RigWheels CLM-100 Camera Ladder Mount
PLN 3,147.26*
net: PLN 2,558.75
Camera Ladder Mount:
100mm Ball Head Adapter
RigWheels Camera Ladder Mount
We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder.
The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed.
2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others.
Flat Mounting Plates Only
Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter
Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter
Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter
Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.
Variants from PLN 1,477.85*
RigWheels CLM-75 Camera Ladder Mount
PLN 3,010.43*
net: PLN 2,447.50
Camera Ladder Mount:
75mm Ball Head Adapter
RigWheels Camera Ladder Mount
We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder.
The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed.
2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others.
Flat Mounting Plates Only
Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter
Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter
Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter
Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.
Variants from PLN 1,477.85*
RigWheels CLM-F Camera Ladder Mount
PLN 1,477.85*
net: PLN 1,201.50
Camera Ladder Mount:
no Head Adapter
RigWheels Camera Ladder Mount
We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder.
The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed.
2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others.
Flat Mounting Plates Only
Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter
Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter
Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter
Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.
RigWheels CLM-M Camera Ladder Mount
PLN 3,010.43*
net: PLN 2,447.50
Camera Ladder Mount:
Mitchell Head Adapter
RigWheels Camera Ladder Mount
We’ve all seen the typical setup, an old hi-hat with the wooden base attached to a ladder with spring-clamps or C-clamps. Here is a much more solid, clean and professional way to accomplish the task of getting a video camera up onto of a ladder.
The 75mm, 100mm and Mitchell options come with two sets of stand-offs to accommodate different types of ladders. As you can see in the photo, both sets of stand-offs are needed to get above the top of the ladder so the camera movement would not be obstructed.
2 sets of connecting bolts are included with all options as the steps on some ladders are larger than others.
Flat Mounting Plates Only
Two RigPlates with the connecting hardware. This would usually be used for still photography or locked off shots using a head that can attach via a 3/8″ bolt. 75mm Ball Head Adapter
Camera Ladder Mount for 75mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.100mm Ball Head Adapter
Camera Ladder Mount for 100mm Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.Mitchell Head Adapter
Camera Ladder Mount for Mitchell Tripod head. included 2 sets of stand-offs for raising the adapter 3 or 6″ above the plates.
Variants from PLN 1,477.85*
RigWheels Cloud Mount DSLR
PLN 5,473.50*
net: PLN 4,450.00
RigWheels Cloud Mount DSLR
SKU: CM-DS
The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on RigMount XL mounting platform, the RigWheels Cloud Mount DSLR adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the RigWheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position.
Cloud Mount DSLR - In the box
2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)8 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 1″ – Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key
RigWheels Cloud Mount PRO
PLN 11,494.35*
net: PLN 9,345.00
RigWheels Cloud Mount PRO
SKU: CM-P
The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount PRO adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position.
In the box
2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup8 x C-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x Sidecar Tray
RigWheels Cloud Mount SideCar
PLN 7,389.23*
net: PLN 6,007.50
RigWheels Cloud Mount SideCar
SKU: CM-SC
The RigWheels Cloud Mount SideCar is the upgraded assortment of parts for out Sidecar/Hostess Tray configuration. This includes all of the parts for the standard (hood/roof/trunk) configuration plus the additional components necessary for the sidecar / hostess tray / underslung configurations. In the box
3 x RigPlate6 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 2″ Thumb Knob4 x 5/16″ x 1″ Thumb Knob2 x 5/16″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup2 x 5/16″ bolt – 7/8″ Long1 x 3/16″ Hex Key1 x 5/32″ Hex Key2 x 5/16″ x 3/4″ Thumb Knob4x 5/16″ Female Thumb Knob
RigWheels Cloud Mount SideCar with Case
PLN 9,852.30*
net: PLN 8,010.00
RigWheels Cloud Mount SideCar with Case
SKU: CM-SC-C
The RigWheels Cloud Mount SideCar is the upgraded assortment of parts for out Sidecar/Hostess Tray configuration. This includes all of the parts for the standard (hood/roof/trunk) configuration plus the additional components necessary for the sidecar / hostess tray / underslung configurations. In the box
3 x RigPlate6 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 2″ Thumb Knob4 x 5/16″ x 1″ Thumb Knob2 x 5/16″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup2 x 5/16″ bolt – 7/8″ Long1 x 3/16″ Hex Key1 x 5/32″ Hex Key2 x 5/16″ x 3/4″ Thumb Knob4 x 5/16″ Female Thumb Knob1 x Cloud Mount Travel Case
RigWheels Cloud Mount Slingshot 10 Vibration Isolator
PLN 4,105.13*
net: PLN 3,337.50
RigWheels Slingshot 10
SKU: SS-10
The Cloud Mount Slingshot builds on the incredible versatility of the Cloud Mount system by adding a configuration tailored for underslinging your camera/gimbal combination. The new elastic suspension components provide excellent vibration isolation performance for more demanding applications while maintaining the simplicity and practicality that RigWheels in known for.
