AVMATRIX MSS0811 The 1 RU 8 x 8 3G-SDI Matrix Switcher from AVMATRIX accepts eight channels of input and can drive them to eight separate output feeds. It includes a multi-format technology that detects multiple video format sources of SD/HD/3G-SDI (level A&B) and DVB-ASI signals at the same time and routes the multiple video destinations in 1080, 720, SD, NTSC, and PAL. It is controlled by manual switches on the front of the device and via RJ45 and RS-232 ports for software control as well as a USB Type-A port for keyboard control. Two 12 VDC power adapters are included to provide redundant power. Features Multi-format technology can auto-detect multiple video format sources of SD/HD/3G-SDI (level A & B) and DVB-ASI signals at the same time and route the multiple video destinations in NTSC and PAL SD, 720p, 1080 at any frame rateFull control from the front panelThe current channel status can be viewed visually from the 2.2" LCD screenLock buttonPC control software allows you to connect a computer via Ethernet or via the RS-232 serial portUSB keyboardRedundant power supplyCompact design8 x 3G-SDI Inputs / 8 x 3G-SDI OutputsYUV Color SpaceLevel A and B Signals SupportedDVB-ASI Interface CompatiblePC Software ControlFront-Panel Button ControlsRJ45, RS-232 and USB for Remote ControlSDI Input Auto Detection and EqualizationRedundant Power Design

AVMATRIX MSS1611-S MSS1611-S is the perfect solution for a large broadcast project. The compact SDI routing switcher features 16 inputs and 16 outputs, redundant power connections and an elegant machined metal front panel with 2.2 inch LCD for routing label display. Routing can be performed by direct button selection and the spin knob controller. The 3G-SDI seamless matrix switcher supports standard 3G/HD/SD SDI rates, automatic bypass of non-standard rates between 270Mbit/s and 3Gbit/s. Built-in frame synchronizer support simultaneous input of signal of different resolution frame rates, which can realize seamless switching without black screen. It can conveniently controlled by front panel button, PC software via LAN/RS-422. Video input: 3G-SDINumber of inputs: 16Overhead inputs: 3G-SDIOverhead Outputs: HDMIOverhead Outputs: SDIInternal Recording: YesScaler on inputs: YesFeatures: Multiviewer/ Quadrature

AVMATRIX SE1217 1×HDMI input, 1×HDMI loop out, 1×Analog audio inputSupports stream encode protocol, up to 1080p60hzDual-stream (main stream and sub stream)RTSP, RTP, RTMPS, RTMP, HTTP, UDP, SRT, unicast and multicastVideo and audio streaming or single audio streamingImage and text overlayMirror image & upside-down imageLive stream with no need for connecting a computer

AVMatrix SHARK S6 PLUS AVMatrix Shark S6 Plus is 17.3″ 6-Channel SDI/HDMI Portable Live Switcher: 4×3G-SDI + 2×4K HDMI inputs, multi-view routing, 6×PGM outputs, RTMP streaming, USB-C UVC capture, pro XLR audio, 6×PTZ control, T-bar, chroma/luma key, 3×PIP, macros & tally.The AVMatrix Shark S6 Plus is the ultimate all-in-one portable production powerhouse. Built around a bright 17.3″ 1080p touchscreen, this 6-channel switcher handles up to 4×3G-SDI and 2×4K60 HDMI inputs with full multi-view source routing – freely assign any input to any preview window for total flexibility.Output simultaneously via 2×HDMI PGM, 4×SDI PGM (all independently configurable), plus 1×HDMI multiview. Stream directly via RTMP while recording clean PGM or full ISO to USB drive/SD card. The USB-C port delivers lossless UVC/UAC capture straight to your laptop (OBS, vMix, Zoom, etc.).Advanced vision mixing includes chroma key, luma key, 3× resizable PIP/POP, DSK, logo overlay, and silky-smooth T-bar/Auto/Cut transitions. Professional balanced XLR audio (48V phantom) with embedded, line, and mic inputs plus full mixing and monitoring. Control up to 6 PTZ cameras with speed, presets, white balance, and focus – all from the panel. Record and edit macro scripts for complex sequences, and send tally via GPIO.Lightweight, rugged, and powered by a single 12V supply, the Shark S6 Plus is the perfect flypack solution for live events, houses of worship, education, corporate, and mobile production.Key Features6-Channel Switching – 4×3G-SDI + 2×HDMI 2.0 (4K60) inputsFlexible Multi-View – Freely route any source to any preview windowOutputs – 2×HDMI PGM + 4×SDI PGM (configurable) + 1×HDMI multiview =Streaming & Recording – Built-in RTMP + USB/SD recordingUSB-C UVC Output – Lossless plug-and-play capture to laptopAdvanced Keying – Chroma key, luma key, 3×PIP/POP, DSK, logo overlayPro Audio – 2×XLR balanced (48V phantom), embedded + line inputs, XLR + 3.5mm monitoring6×PTZ Control – VISCA-over-IP / Pelco, presets, speed, WB, focusT-Bar + Macros – Manual transitions + programmable macro scripts Tally – GPIO port for light control

