MID49 Mid Kit for FUJIFILM GFX ETERNASKU: M49-KTM-FUJEMid Kit for FUJIFILM GFX ETERNA includesTop Plate (FUJIFILM GFX ETERNA)Attaches to the top of the camera and provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, and M4x20mm ARRI standard threaded holes. Segmented design allows the original ETERNA handle to be installed in the camera's dovetail slot over the Top Plate. When the ETERNA top handle is removed, the smaller section of Top Plate can be added.Baseline 15mm LW (FUJIFILM GFX ETERNA)A baseplate that holds 15mm lightweight rods at the correct distance from the center of the lens and attaches to the bottom of the camera by three 3/8-16 screws. The center of the LW 15mm Bracket has a 1/4-20 vertical support post, which can be used to support lens adapters like Metabones, etc.2x Cage NATO Side Arm (ARRI 3/8-16)Attaches to the sides of the Top Plate and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each end.Top 15mm Rod BracketAttaches to the front of the Top Plate and holds two 15mm LW rods for adding focus motors, viewfinder mounts, and other accessories over the lens area.2x 15mm Rod (6")Stainless steel iris rods.Rainbow Handle (Black)Rainbow Handle has an ARCA Swiss dovetail shape that interfaces with the Top Plate. If additional support is needed for heavy camera builds, or if you want to skip the ARCA clamp, two 3/8-16 screws are included for attaching the Rainbow Handle directly to cheeseplates with 3/8-16 screws spaced up to 76mm apart, center to center. Other colors are available, email info@mid49.com if you prefer a different colored grip.

MID49 Mid Kit for FUJIFILM GFX100 IISKU: M49-KTM-FUJ-G100iiMid Kit for FUJIFILM GFX100 II is an accessory kit that includes:Upper Cage for FUJIFILM GFX100 IIForm fitting cage with 1/4-20, 3/8-16, and M4x20mm threaded holes in several places along with shoe mounts and 15mm rod clamps. ARCA Swiss dovetail slot on top accepts included ARCA Top Handle and Top Plate. Two included 15mm accessory rods provide additional mounting for included AB-6 XLR adapter. Lower ARCA Swiss dovetail attaches to included baseplate and lens support adapter attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Core)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottomBaseline ARRI DovetailBaseline ARRI Dovetail is the lower ARRI mounting plate that interfaces with the Baseline CoreARCA Top HandleSliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsARCA Top Plate (114mm)Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail lengthRod Bracket (15mm LW)Attaches to the Top Handle or Top Plate to provide 15mm LW rod supportAudio Breakout AB-3 (RED® Komodo™, DSMC2™, DSLR, Stereo 3.5mm TRS)Adapts the camera's two mini XLRs to two standard, full-size XLRs2x 15mm 9inch stainless steel rods are included in the Mid kit.

MID49 Mid Kit for Sony FX2SKU: M49-KTM-SON-FX2Mid Kit for Sony FX2 is an accessory kit that includes:Upper Cage for Sony FX2Form-fitting cage with 1/4-20, 3/8-16, and M4x20mm ARRI MAP threaded holes in several places. Swing-away HDMI lock with reduction inserts protects the camera's HDMI port from abuse and ties into the camera's threaded hole on the side to prevent tipping under the force of focus motors.An included handle tie-down for the Sony XLR-H1 audio handle adds stability to the setup, reducing stress on the MI Shoe connection when using heavy lenses. Lower ARCA Swiss dovetail attaches to the included baseplate, and the adjustable lens support adapter with 3 lengths of 1/4-20 support screw attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Upper Cage Sony FX2)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom.Sony FX Handle 15mm Rod ClampAttaches to the two 1/4-20 holes on the top of the Sony XLR-H1 handle and provides a sideways 15mm rod clamp for adding the optional TWIST Mount EVF System, sold separately.2x 15mm Rod (9 inch)Stainless steel iris rods.

