8SINN 15MM BASEPLATE + RISER PLATE I + 8SINN 10" ARRI DOVETAIL PLATEThe Base Plate, Riser Plate, and Arri Dovetail Plate -  The first two items used together with one of the cages listed below will help you to obtain the standard, 85mm optical center for those cameras. The whole configuration is put on the Arri Dovetail Plate for maximizing the balance if required. In the end, this three-piece system provides you with many features and the opportunity for further development.The presented Riser Plate allows obtaining the optical center when used with the following cages8Sinn Z CAM E2-S6/F6/F8 Cage8Sinn Z CAM E2 Cage8Sinn Sony a7III / a7RIII Cage8Sinn Sony A7RIV Cage 8Sinn Cage for Sony a7SIII8Sinn BM Pocket Cinema Camera 4K / 6K Cage8Sinn BM Pocket Cinema Camera 4K / 6K Half Cage8Sinn Cage for Red® Komodo RED® Raptor (83.4mm)8Sinn Cage for RED Komodo / Komodo-X8Sinn Cage for Panasonic GH68Sinn Panasonic S1H Cage8Sinn Cage for Panasonic BS1H / BGH18Sinn Cage for Canon EOS R5C8Sinn Cage for Leica SL2 / SL2-SList of cameras compatible for optical center with the Riser Plate I without the cageSony FX6Set includes1pc 8Sinn 15mm Baseplate1pc 8Sinn Riser Plate I1pc 8Sinn 10" Arri Dovetail Plate

8Sinn 15mm Baseplate + Riser Plate I + 5" Arri Dovetail Plate 8Sinn accessories - Base Plate, Riser Plate used together with one of the cages listed below will help you to obtain the standard, 85mm optical center for those cameras. The whole configuration is put on the Arri Dovetail Plate for maximizing the balance if required. In the end, this three-piece system provides you with many features and the opportunity for further development. Compatibility The presented setup allows to obtain the optical center when used with the following cages: 8Sinn Z CAM E2-S6/F6/F8 Cage 8Sinn Z CAM E2 Cage 8Sinn Sony a7III / a7RIII Cage 8Sinn Sony A7RIV Cage 8Sinn Cage for Sony a7SIII 8Sinn BM Pocket Cinema Camera 4K / 6K Cage 8Sinn BM Pocket Cinema Camera 4K / 6K Half Cage 8Sinn Cage for Red Komodo Set includes 1 x 8Sinn 15mm Baseplate 1 x 8Sinn Riser Plate I 1 x 8Sinn 5" Arri Dovetail Plate Set's weight:  436g

8Sinn Arca Swiss Baseplate Kit + Arri Dovetail Plate 10” SKU: 8-15BP+8-RPII+8-ASP-RII+8-10ADP The 8Sinn Riser Plate II is designed to be combined with the included 8Sinn 15mm Baseplate and the 8Sinn Arca Swiss Plate, which is created specifically for it. All these products combined together form a set that is the base for the camera and allows quickly releasing and switching to handheld shooting. The Arca Swiss Plate is precisely shaped on the inside to be aligned with the safety locks on the Riser Plate II - there is a release pin on one side and a lever on the other. Thanks to this, when these items are connected, they’re secured from both sides. The long slot in the middle of the Arca Swiss Plate gives the ability of connecting it to a camera cage in ways adjusted to the threaded openings on the cage with the help of 1/4“ or 3/8“ mounting screws which are supplied. The 8Sinn 15mm Baseplate has two 32mm Arri Rosettes and 15mm rod openings. On the bottom, there are dovetail guide rails. Thus, the set can be connected with the 8Sinn 10" Arri Dovetail Plate and mounted on a tripod head. This makes a great solution for more complex camera rigs. Key features Safety locks on both sides Quick release system Compatible with DJI R Quick-Release Plate (Upper) 2 x 32mm Arri Rosettes 15mm rod openings Aluminum made Compatibility The presented Riser Plate allows obtaining the optical center when used with the following cages 8Sinn Z CAM E2-S6/F6/F8 Cage8Sinn Z CAM E2 Cage8Sinn Sony a7III / a7RIII Cage8Sinn Sony A7RIV Cage 8Sinn Cage for Sony a7SIII8Sinn BM Pocket Cinema Camera 4K / 6K Cage8Sinn BM Pocket Cinema Camera 4K / 6K Half Cage8Sinn Cage for Red® Komodo RED® Raptor8Sinn Cage for Panasonic GH68Sinn Panasonic S1H Cage8Sinn Cage for Canon EOS R5C8Sinn Cage for Leica SL2 / SL2-S Set includes 1 x 8Sinn 15mm Baseplate1 x 8Sinn Riser Plate II1 x 8Sinn Arca Swiss Plate1 x 8Sinn 10" Arri Dovetail Plate

