MID49 Baseline ARRI Dovetail SKU: M49-BSL-ARR-0 Baseline ARRI Dovetail is the lower ARRI mounting plate included in the Baseline 15mm LW series. Attaches to tripod plates or ARRI standard bridgeplates with centered or offset screw spacing. 1/4-20 and 3/8-16 threaded holes available in standard spacing. Thin dovetail design and stopper screws are designed specifically for the Baseline series and are not for mounting bridgeplates directly. Weight: 66gDimensions (WxLxH): 67 x 140 x 6mm
MID49 Baseline Bridgeplate 15mm StudioSKU: M49-BSL-BRP-15S Baseline Bridgeplate (15mm Studio) is a quick-release, ARRI standard bridge plate that, when combined with Baseline 15mm LW baseplates, provides 15mm studio offset rods at the correct distance from the center of the lens. ARRI dovetail slot on the bottom attaches to ARRI standard dovetails using a top-load locking mechanism. Unlock the lever like a traditional bridge plate, pull the safety release, then further move the lever, which allows the camera to be released vertically from the dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the lever. Baseline Bridgeplates can also be installed and removed from the back of most ARRI standard dovetails. Included (2) 3/8-16 and (2) 1/4-20 screws can be installed using the center screw channel into the offset screw holes on the Baseline ARRI Dovetail.
MID49 Baseline Bridgeplate 19mmSKU: M49-BSL-BRP-19 Baseline Bridgeplate (19mm) is a quick-release, ARRI standard bridge plate that, when combined with Baseline 15mm LW baseplates, provides 19mm rods at the correct distance from the center of the lens. ARRI dovetail slot on the bottom attaches to ARRI standard dovetails using a top-load locking mechanism. Unlock the lever like a traditional bridge plate, pull the safety release, then further move the lever, which allows the camera to be released vertically from the dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the lever. Baseline Bridgeplates can also be installed and removed from the back of most ARRI standard dovetails. Included (2) 3/8-16 and (2) 1/4-20 screws can be installed using the center screw channel or by two offset holes when using some ARRI brand products.
MID49 Baseline Core (FUJIFILM GFX ETERNA)SKU: M49-BSL-LWB-FUJEBaseline Core (FUJIFILM GFX ETERNA) is the baseplate riser that attaches to the bottom of the camera by three 3/8-16 screws. An optional 15mm Bracket can be purchased separately or as a complete baseplate kit. ARRI dovetail slot on the bottom attaches to ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew.To attach the Core to a tripod or bridgeplate, the Baseline ARRI Dovetail is required, which is an ARRI mounting plate with 1/4-20 and 3/8-16 threaded holes. The dovetail can be purchased separately or as a complete baseplate kit. ARRI M6 rosette on the right side allows the attachment of a camera side handle or optional ARRI Rosette to NATO Rail for additional accessory mounting options. This Baseline Baseplate does not have an upper ARCA slot but has ARCA geometry hidden on the bottom, which will accept the Gimbal Bottom ARCA Adapter (DJI S, RS2, RS3, RS4), Gimbal Bottom ARCA Adapter (DJI Ronin 2), and Gimbal Bottom ARCA Adapter (Freefly Mōvi Pro). These adapters enable quick and tool-free transition from tripod to gimbal modes.