MID49 Mid Kit for Blackmagic Cinema Camera 6K SKU: M49-KTM-BMD-P6K Mid Kit for Blackmagic Cinema Camera 6K (Full Frame, Pocket Pro, Pocket G2) is an accessory kit that includes:Upper Cage for Blackmagic Cinema Camera 6K (Full Frame, Pocket Pro, Pocket G2) is a Form fitting cage with 1/4-20, 3/8-16, and M4x20mm threaded holes in several places along with shoe mounts and 15mm rod clamps. ARCA Swiss dovetail slot on top accepts included ARCA Top Handle and Top Plate. Two included 15mm accessory rods provide additional mounting for included AB-6 XLR adapter. Lower ARCA Swiss dovetail attaches to included baseplate and lens support adapter attaches to 3rd party lens adapters like Metabones, etc.Baseline 15mm LW (Core) is a quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottomBaseline ARRI Dovetail is the lower ARRI mounting plate that interfaces with the Baseline CoreARCA Top Handle is a sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsARCA Top Plate (114mm) is a sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail lengthRod Bracket (15mm LW) attaches to the Top Handle or Top Plate to provide 15mm LW rod supportAudio Breakout AB-6 (Blackmagic Pocket 6K Pro, G2) adapts the camera's two mini XLRs to standard, full-size XLRs2x 15mm 9 inch stainless steel rods are included in the Mid Kit.

MID49 Mid Kit for Blackmagic PYXISSKU: M49-KTM-BMD-PYMid Kit for Blackmagic PYXIS is an accessory kit that includes:Top Plate (Blackmagic PYXIS)Provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, M4x20mm ARRI standard threaded holes, and ventilation holes for the PYXIS fan2x Cage NATO Side Arm (ARRI 3/8-16)Attaches to the sides of the Top Plate and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each endARCA Top HandleSliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsBaseline 15mm LW (Blackmagic PYXIS)Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom2x 15mm Rod (9 inch)Stainless steel iris rodsSide Plate (Blackmagic PYXIS)A mounting plate that attaches to the side of the camera and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. =A marked set of 3/8-16 and 1/4-20 holes are on the sensor axis and the plate is the correct thickness to mount the camera vertically on Baseline 15mm LW (Blackmagic PYXIS) and use 15mm rods at the correct lens heightAudio Breakout AB-9 (Blackmagic PYXIS)A passive adapter that converts the camera's front mini XLR and rear 3.5mm TRS plug into two standard, full-size XLRs. Input 1 - balanced audio with phantom power via camera menuInput 2 - unbalanced audio, no phantom power available9.5 inch (24 cm) cable length with custom low profile mini XLR connector and Neutrik 3.5mm TRS.

MID49 Mid Kit for RED KOMODO-XSKU: M49-KTM-RED-KXV Mid Kit for RED KOMODO-X is an accessory kit that includes: ARCA Top Mount (Komodo, Komodo-X, V-Raptor) is a top mount for RED Komodo-X that can attach to the front 1/4-20 or rear M4 screw holes and accepts the included handle and top plate. ARCA Top Handle - Sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mounts. ARCA Top Plate (114mm) - Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail length. Rod Bracket (15mm LW) - Attaches to the Top Handle or Top Plate to provide 15mm LW rod support. Baseline 15mm LW (RED Komodo, Komodo-X / Blackmagic Pocket 4K Baseplate) - Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom. Breakout Side Plate for RED KOMODO and KOMODO-X - Side plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus ideal screw locations for breakout boxes like the included AB-1. Audio Breakout AB-1 (RED Komodo-X) - Adapts camera 00 LEMO connector to two standard full-size XLR's and attaches by a 1/4-20 to the included Side Plate. 2x 15mm 9inch stainless steel rods are included in the Mid kit.