Just like the standard Cloud Mount configurations, the Rigwheels Slingshot is fully adjustable and scaleable for use with a small gimbal and camera all the way up to full cinema packages using a monster like the Movi XL. Simply change the length/diameter of the cables and/or elastic tubing to tailor the mount to the size of your camera setup and the terrain you’ll be operating on. Tubing and cables are both available in 3 different diameters.
The elastic tubing is fastened to the system using our stainless steel tube connectors. These come with a variety of threading options so they can be placed in many different positions around our mounting plate as well as used with other rigging accessories. The standard positions for the tube mounts are where the Cloud Mount cables clamps are attached to the plate via 1/4-20″ screws.
APPROXIMATE PAYLOAD: 0,00 - 4,54 KG
RigWheels Cloud Mount Slingshot 20 Vibration Isolator
PLN 5,199.83*
net: PLN 4,227.50
RigWheels Slingshot 20
SKU: SS-20
The RigWheels Slingshot produces great results but the speed and ease of use of the standard Cloud Mount is essential to have in your arsenal. In many locations you are not able to mount a system which hangs to the outside footprint of your vehicle. The hood/roof/trunk placements of the Cloud Mount are ideal for these scenarios. Like all RigWheels systems the components of the Cloud Mount and Slingshot can be used in many other ways further increasing their net value. When you’re not using the system as a vibration isolator you can use the components as hard mounts etc… If you really want to be efficient with the gear you travel with RigWheels in an excellent choice. In one small case you can carry components to configure our RailDolly, Cloud Mount, Slingshot, RigMount X, RigMount XL, RigSkate and more.
APPROXIMATE PAYLOAD: 0,00 - 9,07 KG
RigWheels Cloud Mount Standard
PLN 6,568.20*
net: PLN 5,340.00
RigWheels Cloud Mount Standard
SKU: CM-FSThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.
Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.
This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position.
In the box
2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key
RigWheels Cloud Mount Standard + CASE
PLN 8,757.60*
net: PLN 7,120.00
RigWheels Cloud Mount Standard + CASE
SKU: CM-ST-CThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position.
In the box
2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x HARD CASE
RigWheels Cloud Mount Vibration Isolation Unit
PLN 2,736.75*
net: PLN 2,225.00
RigWheels Vibration Isolation Unit
SKU: CM-VI
The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.
In the box
2 x RigPlate8 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)
RigWheels Kraken Camera Car Mount KCMB
PLN 5,473.50*
net: PLN 4,450.00
Kraken Camera Car Mount:
Base
RigWheels Kraken Camera Car Mount
The Kraken Camera Car Mount sets a new standard in car rigging by combining mounting and positioning into one device. The innovative hinge design along with the ability to use standard tripod heads makes solid mounting intuitive and easy.Often for vehicle rigging, you pull parts from lots of different areas of your kit to have everything necessary. With the complete rental version of the Kraken Mount, you have camera suction mounteverything needed to securely mount any camera to a vehicle. This is a huge time saver when prepping for a shoot and a practical solution for rental houses / equipment rooms. Rigging 3 camera angles for a scene? Grab 3 Kraken mounts: done! Suction, positioning, stabilization, and safety all in one grab-and-go Pelican case.If you’re familiar with RigWheels, you know that we create new ways of doing things and original products (no knock-offs). This new system is the most complete, practical, common-sense solution you will find for an easily transportable car mounting system. Add up all the individual components and it’s also a great value.