8Sinn Arca Swiss Baseplate Kit + Arri Dovetail Plate 5” SKU: 8-15BP+8-RPII+8-ASP-RII+8-5ADP The 8Sinn Riser Plate II is designed to be combined with the included 8Sinn 15mm Baseplate and the 8Sinn Arca Swiss Plate, which is created specifically for it. All these products combined together form a set that is the base for the camera and allows quickly releasing and switching to handheld shooting. The Arca Swiss Plate is precisely shaped on the inside to be aligned with the safety locks on the Riser Plate II - there is a release pin on one side and a lever on the other. Thanks to this, when these items are connected, they’re secured from both sides. The long slot in the middle of the Arca Swiss Plate gives the ability of connecting it to a camera cage in ways adjusted to the threaded openings on the cage with the help of 1/4“ or 3/8“ mounting screws which are supplied. The 8Sinn 15mm Baseplate has two 32mm Arri Rosettes and 15mm rod openings. On the bottom, there are dovetail guide rails. Thus, the set can be connected with the 8Sinn 5” Arri Dovetail Plate and mounted on a tripod head. This makes a great solution for more complex camera rigs. Key features Safety locks on both sides Compatible with DJI R Quick Release Plate Quick release system 2 x 32mm Arri Rosettes 15mm rod openings Aluminum made Compatibility The presented Riser Plate allows obtaining the optical center when used with the following cages: 8Sinn Z CAM E2-S6/F6/F8 Cage8Sinn Z CAM E2 Cage8Sinn Sony a7III / a7RIII Cage8Sinn Sony A7RIV Cage 8Sinn Cage for Sony a7SIII8Sinn BM Pocket Cinema Camera 4K / 6K Cage8Sinn BM Pocket Cinema Camera 4K / 6K Half Cage8Sinn Cage for Red® Komodo RED® Raptor8Sinn Cage for Panasonic GH68Sinn Panasonic S1H Cage8Sinn Cage for Canon EOS R5C8Sinn Cage for Leica SL2 / SL2-S Set includes 1 x 8Sinn 15mm Baseplate1 x  8Sinn Riser Plate II1 x 8Sinn Arca Swiss Plate1 x 8Sinn 5" Arri Dovetail Plate

Chrosziel Light Weight Support for Panasonic AU-EVA1 Chrosziel Light Weight Support for Panasonic AU-EVA1, with extensible Shoulder Pad, 2 Hirth Rosettes, V-Lock Plate, 401-EVA1-03 Tripod Adapter Plate, 2 rods Ø 15mm, length 205mm, (Optional: 401-EVA1-R-01 Rear Rod Clamp) 480 grams onlyExtensible Shoulder PadWith V Lock and Tripod Adapter PlateHirth Rosettes for mounting accessory In the box 1 x Light Weight Support 401-EVA1 with extensible shoulder pad2 x Rods with 205 mm length and 15 mm diameter1 x V-Lock Adapter Plate1 x Tripod Adapter Plate1 x Allen Key

Chrosziel Bridge Plate DigiCine (19mm) Bridge Plate with Ø19mm rods, L= 440mm, for Sony F23, F35, F55, F65, Phantom Flex and with LWS as adaptor for Red Epic / Scarlet, Canon EOS C Series and other

Chrosziel C700-EXT-KIT Kit for Canon C700 Kit C700-EXT-KIT: Chrosziel’s unique Light Weight Support (401-C700) and the new Chrosziel Universal Handgrip Extender (403-40) turn your Canon C700 into a perfectly balanced shoulder-camera. Light-weight and easy to use, yet robust.