MID49 Mid Kit for RED V-Raptor SKU: M49-KTM-RED-VR Mid Kit for RED V-Raptor is an accessory kit that includes ARCA Top Mount (V-Raptor) is a top mount for RED V-Raptor that can attach to the front 1/4-20 screw holes and accepts the included ARCA handle and top plateARCA Top Handle - Sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsARCA Top Plate (114mm) - Sliding top plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes. 114mm dovetail lengthRod Bracket (15mm LW) attaches to the Top Handle or Top Plate to provide 15mm LW rod supportBaseline 15mm LW (RED V-Raptor) - Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottomBreakout Side Plate for RED V-Raptor - Side plate that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus ideal screw locations for breakout boxes like the included AB-1Audio Breakout AB-1 (RED V-Raptor) adapts camera 00 LEMO connector to two standard full-size XLR's and attaches by a 1/4-20 to the included Side Plate2x 15mm 9inch stainless steel rods are included in the Mid Kit

MID49 Mid Kit for Sony Burano SKU: M49-KTM-SON-BUR Mid Kit for Sony Burano is an accessory kit that includes: Top Plate (Sony Burano) attaches to the top of the camera and provides 1/4-20 and 3/8-16 threaded holes with ARRI accessory pins, M4x20mm ARRI standard threaded holes, and center ARCA clamp interface for holding ARCA Top Handle and Gimbal Mounting PlatesARCA Top Handle is a sliding camera handle that has 1/4-20, 3/8-16 with ARRI locating pins, and M4x20mm threaded holes plus two hot shoe mountsSingle 15mm Rod Clamp (M4 x 20mm) attaches to the ARCA Top Handle and holds Sony's included Burano EVF system. Also great for attaching lens motors in a compact configurationSony Burano EVF Pivot Adaptor allows the Burano LCD panel to switch from monitor configuration to viewfinder configuration without tools. Just grab and twist2x Cage NATO Side Arm (ARRI 3/8-16) attaches to the sides of the Top Plate and provides an ARRI Rosette adjustable NATO accessory rail with safety pins on each end15mm Rod (7", Aluminum) can replace Sony's included Burano sideways 15mm rod to allow further positioning of the EVF Mount and adds additional space for right side accessoriesBaseline 15mm LW (Sony Burano Baseplate) is an Quick-release 15mm LW baseplate with ARCA Swiss camera dovetail interface on top and ARRI standard dovetail interface on the bottom2x 15mm 9inch stainless steel rods are included in the Mid kit

MID49 Upper Cage for Canon C50SKU: M49-CAG-CAN-C50Upper Cage for Canon C50 is a form-fitting cage with 1/4-20, 3/8-16, and M4x20mm ARRI MAP threaded holes in several places. The included HDMI lock with reduction inserts protects the camera's HDMI port from abuse.Left side camera tie-down keeps the C50 from tipping under the force of focus motors. Rear handle tie-down adds stability to the handle-body connection when using heavy lenses.Lower ARCA Swiss dovetail has an adjustable lens support clamp with three included lengths of 1/4-20 support screw that attach to 3rd party lens adapters like Metabones, etc.ARCA Swiss dovetail attaches to the Baseline 15mm Baseplate to provide rods at the correct lens height, which is sold separately.

MID49 Upper Cage for Canon C80SKU: M49-CAG-CAN-C80 Upper Cage for Canon C80 is a form-fitting cage with 1/4-20, 3/8-16 with ARRI accessory pins, and M4x20mm ARRI-spaced threaded holes in several places. In the center channel, a replica of the Canon striped rosette allows the C80's original handle to be attached. The included top accessory rod holds a combination hot shoe, ARRI 3/8-16, M4x20, and the Canon mic hole pattern for attaching the C80's original microphone shock mount.A special 1/4-20 recess at the end of the rod holds the Audio Breakout AB-4 (Canon C70/C80) which is available as an optional add-on, and converts the camera's two mini XLRs to standard, full-size XLRs. HDMI protector clamps cables securely, and front lens support mount attaches to 3rd party lens adapters like Metabones, etc.Top ARCA Swiss dovetail slot accepts products like our ARCA Top Handle or ARCA Top Plate which are sold separately. Lower ARCA Swiss dovetail attaches to our Baseline 15mm Baseplate to provide rods at the correct lens height and is also available separately.Weight: 438gDimensions (WxLxH): 438 x 132x 162mm