HighlightsInnovative Hinge design for easy setupAudible low-suction alarm on the 10″ primary suction cupUses standard tripod heads for positioning (75mm bowl included, 100mm, Mitchell and flat available)Included 75mm half-ball mount to directly mount your cameraCapacity up to 175lbCustom Pelican 16103″ and 6″ stand-offs to raise your camera4 points of stabilization (with the full kit)9.5″ and 18″ stabilization rods (5/8″ diameter) that connect via 3/8″ threadsStandard size grip-heads for ease of useIncluded safety/tethering componentsLow-mode configuration for hood-mountingShort tripod-head tie-down knobExtention plateNo tools requiredCore components made in the USA
Kraken Base Unit1 x 10″ Vacuum Suction Cup with Low Suction Alarm4 x 3.25” Stand-Offs1 x RigPlate1 x RigPlate Pro2 x RigPlate Hinge1 x 75mm BowlConnecting HardwareKraken Complete Rental Kit
Kraken Base75mm Bowl75mm BallAdditional Extension Plate3.25″ Stand-Offs/Baby-Pins (12 pieces)6″ Stand-Offs (4 pieces)9.5″ Stabilization Rods (8 pieces)19″ Stabilisation Rods (8 pieces)C-Cup 4.5” Suction Cups (4 pieces)Grip-Heads (8 pieces)Strap & Safety KitJam StrapsCustom Pelican 1610 with wheel
RigWheels Kraken Camera Car Mount KCMC
PLN 15,873.15*
net: PLN 12,905.00
Kraken Camera Car Mount:
Complete Rental Kit
RigWheels Kraken Camera Car Mount
The Kraken Camera Car Mount sets a new standard in car rigging by combining mounting and positioning into one device. The innovative hinge design along with the ability to use standard tripod heads makes solid mounting intuitive and easy.Often for vehicle rigging, you pull parts from lots of different areas of your kit to have everything necessary. With the complete rental version of the Kraken Mount, you have camera suction mounteverything needed to securely mount any camera to a vehicle. This is a huge time saver when prepping for a shoot and a practical solution for rental houses / equipment rooms. Rigging 3 camera angles for a scene? Grab 3 Kraken mounts: done! Suction, positioning, stabilization, and safety all in one grab-and-go Pelican case.If you’re familiar with RigWheels, you know that we create new ways of doing things and original products (no knock-offs). This new system is the most complete, practical, common-sense solution you will find for an easily transportable car mounting system. Add up all the individual components and it’s also a great value.
HighlightsInnovative Hinge design for easy setupAudible low-suction alarm on the 10″ primary suction cupUses standard tripod heads for positioning (75mm bowl included, 100mm, Mitchell and flat available)Included 75mm half-ball mount to directly mount your cameraCapacity up to 175lbCustom Pelican 16103″ and 6″ stand-offs to raise your camera4 points of stabilization (with the full kit)9.5″ and 18″ stabilization rods (5/8″ diameter) that connect via 3/8″ threadsStandard size grip-heads for ease of useIncluded safety/tethering componentsLow-mode configuration for hood-mountingShort tripod-head tie-down knobExtention plateNo tools requiredCore components made in the USA
Kraken Base Unit1 x 10″ Vacuum Suction Cup with Low Suction Alarm4 x 3.25” Stand-Offs1 x RigPlate1 x RigPlate Pro2 x RigPlate Hinge1 x 75mm BowlConnecting HardwareKraken Complete Rental Kit
Kraken Base75mm Bowl75mm BallAdditional Extension Plate3.25″ Stand-Offs/Baby-Pins (12 pieces)6″ Stand-Offs (4 pieces)9.5″ Stabilization Rods (8 pieces)19″ Stabilisation Rods (8 pieces)C-Cup 4.5” Suction Cups (4 pieces)Grip-Heads (8 pieces)Strap & Safety KitJam StrapsCustom Pelican 1610 with wheel
Variants from PLN 5,473.50*
RigWheels MAG-Tight Camera Windshield Mount
PLN 1,505.21*
net: PLN 1,223.75
RigWheels MAG-Tight
The MAG-Tight Camera Windshield Mount is the most practical way you’ll find to mount a DSLR sized camera or other production devices, like transmitters, monitors and antennas, to a vehicle. With the growing popularity of shooting content inside of cars and the unmistakable front-on two-shot that you see everywhere, The Righweels MAG-Tight windshield mount provides an ideal solution by overcoming many challenges that typically arise when using traditional suction or hard-mounting techniques.