Chrosziel LWS with shoulder pad for Sony ILME-FX6 SKU: 401-FX6 Chrosziel Light weight support for Sony ILME-FX6, with integrated shoulder pad, 2 rosettes, VLockPlate, Tripod Adapter Plate, 2 rods Ø 15mm, l. 205mm. Specification: Weight 635 gramm incl. 15mm rodsDimensions 25 cm x 12 cm x 4cm

Chrosziel LWS for Sony Burano, Venice 2, Venice SKU: 401-VEN For those engaged in documentary and run-and-gun shooting, Chrosziel offers a lightweight, durable, and comfortable shoulder support. This essential accessory provides stability and ease of use, enabling filmmakers to capture captivating footage even in the most challenging environments. The Chrosziel Lightweight Support for Sony Burano, Venice 2, and Venice cameras features an integrated shoulder pad, two rosettes, and a 401-FS7/5-03 Tripod Adapter Plate. Rear rods are optional (401-FS7-5R-01).

Chrosziel LWS support for Sony Universal SKU: 401-50A Chrosziel Lens Support Bracket 15 Universal with two support stands with length 14 and 27 mm, combinable for all lenses with 1/4" and 3/8" threads. With QuickFit device for Ø 15mm rods.

Chrosziel Light Weight Support with shoulder pad for Sony PXW-FX9 SKU: 401-FX9 Chrosziel Light weight support for Sony PXW-FX9,with integrated shoulder pad. 2 rosettesV-Lock-Plate401-FS7/5-03 Tripod Adapter Plate2 rods Ø 15mmlength: 205mm

Chrosziel Standard Kit for Sony BURANO SKU: 401-BUR-STD-KITStandart Shoulder support (LWS) Sony Burano accessory consists of: 1x 401-BUR-TOP Top-Plate with 15mm rods1x 401-VEN LWS, integrated shoulder pad, Tripod Adapter Plate

Kondor Blue 15mm LWS ARRI/501 Side Loading BaseplateSKU: KB-BP501-FBMKondor Blue 15mm LWS Side Loading Baseplate with ARRI dovetails and Manfrotto 501-standard camera plateARRI-standard dovetail15mm LWS rod supportSide-load camera plate systemManfrotto 501 standard camera plate1/4"-20 and 3/8"-16 mounting screws1/4"-20 and 3/8"-16 tripod mount threadsAerospace Grade Aluminium Mount Types: 1/4"-20 and 3/8"-16 Male, 1/4"-20 and 3/8"-16 Female, ARRI-Standard DovetailDimensions: 12,70 cm x 10,16 x 8,89 cmWeight: 0,51kg

Baseline 15mm LW (Blackmagic PYXIS) SKU: M49-BSL-LW13-AC10 Baseline 15mm LW (Blackmagic PYXIS) is a baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens on the listed cameras. ARRI dovetail slot on the bottom attaches to the included Baseline ARRI Dovetail or other ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew.Baseline ARRI Dovetail is the included lower ARRI mounting plate which can attach to tripod plates using 1/4-20 or 3/8-16 screws or ARRI standard bridgeplates with centered or offset screw spacing. ARCA dovetail slot on top holds the included ARCA Dovetail and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten.Center screw slot on ARCA Dovetail accepts 1/4-20 and 3/8-16 mounting screws, and a vertical rod hole clamps included 1/4-20 lens support posts for adaptors like Metabones, etc. Rod Bracket (15mm LW)(sold separately) can be attached to the back of the baseplate for rear 15mm LW rod support.Weight: 346gDimensions (WxLxH): 123 x 140 x 45mm Individual components of this kit are also availableBaseline Core 15mm LW (13mm Platform Height)Baseline ARRI Dovetail

