.6/1.2) one each / Apertre Rings(F4/F5.6/F8)Manufactured: Made in Japan(except:caps)Weight: 1.6kg 〜 1.8kg (without caps)
In the box
Front Group Element Fisheye HAL 250 Rear Group Kit 4.3Sony E / Canon EF Adapter
Entaniya Sony E-Mount Adapter for Fisheye HAL250 4.3mm
SKU: MB-M1-E2
Entaniya Sony E-Mount Adapter designed for Hal 250 Fisheye HAL 4.3mm. Entaniya Mount Adapter made by SUS304 is for holding lens. It could be compared to an engine cylinder. If you hold it, you will be surprised about how light it is for sure.
719,00 €*
Brutto: 855,61 €
Zahlen Sie mit:
Wir versenden mit:
Schneller Versand
Persönliche Beratung und Showroom vor Ort
Bequemer Kauf auf Rechnung
Hotline 0211 930 730-33
Funktionale Cookies sind für die Funktionalität des Webshops unbedingt erforderlich. Diese Cookies ordnen Ihrem Browser eine eindeutige zufällige ID zu damit Ihr ungehindertes Einkaufserlebnis über mehrere Seitenaufrufe hinweg gewährleistet werden kann.
Amazon Pay
CSRF-Token:
Das CSRF-Token Cookie trägt zu Ihrer Sicherheit bei. Es verstärkt die Absicherung bei Formularen gegen unerwünschte Hackangriffe.
PayPal-Zahlungen
CAPTCHA-Integration
Zeitzone:
Das Cookie wird verwendet um dem System die aktuelle Zeitzone des Benutzers zur Verfügung zu stellen.
Herkunftsinformationen:
Das Cookie speichert die Herkunftsseite und die zuerst besuchte Seite des Benutzers für eine weitere Verwendung.
Session:
Das Session Cookie speichert Ihre Einkaufsdaten über mehrere Seitenaufrufe hinweg und ist somit unerlässlich für Ihr persönliches Einkaufserlebnis.
Cookie Einstellungen:
Das Cookie wird verwendet um die Cookie Einstellungen des Seitenbenutzers über mehrere Browsersitzungen zu speichern.
Amazon Pay:
Das Cookie wird für Zahlungsabwicklungen über Amazon eingesetzt.
Aktivierte Cookies:
Speichert welche Cookies bereits vom Benutzer zum ersten Mal akzeptiert wurden.
Cache Behandlung:
Das Cookie wird eingesetzt um den Cache für unterschiedliche Szenarien und Seitenbenutzer zu differenzieren.
Sendinblue:
Sendinblue tracker
Service Cookies werden genutzt um dem Nutzer zusätzliche Angebote (z.B. Live Chats) auf der Webseite zur Verfügung zu stellen. Informationen, die über diese Service Cookies gewonnen werden, können möglicherweise auch zur Seitenanalyse weiterverarbeitet werden.
Doofinder:
Das Cookie wird verwendet um Benutzerinteraktionen mit der Seitensuche zu verfolgen. Die Daten können für Optimierungen der Suchfunktion genutzt werden.
YouTube-Video
YouTube-Video
YouTube-Video
Merkzettel
Local Storage:
Speichert einen Zeitstempel um Elemente auf Wunsch für eine gewisse Zeit ausblenden zu können.
Tracking Cookies helfen dem Shopbetreiber Informationen über das Verhalten von Nutzern auf ihrer Webseite zu sammeln und auszuwerten.
Google Analytics:
Google Analytics wird zur der Datenverkehranalyse der Webseite eingesetzt. Dabei können Statistiken über Webseitenaktivitäten erstellt und ausgelesen werden.
Google Analytics:
Cookie von Google für Website-Analysen. Erzeugt statistische Daten darüber, wie der Besucher die Website nutzt.
Marketing-Cookies werden von Drittanbietern oder Verlegern verwendet, um personalisierte Werbung anzuzeigen. Sie tun dies, indem sie die Besucher auf den Webseiten verfolgen.
Google Ads:
Dieses Cookie wird gesetzt, wenn ein User über einen Klick auf eine Google Werbeanzeige auf die Website gelangt. Es enthält Informationen darüber, welche Werbeanzeige geklickt wurde, sodass erzielte Erfolge wie z.B. Bestellungen oder Kontaktanfragen der Anzeige zugewiesen werden können.
Google Ads:
Werbung Targeting
Google AdSense:
Das Cookie wird von Google AdSense für Förderung der Werbungseffizienz auf der Webseite verwendet.
Bing Ads:
Das Bing Ads Tracking Cookie wird verwendet um Informationen über die Aktivität von Besuchern auf der Website zu erstellen und für Werbeanzeigen zu nutzen.
Für Statistiken und Shop-Performance-Metriken genutzte Cookies.
Google Tag Manager:
Cookie von Google zur Steuerung der erweiterten Script- und Ereignisbehandlung.
Wir respektieren Ihre Privatsphäre
Diese Website verwendet Cookies, um Ihnen die bestmögliche Funktionalität bieten zu können... Mehr Informationen.