MID49 Baseline Core 15mm LW (0mm Platform Height) SKU: M49-BSL-LWB-0 Baseline Core 15mm LW (0mm Platform Height) holds two 15mm rods at 15mm lightweight spacing when combined with the camera dovetails listed below. "0mm" platform height refers to the distance from the center of the 15mm rods to the bottom of the ARCA dovetail. Combine with the below Baseline ARCA Dovetails and listed cameras for lightweight 15mm rods at the correct lens height. Baseline ARCA Dovetail (7.5mm Height) Sony FX9, FS7, FS7mkIICanon C100, C300, C500, C100mkII, C300mkII Baseline ARCA Dovetail (12mm Height) Sony FX6, Venice, Venice 2, Rialto, F55, F5Blackmagic URSA Mini, Mini Pro, Mini Pro 12K Technical data Product Weight: 156gProduct Dimensions (WxLxH): 123 x 93 x 30mm
MID49 Baseline Core 15mm LW (13mm Platform Height) SKU: M49-BSL-LWB-13 Baseline Core 15mm LW (13mm Platform Height) holds two 15mm rods at 15mm lightweight spacing when combined with the camera dovetails listed below. "13mm" platform height refers to the distance from the center of the 15mm rods to the bottom of the ARCA dovetail. Combine with the below Baseline ARCA Dovetails and listed cameras for lightweight 15mm rods at the correct lens height. Baseline ARCA Dovetail (7.5mm Height) Canon C300mkIII, C500mkII, C200, C200B, C700, Blackmagic Pocket 6K, Kinefinity MAVO mark2 Baseline ARCA Dovetail (12mm Height) Sony FS5, Panasonic EVA1, VariCam LT, VariCam 35 Technical data Product Weight: 166gProduct Dimensions (WxLxH): 123 x 93 x 37mm
MID49 Baseline Core 15mm LW (23mm Platform Height) SKU: M49-BSL-LWB-23 Baseline Core 15mm LW (23mm Platform Height) holds two 15mm rods at 15mm lightweight spacing when combined with the camera dovetails listed below. "23mm" platform height refers to the distance from the center of the 15mm rods to the bottom of the ARCA dovetail. Combine with the below Baseline ARCA Dovetails and listed cameras for lightweight 15mm rods at the correct lens height. Baseline ARCA Dovetail (7.5mm Height) RED V-Raptor Baseline ARCA Dovetail (14.5mm Height) RED Komodo, Komodo-X / Blackmagic Pocket 4K Technical data Product Weight: 166gProduct Dimensions (WxLxH): 123 x 83 x 47mm
SHAPE 15mm LWS Baseplate for Sony Burano SKU: B15BUR SHAPE is introducing its brand new line of products for the Sony Burano, starting with its dedicated baseplate, specifically designed for the Burano. The baseplate is constructed from durable CNC-machined aluminum, ensuring strength and reliability. This baseplate is a practical accessory for Sony Burano users, providing stability and adaptability for your camera rig. Attaches directly underneath the camera: This baseplate is designed to securely attach to the bottom of your Sony Burano camera using 2x 3/8’’-16 screwsDetachable 15mm LWS bottom baseplate: The baseplate can be easily removed or attached as needed, providing flexibility for your camera setupMounting threaded holes: It features threaded holes that allow you to securely mount your camera onto a tripod plateFront and back ratchet knobs: These knobs ensure a tight and stable connection to the rodsPair of 12’’ rods included: The baseplate comes with two 12-inch rods, which can be used for additional accessories or attachments.
SHAPE REVOLT VCT Universal Baseplate SKU: BP10 The SHAPE REVOLT VCT Universal Baseplate offers a unique design created for professional cameras. It is made of a sturdy and lightweight support system, compatible with different lens adapters from Sony, Canon, RED, Panasonic, Blackmagic, ARRI and many other camera models with interchangeable lenses. Features "Front to Back Sliding Plate” providing you with a quick positioning of your camera accessories for an optimal adjustment of your camera’s balance center.Easy adjustment of the rod bloc height to match the optical center of your camera.Front and rear rod blocs can be fixed to the baseplate allowing you to install more accessories.Integration of sophisticated tool box for a quick access to your Allen Key and extra screws.Safety Pins and Ratchet knobs to prevent the plate from sliding, to secure the rods and to increase the strength of your rig.Soft & Ergonomic Shoulder Mount Shape BP10 is compatible with ARRI (Amira and Alexa Mini)SONY (FS7, FS7M2, F5, F55, EX1, EX3)CANON (C300, C300M2, C700)RED SERIESPANASONIC (Panasonic Cinema Varicam Lt 4k S35, Panasonic Ag-af100, Panasonic Ag-af101 Varicam Lt, Panasonic P2)BLACKMAGIC (Blackmagic Ursa Mini)and many other camera models with Interchangeable Lenses