AVMatrix Shark S8X AVMatrix Shark S8X – 8-Channel SDI/HDMI Live Production Switcher: 6×3G-SDI + 2×4K HDMI inputs, flexible multi-view routing, AUX (playback/UVC/NDI), 6×PGM outputs, RTMP/SRT/NDI streaming, USB-C UVC, 8×PTZ control, pro XLR audio, T-bar, chroma key, 3×PIP, macros & tally.The AVMatrix Shark S8X is the ultimate compact 8-channel live production switcher for professional multi-camera workflows. Built around a bright 15.6″ 1080p touchscreen, it handles 6×3G-SDI + 2×4K60 HDMI inputs with full multi-view source routing – assign any source to any preview window instantly.A dedicated AUX input accepts local video playback, UVC webcam, RTSP pull-stream, or optional NDI, making it perfect for remote guests or pre-recorded content. Output simultaneously via 2×HDMI PGM, 4×SDI PGM (all independently configurable), plus HDMI multiview and REF loop-through. Stream via RTMP/SRT/RTSP or optional NDI while recording PGM or ISO to USB drive, SD card, or 2.5″ SATA SSD. USB-C delivers lossless UVC/UAC capture straight to OBS/vMix/Zoom.Vision mixing includes chroma key, luma key, 3× resizable PIP/POP, DSK, logo overlay, and silky T-bar/Auto/Cut transitions. Professional balanced XLR audio (48V phantom) with embedded + line inputs and full mixing. Control up to 8 PTZ cameras (VISCA/IP, Pelco) with speed, presets, WB, and focus. Record and edit complex macro scripts, plus GPIO tally for on-air lights.Rugged aluminum chassis, single 12-19V power, and optional V-mount plate make the Shark S8X the ideal flypack for houses of worship, corporate events, education, esports, and mobile production.Key Features8-Channel Switching – 6×3G-SDI + 2×HDMI 2.0 (4K60) + AUX (playback/UVC/RTSP/NDI)Flexible Multi-View – Freely route any source to any preview windowOutputs – 2×HDMI PGM + 4×SDI PGM + HDMI multiview + REF loop-throughStreaming – RTMP/SRT/RTSP + optional NDIRecording – USB drive / SD card / 2.5″ SATA SSDUSB-C UVC – Lossless plug-and-play capture to laptopAdvanced Keying – Chroma/luma key, 3×PIP/POP, DSK, logo overlayPro Audio – 2×XLR balanced (48V phantom), embedded + line inputs, XLR + 3.5mm monitoring8×PTZ Control – VISCA-over-IP / Pelco, presets, speed, WB, focusT-Bar + Macros – Manual transitions + fully editable macro scriptsTally – GPIO port

AVMatrix Shark S8X-NDIAVMatrix Shark S8X-NDI – 8-Channel SDI/HDMI Live Switcher with Full NDI: 6×3G-SDI + 2×4K HDMI inputs, NDI AUX & streaming, flexible multi-view, 6×PGM outputs, USB-C UVC, 8×PTZ control, pro XLR audio, T-bar, chroma key, 3×PIP, macros & tally.The AVMatrix Shark S8X-NDI is the NDI-enabled version of the flagship 8-channel live production switcher – everything the S8X does, now with full NDI integration. The 15.6″ 1080p touchscreen controls 6×3G-SDI + 2×4K60 HDMI inputs plus a dedicated AUX that accepts NDI sources, local playback, UVC webcam, or RTSP pull-stream. Full NDI streaming output joins RTMP/SRT/RTSP for simultaneous multi-platform delivery.Output simultaneously via 2×HDMI PGM, 4×SDI PGM (independently configurable), HDMI multiview, and REF loop-through. Record PGM or ISO to USB drive, SD card, or 2.5″ SATA SSD while streaming. USB-C delivers lossless UVC/UAC capture to any laptop.Vision mixing features chroma key, luma key, 3× resizable PIP/POP, DSK, logo overlay, and smooth T-bar/Auto/Cut transitions. Professional balanced XLR audio (48V phantom) with embedded + line inputs and full mixing. Control up to 8 PTZ cameras over IP (VISCA/Pelco) with speed, presets, WB, and focus. Record/edit complex macro scripts and send tally via GPIO.Housed in a rugged aluminum chassis with single 12-19V power (V-mount plate optional), the Shark S8X-NDI is the ultimate all-in-one flypack for NDI-based workflows: houses of worship, corporate, education, esports, and high-end mobile production.Key Features8-Channel Switching – 6×3G-SDI + 2×HDMI 2.0 (4K60) + AUX (NDI / playback / UVC / RTSP)Full NDI Integration – NDI input on AUX + NDI streaming output (in addition to RTMP/SRT/RTSP)Flexible Multi-View – Freely route any source to any preview windowOutputs – 2×HDMI PGM + 4×SDI PGM + HDMI multiview + REF loop-throughRecording – USB drive / SD card / 2.5″ SATA SSDUSB-C UVC – Lossless plug-and-play captureAdvanced Keying – Chroma/luma key, 3×PIP/POP, DSK, logo overlayPro Audio – 2×XLR balanced (48V phantom), embedded + line inputs, XLR + 3.5mm monitoring8×PTZ Control – VISCA-over-IP / Pelco, presets, speed, WB, focusT-Bar + Macros – Manual transitions + fully editable macro scriptsTally – GPIO port

