8Sinn SSD Holder for Samsung T5 on 15mm Rod Mount SKU: 8-SSDH ST5 ROD Holder has been designed espacialy for Samsung T5 portable SSD drive. It is a usefull and essential accessory for everyday work with Blackmagic Pocket Cinema Camera 4K. 8Sinn SSD Holder for Samsung T5 on 15mm Rod Mount is a sturdy band, which precisely encloses drive`s circuit and gives the user sens of safety. Holder`s set includes the USB-C cable clam system what can be reversible. Set includes: 1 x 8Sinn SSD Holder for Samsung T5 on 15mm Rod Mount1 x USB-C cable holder
MID49 ARCA Backpack (Canon C400, C300mkII, C500mkII)SKU: M49-DB-PP-ABPCARCA Backpack (Canon C400, C300mkII, C500mkII) is an ARCA standard clamp that attaches to the back of the Canon C400, Canon C300mkIII, and Canon C500mkII. It's primary function is to hold the power distribution module DB-10 but it can also be used with any ARCA standard product like the ARCA Top Plate (114mm), ARCA Top Plate (215mm), or even the ARCA Top Handle.
MID49 ARRI 3/8-16 To Canon Striped Rosette/ Canon Mic Mount SKU: M49-CAG-ARR-CSR ARRI 3/8-16 to Canon Striped Rosette/ Canon Mic Mount attaches to any ARRI 3/8-16 threaded hole with locating pins and provides a 1/4-20 Canon striped rosette mount for attaching Canon's viewfinder clamp system or similar accessories. Side M4 holes are available for attaching Canon's microphone shockmount included with the C400, C300mkIII, C70, and many other "C" series cameras.
MID49 ARRI 3/8-16 to M4x20mm Offset AdapterSKU: M49-CBL-BRK-38M4ARRI 3/8-16 to M4x20mm Offset Adapter is a grid of M4 holes spaced 20mm apart with a 3/8-16 screw and locating pins in ARRI spacing. Locating pins can be removed and repositioned if needed. Compatible with the EVF/LCD Extension Cable (Sony Burano, FX9, FX6)
MID49 ARRI Dovetail (12", For OConnor 2060, 2560, 2575, 120EX)SKU: M49-BSL-2060-12ARRI Dovetail (12", For OConnor 2060, 2560, 2575, 120EX) is an ARRI standard dovetail on top and an OConnor standard dovetail on the bottom with a 12-inch length, end to end. Center 1/4-20 and 3/8-16 threaded holes allow the dovetail to be attached to any other tripod plate like Sachtler, Manfrotto, Ronford Baker, Miller, etc. Safety stoppers and push button release mechanisms are on each end for easy attachment and removal. The top safety stoppers catch every type of ARRI dovetail clamp, including thinner variations like the Baseline 15mm Baseplates, Wooden Camera baseplates, and other 3rd party products.
MID49 Breakout Box Rear Mounting Bracket SKU: M49-BOB-RMB-38 Breakout Box Rear Mounting Bracket (ARRI 3/8-16) attaches by two M4 screws to the side of the EXT Breakout EB-1 (RED Komodo, Komodo-X, V-Raptor) and allows mounting via 3/8-16 screw with ARRI locating pins.Not compatible with Audio Breakout AB-1 (RED Komodo-X, V-Raptor, ARRI Alexa Mini). Weight: 10gDimensions (WxLxH): 20 x 27 x 12mm
MID49 Breakout Box Side Mounting Bracket SKU: M49-BOB-SMB-38 Breakout Box Side Mounting Bracket (ARRI 3/8-16) attaches by two M4 screws to the side of the Audio Breakout AB-1 (RED Komodo-X, V-Raptor, ARRI Alexa Mini) and allows mounting via 3/8-16 screw with ARRI locating pins.Not compatible with EXT Breakout EB-1 (RED Komodo, Komodo-X, V-Raptor). Weight: 15gDimensions (WxLxH): 27 x 24 x 28mm
MID49 DB-4 Camera Mount Only (Canon C80)SKU: M49-DB4-CMDB-4 Camera Mount Only (Canon C80) attaches to the DB-4 Power Distribution Boxes to mount on the back of the Canon C80 via the shoe mount of the C80 using locking pins and pressure.
