Chrosziel 2nd Handwheel for Studio Rig Product code: 201-02 2nd Handwheel for Studio Rig incl. Scale

Chrosziel 206-05S-12 Article No 206-05S-12 DV StudioRig with gear drive, follow focus with drive gear 206-12 mod. 0.8, scale (205-02), for one-side-operation. For lens diameters up to 110 mm.

Chrosziel DV StudioRig Photo Follow Focus Article No 206-05SP Chrosziel DV StudioRig Photo, follow focus with reverse gear for photo lenses (mod. 0.8), incl. handwheel, scale (205-02), for one-side-operation. For use up to lens Ø of 97 mm.

Chrosziel DV StudioRig plus Follow Focus Article No 206-60S Chrosziel DV StudioRig plus, follow focus with non-slip padded hand wheel, VariLockwith 2 adjustable hard stops, free wheel, scale (205-02), for one-side operation. Extended range for lens diameter up to 130 mm (measured with gear drive 206-12, not included)

Chrosziel Flexi Gear Ring Ø 60-120mm Product code: 206-30 FlexiGearRing MK II, Gear ring flexible adjustable between Ø 60-120 mm, mod 0.8 rotation angle approx. 310°. For still photo and video lenses without gear ring.

Chrosziel Flexi Gear Ring Ø 60-120mm 4 pcs. Product code: 206-30X4 Set with 4 pcs. FlexiGearRing MK II, Gear ring flexible adjustable between Ø 60-120 mm, mod 0.8 rotation angle approx. 310°. For still photo and video lenses without gear ring.

Chrosziel Flexible Shaft FF Product code: 201-31 Chrosziel Flexible Shaft for Studio Rig, length 330mm

Chrosziel Focus Drive mod 0.8 - Ø 25,6mm Product code: 201-12 Focus Drive for Video prime lenses and Cine Style, for Studio Rig, mod 0.8 - Ø 25,6 mm, B 8mm (teeth 30) Studio Rig Follow Focus, versions for video and film lenses. For smooth and precise focus moves due to our fluid damping module and gear units and bearings with the lowest tolerances: It allows play and jerk-free focus moves even for permanent direction changes. We abstain from using switchable gear boxes for the sake of play-free preciseness. Instead, Chrosziel uses two gear boxes for the different focus markings of film and video lenses. Film lenses, prime lens and “Cine style” video lenses typically display an adjustable range of 200º from close-up to infinity. The Studio Rig Cine translates the rotation on the hand wheel in a way to lens focus ring that approx. one turn covers the range. The focus of the video lenses rotate only approx. 100º to 145º between close-up and infinity. For similar operation and preciseness, the Studio Rig Video’s gear unit extends the resulting angle of rotation of the video lenses. Further adjustments are made by the use different gear diameters. All gear drives can be easily mounted without tools. The three modules of the lens manufacturers are available. The Studio Rig basic unit comes with hand wheel 1 with fluid damper, scale ring and focus lever and clamping unit for the 15 mm video standard (see p. 26, with adaptor for 19mm rods). Please select the gear drive according to your lens. The QuickFit Versions. They slip onto the rods from below – no need to dismantle other accessories. Fixed by the turn of an excenter, the focus gear swings onto the lens – ready! They come with an intermediate for the 19mm rod adaptor. The hand wheel with VariLock 2 Module, allows easy setting of two mechanical stops and free wheel. The VariLock 2 wheel can be attached instead of first or the second hand wheel.

Chrosziel Focus Lever for Studio Rig Product code: 201-18 Chrosziel Focus Lever for Studio Rig, length 10 cm

Chrosziel MB450R2 + FF DSLR 2 SKU: 450R2-DSLR2KIT Kit DSLR 2 MB450R2 and Follow Focus for Canon EOS 5DNikon D800Nikon D90Panasonic DMC-GH3Blackmagic Pocket Camera incl. 450-R2 MatteBox with french flag (450-11)pivot-mech. for optional sidewingsbracket for Ø15mm rodsend plate w. thread Ø114/110mm (450-20)Flexi-Insertring 110:75/98mm (450-22)Flexi-Insertring 110:50/85mm (401-453)LWS 15 HD DSLR (206-60S)DV StudioRig plus (206-12)Focus Drive mod 0.8, Ø 36,8mm (206-30)3 x FlexiGearRing Ø 60-120mm2 rotat. filterholders4x4 (402-12)+ multi4x4/4x5.650 (410-04)