AVMatrix TB-P51AVMatrix TB-P51 Capture/Playback USB-C box, a professional-grade docking station designed for demanding video workflows. Featuring dual ultra-speed Thunderbolt ports with up to 40Gbps bandwidth, this unit delivers 5-channel 3G-SDI connectivity supporting resolutions up to 1080p60. The TB-P51 supports lossless capture formats including YUY2 and RGB, while extended connectivity via USB 3.1 Gen2 and DisplayPort 1.4 expands your creative possibilities. With SDK support, daisy-chain capability, and active cooling for 24/7 operation, this is the reliable capture and playback solution your production deserves.Dual ultra-speed port, the highest rate up to 40Gbps, support for daisy-chainingA variety of video input and output interfaces version optional interchangeableSupport YUY2, RGB and other lossless capture formatsExtended computer interface, interface USB3.1 Gen2 10Gbps, DP1.4 interface 4 * 8Gbps (support windows platform DP MST daisy chain display)Through the PD protocol to provide up to support 60W USB Type-C external power supply (optional)Widely compatible with the operating system, SDK support secondary development (vp51 and vp30)Active cooling 7 *Stable operation for 24 hours

AVMATRIX Wireless Multi-Camera Tally Light System Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with 4/6/8 tally lamps. The system can wirelessly communicate from up to 200m away. Multiple interface connections on the tally box—from GPIO and USB Type-C to RS-232 and RS-485—create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal. Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories. Features Support 433Mhz wireless or wired tally connectionUp to 200m wireless connection distance (line-of-sight)The tally box with multiple interfaces including GPIO/USB/RS-485/RS-232GPIO compatible with AVMATRIX and other video switchersCompatible with VMix via USB type-cWireless PTZ camera control via RS-232/RS-485 pass-through Up to 16 tally lamps can be supportedBoth front and rear indicators on the lamps with 4-level adjustable brightnessVisible signal strength and battery status on the tally lampThe Tally lamp can be powered by USB type-c or 18650 Li-ion battery1/4 inch hot shoe for tally lamp installation Tally Box GPIO, USB Type-C, RS-485, and RS-232 interface1-pin antenna inputGPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxesPTZ remote control via RS-232/RS-485 pass-through USB Type-C input compatible with vMix softwareCan support up to 16 tally lamps Tally Lamp PTZ camera connection via RS-485 inputFront and rear indicators with four-level brightness adjustmentSignal strength and battery status indicatorsPowered via USB Type-C input or with separately available 18650 lithium-ion battery1/4"-20 thread for installation of hot shoe

AVMATRIX Wireless Multi-Camera Tally Light System Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with 4/6/8 tally lamps. The system can wirelessly communicate from up to 200m away. Multiple interface connections on the tally box—from GPIO and USB Type-C to RS-232 and RS-485—create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal. Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories. Features Support 433Mhz wireless or wired tally connectionUp to 200m wireless connection distance (line-of-sight)The tally box with multiple interfaces including GPIO/USB/RS-485/RS-232GPIO compatible with AVMATRIX and other video switchersCompatible with VMix via USB type-cWireless PTZ camera control via RS-232/RS-485 pass-through Up to 16 tally lamps can be supportedBoth front and rear indicators on the lamps with 4-level adjustable brightnessVisible signal strength and battery status on the tally lampThe Tally lamp can be powered by USB type-c or 18650 Li-ion battery1/4 inch hot shoe for tally lamp installation Tally Box GPIO, USB Type-C, RS-485, and RS-232 interface1-pin antenna inputGPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxesPTZ remote control via RS-232/RS-485 pass-through USB Type-C input compatible with vMix softwareCan support up to 16 tally lamps Tally Lamp PTZ camera connection via RS-485 inputFront and rear indicators with four-level brightness adjustmentSignal strength and battery status indicatorsPowered via USB Type-C input or with separately available 18650 lithium-ion battery1/4"-20 thread for installation of hot shoe

AVMATRIX Wireless Multi-Camera Tally Light System Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with 4/6/8 tally lamps. The system can wirelessly communicate from up to 200m away. Multiple interface connections on the tally box—from GPIO and USB Type-C to RS-232 and RS-485—create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal. Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories. Features Support 433Mhz wireless or wired tally connectionUp to 200m wireless connection distance (line-of-sight)The tally box with multiple interfaces including GPIO/USB/RS-485/RS-232GPIO compatible with AVMATRIX and other video switchersCompatible with VMix via USB type-cWireless PTZ camera control via RS-232/RS-485 pass-through Up to 16 tally lamps can be supportedBoth front and rear indicators on the lamps with 4-level adjustable brightnessVisible signal strength and battery status on the tally lampThe Tally lamp can be powered by USB type-c or 18650 Li-ion battery1/4 inch hot shoe for tally lamp installation Tally Box GPIO, USB Type-C, RS-485, and RS-232 interface1-pin antenna inputGPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxesPTZ remote control via RS-232/RS-485 pass-through USB Type-C input compatible with vMix softwareCan support up to 16 tally lamps Tally Lamp PTZ camera connection via RS-485 inputFront and rear indicators with four-level brightness adjustmentSignal strength and battery status indicatorsPowered via USB Type-C input or with separately available 18650 lithium-ion battery1/4"-20 thread for installation of hot shoe