MID49 Upper Cage for Nikon ZRSKU: M49-CAG-NIK-ZR Upper Cage for Nikon ZR is a form-fitting cage with 1/4-20, 3/8-16, and M4x20mm ARRI MAP threaded holes in several places. The swing-away HDMI lock protects the camera's micro-HDMI port from abuse while allowing the dust cover to be accessed. The combination battery/CF Express door on the bottom is unobstructed for easy card changes. Lower ARCA Swiss dovetail has an adjustable lens support clamp with three included lengths of 1/4-20 support screw that attach to 3rd party lens adapters like Metabones, etc.Weight: 438g

MID49 Upper Cage for Sony FX2SKU: M49-CAG-SON-FX2Upper Cage for Sony FX2 is a form-fitting cage with 1/4-20, 3/8-16, and M4x20mm ARRI MAP threaded holes in several places. The swing-away HDMI lock with reduction inserts protects the camera's HDMI port from abuse and ties into the camera's threaded hole on the side to prevent tipping under the force of focus motors. An included handle tie-down for the Sony XLR-H1 audio handle adds stability to the setup, reducing stress on the MI Shoe connection when using heavy lenses.Lower ARCA Swiss dovetail has an adjustable lens support clamp with three included lengths of 1/4-20 support screw that attach to 3rd party lens adapters like Metabones, etc.ARCA Swiss dovetail attaches to the optional Baseline 15mm LW (Upper Cage Sony FX2), sold separately, to provide rods at the correct lens height

MID49 Upper Cage for Blackmagic Pocket 6K (Full Frame, Pro, G2)SKU: M49-CAG-BMD-P6K Upper Cage for Blackmagic Pocket 6K (Full Frame, Pro, G2) is a form-fitting cage with 1/4-20, 3/8-16 with ARRI accessory pins, and M4x20mm ARRI-spaced threaded holes in several places. Included 15mm accessory rods provide threaded holes, a shoe mount, and special recess for the Audio Breakout AB-6 (Blackmagic Pocket 6K), which is available as an add-on, and converts the camera's two mini XLRs to two standard, full-size XLRs. HDMI and USB protector clamps cables securely, and front lens support mount attaches to 3rd party lens adapters like Metabones, etc. Top ARCA Swiss dovetail slot accepts products like our ARCA Top Handle or ARCA Top Plate which are sold separately. Lower ARCA Swiss dovetail attaches to our Baseline 15mm Baseplate to provide rods at the correct lens height and is also available separately.

MID49 Upper Cage for Canon C70 SKU: M49-CAG-CAN-C70 Upper Cage for Canon C70 is a form-fitting cage with 1/4-20, 3/8-16 with ARRI accessory pins, and M4x20mm ARRI-spaced threaded holes in several places. Included 15mm accessory rods provide threaded holes, a shoe mount, and special recess for the Audio Breakout AB-4 (Canon C70) which is available as an add-on, and converts the camera's two mini XLRs to standard, full-size XLRs. HDMI protector clamps cables securely, and front lens support mount attaches to 3rd party lens adapters like Metabones, etc. Top ARCA Swiss dovetail slot accepts products like our ARCA Top Handle or ARCA Top Plate which are sold separately. Lower ARCA Swiss dovetail attaches to our Baseline 15mm Baseplate to provide rods at the correct lens height and is also available separately.

MID49 Upper Cage for FUJIFILM GFX100 II SKU: M49-CAG-FUJ-G100ii Upper Cage for FUJIFILM GFX100 II is a form-fitting cage with 1/4-20, 3/8-16 with ARRI accessory pins, and M4x20mm ARRI-spaced threaded holes in several places. Included 15mm accessory rods provide threaded holes, a shoe mount, and special recess for the Audio Breakout AB-3 which is available as an add-on, and converts the camera's two mini XLRs to two standard, full-size XLRs.HDMI and USB protector clamps cables securely, and front lens support mount attaches to 3rd party lens adapters like Metabones, etc.Top ARCA Swiss dovetail slot accepts products like our ARCA Top Handle or ARCA Top Plate which are sold separately.Lower ARCA Swiss dovetail attaches to our Baseline 15mm Baseplate to provide rods at the correct lens height and is also available separately.