Chrosziel Reverse gear for STUDIO Rig Product code 201-40 Reverse gear for Studio Rig (Video 203-01/S or Film 204-01S), with turnaround gear and fittings. Please combine additionally with gear drive 201-12 (mod. 0.8, Ø25,6mm) Studio Rig Follow Focus, versions for video and film lenses. For smooth and precise focus moves due to our fluid damping module and gear units and bearings with the lowest tolerances: It allows play and jerk-free focus moves even for permanent direction changes. We abstain from using switchable gear boxes for the sake of play-free preciseness. Instead, Chrosziel uses two gear boxes for the different focus markings of film and video lenses. Film lenses, prime lens and “Cine style” video lenses typically display an adjustable range of 200º from close-up to infinity. The Studio Rig Cine translates the rotation on the hand wheel in a way to lens focus ring that approx. one turn covers the range. The focus of the video lenses rotate only approx. 100º to 145º between close-up and infinity. For similar operation and preciseness, the Studio Rig Video’s gear unit extends the resulting angle of rotation of the video lenses. Further adjustments are made by the use different gear diameters. All gear drives can be easily mounted without tools. The three modules of the lens manufacturers are available. The Studio Rig basic unit comes with hand wheel 1 with fluid damper, scale ring and focus lever and clamping unit for the 15 mm video standard (see p. 26, with adaptor for 19mm rods). Please select the gear drive according to your lens. The QuickFit Versions. They slip onto the rods from below – no need to dismantle other accessories. Fixed by the turn of an excenter, the focus gear swings onto the lens – ready! They come with an intermediate for the 19mm rod adaptor. The hand wheel with VariLock 2 Module, allows easy setting of two mechanical stops and free wheel. The VariLock 2 wheel can be attached instead of first or the second hand wheel.

Chrosziel Studio Rig Cine Single VariLock2 Article No 204-02S Studio Rig Cine VariLock 2 Single handwheel, Follow Focus with 2 variable angle stops and free wheel. 1 handwheel, incl. scale + focus lever Chrosziel Studio Rig Follow Focus, versions for video and film lenses. For smooth and precise focus moves due to our fluid damping module and gear units and bearings with the lowest tolerances: It allows play and jerk-free focus moves even for permanent direction changes. We abstain from using switchable gear boxes for the sake of play-free preciseness. Instead, Chrosziel uses two gear boxes for the different focus markings of film and video lenses. Film lenses, prime lens and “Cine style” video lenses typically display an adjustable range of 200º from close-up to infinity. The Studio Rig Cine translates the rotation on the hand wheel in a way to lens focus ring that approx. one turn covers the range. The focus of the video lenses rotate only approx. 100º to 145º between close-up and infinity. For similar operation and preciseness, the Studio Rig Video’s gear unit extends the resulting angle of rotation of the video lenses. Further adjustments are made by the use different gear diameters. All gear drives can be easily mounted without tools. The three modules of the lens manufacturers are available. The Studio Rig basic unit comes with hand wheel 1 with fluid damper, scale ring and focus lever and clamping unit for the 15 mm video standard (see p. 26, with adaptor for 19mm rods). Please select the gear drive according to your lens. The QuickFit Versions. They slip onto the rods from below – no need to dismantle other accessories. Fixed by the turn of an excenter, the focus gear swings onto the lens – ready! They come with an intermediate for the 19mm rod adaptor. The hand wheel with VariLock 2 Module, allows easy setting of two mechanical stops and free wheel. The VariLock 2 wheel can be attached instead of first or the second hand wheel.