BirdDog 4K 12G SDI 12G SDI NDI Encoder/Decoder With support for all resolutions up to 4Kp60, including all HD resolutions, Encoding and Decoding 4K Full NDI® has never been easier. All SDI connectors on the 4K line are 12G SDI, including all four SDI connectors on 4K Quad. All the HDMI connectors are 2.0 for maximum compatibility with your sources and destinations. Industry standard SFP+ connection allows for short, medium, and long range connections over fiber and supports Ethernet protocols from 1GbE to 10GbE. A full Tally system is built right into the 4K Family and it requires zero configuration. Includes a built-in large Tally light for your on-air talent to easily see which camera is live, plus user selectable Tally borders on loop out. All 4K products include a built in cross converter and of the 12G SDI inputs can be looped out the HDMI 2.0 port and any of the HDMI 2.0 inputs can be looped out the 12G SDI. With the optional USB to Ethernet dongle you can control any PTZ camera that supports NDI®, NDI|HX, or Visca over IP. Full NDI® is a variable bit rate codec. In normal circumstances BirdDog recommends allowing around 140Mbps in HD, or 6 streams per 1GbE cable with some headroom. In 4K it is recommended to allow around 300Mbps or 3 streams with some headroom to allow for any unforeseen spikes. With BirdDog’s tools you can select the bit rate to suit your bandwidth and requirements. In both HD you can slide between 80-180Mbps and in 4K you can select the data rate to be anywhere between 60 and 360Mbps. 4K Family include free Audio Intercom software, Comms Lite. Comms Lite supports four BirdDog devices and one Director. Need a more powerful Audio Intercom solution? Comms Pro gives you all the amazing features of Comms Lite plus allows you create you up to five groups, adds additional push to talk buttons for the director, ability to change groups on the fly, plus more. BirdDog Central is a software platform set to redefine the way we think about driving content to TV screens. By teaming up Central with any NDI® source, including all BirdDog hardware capable of creating NDI® sources, you can now drive your NDI® streams to any BirdDog Studio NDI, Mini or 4K Family to decode NDI® back to SDI or HDMI.

BirdDog 4K HDMI HDMI 2.0, 4Kp60 NDI Encoder/Decoder Bi-directional 4K NDI to HDMI scaling converter with HDMI pass through and 12G-SDI out. Encode & Decode up to 4Kp6012G & HDMI 2.0 connectionsSFP+ for 10GbE & long rangeNDI Tally that just worksCross ConverterPTZ ControlAdaptive bit rate. Slide your way to gloryFree Comms Lite. Upgrade to Comms ProDistribute NDI® content everywhere. Just add Central

BirdDog 4K QUAD Four channel 12G SDI to 4Kp60 NDI Encoder/Decoder Following on from the award winning HD NDI® products, the 4K Family has been engineered from the ground up for real-world users. Built around BirdDog’s custom NDI® silicon chip and housed in an aircraft grade aluminium case, features include 12G SDI and HDMI 2.0 inputs and outputs, built-in cross converter, SFP+ port for 10GbE connectivity, active loop outs, audio intercom system, NDI® tally system, PoE, and compatibility with BirdDog’s Comms Pro and Central Pro apps. Features 4K NDI FamilyEncode & Decode up to 4Kp6012G & HDMI 2.0 connectionsBuilt-in cross converterSFP+ port for 10GbE connectivityActive loop outs Three models to choose from 4K HDMI1x HDMI 2.0 Input1x HDMI 2.0 Output1x 12G Output4K 12G SDI1x HDMI 2.0 Output1x 12G SDI Output1x 12G SDI Output4K QUAD1x HDMI 2.0 Output4x 12G SDI Input/Output

BirdDog Flex 4K IN BirdDog Flex 4K IN is 4K Full NDI Encoder with Tally, Comms, PTZ Control, PoE+, and DC Power Output BirdDog’s revolutionary Studio NDI gave the world NDI, Power, Video, Audio, Tally, and Audio Intercom all done a single Ethernet cable. Flex 4K IN take it one step even further and provides an additional 15w power allowing you to use the DC output to power your monitor, recorder, or even your camera. Flex’s revolutionary Halo Tally system is built right into the Flex Family and requires zero configuration when connected with any NDI enabled, software based, production system. The Halo Tally is designed to be seen by the camera operators as well as the on air talent.

