SHAPE Remote Extension Handle with Cable for Sony FX6SKU: FX6RHThe Remote Extension Handle for the Sony FX6 Camera from SHAPE is a variable-length adjustable handle designed to reposition the FX6 remote grip away from the camera while retaining full remote functionality. Compact for both storage and travel, the arm measures just 5.6″ when folded and may be increased to a maximum length of 11″ for use.A length adjustment range of 2″ is also provided to the user for a more customized and comfortable fit. The handle easily mounts to the Sony FX6 camera using an ARRI-style rosette connection and knob screw on one side, and a native Sony grip connection on the other. An included male-to-female LANC extension cable connects the remote grip to the camera’s body, maintaining full functionality after relocation.The coiled male-to-female cable features a LANC 3.5 mm male connector on one end and female on the other. It measures 10″ from end-to-end when coiled, and approximately 20″ when extended. The arm itself features SHAPE’s patented push-button release which allows the joint to be rotated a full 360° to any required angle. SHAPE is well known for its patented push-button system, now used by so many professionals in the industry. The technology was developed to give filmmakers quick and easy adjustments. By simply pressing the button, you are allowed a 360-degree rotation to place the remote extension handle in the best position for your use. Push, adjust, release, and then it’s locked!
Shape Sony FX9 remote extension kit SKU: FX9RH The Sony FX9 remote extension handle from SHAPE offers an adjustable arm extension (2 inches) for the side hand grip provided with the Sony FX9. The extendable arm is equipped with a ratchet key to easily adjust the length of the arm. It is designed with Arri rosettes to mount on the camera or baseplate with standard ARRI rosettes. It also features SHAPE’s patented Push-Button technology for easy angle adjustment and 360-degree rotation. SHAPE is well known for its patented Push-button system, now used by so many professionals in the industry. The technology was developped to give filmmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the remote extension handle in the best position for your use. Push, adjust, release, and then its lock. Key Features Compatible with Sony FX9 Easy to install and adjust Designed with Arri rosettes to mount on the camera or baseplatePush-Button system with 360-degree rotation for several positioning optionsPush, adjust, release, and then its lock Made of CNC machined aluminum
SHAPE Telescopic Black Handle Arri Rosette Cuffs Kit SKU: CUFKIT Not only can you switch between 15 to 19 mm LWS or Studio – you won’t need to remove your accessories to do it. Connect the Arri Rosette Handles to the rod block, clip the rod block onto your rig, and you’re good to go. Case included. Use the screwdriver included in the Cuff Kit to shorten the Telescopic Handles to 3”. When you’re short on space, it makes all the difference. Since our Handles offer 360 degrees of adjustment, you can clip the cuff kit above or below the rods – make it comfortable! 15 mm LWS cuff rod block Arri rosette (CUF15) 15 mm LWS cuff rod block Arri rosetteThe SHAPE Arri rosette 15 mm rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm lightweight rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. 15 mm studio spacing cuff rod block Arri rosette (CUFST) 15 mm studio spacing cuff rod block Arri rosetteThe SHAPE Arri rosette 15 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 15 mm sudio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. 19 mm studio cuff rod block Arri rosette (CUF19) 19 mm studio cuff rod block Arri rosetteThe SHAPE Arri rosette 19 mm studio rod bracket is designed to mount handgrips or other accessories on each side. It fits on 19 mm sudio rods and feature ARRI rosettes on both ends. The ratchet knob and cuff system allow you to easily clip or unclip the block to your rig without ever having to remove accessories in front or behind (matte box, follow focus, lens support, zoom motors). The SHAPE cuff system allows you to quickly install your handles or other accessories in one clamp. By pressing the block below the rods and by locking the cuff with a ratchet knob, the cuff system is super strong, providing you with the most solid system on the market. Telescopic SHAPE black handle Arri rosette (HAND12SHADOW) Telescopic SHAPE black handle Arri rosetteLeft and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry. The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips.