Shape SONY FS5 BASEPLATESKU: FS5BASE SHAPE designed SONY FS5 BASEPLATE that would fit with all the key features of the Sony PXW-FS5. Built small and lightweight, this baseplate is a perfect solution for this camera. Included with the baseplate 1 x 1/4-20 captive screw1 x 3/8-16 captive screw to secure the camera’s position in translation and rotation so it won’t move. At the top of the baseplate there are rubber pads so that the camera doesn’t sit directly on the aluminum. The baseplate fits 15mm standard rods, and the rods are secured with a red ratchet knob screw. On the side, you have 1/4-20 threaded holes for mounting options. Under the baseplate, four (4) 1/4-20 and two (2) 3/8-16 threaded holes were added to allow you to attach a tripod plate. To reduce the weight of the baseplate, we removed excess aluminium from the bottom of the plate during the machining process. The baseplate includes a set of 15mm 10 inch rods. It’s perfect for drone and gimbal application, and it’s designed with a lightweight system for mounting any standard 15 mm accessories. Features 1/4-20 treaded holes for side mounting3/8-16 and 1/4-20 captive screw to secure the camera position both rotation and translation4x 1/4-20 and 2x 3/8 holes under the baseplate for tripod mountingRods are positioned to reach optical centerRubber pads on top of the baseaplate to cushion camera baseLightweight and solidCNC aluminumRemovable bracket for METABONES adaptor can be installed
Shape Sony FX6 15 mm base SKU: B15FX6 The Shape Sony FX6 15 mm base is the lightweight baseplate with a 15 mm rod system is designed to match the Sony FX6 optical center. It features two attachment points (1/4-20 and 3/8-16) for securely mounting the Sony FX6 body. The baseplate also comes with a pair of 15 mm rods that are 12” long through the length of the baseplate. The bottom of the plate features several 1/4″-20 and 3/8″-16 mounting holes for mounting and balancing your camera on equipment like a tripod. Features Attaches underneath the camera with 3/8″-16 and 1/4″-20 screws Comes with an adapter plate Comes with (1 pair) 15 mm 12″ rods Mounting holes for securing the camera or a tripod plate Ratchet key knobs to secure rods removable rod bloc system at each end of the riser Rubber pads at the top of the base to protect your SONY FX6 Made of CNC aluminum In the box 1 x Sony FX6 15 mm base1 x 15 mm 12″ rods (1 pair)
TILTA 19mm Studio Tilta Standard to Arri StandardThis 19mm studio baseplate is designed to adapt a Tilta standard baseplate to an Arri standard baseplate to allow you to use your camera rig on an Arri standard-sized dovetail. The top section of the baseplate that allows for this function can also be removed and replaced with a flat top, which allows it to double as a regular Arri standard-sized baseplate. It uses a hard-anodized surface design and is CNC-milled from a lightweight and durable high-impact aluminum 7075 alloy. ADAPT - TILTA Standard Baseplates To ARRI Standard DovetailsDOVETAIL SUPPORT - Slides and Locks onto ARRI Standard Dovetails19MM ROD SUPPORT - Secure 19mm Studio Rods to your System for Various AccessoriesUNIVERSAL - Design Allows you to Use this Baseplate with Most Camera SystemsHEAVY DUTY - Aluminum and Steel Construction
TILTA 19mm Studio Tilta Standard to Arri StandardThis 19mm studio baseplate is designed to adapt a Tilta standard baseplate to an Arri standard baseplate to allow you to use your camera rig on an Arri standard-sized dovetail. The top section of the baseplate that allows for this function can also be removed and replaced with a flat top, which allows it to double as a regular Arri standard-sized baseplate. It uses a hard-anodized surface design and is CNC-milled from a lightweight and durable high-impact aluminum 7075 alloy. ADAPT - TILTA Standard Baseplates To ARRI Standard DovetailsDOVETAIL SUPPORT - Slides and Locks onto ARRI Standard Dovetails19MM ROD SUPPORT - Secure 19mm Studio Rods to your System for Various AccessoriesUNIVERSAL - Design Allows you to Use this Baseplate with Most Camera SystemsHEAVY DUTY - Aluminum and Steel Construction
Vocas Base plate MKII for Sony PXW-FS7 / FS7 II / FX9 SKU: 0350-1700 Vocas Base plate MKII transforms the Sony PXW-FS7 / PXW-FS7 II camera into a true shoulder camera and make the camera compatible with many other support systems. The base plate MKII Vocas 0350-1700 can be mounted to the camera after removing the original Sony shoulder pad. Base plate MKII features an adjustable rubber shoulder pad, fixed rosette attachment, VCT-14 adjustment and 15 mm rails in the front and back. Includes 1 piece Separate Dovetail plate, 1 piece Separate Flat base plate SHORT and 1 set of 15 mm rails. The weight of this support (without rails) is 580 grams. Note: When using the Vocas BP-18 19 mm balance plate (0480-0018) in combination with this base plate, the Flat base plate (0350-1020) is required.