SHAPE Blackmagic Cinema Camera 6K/6K Pro/6K G2 Kit with Matte Box, Follow Focus & Top Handle SKU: BM6KIT SHAPE Blackmagic Cinema Camera 6K/6K Pro/6K G2 Kit with Matte Box, Follow Focus & Top Handle includes: SHAPE Cage for Blackmagic Cinema Camera 6K/6K Pro/6K G2 with Top handle & 15mm LWS Rod System. (BM6KROD)SHAPE lightweight single filter tray matte box 4X5.6 (LWAKS)SHAPE kit focus single rod follow focus 15 mm LWs (FA123) Features Cage for Blackmagic Cinema Camera 6K/6K Pro/6K G2Formfitting Aluminum cage with multiple mounting optionsSHAPE kit focus single rod follow focus & 15mm baseplate LWSSingle filter tray 4×5.6’’ Matte BoxHDMI / USB-C protector clamp includedA pair of 10’’ rods 15mm includedARRI Locating Top Handle with cold shoe attachment options includedBottom of cage features Arca-style compatibility for Quick-Release Baseplate/Gimbal installationNATO rail mounting option on left side of cage for optional handleMultiple cold shoe attachment optionsCage extender included for optional camera’s battery packARRI Locating Top Handle with cold shoe attachment options includedARRI rosette attachment optionalOptional SSD bracket mount attachment possibleMultitude of threaded holes to attach accessories (1/4-20 & 3/8-16)Made of CNC Aluminum

SHAPE Cage for Blackmagic Cinema Camera 6K/6K Pro/6K G2 SKU: BM6KC Crafted from durable aluminum, this cage is designed to snugly fit your Blackmagic Cinema Camera 6K, 6K Pro, or 6K G2. Its formfitting design ensures a secure fit while allowing easy access to camera controls. Multiple Mounting Options: The cage provides various mounting points for accessories. Whether you need to attach monitors, microphones, or other gear, you’ll find threaded holes in both 1/4-20 and 3/8-16 sizes. HDMI / USB-C Protector Clamp optional: Offered as an option, this clamp secures your camera’s HDMI and USB-C ports, preventing accidental damage during use. Arca-Style Compatibility: The bottom of the cage features an Arca-style plate, allowing you to quickly attach and detach the camera from a compatible quick-release baseplate or gimbalNATO Rail Mounting Option: On the left side of the cage, you’ll find a NATO rail design. This provides a convenient attachment point for optional handles, grips, or other accessoriesCold Shoe Attachments: Multiple cold shoe mounts allow you to add accessories like lights, microphones, or wireless transmitters directly to the cageCage Extender: Included with the cage, the extender accommodates an optional camera battery pack, ensuring extended shooting timeOptional ARRI Locating Top Handle: If desired, you can attach an ARRI-compatible top handle for easy carrying and maneuveringARRI Rosette Attachment: For additional flexibility, consider adding an ARRI rosette attachment to the cageOptional SSD Bracket Mount: Need extra storage? Attach an SSD bracket to the cage for recording high-resolution footageCNC Aluminum Construction: The cage is precision-machined from CNC aluminum, providing durability without adding unnecessary weight to your camera setupWhether you’re a professional filmmaker or a passionate videographer, this cage offers versatility and protection for your Blackmagic Cinema Camera

SHAPE CAGE FOR BLACKMAGIC CINEMA CAMERA 6K/6K PRO/6K G2 WITH TOP HANDLE SKU: BM6KTH SHAPE Cage for Blackmagic Cinema Camera 6K/6K Pro/6K G2. (BM6KC)SHAPE is introducing the brand new cage for Blackmagic Cinema Camera 6K/6K Pro/6K G2. Formfitting Aluminum Cage: Crafted from durable aluminum, this cage is designed to snugly fit your Blackmagic Cinema Camera 6K, 6K Pro, or 6K G2. Its formfitting design ensures a secure fit while allowing easy access to camera controls. Multiple Mounting Options: The cage provides various mounting points for accessories. SHAPE Arri locating top handle (ALTH)Arri locating top handleThe ARRI-Style Mount Top Handle uses a locking 3/8"-16 thumbscrew with locating pins to attach securely to your camera cage. In addition to one 15 mm rod bracket, this versatile handle sports one locking and two standard cold shoe mounts, and multiple 1/4"-20 and 3/8"-16 threads. For Blackmagic Cinema Camera 6K/6K Pro/6K G2Formfitting Aluminum cage with multiple mounting optionsARRI Locating Top Handle includedHDMI / USB-C protector clamp includedBottom of cage features Arca-style compatibility for Quick-ReleaseBaseplate/Gimbal installationNATO rail mounting option on left side of cage for optional handleMultiple cold shoe attachment optionsCage extender included for optional camera’s battery packARRI rosette attachment optionalOptional SSD bracket mount attachment possible3 Mounting point attachment to prevent the camera from movingMultitude of threaded holes to attach accessories (1/4-20 & 3/8-16)Made of CNC Aluminum