IT’S FAST!
There couldn’t be anything faster then snapping a couple magnets snapping together. Speed is critical for todays production environments and when you have fast tools you can get more content for your clients.
IT’S RELIABLE.
Forget about pumping your vacuum suction cups! This product was developed for a project where the cameras would be living in vehicles for up to a week at a time. If you’ve worked with suction mounts you know that they will loose power over time and more than that, it’s a thought that sits in your head the entire time you’re using suction which distracts you from the real work at hand. With our rubber coated magnets your camera will stay attached all day, all month, all year. This product is designed for HDSLR with compact glass or smaller (it can work for larger but that is at your discretion).
IT’S SOLID
With suction you’re using a material that is inherently flexible (rubber) to try to achieve a solid shot. This can introduce a lot of flex and vibrations. The MAG-Tight windshield mount essentially provide you with hard mounting points which yield much better results.
IT’S SMALL
One of the challenges with traditional rigging is the space necessary. In the interior space of a vehicle you need every millimeter you can get to tuck the cameras into the windshield deep enough to 1) stay out of the frame of other cameras 2) get as far away from the driver/passenger as possible to minimize distortion. The RigMount magnets are about 1/4″ thick and enable tricky placements quickly and easily.
IT’S VERSATILE
Like all RigWheels products, you can use these components individually for other purposes like mounting cameras and accessories to the exterior body panels of vehicles, railings, vending machines…. There are a lot of metal surfaces in the world!
Rigwheels Mag-Tight Curve Magnetic Window/Windshield Mount
PLN 1,505.21*
net: PLN 1,223.75
Rigwheels Mag-Tight CurveSKU: MTCK
The award winning Mag-Tight windshield mount has been an exceptional solution for quickly and easily mounting cameras and other accessories inside vehicles. RigWheels always strives to create new ways of doing things and ORIGINAL products. This March is the 10 year anniversary of RigWheels first product release (the original RigWheel or now, Microwheels) and we’re happy to announce another first of it’s kind product and improvement to the Mag-Tight concept, the Mag-Tight Curve. The standard Mag-Tight kit has proven it’s utility over the past few years in productions all around the world and on many of your favorite automotive themed shows however, one consideration when using the setup was the inability to use windshield wipers or the need to place the system on a portion of windshield where the wipers would not pass over. The new Mag-Tight Curve solves this problem with it’s domed surface which allow the wipers to pass over.
Mag-Tight Curve kit includes2 x RigMount 100 Curve magnets2 x standard RigMount 100 magnets1 x mini grip-head with hot-shoe adapter for the top side of the camera1 x friction arm for the bottom side of the camera
RigWheels PT-Zero Vibration Isolator Hanging
PLN 3,831.45*
net: PLN 3,115.00
RigWheels PT-Zero Vibration Isolator Hanging
SKU: PT-Z-H
The PT-Zero greatly improves on the performance of our original PTZ isolators by adding new isolation / damping components which provide 3X more isolation.