MID49 Baseline 15mm LW For Canon C400, C300 MK III, C500 MK II, C200, C200B, C700 / Blackmagic Pocket 6K / Kinefinity MAVO Mark 2 BaseplateSKU: M49-BSL-LW13-AC7 Baseline 15mm LW for Canon C400, C300 MK III, C500 MKII, C200, C200B, C700 / Blackmagic Pocket 6K / Kinefinity MAVO Mark 2 is a baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens on the listed cameras. ARRI dovetail slot on the bottom attaches to the included Baseline ARRI Dovetail or other ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew.Baseline ARRI Dovetail is the included lower ARRI mounting plate which can attach to tripod plates using 1/4-20 or 3/8-16 screws or ARRI standard bridgeplates with centered or offset screw spacing. ARCA dovetail slot on top holds the included ARCA Dovetail and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten.Center screw slot on ARCA Dovetail accepts 1/4-20 and 3/8-16 mounting screws, and a vertical rod hole clamps included 1/4-20 lens support posts for adaptors like Metabones, etc.Rod Bracket 15mm LW (sold separately) can be attached to the back of the baseplate for rear 15mm LW rod support.Individual components of this kit are also availableBaseline Core 15mm LW (13mm Platform Height)Baseline ARCA Dovetail (7.5mm Height)Baseline ARRI Dovetail

MID49 Baseline 15mm LW (FUJIFILM GFX ETERNA)SKU: M49-BSL-FUJE-LWBaseline 15mm LW (FUJIFILM GFX ETERNA) is a baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens and attaches to the bottom of the camera by three 3/8-16 screws. The center of the LW 15mm Bracket has a 1/4-20 vertical support post, which can be used to support lens adapters like Metabones, etc.ARRI dovetail slot on the bottom attaches to the included Baseline ARRI Dovetail or other ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew.Baseline ARRI Dovetail is the included lower ARRI mounting plate, which can attach to tripod plates using 1/4-20 or 3/8-16 screws or ARRI standard bridgeplates with centered or offset screw spacing. ==ARRI M6 rosette on the right side allows the attachment of a camera side handle or optional ARRI Rosette to NATO Rail for additional accessory mounting options.This Baseline Baseplate does not have an upper ARCA slot but has ARCA geometry hidden on the bottom, which will accept the Gimbal Bottom ARCA Adapter (DJI S, RS2, RS3, RS4), Gimbal Bottom ARCA Adapter (DJI Ronin 2), and Gimbal Bottom ARCA Adapter (Freefly Mōvi Pro). These adapters enable quick and tool-free transition from tripod to gimbal modes.Individual components of this kit are also availableBaseline Core 15mm LW (FUJIFILM GFX ETERNA)LW 15mm Rod Bracket (FUJIFILM GFX ETERNA)Baseline ARRI DovetailProduct Weight: 438g

MID49 Baseline 15mm LW (RED KOMODO, KOMODO-X / Blackmagic Pocket 4K / FREEFLY Ember S5K Baseplate) SKU: M49-BSL-LW23-AC14 Baseline 15mm LW (RED KOMODO, KOMODO-X / Blackmagic Pocket 4K / FREEFLY Ember S5K Baseplate) is a baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens. ARRI dovetail slot on the bottom attaches to the included Baseline ARRI Dovetail or other ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew. Baseline ARRI Dovetail is the included lower ARRI mounting plate which can attach to tripod plates using 1/4-20 or 3/8-16 screws or ARRI standard bridgeplates with centered or offset screw spacing. ARCA dovetail slot on top holds the included ARCA Dovetail and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten. Center screw slot on ARCA Dovetail accepts 1/4-20 and 3/8-16 mounting screws, and a vertical rod hole clamps included 1/4-20 lens support posts for adaptors like Metabones, etc. Rod Bracket (15mm LW) (sold separately) can be attached to the back of the baseplate for rear 15mm LW rod support. Individual components of this kit are also available: Baseline Core 15mm LW (23mm Platform Height)Baseline ARCA Dovetail (14.5mm Height)Baseline ARRI Dovetail Technical data Product Weight: 350gProduct Dimensions (WxLxH): 123 x 140 x 58mm