SHAPE Telescopic Handles ARRI RosetteLeft and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry.The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. Key FeaturesLeft and right telescopic handgrips each featuring 4 points of articulation and ARRI rosettesExtends up to 2 inches and rotates throughout 360°Markings on extendable arm to help you remember your preferred settingsPatented Push-button system for fast adjustmentPush, adjust, release and its lockLet you move quickly between known setupsRubber handgrips for stability and precisionMade of CNC machined aluminum for resistance
SHAPE Telescopic Handles ARRI RosetteLeft and right telescopic handgrips with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. Each arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. SHAPE is well known for its patented Push-button handle, now used by so many professionals in the industry.The technology was developped to give filmakers quick and easy adjustment. By simply pressing the button, you are allowed a 360-degree rotation to place the handle in the best position for your use. Push, adjust, release, and then its lock. The Push-button system on the Handle articulating joint provides additional articulation near the rosette, while the second push-button articulation joint allows you to rotate and precisely position the rubber handgrips. Key FeaturesLeft and right telescopic handgrips each featuring 4 points of articulation and ARRI rosettesExtends up to 2 inches and rotates throughout 360°Markings on extendable arm to help you remember your preferred settingsPatented Push-button system for fast adjustmentPush, adjust, release and its lockLet you move quickly between known setupsRubber handgrips for stability and precisionMade of CNC machined aluminum for resistance
SHAPE Telescopic Single Handle ARRI Rosette Left SideSKU: HAND3Left telescopic handgrip with ARRI rosettes that can be attached to cameras or camera support hardware that has standard ARRI rosettes, which allow you to lock your arms in place. The arm features four points of articulation (2 Push-button and 2 ratchet knob) to adjust the arms position. The ratchet knob along the arms allows you to extend the arms up to 2 inches and rotate the handgrips throughout 360°. The one near the rosette gives you more option to position the arm for your comfort. Key FeaturesLeft telescopic handgrips with ARRI rosettesLet you move quickly between known setupsArm features 4 points of articulationArm extend up to 2 inches and rotates throughout 360°Markings on extendable arm help you remember preferred settingsPatented Push-button system for fast adjustmentPush, adjust, release, and then its lockRubber handgrips for stability and precisionMade of CNC machined aluminum for resistance
Vocas FX6 adjustable grip kit SKU: 0255-7410 The Vocas FX6 adjustable grip kit allows the Sony side handgrip of the FX6 camera to be relocated in comfortable position when the camera is used as a shoulder camera. Including 3,5 mm extension cable, 25 cm.
Vocas Handgrip kit with two handgrips SKU: 0390-0002 Vocas Handgrip kit, including 19 mm and 15 mm combi bracket and two handgrips.
Woooden Camera Extension for Elite Handheld AccessoriesThis lightweight Extension is manufactured with 7075 Aluminum featuring a pentagonal design to maintain the structure and strength for high-stress shooting scenarios. Each extension incorporates a 5-degree offset allowing the full kit units to fold down for storage and 32mm rosettes take the industry standard M6 screws to tie in rosette accessories. 1/4”-20 and 3/8”-16 mounting points are added along the center of the extension for attaching accessories like monitors.The Knob on this Extension is made from stainless steel and coated in DLC for added strength with finger grooves for easy tightening. The Knobs have a hole in the center for a 3/16” or 4mm hex tool for extra tightening if needed.Specifications4” Extension: Weight: 129.3g | Dimensions: 134.7 x 31 x 32.6 mm6” Extension: Weight: 156.5 g | Dimensions: 185.5 x 31 x 32.6 mm 8” Extension: Weight: 182.3g | Dimensions: 236.6 x 31 x 32.6 mm
Woooden Camera Extension for Elite Handheld AccessoriesThis lightweight Extension is manufactured with 7075 Aluminum featuring a pentagonal design to maintain the structure and strength for high-stress shooting scenarios. Each extension incorporates a 5-degree offset allowing the full kit units to fold down for storage and 32mm rosettes take the industry standard M6 screws to tie in rosette accessories. 1/4”-20 and 3/8”-16 mounting points are added along the center of the extension for attaching accessories like monitors.The Knob on this Extension is made from stainless steel and coated in DLC for added strength with finger grooves for easy tightening. The Knobs have a hole in the center for a 3/16” or 4mm hex tool for extra tightening if needed.Specifications4” Extension: Weight: 129.3g | Dimensions: 134.7 x 31 x 32.6 mm6” Extension: Weight: 156.5 g | Dimensions: 185.5 x 31 x 32.6 mm 8” Extension: Weight: 182.3g | Dimensions: 236.6 x 31 x 32.6 mm