MID49 Gimbal Bottom ARCA Adapter (DJI Ronin 2)SKU: M49-GMB-BOT-DJIGimbal Bottom ARCA Adapter (DJI Ronin 2) quickly attaches to any Baseline ARCA Dovetail listed below and provides a bottom DJI Ronin 2 dovetail interface. Quick to install and remove without tools. Sliding ARCA interface allows for further balancing over a fixed dovetail plate.Compatible ARCA SystemsBaseline ARCA Dovetail (7.5mm Height)Baseline ARCA Dovetail (12mm Height)Baseline ARCA Dovetail (14.5mm Height)Baseline 15mm LW Baseplate (Sony Burano, FX6, Venice, Venice 2, Rialto / Blackmagic URSA Cine LF, URSA Mini)Baseline 15mm LW (Canon C400, C300 MK III, C500 MK II, C200, C200B, C700 / Blackmagic Pocket 6K / Kinefinity MAVO Mark 2 Baseplate)Baseline 15mm LW (Sony FX9, FS7, FS7mkII / Canon C100mkII, C300mkII, C100, C300, C500 Baseplate)Baseline 15mm LW (RED KOMODO, KOMODO-X / Blackmagic Pocket 4K / FREEFLY Ember S5K Baseplate)Baseline 15mm LW (RED V-Raptor Baseplate)Baseline 15mm LW (Sony FS5, Panasonic EVA1, VariCam LT, VariCam 35 Baseplate)Upper Cage for Canon C70Upper Cage for Canon C80Upper Cage for Blackmagic Cinema Camera 6K (Full Frame, Pocket Pro, Pocket G2)Upper Cage for FUJIFILM GFX100 II
Gimbal Bottom ARCA Adapter (DJI S, RS2, RS3, RS4)SKU: M49-GMB-BOT-DJI-RSGimbal Bottom ARCA Adapter (DJI S, RS2, RS3, RS4) quickly attaches to any Baseline ARCA Dovetail listed below and provides a bottom DJI Ronin RS4 dovetail interface, including the linear gear for fine-tuning balance. For wide camera bodies, side-to-side adjustment can be achieved by loosening the screws on the bottom. Quick to install and remove without tools. Sliding ARCA interface allows for further balancing over a fixed dovetail plate. The RS4 dovetail shape is also compatible with older DJI gimbals including Ronin S, RS2, and RS3, as well as some Manfrotto dovetail clamps.Compatible ARCA SystemsBaseline ARCA Dovetail (7.5mm Height)Baseline ARCA Dovetail (12mm Height)Baseline ARCA Dovetail (14.5mm Height) Baseline 15mm LW Baseplate (Sony Burano, FX6, Venice, Venice 2, Rialto / Blackmagic URSA Cine LF, URSA Mini) Baseline 15mm LW (Canon C400, C300 MK III, C500 MK II, C200, C200B, C700 / Blackmagic Pocket 6K / Kinefinity MAVO Mark 2 Baseplate) Baseline 15mm LW (Sony FX9, FS7, FS7mkII / Canon C100mkII, C300mkII, C100, C300, C500 Baseplate)Baseline 15mm LW (RED KOMODO, KOMODO-X / Blackmagic Pocket 4K / FREEFLY Ember S5K Baseplate)Baseline 15mm LW (RED V-Raptor Baseplate) Baseline 15mm LW (Sony FS5, Panasonic EVA1, VariCam LT, VariCam 35 Baseplate) Upper Cage for Canon C70 Upper Cage for Canon C80 Upper Cage for Blackmagic Cinema Camera 6K (Full Frame, Pocket Pro, Pocket G2) Upper Cage for FUJIFILM GFX100 II
Vocas Weight 1 kg for 15 mm rails SKU: 0370-0220 This 1 kg stainless steel counter weight can be mounted directly on to any standard 15 mm rails.
Vocas Canon EOS C200 dovetail adapter plate for USBP MKII SKU: 0350-2260 Vocas Canon EOS C200 dovetail adapter plate for use with the USBP MKII
Vocas centre bracket SKU: 0350-1432 Vocas centre bracket can be used in any Vocas universal sliding tophandle system top plate when the handgrip is removed. This bracket can be used to mount the camera under any crane, robot arm or ergonomic devices such as the easy rig. Can be quickly mounted in the top plate without any tools and can also easily be adjusted in length direction for optimal balance. Features three 3/8” and two 1/4” threaded holes.
Vocas Shoulder pad standard for base plate MKII for Sony PXW-FS7 / FS7 II SKU: 0350-1710 For base plate MKII for Sony PXW-FS7 / FS7 II
Vocas Shoulder support compact for 15 mm rails SKU: 0370-0010 The Vocas Shoulder support compact can be used on the back of any 15 mm rails and is equiped with a soft rubber pad. The clamping block of this shoulder support can also be mounted upside down so the rails can go across the top of the shoulder support. This allows you to add additional accessories such as a counter weight behind the shoulder support to get an even more balanced setup.
Vocas Top handgrip Pro foot SKU: 0450-1450 Vocas Top handgrip Pro foot is a 82 mm Foot for the top handgrip Pro (0450-1400).
Vocas Top handgrip Pro rear foot SKU: 0450-1460 Vocas Top handgrip Pro rear foot is a 82 mm Rear foot for the top handgrip Pro (0450-1400). The Top handgrip Pro rear foot provides extra mounting options such as a 15 mm clamping block (0350-2010) and/or 19 mm dividable clamping block (0450-2010).