Chrosziel StudioRig Cine complete Article No 204-01 StudioRig Cine - double-sided connection for handwheel, follow focus control incl. handwheel 201-03, scale 201-04 and focus lever 201-18. Optional 2nd handwheel (201-02) Chrosziel Studio Rig Follow Focus, versions for video and film lenses. For smooth and precise focus moves due to our fluid damping module and gear units and bearings with the lowest tolerances: It allows play and jerk-free focus moves even for permanent direction changes. We abstain from using switchable gear boxes for the sake of play-free preciseness. Instead, Chrosziel uses two gear boxes for the different focus markings of film and video lenses. Film lenses, prime lens and “Cine style” video lenses typically display an adjustable range of 200º from close-up to infinity. The Studio Rig Cine translates the rotation on the hand wheel in a way to lens focus ring that approx. one turn covers the range. The focus of the video lenses rotate only approx. 100º to 145º between close-up and infinity. For similar operation and preciseness, the Studio Rig Video’s gear unit extends the resulting angle of rotation of the video lenses. Further adjustments are made by the use different gear diameters. All gear drives can be easily mounted without tools. The three modules of the lens manufacturers are available. The Studio Rig basic unit comes with hand wheel 1 with fluid damper, scale ring and focus lever and clamping unit for the 15 mm video standard (see p. 26, with adaptor for 19mm rods). Please select the gear drive according to your lens. The QuickFit Versions. They slip onto the rods from below – no need to dismantle other accessories. Fixed by the turn of an excenter, the focus gear swings onto the lens – ready! They come with an intermediate for the 19mm rod adaptor. The hand wheel with VariLock 2 Module, allows easy setting of two mechanical stops and free wheel. The VariLock 2 wheel can be attached instead of first or the second hand wheel.

Chrosziel StudioRig Cine Kit SKU: 204-01KIT StudioRig Cine Kit for Ø15/19 mm rods, incl. 204-01 double-sided FollowFocus, incl. handwheel 201-03, scale 201-04, focus lever 201-18, 4 cine gear drives mod. 0.8 in different sizes: 201-12, 201-22, 201-05, 201-23 and 401-10 Adapter Ø15/19 mm rods, in Case Optional: 2nd handwheel (201-02).

Chrosziel StudioRig Cine VariLock 2 Article No 204-02 StudioRig Cine VariLock 2, double sided connection for handwheel, follow focus control with 2 variable angle stops and free wheel, incl. handwheel, scale and focus lever Chrosziel Studio Rig Follow Focus, versions for video and film lenses. For smooth and precise focus moves due to our fluid damping module and gear units and bearings with the lowest tolerances: It allows play and jerk-free focus moves even for permanent direction changes. We abstain from using switchable gear boxes for the sake of play-free preciseness. Instead, Chrosziel uses two gear boxes for the different focus markings of film and video lenses. Film lenses, prime lens and “Cine style” video lenses typically display an adjustable range of 200º from close-up to infinity. The Studio Rig Cine translates the rotation on the hand wheel in a way to lens focus ring that approx. one turn covers the range. The focus of the video lenses rotate only approx. 100º to 145º between close-up and infinity. For similar operation and preciseness, the Studio Rig Video’s gear unit extends the resulting angle of rotation of the video lenses. Further adjustments are made by the use different gear diameters. All gear drives can be easily mounted without tools. The three modules of the lens manufacturers are available. The Studio Rig basic unit comes with hand wheel 1 with fluid damper, scale ring and focus lever and clamping unit for the 15 mm video standard (see p. 26, with adaptor for 19mm rods). Please select the gear drive according to your lens. The QuickFit Versions. They slip onto the rods from below – no need to dismantle other accessories. Fixed by the turn of an excenter, the focus gear swings onto the lens – ready! They come with an intermediate for the 19mm rod adaptor. The hand wheel with VariLock 2 Module, allows easy setting of two mechanical stops and free wheel. The VariLock 2 wheel can be attached instead of first or the second hand wheel.