BirdDog OG4BirdDog OG4 is the world's first NDI OpenGear card. It offers four independently configurable 12G-SDI ports. Full dashboard support is included as well as an SFP+ port for 10GbE connectivity. It is fully compatible with the fourth generation of the openGear platform, oGx, a modular 2RU rack frame system with an open architecture. BirdDog OG4 provides full support for Dashboard, the freely available OpenGear control software for MacOS, Windows, and Linux. The SFP+ port (industry standard) enables short, medium, and long-range fiber connections and supports Ethernet protocols from 1GbE to 10GbE. The device supports all video formats up to 4Kp60 (including all HD formats). In encoding mode, up to four channels of 4Kp60 can be processed simultaneously, while in decoding mode, a maximum of two channels of 4Kp60 or four channels of 4Kp30 or 1080p60 can be processed simultaneously. Each channel offers independent control of frame rates and resolution. The openGear frames are equipped with integrated fans for optimal cooling of all cards. They can be equipped with two redundant power supplies, enabling very high reliability and long operating times.FeaturesNDI OpenGear card for modular 2RU OpenGear Rack System4x 12G-SDI inputs and outputsFull compression for NDI i-frameDashboard Support: Software for MacOS, Windows, Linux (free/separately available)SFP+ according to industry standard for fiber connectionsEthernet protocols from 1 GbE to 10 GbEEncoding & Decoding support up to 4K60 resolutionFrame rate and resolution of inputs/outputs independently configurableCompatible with 2RU and OG-3-FR openGear framesTechnical dataVideo I/O: 4x 12G SDI Encode Support, 2x 12G-SDI or 4x 1.5/3/6G SDI Decode SupportAudio Input: 2 Channels per SDI portAudio Output: 2 Channels per SDI portVideo Codec: NDI (Full Bandwidth i-Frame Compression), max. 4 Channel UHD 60pFull NDIOpenGear Network Port (integrated in chassis backplane), 1x 1GbpsSFP+ Network Port1x 10Gbps optional module, fiber or copper 10 GbEControl: WebUI on device; Published RESTful API; Q-Sys plugin; Crestron; Zoom; openGear Dashboard Control SystemHealth Monitoring: WebUI on device Dimensions: approx. 33.5 x 7.5 x 2.4 cm (processor card only)Video Formats3840x2160p @ 23.98; 24; 25; 29.97; 30; 50; 59.94; 601920x1080p @ 23.98; 24; 25; 29.97; 30; 50; 59.94; 601920x1080i @ 50; 59.94; 601280x720p @ 50; 59.94; 60

BirdDog PLAY BirdDog PLAY is the newest and smallest 4K NDI Player on the planet with full support for NDI 5. Now connections are a breeze, simply connect PLAY to your NDI network, plug it into your TV via HDMI and use your own remote to browse the new and gorgeous interface. PLAY supports all the new NDI 5 functions including high bandwidth NDI, NDI HX2, NDI Remote, and NDI Bridge. Features 4K NDI Player with full support for NDI 5Can be powered by PoE or USB-CBuilt-in CEC controlAutomatic source detectionDimensions: 85mm x 85mm x 19mmWeight: 97g

Blackmagic 2110 IP Converter 3x3G SKU: CONVNVIPA3/3G The new Blackmagic 2110 IP Converter 3x3G lets you convert 3 separate 3G-SDI devices to 2110 IP video systems. That’s because its 10G Ethernet connection can handle 3 separate video channels at the same time. Plus each channel has independent SDI inputs and SDI outputs, so you could even connect to 6 completely different SDI devices! All 3G-SDI inputs feature loop outputs so you can install the converter in line within existing SDI systems. There's also a reference output, timed to the 2110 PTP clock! Blackmagic 2110 IP Converter 3x3G includes an elegant front panel with a color LCD for monitoring, menus and diagnostics. You can even route IP inputs from the panel!

Blackmagic 2110 IP Converter 4x12G PWRBlackmagic Design has a wide range of SMPTE-2110 IP video products, including converters, video monitors, audio monitors and even cameras! Plus they support Ultra HD using low cost 10G Ethernet! Most converter models are bidirectional, so they're fantastic to use on cameras when you need an extra program return! The rack mount models have an elegant design with a color LCD for monitoring, menus and diagnostics. All models conform to the SMPTE ST-2110 standard for IP video, including PTP clocks and even NMOS support so you can make connections using a video router panel. The Blackmagic 2110 IP Converter 3x3G model even includes a reference video output, timed to the 2110 PTP clock! Blackmagic 2110 IP Converter 4x12G PWR lets you add SMPTE-2110 IP video to 12G-SDI broadcast equipment. It features 4 independent bidirectional 12G-SDI to SMPTE-2110 IP video converters using RJ-45 10G Ethernet connections which can also provide power. Its 1RU design includes a control panel with LCD and supports HD and Ultra HD standards up to 2160p60. ConnectionsTotal SDI Inputs: 5SDI Video Inputs: 4SDI Main Program Inputs: 1Total SDI Outputs: 5SDI Video Outputs: 4SDI Main Program Outputs: 1 Loop OutSDI Rates: 270Mb, 1.5G, 3G, 6G, 12GSMPTE ST-2110 IP Video Inputs: 4 x 10G EthernetSMPTE ST-2110 IP Video Outputs: 4 x 10G EthernetAnalog Audio Outputs: 1 x 6.35 mm headphone socketSDI Audio Inputs: 16 Ch embedded audio on SDI inputSDI Audio Outputs: 16 Ch embedded audio on SDI loop outputSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetMulti Rate Support: Auto detection of SD, HD, Ultra HD and 4KReclocking: YesEthernet: 4 x 10Gb/s RJ‑45 PoE++ connectors supporting 10/100/1000/10G BASE-T for SMPTE 2110 IP video in and out. PoE++ is power output only for powering connected PoE devices such as Blackmagic Cameras and Converters, 1 x 1Gb/s RJ‑45 connector supporting 10/100/1000 BASE-T for configuration and firmware updatesComputer Interface: 1 x USB-C 3.0 for configuration and firmware updates