Vocas Basic kit for Sony Burano SKU: 0255-4100 Basic kit for Sony Burano camera combines the popular Vocas USBP 15 MKII (0350-2200) base plate with the top plate (0350-1810), which is compatible with the Original Burano tophandle and the Sony FX9 tophandle. The top plate offers you multiple pin lock connection points on top of your camera for 1/4” and 3/8” accessories. In the box 1 x Vocas USBP-15 MKII1 x Vocas Top Cheese Plate for Sony Burano with original tophandle or Sony FX9 tophandle
Vocas BP-18 19 mm Balance plate SKU: 0480-0018 19 mm Balance plate which provides optimal balance for heavy duty camera setups. Compatible with a variety of high end cinema cameras. The camera attachment screws of the BP-18 are by default exactly centred. By rotating the centre top part, the camera attachment screws are positioned according to the industry standard off centre position. Standard rosettes are integrated on both sides of the plate. The industry standard dovetail connection and 19 mm rails make it ideal to support a heavy duty camera/lens/matte box setup. The optional dovetail shoulder support (0480-0030) can be used to switch easily from tripod to shoulder setup. Technical data Rosette: 2 IntegratedBars position: Front , RearBars system: 19 mmCamera mounting points: 2Package included: 0480-8400 19 mm rail (2x), 0480-0101 dovetail plateMaterial: AluminumColor: BlackWeight: 1,275 g
Vocas BP-19 MKII SKU: 0480-0019 The BP-19 MKII is part of the Vocas Sliding System, a revolutionary new way to mount cameras to different setups, while balancing the camera optimally. The heart of this system is the universal camera adapter plate (0350-2250). This plate can be attached to almost any camera, and provides the camera with a mini dovetail connection. This allows the camera to slide on and off the various Vocas products that are bases on this mini dovetail system, like the USBP-15 MKII (0350-2200), USBP-19 MKII (0350-2205), BP-19 MKII (0480-0019) and Quick release dovetail plate (0350-2220). All of these products are equiped with a quick release lever, making it possible to find optimal balance for your setup within seconds, without using any tools. A real benefit when changing lenses a lot. Furthermore, it’s easy to switch between 15 mm setups, 19mm setups, drones, gimbals or any other conceivable setup that incorporates the quick release dovetail plate (0350-2220). The height adjustable front rails of the BP-19 MKII provide compatibility with almost any camera! Included in the set, is a short balance dovetail plate (0350-2020), to mount the 19 mm setup directly to any tripod. By using the BP-19 MK II, both the integrated sliding system on the upper side of the plate and the balance dovetail plate, offer you lots of stability and balancing options. Optional items for the BP-19 MKII Spare dovetail plate 295mm V2 (0480-0101). Long dovetail plate to extend the range of balancing on tripod.Dovetail shoulder support (0480-0030), to convert the BP-19 MKII into the USBP-19 MKII. Included in the box BP-19 MKII Camera adapter plate (0350-2250) Short balance dovetail plate (0350-2020) 2x Carbon 19 mm rail. Length; 400 mm. (1 pc.) (0480-0400)
Vocas BP-19 MKII with 295 mm long dovetail plateSKU: 0480-0021 The BP-19 MKII is a 19 mm, height adjustable balance plate with a unique quick release balancing system to find optimal balance and stability with all kind of different camera/lens combinations. The BP-19 MKII is part of the Vocas Sliding System, a revolutionary new way to mount cameras to different setups, while balancing the camera optimally. The heart of this system is the universal camera adapter plate (0350-2250). This plate can be attached to almost any camera, and provides the camera with a mini dovetail connection. This allows the camera to slide on and off the various Vocas products that are bases on this mini dovetail system, like the USBP-15 MKII base plates and Quick release dovetail plate (0350-2220). All of these products are equipped with a quick release lever, making it possible to find optimal balance for your setup within