EdelKrone FocusONE v2SKU: EDYBXNew generation follow focus designed for camera operators instead of focus pullers. Unique marker disk faces the camera operator for quick & precise focus adjustments. FocusONE is the world's most precise follow focus, not because it has the best gearbox design, but because its gearbox design is unrelated to its precision. What does this mean exactly? Gearboxes on regular follow focuses are between the marker disc and the focus ring, resulting in a loss of precision because of gear play in the gearbox. FocusONE's innovative design allows the marker disc to be in direct contact with the focus ring. This unique approach makes edelrkone FocusONE the most precise follow focus you can find, even at its affordable price.Features Custom tension adjustmentControl wheel with flexible anglesPen-free focus markingWorks on either side of the cameraMattebox friendlyCompatible with All LensesAttaches on any rod

F&V Follow Focus Gear Cine Follow Focus Gear Cine 0.8 mod and 37 Teeth for the F&V Follow Focus BasicF&V Follow Focus Advance

SHAPE Follow Focus ProSKU: FFPRO The SHAPE Follow Focus Pro is an industry workhorse and has already proven itself on countless tough shoots all over the world, so you needn’t worry about it letting you down. SHAPE engineering is internationally renowned and there is one of the most robust motion picture accessories ever built. It mounts on 15 mm rods and features an adjustable arm which puts the gear at the optimal position for the lens, no matter what the diameter is. The unit snaps onto 15 mm rods, allowing for quick attachment, removal, and repositioning. Two 0.8 pitch gears come included and give you a choice of either 28 teeth or 43 teeth – depending on the throw distance of the lens. Additional features include two adjustable hard stops, removable marking disc, and an industry standard accessory port for using optional whips and cranks. While the Follow Focus Pro contains the essentials for pulling focus on any type of project production, the choice of either 15 mm rod adaptors means that you can SHAPE the system to meet your particular requirements. Snap-On 15 mm rods for quick attachment, removal, and repositioningReliable build quality with CNC Machined Aluminium PartsAdjustable gear arm which puts the gear at the optimal positionDesigned with standard accessory port for whips or cranks2 x 0.8 Pitch Gears: 28 & 43 teethtwo adjustable hard stopsRemovable Marking DiscKnob is not reversible

SHAPE single rod follow focus SKU: FA123 Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens.  At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminum 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it’s tightened by a locking lever. The clamp’s rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T. The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11″ whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel. At the center of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crank;All gears can be flipped to the front or back position which is helpful for compact lens configurations;Two rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera body;Swing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you’re ready;A compact design takes little space, so you can still attach a matte box to the front;Use the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place. In the box 1 x FOLLOW FOCUS5 x GEAR WHEEL (M 0.5/78T ; M 0.6/64T; M 0.8/38T; M 0.8/43T; M 0.8/78T)1 x SPEED CRANK1 x 11’’ WHIP4 x MARKING DISK WITH MAGNET1 x FRICTION RUBBER WHEEL 49MM