MID49 Baseline 15mm LW (RED V-Raptor Baseplate) SKU: M49-BSL-LW23-AC7 Baseline 15mm LW (RED V-Raptor Baseplate) is a baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens.ARRI dovetail slot on the bottom attaches to the included Baseline ARRI Dovetail or other ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew. Baseline ARRI Dovetail is the included lower ARRI mounting plate which can attach to tripod plates using 1/4-20 or 3/8-16 screws or ARRI standard bridgeplates with centered or offset screw spacing. ARCA dovetail slot on top holds the included ARCA Dovetail and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten. Center screw slot on ARCA Dovetail accepts 1/4-20 and 3/8-16 mounting screws, and a vertical rod hole clamps included 1/4-20 lens support posts for adaptors like Metabones, etc. Rod Bracket (15mm LW) (sold separately) can be attached to the back of the baseplate for rear 15mm LW rod support. Individual components of this kit are also available: Baseline Core 15mm LW (23mm Platform Height)Baseline ARCA Dovetail (7.5mm Height)Baseline ARRI Dovetail Technical data Product Weight: 330gProduct Dimensions (WxLxH): 123 x 140 x 51mm

MID49 Baseline 15mm LW (Sony Burano, FX6, Venice, Venice 2, Rialto, F55, F5 / Blackmagic URSA Mini, Mini Pro, Mini Pro 12K Baseplate)SKU: M49-BSL-LW0-AC12 Baseline 15mm LW (Sony FX6, Venice, Venice 2, Rialto, F55, F5 / Blackmagic URSA Mini, Mini Pro, Mini Pro 12K Baseplate) is a baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens on the listed cameras. ARRI dovetail slot on the bottom attaches to the included Baseline ARRI Dovetail or other ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew. Baseline ARRI Dovetail is the included lower ARRI mounting plate which can attach to tripod plates using 1/4-20 or 3/8-16 screws or ARRI standard bridgeplates with centered or offset screw spacing. ARCA dovetail slot on top holds the included ARCA Dovetail and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten. Center screw slot on ARCA Dovetail accepts 1/4-20 and 3/8-16 mounting screws, and a vertical rod hole clamps included 1/4-20 lens support posts for adaptors like Metabones, etc. Individual components of this kit are also available: Baseline Core 15mm LW (0mm Platform Height)Baseline ARCA Dovetail (12mm Height)Baseline ARRI DovetailTechnical dataProduct Weight: 334gProduct Dimensions (WxLxH): 123 x 140 x 33mm

MID49 Baseline 15mm LW (Sony FS5, Panasonic EVA1, VariCam LT, VariCam 35 Baseplate) SKU: M49-BSL-LW13-AC12 Baseline 15mm LW (Sony FS5, Panasonic EVA1, VariCam LT, VariCam 35 Baseplate) is a baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens on the listed cameras. ARRI dovetail slot on the bottom attaches to the included Baseline ARRI Dovetail or other ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew. Baseline ARRI Dovetail is the included lower ARRI mounting plate which can attach to tripod plates using 1/4-20 or 3/8-16 screws or ARRI standard bridgeplates with centered or offset screw spacing. ARCA dovetail slot on top holds the included ARCA Dovetail and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten. Center screw slot on ARCA Dovetail accepts 1/4-20 and 3/8-16 mounting screws, and a vertical rod hole clamps included 1/4-20 lens support posts for adaptors like Metabones, etc. Rod Bracket (15mm LW)(sold separately) can be attached to the back of the baseplate for rear 15mm LW rod support. Individual components of this kit are also available: Baseline Core 15mm LW (13mm Platform Height)Baseline ARCA Dovetail (12mm Height)Baseline ARRI Dovetail Technical data Product Weight: 346gProduct Dimensions (WxLxH): 123 x 140 x 45mm