seconds, without using any tools. A real benefit when changing lenses a lot. Furthermore, it’s easy to switch between 15 mm setups, 19mm setups, drones, gimbals or any other conceivable setup that incorporates the quick release dovetail plate (0350-2220). The height adjustable front rails of the BP-19 MKII provide compatibility with almost any camera! Included in the set, is a 295 mm long balance dovetail plate (0480-0101), to mount the 19 mm setup directly to any tripod. By using the Vocas BP-19 MK II, both the integrated sliding system on the upper side of the plate and the balance dovetail plate, offer you lots of stability and balancing options.Included in the boxBP-19 MKIICamera adapter plate (0350-2250)295 mm long balance dovetail plate (0350-2020)2x Carbon 19 mm rail. Length; 400 mm. (0480-0400)
Vocas Camera Adapter Plate for Arri Alexa 35 SKU: 0350-2285 Vocas Camera Adapter Plate for Arri Alexa 35 is a camera adapter plate that attaches directly under the Arri Alexa 35 allowing our widely available USBP sliding system to be used with this camera. Vocas USBP sliding systems allows quick balancing of the camera while at the same time allowing a rapid change (without tools) between Gimbal-, Steadicam 15 mm- and 19mm setups.
Vocas Lightweight base plateSKU: 0350-1900 15 mm Universal Lightweight Shoulder Base Plate to convert many cameras into a shoulder mounted camera that attaches directly to VCT-14 style quick release plates. The height adjustable front rails of the LWBP provide compatibility with almost any camera! The bottom of the plate is equipped with magnets, to mount a variety of shoulder pads to multiple positions underneath the base plate.Optional items for the LWBPSoft shoulder pad (0350-2320)The flat base plate (0350-2031) makes the LWBP directly compatible with tripods with ENG wedge plates. Multiple 1/4’’ and 3/8’’ threaded holes are integrated on the bottom of this plate, giving options to mount any other tripod plate to this systemIncluded in the boxLWBP base plateShoulder pad standard (0350-2310)2x Aluminum 15 mm rail. Length; 210 mm. (0350-9210)
Vocas Lightweight base plate with soft shoulder padSKU: 0350-1900-0215 mm Universal lightweight shoulder Base Plate with soft shoulder pad to convert many cameras into a shoulder mounted camera that attaches directly to VCT-14 style quick release plates. The height adjustable front rails of the LWBP provide compatibility with almost any camera! The bottom of the plate is equipped with magnets, to mount a variety of shoulder pads to multiple positions underneath the base plate.Optional items for the LWBPShoulder pad standard (0350-2310)The flat base plate (0350-2031) makes the LWBP directly compatible with tripods with ENG wedge plates. Multiple 1/4’’ and 3/8’’ threaded holes are integrated on the bottom of this plate, giving options to mount any other tripod plate to this systemIncluded in the boxLWBP base plateShoulder pad soft (0350-2320)2x Aluminum 15 mm rail. Length; 210 mm. (0350-9210)
Vocas Pro rail support 15 mm Type P SKU: 0350-0900 The Vocas Pro rail support 15 mm Type P is a compact support which provides compact and medium cameras with front and even rear bars at the same time! For tripod use the V-lock adapter plate (0350-2041) can be mounted to the support (optional).The height of the Pro rail support can be adjusted so it will be suitable for cameras such as Sony PXW-FS5, Panasonic AU-EVA1 and Canon EOS C200.
Vocas Pro rail support 15 mm Type QSKU: 0350-091015 mm Pro rail support type R, specifically designed for compact (DSLR) cameras with a central 1/4'' thread hole. This light weight and compact rail support has an adjustable rail height, for all cameras where the lens mount is 33 mm to 51 mm above the camera base. Two pins at the front of the rail support prevent the camera from twisting. For VCT-14 quick release plate use the optional V-lock adapter plate 0350-2041For shoulder pad use the optional 0370-0010
Vocas Sony PXW-FS7 / FS7 II camera adapter plate for USBP MKII SKU: 0350-2255 Sony PXW-FS7 / PXW-FS7 II camera adapter plate for USBP MKII.