SHAPE Sony FX3/FX30 Kit Matte Box Follow FocusSKU: FX3KITSony FX3/FX30 Cage (FX3CAGE)CNC-milled aluminum cage specifically designed to protect and support the Sony FX3/FX30. Includes a cold shoe, ARRI rosette, seven 3/8-16 threaded mount points, and multiple 1/4-20 threaded mount points. The cage design allows access to all camera controls and side outputs, as well as memory cards, battery compartment, lens release, doors, locks, and hot shoe. In addition, A detachable lock protection system to secure and hold in place your 4K FULL HDMI cable is included with the cage. Also included is a top plate with a left-hand threaded ARRI hole patterns that fits on top of Sony’s factory handle. The cage can be fitted with a quick release tripod plate or DELTA adapter.SHAPE MATTE BOX SWING-AWAY (AKSWA)A silicone matte box mounted on a CNC aluminum main frame with an outer diameter of up to 124 mm. It provides a wide field of view for a variety of wide-angle lenses. Two 4x5.6 filter trays (one rotary) with easy access handles that allow one-handed filter changes. 4x4 filters can also be installed in the trays. The frame includes two stops at the bottom of the filter trays section to prevent the filters from falling through. The removable swing-away module makes lens changes a snap. A spring pin helps to lock the mechanism closed without manually setting the pin. 2 magnets hold it in place when closed. Removable height adjustable rod block with one tightening knob allows micro-adjustment of height, ensuring compatibility with a wide range of lenses. The rod block can be re-installed directly on the main frame for a straight configuration. The complete kit allows three different configurations, (swing-away, straight and clip-on). Removable light carbon fiber french flag can be attached to the top to prevent flares. A series of adapter rings are included in the kit: =Clamp-on adapter ring: 124-87 mm =Threaded aluminium adapter rings: 87-82 mm 87-77 mm 87-72 mm 87-67 mm = Fabric knicker: 124mmSHAPE kit focus single rod follow focus 15 mm LWs (FA123)Use the compact SHAPE Follow Focus Kit with Single 15 mm Rod Clamp with your camera setup to make focus pulling easy. The modular design allows you to add and remove any of the components without screws or tools, and its small profile allows the addition of a matte box or accessories around your lens. At the core of the kit is a rubber, anti-slip follow focus wheels attached to a single aluminum 15 mm rod clamp. The clamp rotates to adjust to most lens sizes, and it's tightened by a locking lever.The clamp's rotation also allows the focus wheel to easily swing out of the way when changing lenses. Five drive gears are included to fit a variety of lens sizes: 0.5 MOD/78T, 0.6 MOD/64T, 0.8 MOD/38T, 0.8 MOD/43T, and 0.8 MOD/78T.The gears can be flipped from front to back to facilitate different lens configurations. A 49 mm rubber friction wheel is also included for the 0.5 MOD/78T gear which is most commonly used with DSLR lenses. For alternate fine-focus configurations, use the included speed crank or 11" whip, both of which attach to the center point of the knob. Four magnetic marking disks are included to attach to the focus wheel.At the center of the knob, an ARRI-standard accessory port for attaching separately available accessories such as a whip or a speed crankAll gears can be flipped to the front or back position which is helpful for compact lens configurationsTwo rotation points (one on the rod and one on the body) allowing you to get the follow focus perfectly aligned vertically on the side of the camera bodySwing Arm Design allows you to simply pull the follow focus away from the lens for a quick lens change then you can push it back into place when you're readyA compact design takes little space, so you can still attach a matte box to the frontUse the swing arm to properly align the follow focus and then you can tighten the thumbscrew on the bottom to keep it in place.15 mm 10 in rods (15TUBE10)One pair of SHAPE 15-mm aluminum rods for your compatible camera rig. Mount any 15-mm compatible accessories and form the support structure of your rig.15-mm diameter10-in lengthHollow, non-threadedTapered ends for easy connection to a rod blockAluminium coated with a clear finish