Woooden Camera Extension for Elite Handheld AccessoriesThis lightweight Extension is manufactured with 7075 Aluminum featuring a pentagonal design to maintain the structure and strength for high-stress shooting scenarios. Each extension incorporates a 5-degree offset allowing the full kit units to fold down for storage and 32mm rosettes take the industry standard M6 screws to tie in rosette accessories. 1/4”-20 and 3/8”-16 mounting points are added along the center of the extension for attaching accessories like monitors.The Knob on this Extension is made from stainless steel and coated in DLC for added strength with finger grooves for easy tightening. The Knobs have a hole in the center for a 3/16” or 4mm hex tool for extra tightening if needed.Specifications4” Extension: Weight: 129.3g | Dimensions: 134.7 x 31 x 32.6 mm6” Extension: Weight: 156.5 g | Dimensions: 185.5 x 31 x 32.6 mm 8” Extension: Weight: 182.3g | Dimensions: 236.6 x 31 x 32.6 mm
Wooden Camera Handgrip Trigger Box SKU: 219500 Wooden Camera Handgrip Trigger Box attaches to the Wooden Handgrip (Right) and Wooden Camera Handgrip (Left) to add start/stop functionality for LANC and ARRI 3 pin Fischer compatible cameras. The Wooden Camera Handgrip Trigger Box works with both the Left and the Right grip. Simply remove the captured M3 screws and insert them from the opposite side. Coiled LANC Cable (12") and Coiled 3pin Fischer Cable (20") included. No power is required for operation. Weight 453.5 gDimensions 101.6 mm x 101.6 mm x 152.4 mm
Wooden Camera Rosette Handgrip (135mm)SKU: A00995This Rosette Handgrip is constructed from a compound TPE material and features a large padded design by ODI, providing all-day comfort and long-lasting durability. This Handgrip has stainless steel knobs that are coated with DLC for resistance to wear and tear. Each knob features finger grooves for easy manual tightening.Additionally, the knob has a hole in the center for a 3/16” or 4mm hex tool for extra tightening if needed. We realize camera operators usually have their own preferences in grips, so each grip can be removed and exchanged for any 3rd party grip that is at least 135mm in length.SpecificationsWeight: 205.5gDimensions: 179.9 x 34 x 43 mm
Wooden Camera Rosette Handle (Brown Leather) SKU: 150800 Brown leather handle with ARRI style rosette and thumbscrew. Can attach to Bolt on Rosette (ARRI), Crossbar, Rosette Arm, or existing ARRI equipment. Attaches directly to AJA CION, Sony FS7, Blackmagic URSA (using Blackmagic's rosette baseplate), ARRI Alexa, and ARRI Amira (using ARRI's Amira baseplate). Includes 1 x M6 nylon spacer Weight 271 gDimensions 184.2 mm x 56 mm x 48.2 mm
Wooden Camera Rosette Handle Rubber SKU: 150900 Rubber grip handle with ARRI style rosette and thumbscrew. Can attach to Bolt on Rosette (ARRI), Crossbar, Rosette Arm, or existing ARRI equipment. Attaches directly to AJA CION, Sony FS7, Blackmagic URSA (using Blackmagic's rosette baseplate), ARRI Alexa, and ARRI Amira (using ARRI's Amira baseplate). Includes 1 x M6 nylon spacer Weight 271 gDimensions 184.2 mm x 56 mm x 48.2 mm
Wooden Camera Rosette Handle Kit (Brown Leather) SKU: 170900 Rosette Handle Kit features independent ratcheting handles utilizing ARRI standard rosettes. Included Rosette Arms put the handgrips in front of your body for easy camera control. Perfect for quick, lightweight shoulder mounted configurations. Threaded holes on Arms and Handles allow for attachment of LCD monitors and other accessories. Wooden Camera Rosette Handle Kit (Brown Leather) Includes 1 x Rosette Bracket2 x Rosette Handle (Brown Leather)2 x Rosette Arm
Wooden Camera Rosette Handle Kit Rubber SKU: 171000 Rosette Handle Kit features independent ratcheting handles utilizing ARRI standard rosettes. Included Rosette Arms put the handgrips in front of your body for easy camera control. Perfect for quick, lightweight shoulder mounted configurations. Threaded holes on Arms and Handles allow for attachment of LCD monitors and other accessories. Includes 1 x Rosette Bracket2 x Rosette Handle (Rubber)2 x Rosette Arm Specifications Weight 1089 gDimensions 152.40 mm x 101.60 mm x 279.40 mm
Wooden Camera Studio Handgrip KitAvailable in three configurations—19mm Studio, 15mm Studio, and 15mm LWS—these rod based handgrip kits are built for strength, comfort, and speed on set. Each kit includes a crossbar, two 6” extensions, a pair of ODI BMX-style handgrips, stainless steel DLC-coated knobs, and eight color rings for camera ID customization.All components are machined from 7075 aluminum, offering exceptional durability for demanding production environments. The crossbar in each version is designed to stay mounted to the rods even when the camera is attached to an ARRI-standard dovetail, allowing seamless transitions between handheld and tripod setups. Both the 19mm and 15mm Studio versions include cut-outs for 15mm LWS compatibility, while all three feature 32mm pivoting rosettes to allow for comfortable handgrip positioning.The 6” extensions use a unique pentagonal design that ensures strength under stress while keeping the build lightweight. A built-in 5-degree offset enables the full rig to fold down for easier storage. Each extension also includes standard ¼”-20 and ⅜”-16 mounting points for attaching accessories like monitors, as well as 32mm rosettes compatible with M6 hardware.The included ODI BMX-style handgrips are made from a compound TPE material and feature a large padded design for all-day comfort and long-term durability. The stainless steel knobs have finger grooves for quick adjustments and center holes for a 3/16” or 4mm hex tool when extra torque is needed. =To help identify camera builds quickly, eight color rings (red, blue, green, and yellow—two of each) are included in every kit.Choose your configuration from19mm Studio Handgrip Kit15mm Studio Handgrip Kit15mm LWS Handgrip KitIncluded Items2 x 6” Extension 2 x Rosette Handgrip (135mm)Crossbar : 19mm Studio / 15mm Studio / 15mm LWSElite Handheld Accessories Color Ring PackSpecifications15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm LWS Handgrip Kit:Weight: 1102g | Dimensions:216.1 x 235 x 42.9 mm