Blackmagic 2110 IP Converter 8x12G SFPBlackmagic 2110 IP Converter 8x12G SFP lets you add SMPTE-2110 UP video to 12G-SDI broadcast equipment. It features 8 independent bidirectional 12G-SDI to SMPTE-2110 IP video converters using SFP modules for compatibility with optical fiber Ethernet modules for long distances. Its 1RU design includes and control panel with LCD and support HD and Ultra HD standards up to 2160p60. Total SDI Inputs: 9SDI Video Inputs: 8SDI Main Program Inputs: 1Total SDI Outputs: 9SDI Video Outputs: 8SDI Main Program Outputs: 1 Loop OutSDI Rates: 270Mb, 1.5G, 3G, 6G, 12GSMPTE ST-2110 IP Video Inputs/Outputs: 8 x 10G EthernetAnalog Audio Outputs: 1 x 6.35 mm headphone socketSDI Audio Inputs: 16 Ch embedded audio on SDI inputSDI Audio Outputs: 16 Ch embedded audio on SDI loop outputSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetAnalog Audio Outputs: 1 x 6.35 mm headphone socketMulti Rate Support: Auto detection of SD, HD, Ultra HD and 4KReclocking: YesEthernet: 8 x 10Gb/s SFP sockets supporting up to 10G BASE-T for SMPTE 2110 IP video in and out. 1 x 1Gb/s RJ‑45 connector supporting 10/100/1000 BASE-T for configuration and firmware updatesComputer Interface: 1 x USB-C 3.0 for configuration and firmware updatesSD Video Standards: 525i59.94 NTSC, 625i50 PALHD Video Standards: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p47.95, 1080p48, 1080p50, 1080p59.94, 1080p60, 1080PsF25, 1080PsF29.97, 1080PsF30Ultra HD Video Standards: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p47.95, 2160p48, 2160p50, 2160p59.94, 2160p604K Video Standards: 4Kp23.98 DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI and 4Kp60 DCISDI Video Rates: SDI video connections are switchable between standard definition, 720p, 1080i, 1080p, 2K DCI, Ultra HD and 4K DCISDI Color Precision: 4:2:2SDI Color Space: YUVSDI Auto Switching: Automatically detects SD, HD, 2K DCI, Ultra HD and 4K DCI. Level A and B is automatically detected on 3G-SDI input and user selectable on 3G‑SDI outputSMPTE 2110-20 (Uncompressed Video): IGMP v2SMPTE 2110-21 (Traffic Shaping): Sender: Narrow / Receiver: Narrow, Wide Synchronous, AsynchronousSMPTE 2110-30 (PCM): Audio Conformance level: Level CSMPTE 2110-40 (Ancillary Data): Full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadataCodec: Blackmagic IP10 codec used when converting 12G-SDI rates to 10G 2110 IP videoPrecision Time Protocol: IEEE 1588-2008 (PTP v2) / ST 2059-1 / ST 2059-2NMOS IS-04 Discovery and Registration: v1.3.2 / Peer-to-peer via mDNS/DNS‑SD =NMOS IS-05 Connection Management: v1.1.2NMOS BCP-002-01: Natural GroupingNMOS BCP-004-01: Receiver capabilitiesAudio: Front panel audio monitor speaker with speaker control button, plus 6.35 mm headphone socketBuilt in Control Panel: 12 button control panel, 2.2 inch color display and spin knob for setup and menu settingsOperating Systems: Mac 13.0 Ventura, Mac 14.0 Sonoma or later, Windows 10 and 11Power Supply: 2 x Internal 100 - 240V AC 50/60Hz with IEC C14 mains inputPower Usage: TBAPhysical Installation: 1 rack unitTemperature: 5° to 40°Storage Temperature: -20° to 45° CRelative Humidity: 0% to 90% non‑condensing