Tilta Nucleus Nano II The Nano II allows users to wirelessly adjust camera settings via WiFi, Bluetooth, and the motor’s USB-C port for compatible camera systems such as Canon, Sony, Black Magic Design and more. Equipped with a high-performance motor, the TILTA NUCLEUS Nano II delivers five times the torque of its predecessor with convenient USB-C power input and output ports, perfect for chaining together multiple motors from a single power source. The TILTA Nano II is our most compatible system to date featuring compatibility with DJI RS2, RS3 Pro, DJI Focus Motors, Nucleus M and the previous generation of Nucleus Nano, ensuring a smooth workflow for users who already utilize previous iterations of the Nucleus Ecosystem. High Performance Motor 5 Times the torque of Nucleus N. Auto-adjustable torque design. High-efficiency cooling system. Three Main Displays Camera control, focus control, motor control, all in one. Touch Control Intuitive interaction at your finger tips. Improved Power Supply Upgraded USB-C port. Efficient power management. Multi-channel Communication Maximum 4-channel control. Create infinite possibilities Basic Kit1 x Nucleus Nano II Hand Wheel Controller（12009.00002.00.00）1 x Nucleus Nano II Motor（12009.00001.00.00）1 x USB-C Power Cable (30cm)（21114.00061.00.00）1 x 15mm Rod Holder to Dual 1/4″”-20 Adapter – Black（12013.00010.00.00）1 x Aluminum Rod 15*100mm – Black（R15-100-B）1 x Photographic Lens Follow Focus Gear Ring（FR-T03）1 x 3/16 Allen Key（32123.00037.00.00）1 x Instruction Manual 1 x Soft Carrying Case for Nucleus Nano II Power Handle Kit / K11 x Nucleus Nano II Hand Wheel Controller（12009.00002.00.00）1 x Nucleus Nano II Power Handle（12003.00008.00.00）2 x Nucleus Nano II Motor Kit（12009.00001.00.00）2 x Photographic Lens Follow Focus Gear Ring（FR-T03）2 x USB-C Power Cable (30cm)（21114.00061.00.00）1 x P-Tap to USB-C Power Cable (50cm)（TCB-PTAP-USBC-50）2 x Aluminum Rod 15*150mm – Black（R15-150-B）1 x 15mm Rod Holder to Dual 1/4″-20 Adapter – Black（12013.00010.00.00）1 x Allen Key（32123.00023.00.00）1 x Instruction Manual 1 x Advanced Soft Carrying Case for Nucleus Nano II1 x Tilta Rubber Rod Support（11013.00759.00 .00）1 x Tilta Accessory Mounting Bracket (1/4″-20 with Locating Pins) – Black（TA-AMB3-B）1 x Tilta F970 Battery Plate V2 – Black（TA-BTP2-F970-B）1 x Alley Key（32123.00071.00.00） Control Handle Kit / K21 x Nucleus Nano II Hand Wheel Controller （12009.00002.00.00）1 x Nucleus Nano II Control Handle（12009.00003.00.00）2 x Nucleus Nano II Motor Kit（12009.00001.00.00）2 x Photographic Lens Follow Focus Gear Ring（FR-T03）2 x USB-C Power Cable (30cm)（21114.00061.00.00）1 x P-Tap to USB-C Power Cable (50cm)（TCB-PTAP-USBC-50）2 x Aluminum Rod 15*150mm – Black（R15-150-B)1 x 15mm Rod Holder to Dual 1/4″”-20 Adapter – Black（12013.00010.00.00）1 x Tilta Accessory Mounting Bracket (1/4″”-20 with Locating Pins) – Black（TA-AMB3-B）1 x Tilta F970 Battery Plate V2 – Black（TA-BTP2-F970-B）1 x Allen Key（32123.00023.00.00）1 x Instruction Manual 1 x Advanced Soft Carrying Case for Nucleus Nano II1 x Tilta Rubber Rod Support (11013.00759.00 .00）1 x Alley Key（32123.00071.00.00）