The PT-Zero uses more than 30 new isolation components to deliver amazing resultsMore options tailored for PTZ cameras to get your camera in the ideal spotPre-assembled components make installation and optimization more intuitive for users and systems integratorsThe optimal weight range of 8-12 lb is easy to achieve with additional weights available for smaller camerasPrecision machined parts made in the USA provide unmatched build quality for PTZ camera installation
The PT-Zero Hanging configuration is the option that provides the best possible isolation for your PTZ Camera. The isolator is configured for a target weight range of 8-12 pounds. Lighter cameras can be used but for best performance, our weights should be added to fall into the target weight range. The isolator ships assembled and other accessories like the wall mounting bracket can be added based on you’re installation requirements.
RigWheels PT-Zero Vibration Isolator Upright
PLN 3,284.10*
net: PLN 2,670.00
RigWheels PT-Zero Upright
The PT-Zero looks similar to the previous PTZ isolators however, there is a lot more isolation happening. We’ve added more than 30 new isolation components which dramatically increases the degree of isolation possible. We’ve also added more mounting and positioning options.
We’ve made it much more easy to install the PT-Zero than the previous isolators. The PT-Zero uses a target weight range of 3,62-5,44 kg. Certainly, there are lots of quality PTZ cameras that are lighter than this so we have created weights that can be added to get to the target weight. The RigWheels PT-Zero isolator sections ship fully or partially assembled (depending on the option selected) and the other wall brackets and mounting accessories can be added on easily.
In some scenarios, it’s necessary or convenient to place the PTZ camera on top of a surface or stand. With the newly added isolation components, we now also get exceptional results with the “camera-on-top” position and can offer this configuration for more installation options.
RigWheels RigMount Sport Windshield Mounting Set
PLN 492.62*
net: PLN 400.50
RigWheels RigMount Sport Windshield Mounting Set
The RigWheels RigMount Sport Windshield Mounting Pair is the magnetic pair for using Righweels RigMount sport on windshields and other thin surfaces where the two magnets can be sandwiched together to create the hold. In the box:
1 x RigWheels RMH1 RigMount Sport mit Ball Head1 x RigWheels RigMount Magnetic Mount Short RMS1
RigWheels RigMount X4
PLN 1,231.54*
net: PLN 1,001.25
RigWheels RigMount X4
Available variants
RigMount X4 (4 magnets with up to 200 lbs / 90.72 kg of holding strength)RigMount X6 (6 magnets with up to 300 lbs / 136.08 kg of holding strength)RigMount X8 (8 magnets with up to 400 lbs / 181.44 kg of holding strength)RigMount magnetic camera mounts are a new approach to portable camera support for both photo and video cameras. With industrial grade high-power rare-earth magnets these magnetic camera mounts will amaze you with their strength when affixed to a steel surface. With the ability to magnet mount the possibilities are endless for placing your camera in the perfect position to get the perfect shot. The ease and quickness of the RigMount X will make this magnetic camera mount configuration your ‘go to’ tool for fast and easy camera placement.The great thing about mounting a camera with a RigMount magnetic camera mount is that once it is safely attached to a steel surface, it will never loose it’s holding power. This gives you peace of mind and better results as well. Many other mounting devices can sag or detach. When you mount your camera with a RigMount you can be confident that your frame will stay exactly where you want it. If shooting in extremely hot or cold weather RigMounts are perfect as they are not affected by temperature unlike suction cups.Suction mounts are prone to vibration because of the rubber components. Because this magnet camera mount uses less rubber material than suction mounts your shots will be more stable with less vibration. The rubber coating on RigMount magnetic mounts is just enough to protect the surface you are mounting to from being scratched while not depleting the strength of the magnet.Righweels RigMount X4 comes with 4 individual RigMount magnet mounts which attach to the RigPlate. You can also use the parts separately for mounting point-and-shoot and action cameras like the GoPro.RigMount X4 includes
1 x RigPlate4 x RigMount Magnetic Mount – Long1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer
RigWheels RigMount X6 Magnetic Camera Mount
PLN 1,505.21*
net: PLN 1,223.75
RigWheels RigMount X6
RigMount magnetic camera mounts are a new approach to portable camera support for both photo and video cameras. With industrial grade high-power rare-earth magnets these magnetic camera mounts will amaze you with their strength when affixed to a steel surface. With the ability to magnet mount the possibilities are endless for placing your camera in the perfect position to get the perfect shot. The ease and quickness of the RigMount X will make this magnetic camera mount configuration your ‘go to’ tool for fast and easy camera placement.The great thing about mounting a camera with a RigMount magnetic camera mount is that once it is safely attached to a steel surface, it will never loose it’s holding power. This gives you peace of mind and better results as well. Many other mounting devices can sag or detach. When you mount your camera with a RigWheels RigMount you can be confident that your frame will stay exactly where you want it. If shooting in extremely hot or cold weather RigMounts are perfect as they are not affected by temperature unlike suction cups.Suction mounts are prone to vibration because of the rubber components. Because this magnet camera mount uses less rubber material than suction mounts your shots will be more stable with less vibration. The rubber coating on RigMount magnetic mounts is just enough to protect the surface you are mounting to from being scratched while not depleting the strength of the magnet.RigMount X6 comes with 6 individual RigWheels RigMount magnet mounts which attach to the RigPlate. You can also use the parts separately for mounting point-and-shoot and action cameras like the GoPro.