SHAPE Cage for Blackmagic Cinema Camera 6K/6K Pro/6K G2 with Top handle & 15mm LWS Rod System SKU: BM6KROD SHAPE is introducing the brand new cage for Blackmagic Cinema Camera 6K/6K Pro/6K G2, equipped with an ARRI Top handle & 15mm LWS Rod System. This modular, formfitting cage provides robust protection for your camera while allowing for accessory mounting. It wraps around three sides of the camera, leaving the handgrip exposed for easy access. 15mm Rod System Baseplate: Included for additional accessory mounting optionsHDMI / USB-C Protector Clamp: Safeguard your camera’s HDMI and USB-C portsArca-Style Compatibility: The bottom of the cage features Arca-style compatibility, allowing you to attach it to a Quick-Release Baseplate or gimbalNATO Rail: The left side of the cage has a NATO rail for optional handle attachmentCold Shoe Attachments: Three shoe mounts provide flexibility for mounting accessoriesARRI Locating Top Handle: Enhances handling and provides additional cold shoe mounting pointsCage Extender: Included for optional camera battery pack attachmentARRI Rosette Attachment: Optional for further customizationOptional SSD Bracket Mount: Allows for SSD storage attachmentThreaded Holes: Numerous 1/4-20 and 3/8-16 threaded holes for attaching accessoriesMaterial: Made of CNC aluminum for durability and lightweight designThis cage is designed to enhance your shooting experience by providing versatility and protection for your Blackmagic Cinema Camera.

SHAPE Camera Cage for Canon EOS C80SKU: C80CAGEThe SHAPE Cage for Canon C80 is a robust and versatile accessory designed to enhance your camera setup. It includes a Top Plate with a NATO Side Arm, providing ample options for accessory attachment. The ergonomic Side Plate further expands your accessory mounting possibilities, ensuring you have all the tools you need at your fingertips.FeaturesTop Plate with a NATO side arm: Features several 1/4-20 & 3/8-16 ARRI anti-rotating threaded holes on top, in front & on each side for accessory attachmentHDMI lock included on side of the cage to secure your HDMI cableCompatibility with Handles: This top plate is designed to accommodate both SHAPE and Canon factory top handles, offering you the flexibility to choose the handle that best suits your needsNATO Side Arm: The plate allows for the attachment of a NATO Side Arms, further expanding your options for accessory attachment and customizationCNC Aluminum Construction: Made from high-quality CNC aluminum, this baseplate is both lightweight and durable, providing long-lasting performance.

SHAPE Camera Cage for PANASONIC LUMIX GH6 SKU: GH6CAGE Made of CNC-machined aluminum, the cage is specifically designed for the Panasonic Lumix GH6 camera. The camera is mounted to the cage using a 1/4-20 screw. The cage is designed with several 1/4-20 threaded holes and seven 3/8″-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included with the cage. The bottom of the cage has three 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. The aluminum top handle included with the cage offers cold shoe mounting options for additional accessories. A second top handle can be added and attached on the sides of the cage for vertical shoots. Features For Panasonic Lumix GH6 camera.Formfitting cage with multiple mounting options.HDMI protector included.Aluminum top handle with cold shoe attachment options included.A second aluminum top handle can be attached on side of cage for vertical shoots. (optional)Strap hooks can remain attached to the camera while inserted in the cage.