MID49 Baseline 15mm LW (Sony FX9, FS7, FS7mkII / Canon C100mkII, C300mkII, C100, C300, C500 Baseplate) SKU: M49-BSL-LW0-AC7 Baseline 15mm LW (Sony FX9, FS7, FS7mkII / Canon C100mkII, C300mkII, C100, C300, C500 Baseplate) is a baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens on the listed cameras. ARRI dovetail slot on the bottom attaches to the included Baseline ARRI Dovetail or other ARRI standard dovetails using a top-load locking mechanism. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew. Baseline ARRI Dovetail is the included lower ARRI mounting plate which can attach to tripod plates using 1/4-20 or 3/8-16 screws or ARRI standard bridgeplates with centered or offset screw spacing. ARCA dovetail slot on top holds the included ARCA Dovetail and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten. Center screw slot on ARCA Dovetail accepts 1/4-20 and 3/8-16 mounting screws, and a vertical rod hole clamps included 1/4-20 lens support posts for adaptors like Metabones, etc. Rod Bracket (15mm LW)(sold separately) can be attached to the back of the baseplate for rear 15mm LW rod support. Individual components of this kit are also available Baseline Core 15mm LW (0mm Platform Height)Baseline ARCA Dovetail (7.5mm Height)Baseline ARRI DovetailTechnical dataProduct Weight: 322gProduct Dimensions (WxLxH): 123 x 140 x 30mm

MID49 Baseline 15mm LW (Upper Cage Canon C50)SKU: M49-BSL-LW-19Baseline 15mm LW (Upper Cage Canon C50) holds two 15mm rods at 15mm lightweight spacing when combined with the Upper Cage Canon C50.ARRI dovetail slot on the bottom attaches using a top-load locking mechanism to included Baseline ARRI Dovetail or other ARRI standard dovetails.Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew.ARCA dovetail slot on top holds Baseline ARCA Dovetails and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten.

MID49 Baseline 15mm LW (Upper Cage Nikon ZR)SKU: M49-BSL-LW19-ZRBaseline 15mm LW (Upper Cage Nikon ZR) holds two 15mm rods at 15mm lightweight spacing when combined with the Upper Cage Nikon ZR. Note that this is the same lens height as the version for the Canon C50, however, this assembly has a shorter thumbscrew and safety button to allow the Nikon battery and memory card to be changed without removing the baseplate. ARRI dovetail slot on the bottom attaches using a top-load locking mechanism to the included Baseline ARRI Dovetail or other ARRI standard dovetails. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged.Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew. ARCA dovetail slot on top holds Baseline ARCA Dovetails and can be top-loaded, or installed from the back by sliding in.When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until the ARCA clamp has opened fully. Reverse the process to tighten.Weight: 156g

MID49 Baseline 15mm LW (Upper Cage Sony FX2)SKU: M49-BSL-LW26-0Baseline 15mm LW (Upper Cage Sony FX2) holds two 15mm rods at 15mm lightweight spacing when combined with the Upper Cage Sony FX2. ARRI dovetail slot on the bottom attaches using a top-load locking mechanism to included Baseline ARRI Dovetail or other ARRI standard dovetails. Loosen the thumbscrew and push the silver button on the operator's side to release the baseplate from the ARRI dovetail. To reattach, drop down and listen for the pop to know it has engaged. Adjust the position on the ARRI dovetail, then lock the ratcheting thumbscrew.ARCA dovetail slot on top holds Baseline ARCA Dovetails and can be top-loaded, or installed from the back by sliding in. When sliding in from the back, a safety pin will engage with a pop when properly installed. Adjust the position, then lock the ratcheting thumbscrew. Top-loading can be achieved by loosening the thumbscrew, pulling out on the ratcheting knob, and turning the thumbscrew until ARCA clamp has opened fully. Reverse the process to tighten.