Wooden Camera Studio Handgrip KitAvailable in three configurations—19mm Studio, 15mm Studio, and 15mm LWS—these rod based handgrip kits are built for strength, comfort, and speed on set. Each kit includes a crossbar, two 6” extensions, a pair of ODI BMX-style handgrips, stainless steel DLC-coated knobs, and eight color rings for camera ID customization.All components are machined from 7075 aluminum, offering exceptional durability for demanding production environments. The crossbar in each version is designed to stay mounted to the rods even when the camera is attached to an ARRI-standard dovetail, allowing seamless transitions between handheld and tripod setups. Both the 19mm and 15mm Studio versions include cut-outs for 15mm LWS compatibility, while all three feature 32mm pivoting rosettes to allow for comfortable handgrip positioning.The 6” extensions use a unique pentagonal design that ensures strength under stress while keeping the build lightweight. A built-in 5-degree offset enables the full rig to fold down for easier storage. Each extension also includes standard ¼”-20 and ⅜”-16 mounting points for attaching accessories like monitors, as well as 32mm rosettes compatible with M6 hardware.The included ODI BMX-style handgrips are made from a compound TPE material and feature a large padded design for all-day comfort and long-term durability. The stainless steel knobs have finger grooves for quick adjustments and center holes for a 3/16” or 4mm hex tool when extra torque is needed. =To help identify camera builds quickly, eight color rings (red, blue, green, and yellow—two of each) are included in every kit.Choose your configuration from19mm Studio Handgrip Kit15mm Studio Handgrip Kit15mm LWS Handgrip KitIncluded Items2 x 6” Extension 2 x Rosette Handgrip (135mm)Crossbar : 19mm Studio / 15mm Studio / 15mm LWSElite Handheld Accessories Color Ring PackSpecifications15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm LWS Handgrip Kit:Weight: 1102g | Dimensions:216.1 x 235 x 42.9 mm
Wooden Camera Studio Handgrip KitAvailable in three configurations—19mm Studio, 15mm Studio, and 15mm LWS—these rod based handgrip kits are built for strength, comfort, and speed on set. Each kit includes a crossbar, two 6” extensions, a pair of ODI BMX-style handgrips, stainless steel DLC-coated knobs, and eight color rings for camera ID customization.All components are machined from 7075 aluminum, offering exceptional durability for demanding production environments. The crossbar in each version is designed to stay mounted to the rods even when the camera is attached to an ARRI-standard dovetail, allowing seamless transitions between handheld and tripod setups. Both the 19mm and 15mm Studio versions include cut-outs for 15mm LWS compatibility, while all three feature 32mm pivoting rosettes to allow for comfortable handgrip positioning.The 6” extensions use a unique pentagonal design that ensures strength under stress while keeping the build lightweight. A built-in 5-degree offset enables the full rig to fold down for easier storage. Each extension also includes standard ¼”-20 and ⅜”-16 mounting points for attaching accessories like monitors, as well as 32mm rosettes compatible with M6 hardware.The included ODI BMX-style handgrips are made from a compound TPE material and feature a large padded design for all-day comfort and long-term durability. The stainless steel knobs have finger grooves for quick adjustments and center holes for a 3/16” or 4mm hex tool when extra torque is needed. =To help identify camera builds quickly, eight color rings (red, blue, green, and yellow—two of each) are included in every kit.Choose your configuration from19mm Studio Handgrip Kit15mm Studio Handgrip Kit15mm LWS Handgrip KitIncluded Items2 x 6” Extension 2 x Rosette Handgrip (135mm)Crossbar : 19mm Studio / 15mm Studio / 15mm LWSElite Handheld Accessories Color Ring PackSpecifications15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm Studio Handgrip Kit: Weight: 1089g | Dimensions: 216.1 x 235 x 42.9 mm15mm LWS Handgrip Kit:Weight: 1102g | Dimensions:216.1 x 235 x 42.9 mm
Zacuto Sony FX6 Handle MountSKU: Z-S6HMThe Sony FX6 Handle Mount adapts the proprietary Sony accessory mount into a quick release 15mm rod port. It can rotate and angle up to 45 degrees. This allows you to attach our EVF Mounts (Axis Micro and Mini), and Kameleon EVF or Sony FX6 Z-Finder, loupe for the Sony LCD, and have it in the optimal position for shoulder mounted shooting.