SHAPE Camera Cage for PANASONIC LUMIX GH6 +15mm LWS Rod System SKU: GH6ROD The cage is specifically designed for the Panasonic Lumix GH6 camera. The camera is mounted to the cage using a 1/4-20 screw. The cage is designed with several 1/4-20 threaded holes and seven 3/8″-16 threaded holes with anti-rotating Arri hole patterns. The design of the cage also allows easy access to all control buttons, side outputs, the memory card, the battery compartment, the lens release button and the camera hot shoe for the audio unit system. All doors and locks are fully usable when the camera is in the cage and its intelligent design allows you to operate the camera without having to remove the cable doors. In addition, the strap hooks can remain attached to the camera while being inserted into the cage. A detachable lock system to secure and hold in place your 4K FULL HDMI cable is included with the cage. The bottom of the cage has three 1/4-20 threaded holes to mount a quick release tripod plate to switch from a tripod to a shoulder configuration. The aluminum top handle included with the cage offers cold shoe mounting options for additional accessories. A second top handle can be added and attached on the sides of the cage for vertical shoots.A 15mm LW rod baseplate system is included and attached underneath the cage with four M4 screws. A height adjustable Metabones® bracket is included at the front of the baseplate for additional support. The bottom of the baseplate has three threaded holes to attach quick-release tripod plates. Features For Panasonic Lumix GH6 cameraFormfitting cage with multiple mounting optionsHDMI protector includedAluminum top handle with cold shoe attachment options includedA second aluminum top handle can be attached on side of cage for vertical shoots. (optional)15mm LW Rod Baseplate System1 pair of 10’’ 15mm rods includedStrap hooks can remain attached to the camera while inserted in the cage In the box 1 x Shape Cage for Lumix GH61 x 15mm LW Rod Baseplate System1 x Pair of 10'' 15mm Rods

SHAPE Camera Cage with Top Handle for Canon EOS C80The SHAPE Cage for Canon C80 is a robust and versatile accessory designed to enhance your camera setup. It includes a Top Plate with a NATO Side Arm, providing ample options for accessory attachment. The ergonomic Side Plate further expands your accessory mounting possibilities, ensuring you have all the tools you need at your fingertips.Key FeaturesTop Plate with a NATO side arm: Features several 1/4-20 & 3/8-16 ARRI anti-rotating threaded holes on top, in front & on each side for accessory attachmentHDMI lock included on side of the cage to secure your HDMI cableCompatibility with Handles: This top plate includes a NATO top handle with multiple attachment points and is compatible with Canon's factory top handles, offering you the flexibility to choose the handle that best suits your needsNATO Side Arm: The plate allows for the attachment of a NATO Side Arms, further expanding your options for accessory attachment and customizationCNC Aluminum Construction: Made from high-quality CNC aluminum, this baseplate is both lightweight and durable, providing long-lasting performance

SHAPE Cine Cage for Sony Burano SKU: BURCAGE The cage system is custom-built for the Sony Burano camera. It provides a secure and versatile platform for attaching accessories and enhancing your shooting experience. The cage is meticulously crafted from CNC aluminum. This material ensures durability, lightweight design, and excellent heat dissipation. In summary, this cage system provides a comprehensive solution for enhancing your Sony Burano camera setup, offering flexibility, stability, and compatibility with various accessories. Features Specifically designed cage system for Sony BuranoIncludes dedicated 15mm LWS baseplate for Sony BuranoIncludes a cable connector protector for the viewfinderLeft and right cage sidesTop plate includes front rod bloc (rods not included)Top plate compatible with Sony Burano & FX9 factory top handlesTop plate compatible with LPHT – TPST – CTRLMultiple points of attachment on cage sides and top plate (3/8-16 & 1/4-20 anti-twist threads)ARRI rosette on right side of cage for additional accessoriesDetachable 15mm LWS bottom baseplateMounting threaded holes to secure camera on a tripod plateFront & back ratchet knobs to secure the rodsPair of 12’’ rods includedMade of CNC aluminum