Vocas Viewfinder bracket RED SKU: 0700-0051 This Vocas Viewfinder bracket RED is designed for DSMC2 RED EVF. This bracket uses a NATO rail system to connect the camera to the viewfinder and prevents the viewfinder from "twisting", which can result in a crooked horizon of the image.
Vocas Viewfinder bracket RED kit SKU: 0700-0050 This viewfinder bracket is designed for RED Raven camera. This bracket uses a NATO rail system to connect the camera to the viewfinder and prevents the viewfinder from "twisting", which can result in a crooked horizon of the image. Included items in this kit 1 x Viewfinder bracket RED1 x NATO rail (0710-1100)
Vocas Viewfinder bracket universal SKU: 0700-0010 This viewfinder bracket is designed for use with any viewfinder with a 1/4" thread on the bottom side. This bracket uses a NATO rail system to connect the camera to the viewfinder and prevents the viewfinder from "twisting", which can result in a crooked horizon of the image.
Vocas Viewfinder bracket with rosette 1/4" SKU: 0700-0030 This Vocas Viewfinder bracket is designed for viewfinders that are equiped with a rosette with 1/4" threaded hole. This bracket uses a NATO rail system to connect the camera to the viewfinder and prevents the viewfinder from "twisting", which can result in a crooked horizon of the image.
Wooden Camera AIR EVF Extension ArmSKU: 259100 AIR EVF Extension Arm (Sony Venice, Venice 2, DVF-EL200 EVF) is an ultra-lightweight extension for the AIR EVF Mount (Sony Venice, Venice 2, DVF-EL200 EVF) and also the Sony viewfinder mount that is included with the EVF. The arm extends from 10.5 inches (26 cm) to 14.5 inches (37 cm) and a friction knuckle allows for quick tilting of the EVF without having to loosen a thumbscrew. Included on the arm is an eyepiece leveller attachment point for adding ARRI or 3rd party EPLs. The tool-less design allows quick installation and removal of the viewfinder. Weight: 202g Dimensions: 266.7 x 38.1 x 63.5 mm
EVF Plate for SONY BURANO SKU: A00586 Open up the mounting options for the Sony BURANO’s EVF by adding the EVF Plate to your build. Designed for the inevitable repositioning of the EVF from its original location, add a Bolt-On Accessory Rail Clamp anywhere on the Top Plate, Ultra Handle System or Side Rails. This plate utilizes multiple Accessory Rails as mounting options, and allows you to adjust the EVF position to suit the needs of the job. Included Items: 4x 60mm Accessory Rails, 3/16” Hex KeyWeight: 124.74 gDimensions: 133 x 16 x 81 mm
EVF System (Sony BURANO)SKU: A00575Utilizing a newly designed Universal 15mm Rod Clamp, the EVF System introduces a modular way of mounting the EVF. Attach the Sony BURANO EVF to the bracket via a 1/4”-20 screw, allowing the 2.5mm threads across the back and sides to be used for accessories like our Accessory Rails. The Universal EVF Accessory Rail Swivel Clamp is fully rotatable and allows the user to determine the optimal location. Push button safeties help keep the EVF secure to the system while offering a quick release function, in case removal is necessary. An additional mounting option is included for users to mount the EVF system using the Accessory Rails to an Accessory Bolt-On Clamp for placement anywhere around the camera for when traditional EVF use is not needed.Weight: 308.90 gDimensions: 125 x 170 x 82 mmIncluded ItemsUniversal 15mm Rod ClampEVF Plate for Sony BURANOUniversal EVF Swivel ArmUniversal EVF Accessory Rail Swivel ClampAccessory Rail Bolt-On Clamp
Wooden Camera Tool-less LCD/EVF Adapter (Weapon/Scarlet-W/Raven) SKU: 233800 Tool-less LCD/EVF Adapter (Weapon/Scarlet-W/Raven) provides 26pin connection on top and bottom for turning the RED 4.7" Touchscreen into a tool-less monitor! It also works great with the DSMC2 RED EVF (OLED) when using RED's integrated mount. You can put the torx wrench away after you install this device. This can also be used as a riser for the LCD to add 15mm of height above the camera top.
Zacuto Axis Mini SKU: Z-M-AEM The Axis Mini is the most adjustable ENG style mount for rosette mounted EVFs, giving you full 360º motion with four adjustment points. Designed to attach to the top of your camera set up, it leaves plenty of room at the lens for focusing and will work with the widest of lenses. It can easily be adjusted with one hand while the rig is on your shoulder. The Axis Mini has extensive articulation for use with a variety of cameras, both shoulder mounted in a Next Generation Recoil or in tripod operating position. It is very small and quick to install and remove. The Zacuto Axis Mini attaches to your rig via a 15mm rod port at the top of a kit positioned perpendicular to your camera lens. Slide the Axis Mini into the 15mm rod port and clamp into place. The Axis Mini attaches to the Gratical HD via a secure 1/4" 20 rosette mount. EVF's with a 1/4" 20 screw mount require the Quad Rail for use with the Axis Mini. Zacuto offers three 15mm rod port options (not included) to attach the Axis Mini: Recoil HandleC100 Axis MountZ-Rail Z-Lock The Axis Mini has three red tension levers that are controlled independently with 360 degree motion. Release all three levers to completely reposition the mount or release just one to make single segment adjustments. You can dial in the exact amount of tension needed at each lever to adjust on the fly. Just grab and move.
Zacuto Axis Mini for Sony FS5 SKU: Z-M-AEMFS5 The Axis Mini for Sony FS5 is the most adjustable ENG style mount for the Sony FS5 Monitor, giving you full 360º motion with four adjustment points. Designed to attach to the FS5 Top Plate, it leaves plenty of room at the lens for focusing and will work with the widest of lenses. It can easily be adjusted with one hand while the rig is on your shoulder. The Axis Mini has extensive articulation for use in a variety of positions, both shoulder mounted in a Next Generation Recoil or in tripod operating position. It is very small and quick to install and remove. The Zacuto Axis Mini for Sony FS5 attaches to your rig via a 15mm rod. Slide the Axis Mini into side facing 15mm rod port and clamp into place. If you don’t have a side facing rod port you can get the FS5 Top Plate . It attaches to the FS5 LCD with the included FS5 to ¼ 20 rosette adapter. Alternately, you can remove the adapter and attach the Axis Mini directly to a Gratical.
Zacuto Sony FX6 Z-Finder MountSKU Z-FRM-FX6The Sony FX6 Z-Finder Mount is used if you already own a Zacuto Z-Finder Pro. This gives you the appropriate mounts to secure your Z-Finder to the FX6 frame and utilize Sony’s mount.If you plan on using this Z-Finder in shoulder mounting configuration, we recommend using Zacuto’s FX6 Handle Mount to mount an Axis Mini, EVF Mount.
Zacuto Sony FX6 Z-Finder Shoulder Mounting KitSKU: Z-SXFKThe Sony FX6 Shoulder Mounting Kit upgrades your Sony FX6 Z-Finder to be able to mount it to your Sony FX6 camera comfortably for shoulder mounted shooting. It includes the Sony FX6 Handle Mount, Axis Micro, ¼”-20 Fluid Rosette Mount and the Rosette adapter for the Sony LCD.