Blackmagic 2110 IP Mini BiDirect 12GSKU: ONVNVIPF/IP/12GBlackmagic 2110 IP Mini BiDirect 12G lets you convert broadcast cameras with SDI connections to SMPTE-2110 IP video systems. Its 12G-SDI connection supports SD, HD and Ultra HD standards up to 2160p60 and even handles the SDI program return. Blackmagic 2110 IP Mini BiDirect 12G also has a 5 pin XLR talkback headset connection with talkback volume control and a press to talk button. It connects and powers from 10G Ethernet or the included DC power supply. SDI Video Inputs: 1SDI Video Outputs: 1SDI Rates: 270Mb, 1.5G, 3G, 6G, 12GSMPTE ST-2110 IP Video Inputs/Outputs: 1 x 10G EthernetAnalog Audio Inputs: 1 x 5 pin XLR TalkbackAnalog Audio Outputs: 1 x 5 pin XLR TalkbackSDI Audio Inputs: 16 Ch embedded audio on SDI inputSDI Audio Outputs: 16 Ch embedded audio on SDI loop outputSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetSMPTE ST 2110 IP Audio Outputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetMulti Rate Support: Auto detection of SD, HD, 2K, Ultra HD and 4KReclocking: YesEthernet: 1 x 10Gb/s RJ‑45 connector supporting 10/100/1000/10G BASE-T for SMPTE-2110 IP video in and out, configuration and firmware updatesComputer Interface: 2 x USB-C 3.1 Gen 1 (up to 5 Gb/s) for configuration and firmware updatesSD Video Standards: 525i59.94 NTSC, 625i50 PALHD Video Standards: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p47.95, 1080p48, 1080p50, 1080p59.94, 1080p60, 1080PsF25, 1080PsF29.97, 1080PsF302K Video Standards: 2Kp23.98 DCI, 2Kp24 DCI, 2Kp25 DCI, 2Kp29.97 DCI, 2Kp30 DCI, 2Kp47.95 DCI, 2Kp48 DCI, 2Kp50 DCI, 2Kp59.94 DCI, 2Kp60 DCI, 2KPsF25 DCI, 2KPsF29.97 DCI, 2KPsF30 DCIUltra HD Video Standards: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p47.95, 2160p48, 2160p50, 2160p59.94, 2160p604K Video Standards: 4Kp23.98 DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI and 4Kp60 DCISDI Video Rates: SDI video connections are switchable between standard definition, 720p, 1080i, 1080p, 2K DCI, Ultra HD and 4K DCISDI Color Precision: 4:2:2SDI Color Space: YUVSDI Auto Switching: Automatically detects SD, HD, 2K DCI, Ultra HD and 4K DCI. Level A and B is automatically detected on 3G‑SDI input and user selectable on 3G‑SDI outputSMPTE 2110-20 (Uncompressed Video): IGMP v2SMPTE 2110-21 (Traffic Shaping): Sender: Narrow / Receiver: Narrow, Wide Synchronous, vocas.nl AsynchronousSMPTE 2110-30 (PCM): Audio Conformance level: Level CSMPTE 2110-40 (Ancillary Data): Full access to entire SMPTE ancillary data stream. Includes RP 188/SMPTE 12M-2, closed captioning and HDR static metadataCodec: Blackmagic IP10 codec used when converting 12G-SDI rates to 10G 2110 IP videoPrecision Time Protocol: IEEE 1588-2008 (PTP v2), ST 2059-1, ST 2059-2NMOS IS-04 Discovery and Registration: v1.3.2, Peer-to-peer via mDNS/DNS‑SDNMOS IS-05 Connection Management: v1.1.2NMOS BCP-002-01: Natural GroupingNMOS BCP-004-01: Receiver capabilitiesLED Indicators: 1 x IP Input Lock LED indicator light, 1 x SDI Input Lock LED indicator light, 1 x Tally LED indicator lightControl: Talkback button controls for Volume Up, Volume Down and Push to TalkTalkback: 5‑pin XLR talkback headset connection for talkback on channels 15/16 in the SDI and 2110 IP videoLive Tally Indicator: Tally LED indicator lightOperating Systems: Mac 13.0 Ventura, Mac 14.0 Sonoma or later, Windows 10 and 11Power Supply: 1 x +12V DC external universal power supply with locking 5.5mm barrel Jack plus international socket adapters for most countries / 1 x RJ45 Ethernet connector for power from PoE++ power suppliesOperational Voltage Range: 12 - 16 VPower Usage: 18WOperating Temperature: 5° to 40° CStorage Temperature: -20° to 45° CRelative Humidity: 0% to 90% non‑condensing

Blackmagic 2110 IP Mini BiDirect 12G SFP SKU: CONVNVIPF/IP/12GSFP Blackmagic Design has a wide range of SMPTE-2110 IP video products, including converters, video monitors, audio monitors and even cameras. Plus they support Ultra HD using low cost 10G Ethernet. Most converter models are bidirectional, so they're fantastic to use on cameras when customers need an extra program return. The rack mount models have an elegant design with a color LCD for monitoring, menus and diagnostics. All models conform to the SMPTE ST-2110 standard for IP video, including PTP clocks and even NMOS support so customers can make connections using a video router panel. Blackmagic 2110 IP Mini BiDirect 12G SFP lets you convert broadcast cameras with SDI connections to SMPTE-2110 IP video systems over long distances using optical fiber. Its 12G-SDI connection supports SD, HD and Ultra HD standards up to 2160p60 and even handles the SDI program return. Blackmagic 2110 IP Mini BiDirect 12G SFP also has a 5 pin XLR talkback headset connection with talkback volume control and a press to talk button. The SFP socket will accept 10G Ethernet, 3G-SDI, 6G-SDI or 12G-SDI optical modules. It also includes a 12 DC power supply. 2110 IP Converters FeaturesAll converters conform to the SMPTE-2110 IP video standardChoose between Mini Converter or rack mount modelsUses readily available 10G Ethernet for low cost installationRe-syncs SDI inputs to a common PTP clockIncludes NMOS Protocol for building a virtual routerLow latency, open standard Blackmagic IP10 codecSupports all SD, HD and Ultra HD formats up to 2160p60