Tilta Nucleus Nano II The Nano II allows users to wirelessly adjust camera settings via WiFi, Bluetooth, and the motor’s USB-C port for compatible camera systems such as Canon, Sony, Black Magic Design and more. Equipped with a high-performance motor, the TILTA NUCLEUS Nano II delivers five times the torque of its predecessor with convenient USB-C power input and output ports, perfect for chaining together multiple motors from a single power source. The TILTA Nano II is our most compatible system to date featuring compatibility with DJI RS2, RS3 Pro, DJI Focus Motors, Nucleus M and the previous generation of Nucleus Nano, ensuring a smooth workflow for users who already utilize previous iterations of the Nucleus Ecosystem. High Performance Motor 5 Times the torque of Nucleus N. Auto-adjustable torque design. High-efficiency cooling system. Three Main Displays Camera control, focus control, motor control, all in one. Touch Control Intuitive interaction at your finger tips. Improved Power Supply Upgraded USB-C port. Efficient power management. Multi-channel Communication Maximum 4-channel control. Create infinite possibilities Basic Kit1 x Nucleus Nano II Hand Wheel Controller（12009.00002.00.00）1 x Nucleus Nano II Motor（12009.00001.00.00）1 x USB-C Power Cable (30cm)（21114.00061.00.00）1 x 15mm Rod Holder to Dual 1/4″”-20 Adapter – Black（12013.00010.00.00）1 x Aluminum Rod 15*100mm – Black（R15-100-B）1 x Photographic Lens Follow Focus Gear Ring（FR-T03）1 x 3/16 Allen Key（32123.00037.00.00）1 x Instruction Manual 1 x Soft Carrying Case for Nucleus Nano II Power Handle Kit / K11 x Nucleus Nano II Hand Wheel Controller（12009.00002.00.00）1 x Nucleus Nano II Power Handle（12003.00008.00.00）2 x Nucleus Nano II Motor Kit（12009.00001.00.00）2 x Photographic Lens Follow Focus Gear Ring（FR-T03）2 x USB-C Power Cable (30cm)（21114.00061.00.00）1 x P-Tap to USB-C Power Cable (50cm)（TCB-PTAP-USBC-50）2 x Aluminum Rod 15*150mm – Black（R15-150-B）1 x 15mm Rod Holder to Dual 1/4″-20 Adapter – Black（12013.00010.00.00）1 x Allen Key（32123.00023.00.00）1 x Instruction Manual 1 x Advanced Soft Carrying Case for Nucleus Nano II1 x Tilta Rubber Rod Support（11013.00759.00 .00）1 x Tilta Accessory Mounting Bracket (1/4″-20 with Locating Pins) – Black（TA-AMB3-B）1 x Tilta F970 Battery Plate V2 – Black（TA-BTP2-F970-B）1 x Alley Key（32123.00071.00.00） Control Handle Kit / K21 x Nucleus Nano II Hand Wheel Controller （12009.00002.00.00）1 x Nucleus Nano II Control Handle（12009.00003.00.00）2 x Nucleus Nano II Motor Kit（12009.00001.00.00）2 x Photographic Lens Follow Focus Gear Ring（FR-T03）2 x USB-C Power Cable (30cm)（21114.00061.00.00）1 x P-Tap to USB-C Power Cable (50cm)（TCB-PTAP-USBC-50）2 x Aluminum Rod 15*150mm – Black（R15-150-B)1 x 15mm Rod Holder to Dual 1/4″”-20 Adapter – Black（12013.00010.00.00）1 x Tilta Accessory Mounting Bracket (1/4″”-20 with Locating Pins) – Black（TA-AMB3-B）1 x Tilta F970 Battery Plate V2 – Black（TA-BTP2-F970-B）1 x Allen Key（32123.00023.00.00）1 x Instruction Manual 1 x Advanced Soft Carrying Case for Nucleus Nano II1 x Tilta Rubber Rod Support (11013.00759.00 .00）1 x Alley Key（32123.00071.00.00）