In the box
1 x RigPlate6 x RigMount Magnetic Mount Long1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer
Available variantsRigMount X4 (4 magnets with up to 90.72 kg of holding strength)RigMount X6 (6 magnets with up to 136.08 kg of holding strength)RigMount X8 (8 magnets with up to 181.44 kg of holding strength)
RigWheels RigMount X8
PLN 1,778.89*
net: PLN 1,446.25
RigWheels RigMount X8
RigMount magnetic camera mounts are a new approach to portable camera support for both photo and video cameras. With industrial grade high-power rare-earth magnets these magnetic camera mounts will amaze you with their strength when affixed to a steel surface. With the ability to magnet mount the possibilities are endless for placing your camera in the perfect position to get the perfect shot. The ease and quickness of the RigMount X will make this magnetic camera mount configuration your ‘go to’ tool for fast and easy camera placement.The great thing about mounting a camera with a RigMount magnetic camera mount is that once it is safely attached to a steel surface, it will never loose it’s holding power. This gives you peace of mind and better results as well. Many other mounting devices can sag or detach. When you mount your camera with aRigWheels RigMount you can be confident that your frame will stay exactly where you want it. If shooting in extremely hot or cold weather RigMounts are perfect as they are not affected by temperature unlike suction cupsSuction mounts are prone to vibration because of the rubber components. Because this magnet camera mount uses less rubber material than suction mounts your shots will be more stable with less vibration. The rubber coating on RigMount magnetic mounts is just enough to protect the surface you are mounting to from being scratched while not depleting the strength of the magnet.RigMount X8 comes with 8 individual RigWheels RigMount magnet mounts which attach to the RigPlate. You can also use the parts separately for mounting point-and-shoot and action cameras like the GoPro.
In the box
1 x RigPlate2 x RigAxle4 x 5/16″ bolt – 2″ Long8 x 5/16″ Washer8 x RigMount Magnetic Mount – Long1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer
Available variantsRigMount X4 (4 magnets with up to 200 lbs / 90.72 kg of holding strength)RigMount X6 (6 magnets with up to 300 lbs / 136.08 kg of holding strength)RigMount X8 (8 magnets with up to 400 lbs / 181.44 kg of holding strength)
RigWheels RigMount XL Sidecar Hostess Tray
PLN 5,473.50*
net: PLN 4,450.00
RigWheels RigMount XL Sidecar Hostess Tray
SKU: RMXL-SC
The Sidecar / Hostess Tray configuration is one of our favorites to get some great classic angles. Because the sides of vehicles generally have a lot of curves and contours A-Cup suction cups are recommended for this setup because they can conform the the curves. When possible magnets are preferred because of the more solid connection.
Sidecar/Hostess Tray includes
2 x RigPlate6 x RigAxle8 x A-Cup – Suction Cup4 x 3 Prong Knob – 5/16-18 x 1″1 x 5/16″ bolt – 2″ Long1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer4 x Wing Nut – 5/16″6 x 5/16″ Washer2 x 5/16″ bolt – 7/8″ Long