Blackmagic 2110 IP Mini IP to HDMISKU: CONVNVIPE/IP/HDMIBlackmagic 2110 IP Mini IP to HDMI lets you monitor 2110 IP video and audio on any HDMI monitor or TV. Its compact design means it can be placed behind displays, while it connects and powers from 10G Ethernet and supports HD and Ultra HD standards to 2160p60. Also includes DC power supply. SDI Video StandardsHDMI SD Video Standards: 525i59.94 NTSC, 625i50 PALHDMI HD Video Standards: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p47.95, 1080p48, 1080p50, 1080p59.94, 1080p60HDMI Ultra HD Video Standards: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p47.95, 2160p48, 2160p50, 2160p59.94, 2160p60HDMI 4K Video Standards: 4Kp23.98 DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI and 4Kp60 DCIHDMI Color Precision: 4:2:2HDMI Color Space: YUV

Blackmagic 2110 IP Mini IP to HDMI SFPBlackmagic 2110 IP Mini IP to HDMI SFP lets you monitor 2110 IP video and audio on any HDMI monitor or TV over long distances. Its compact design means it can be placed behind displays, while it connects to a standard SFP socket that supports a 10G optical fiber Ethernet module, so you connect it over long distances. Blackmagic 2110 UP Mini IP to HDMI SFP also supports 3G, 6G and 12G optical fiber SDI modules for regular SDI video compatibility. Powers from the included 12V DC power supply. ConnectionsHDMI Video Outputs: 1HDMI Audio Outputs: 8 Ch embedded audio on SDI loop outputSMPTE ST-2110 IP Video Inputs: 1 x 10G EthernetSMPTE ST 2110 IP Audio Inputs: 16 Ch embedded audio on ST-2110 IP video via 10G EthernetEthernet: 1 x 10Gb/s SFP optical fibre sockets supporting up to 10/100/1000/10G BASE-T for SMPTE-2110 IP video in, configuration and firmware updatesComputer Interface: 1 x USB-C 3.0 for configuration and firmware updates. Video StandardsHDMI Ultra HD Video Standards: 2160p23.98, 2160p24, 2160p25, 2160p29.97, 2160p30, 2160p47.95, 2160p48, 2160p50, 2160p59.94, 2160p60HDMI 4K Video Standards: 4Kp23.98 DCI, 4Kp24 DCI, 4Kp25 DCI, 4Kp29.97 DCI, 4Kp30 DCI, 4Kp47.95 DCI, 4Kp48 DCI, 4Kp50 DCI, 4Kp59.94 DCI and 4Kp60 DCISMPTE Compliance: SMPTE ST2110‑20, SMPTE ST2110‑21, SMPTE ST2110‑30, SMPTE ST2110‑40HDMI Color Precision: 4:2:2HDMI Color Space: YUVHDMI HD Video Standards720p50, 720p59.94, 720p601080i50, 1080i59.94, 1080i601080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p47.95, 1080p48, 1080p50, 1080p59.94, 1080p60

Blackmagic 2110 IP Presentation Converter Blackmagic 2110 IP Presentation Converter is designed for speaker podiums with connections for laptops, projectors and microphones all in the one converter. Computers can connect via USB-C for both video and power and there is an HDMI output for projectors that can be switched to the video input or the 2110 IP return feed. For audio, there are XLR microphone inputs and an XLR audio out for PA speakers. The RJ-45 10G Ethernet video connection can power the whole converter, even when charging a USB computer! 2110 IP Converters FeaturesAll converters conform to the SMPTE-2110 IP video standardChoose between Mini Converter or rack mount modelsUses readily available 10G Ethernet for low cost installationRe-syncs SDI inputs to a common PTP clockIncludes NMOS Protocol for building a virtual routerLow latency, open standard Blackmagic IP10 codecSupports all SD, HD and Ultra HD formats up to 2160p60 ConnectionsPC Video Inputs: 1 x front USB‑C plus 1 x rear USB‑C with 45W host charging capabilityHDMI 2.0 Video Inputs: 1HDMI 2.0 Video Outputs: 1SDI Video Outputs: 1, Automatically standards converted to destinationSDI Rates: 270Mb, 1.5G, 3G, 6G, 12GSMPTE ST-2110 IP Video Inputs: 1 x 10G EthernetSMPTE ST-2110 IP Video Outputs: 1 x 10G EthernetAnalog Audio Inputs: 2 x Combination 3-pin XLR / TRS 1/4 inch Jack connectors, switchable between +24dB line and mic level with support for +48V phantom powerAnalog Audio Outputs: 2 channels of professional balanced analog audio with 3-pin XLR connectors, 1 x 6.35 mm headphone jackSDI Audio Outputs: 16 Channels embedded in SD/HD/2K/UHD/4KHDMI Audio Inputs: 8 Channels embedded in SD/HD/UHD/4KHDMI Audio Outputs: 8 Channels embedded in SD/HD/UHD/4KUSB: 2 x USB‑C 3.1 Gen 1 (up to 5 Gb/s)Ethernet: 1 x 10Gb/s RJ‑45 connector supporting 10/100/1000/10G BASE-T for SMPTE-2110 IP video in and out, configuration and firmware updates