Tilta Nucleus Nano II The Nano II allows users to wirelessly adjust camera settings via WiFi, Bluetooth, and the motor’s USB-C port for compatible camera systems such as Canon, Sony, Black Magic Design and more. Equipped with a high-performance motor, the TILTA NUCLEUS Nano II delivers five times the torque of its predecessor with convenient USB-C power input and output ports, perfect for chaining together multiple motors from a single power source. The TILTA Nano II is our most compatible system to date featuring compatibility with DJI RS2, RS3 Pro, DJI Focus Motors, Nucleus M and the previous generation of Nucleus Nano, ensuring a smooth workflow for users who already utilize previous iterations of the Nucleus Ecosystem. High Performance Motor 5 Times the torque of Nucleus N. Auto-adjustable torque design. High-efficiency cooling system. Three Main Displays Camera control, focus control, motor control, all in one. Touch Control Intuitive interaction at your finger tips. Improved Power Supply Upgraded USB-C port. Efficient power management. Multi-channel Communication Maximum 4-channel control. Create infinite possibilities Basic Kit1 x Nucleus Nano II Hand Wheel Controller（12009.00002.00.00）1 x Nucleus Nano II Motor（12009.00001.00.00）1 x USB-C Power Cable (30cm)（21114.00061.00.00）1 x 15mm Rod Holder to Dual 1/4″”-20 Adapter – Black（12013.00010.00.00）1 x Aluminum Rod 15*100mm – Black（R15-100-B）1 x Photographic Lens Follow Focus Gear Ring（FR-T03）1 x 3/16 Allen Key（32123.00037.00.00）1 x Instruction Manual 1 x Soft Carrying Case for Nucleus Nano II Power Handle Kit / K11 x Nucleus Nano II Hand Wheel Controller（12009.00002.00.00）1 x Nucleus Nano II Power Handle（12003.00008.00.00）2 x Nucleus Nano II Motor Kit（12009.00001.00.00）2 x Photographic Lens Follow Focus Gear Ring（FR-T03）2 x USB-C Power Cable (30cm)（21114.00061.00.00）1 x P-Tap to USB-C Power Cable (50cm)（TCB-PTAP-USBC-50）2 x Aluminum Rod 15*150mm – Black（R15-150-B）1 x 15mm Rod Holder to Dual 1/4″-20 Adapter – Black（12013.00010.00.00）1 x Allen Key（32123.00023.00.00）1 x Instruction Manual 1 x Advanced Soft Carrying Case for Nucleus Nano II1 x Tilta Rubber Rod Support（11013.00759.00 .00）1 x Tilta Accessory Mounting Bracket (1/4″-20 with Locating Pins) – Black（TA-AMB3-B）1 x Tilta F970 Battery Plate V2 – Black（TA-BTP2-F970-B）1 x Alley Key（32123.00071.00.00） Control Handle Kit / K21 x Nucleus Nano II Hand Wheel Controller （12009.00002.00.00）1 x Nucleus Nano II Control Handle（12009.00003.00.00）2 x Nucleus Nano II Motor Kit（12009.00001.00.00）2 x Photographic Lens Follow Focus Gear Ring（FR-T03）2 x USB-C Power Cable (30cm)（21114.00061.00.00）1 x P-Tap to USB-C Power Cable (50cm)（TCB-PTAP-USBC-50）2 x Aluminum Rod 15*150mm – Black（R15-150-B)1 x 15mm Rod Holder to Dual 1/4″”-20 Adapter – Black（12013.00010.00.00）1 x Tilta Accessory Mounting Bracket (1/4″”-20 with Locating Pins) – Black（TA-AMB3-B）1 x Tilta F970 Battery Plate V2 – Black（TA-BTP2-F970-B）1 x Allen Key（32123.00023.00.00）1 x Instruction Manual 1 x Advanced Soft Carrying Case for Nucleus Nano II1 x Tilta Rubber Rod Support (11013.00759.00 .00）1 x Alley Key（32123.00071.00.00）

TILTA Nucleus-M II Motor KitSKU: WLC-T06-MKThe newly redesigned wireless motors have been updated with a new streamlined UI and color coded LED indicators make it easier than ever for users to control their lenses wirelessly. These motors are smaller with the same amount of torque, which makes them perfect for use on gimbals, steadicams, or any other support system where total weight plays an important factor. Filmmakers upgrading from previous systems will find full compatibility with existing Nucleus-Series Wireless Controllers and Motors, enabling a gradual upgrade path for users who cannot fully upgrade all at once. This Motor Kit includes a 7-Pin to 7-Pin EXT Cable which makes it easy to integrate this additional motor into an existing setup. Included are two Rod Mounts which support 15mm and 19mm rods.FeaturesCUSTOM DESIGNED for Nucleus Series Systems like the Nucleus-M II and Nucleus Nano IIHIGH PERFORMANCE Design Delivers Five Times the Torque of its PredecessorCOMPATIBLE with 15/19mm Rods and Lenses with 0.8M Pitch Gears7-PIN EXT PORTS for Power Input/Output and Supports Power Pass-through for Multiple MotorsCOLOR CODED LED Indicator Shows Currently Assigned Motor FunctionIn the box1 x Nucleus-M II Motor（WLC-T06-M) including：1 x Nucleus-M II Motor（with 0.8 Mod Motor Gear 12009.00009.00.00)1 x Nucleus-M II Motor Rod Mount (15mm)（21109.00011.00.00)1 x Nucleus-M II Motor Rod Mount (19mm)（21109.00012.00.00)1 x Nucleus-M II 7-Pin to 7-Pin Connection Cable (30cm)（WLC-T06-7P-30)