Wooden Camera 12inch Safety Dovetail with ARCASKU: A00874The Safety Dovetail opens up the option to use ARCA accessories like the Shoulder Plate to quickly add or remove accessories to the base of the dovetail. Threaded 1/4”-20 and 3/8”-16 holes across the center allow for wedge plates and other accessories to attach directly to the dovetail. This dovetail follows the ARRI standard and includes a safety catch on the end to prevent accidental camera removal.SpecificationsWeight: 389.2 gDimensions: 313.8 x 68 x 15.2 mm
Wooden Camera 2060/2575/120EX Dovetail (12) SKU: 143600 12 inch ARRI standard dovetail with safety catches on each end. Dovetail attaches natively to O'Connor 2060O'Connor 2575O'Connor 120EXSachtler Cine 30 2060/2575/120EX Dovetail Specifications Weight 610 gDimensions 304.8 mm x 95.2 mm x 23 mm
Wooden Camera A-Lock SKU: 144500 Mount for Quick Back and REDmote. Use to hang Quick Back or REDmote in alternative configurations. Attaches via 1/4-20 screws. 2 x 1/4-20 x 3/8" screw Weight 42 gDimensions 47.7 mm x 40.3 mm x 10.3 mm
Wooden Camera Accessory Plate System SKU: A00434 Customize your rig with Wooden Camera’s Accessory Plate Kit, bundling multiple sizes of cheese plates with a unique mini rail and a hinge system. Securely mount items like your focus MDR, Accessory Cube, WC Battery Plates, and more to any camera rig using the variable options in this kit including the 3/8-16 screw mount with locating pins, lightweight 15mm mount with screw mounts and compatible hinge system that promise maximum stability and configurability. In addition to providing the maximum customization to your rig, our Accessory Plate System provides a sleek and unobtrusive design featuring a matte black finish. Each Accessory Kit contains four cheese plates in the following increments: 5”x5”, 3”x5”, 2”x5” and 2”x2”. All four plate sizes include multiple mounting points to configure the Mini Accessory Rails in different ways. This allows the user to adjust placement and maximize the ergonomics of each camera build. The threading size for the Accessory rail attachments is M2.5. Included Items Bolt-On Accessory Rail ClampUniversal Dual Rod Clamp for Bolt-On AccessoriesUniversal Accessory Hinge (3/8"-16 Male x 3/8"-16 Female)28mm Offset Bracket with Pins (3/8"-16 Male x 3/8"-16 Female)Mini Accessory Rail Kit with Safety (100 mm)Mini Accessory Rail Kit with Safety (60 mm)Mini Accessory Rail Kit with Safety (40 mm)Accessory Plate (12,70 cm x 12,70 cm)Accessory Plate (7,62 cm x 12,70 cm)Accessory Plate (5,08 cm x 12,70 cm)Accessory Plate (5,08 cm x 5,08 cm)
Wooden Camera Bag Of Screws SKU: 173800 An assortment of Wooden Camera's most common 1/4-20 screws used for Handles, NATOs, Rod Clamps, Shoulder Rigs, and more. 4 of each screw type are included. 1/4-20 x 1/4 socket cap1/4-20 x 3/8 socket cap1/4-20 x 3/8 button head1/4-20 x 1/2 socket cap1/4-20 x 5/8 button head1/4-20 x 3/4 socket cap1/4-20 x 7/8 button head1/4-20 x 1 socket cap
Wooden Camera Bolt-On Canon EVF Adapter for Ultra HandlesSKU: A00785Securely attach the 15mm EOS C400 EVF Adapter directly to the Ultra Handle Front Riser or the front of the 1” Ultra Handle Extension when using the Ultra Handle 5” Kit. Attaches with a 3/8”-16 mounting screw using a 3/16 Hex and provides two 3/8”-16 mounting points in addition to the Canon EVF mount.
Wooden Camera Bolt-On Hook and Loop Plate Kit SKU: A00436 Customize your rig with Wooden Camera’s Bolt-On Hook and Loop Plate System, bundling three sizes of Bolt-On Hook and Loop plates. Securely mount items like your focus MDR or Timecode Box to any camera rig using the variable options in this kit including two plates consisting of 3/8-16 screw mounts with locating pins, and a 1/4-20 version. In addition to providing the maximum customization to your rig, our Hook and Loop Plate Kit provides a sleek and unobtrusive design featuring a matte black finish. Each Kit contains 3 Hook and Loop plates in the following increments: 4”x1.5” and 2 versions of 2”x2” plates. Included Items Bolt-On Mini Hook and Loop Plate (3/8"-16)Bolt-On Small Hook and Loop Plate (3/8"-16)Bolt-On Mini Hook and Loop Plate (1/4"-20)