Kiloview N5/N6 Full-Functional NDI ConverterKiloview N5/N6 is a bi-directional NDI converter that supports 3G-SDI/HDMI input (encoder) and loop output(decoder). With the support of both NDI high bandwidth and NDI HX2/3, N5/N6 is capable of processing all NDI sources from any camera, software or device. Featured with powerful functions such as PoE, LCD display with big-sized tally, PTZ control, 3.5mm audio line in/out, multi-channel audio encoding, intercom and centralized management, N5/N6 is the easiest and most cost-effective way to get access to the fabulous NDI world for low latency and high image quality.N5: 3G-SDI I/ON6: 1080P HDMI I/O Kiloview N5/N6 supports encoding/decoding of NDI High Bandwidth and NDI HX 2/3. Both NDI encoding and decoding can work within this compact device. Switch the working mode on the UI to the mode you want, and it can easily accommodate all of your workflows.In encoding mode, N5/N6 can encode 3G-SDI/HDMI signal into an NDI High Bandwidth/NDI HX 2/3 video streamIn decoding mode, N5/N6 will automatically adapt the NDI High Bandwidth/NDI HX 2/3 and output through 3G-SDI/HDMI. N5/N6 is equipped with a 1.14-inch LCD screen with touch buttons for a better user experience. With the built-in LCD screen, you can easily check the connectivity, IP address, CPU, memory, resolution, temperature, and tally status in real-time. Kiloview N5/N6 supports PTZ control through USB to serial RS232/485/422. It also supports PTZ control over IP with different protocols, no extra cable required. N5/N6 technical dataVideo Input: N5: 1*3G-SDI; N6: 1*HDMIVideo Output: N5: 1*3G-SDI ( Loop-out ); N6: 1*HDMI ( Loop-out )Audio Ports: 1*3.5mm Line I/ONetwork Connections: 1*RJ45 1000Mbps Ethernet port (with PoE)Video resolution: Encoding&Decoding: Up to 1080p60NDI Codec FeaturesNDI Highbandwidth: YCbCr 4:2:2 8bit 125Mbps in 1080p60NDI|HX: YCbCr 4:2:0 8bit 80Mbps in 1080p60USB Webcam Input: YesTally: YesPower Supply: PoE/DC/D-tapPTZ Control: YesDHCP: YesManagement: WebUI/KiloLink ServerPower Consumption: 6wOperating Temperature: -20~45℃Storage Temperature: -20~70℃Size: 100mm*80mm*24 mmWeight: 272g

Kiloview N50 Kiloview N50 is a full-functional NDI converter that uses the leading FPGA technologies, advanced-level AVC/HEVC algorithm, and NDI algorithm. It supports encoding/decoding within one unit which meets all your demands regarding IP-based video transmission. N50 supports 12G-SDI format encoding/decoding of both NDI High-bandwidth and NDI|HX2/3 by H.264/H.265. Encoding & Decoding with Ultra-low Latency In the encoding mode, the N50 easily converts a 4K 12G-SDI video signal into an NDI and NDI|HX stream. While in decoding mode, it will automatically adapt the NDI and NDI|HX format as your end needs. N50 handles your NDI transmission easily with low latency of less than 80ms. Pro-level Color Performance N50 supports a professional YCbCr 4:2:2 color space and a 10-bit color depth (the common 8-bit color depth is also available). N50 provides higher color and image quality to match the high standard in the broadcast and medical industries. PTZ Control N50 supports PTZ control through USB to serial RS-232/RS-485/RS-422. It also adopts network control protocols (such as Sony Visca/PELCO-D/PELCO-P) for external PTZ control. TF Storage N50 offers a TF storage extension that eases your recording of encoding NDI video directly into a TF card (local recording supports MOV. format). TF storage prevents your recording process from losing video frames caused by network delay, network interruption, or fluctuation. 

Kiloview N5/N6 Full-Functional NDI ConverterKiloview N5/N6 is a bi-directional NDI converter that supports 3G-SDI/HDMI input (encoder) and loop output(decoder). With the support of both NDI high bandwidth and NDI HX2/3, N5/N6 is capable of processing all NDI sources from any camera, software or device. Featured with powerful functions such as PoE, LCD display with big-sized tally, PTZ control, 3.5mm audio line in/out, multi-channel audio encoding, intercom and centralized management, N5/N6 is the easiest and most cost-effective way to get access to the fabulous NDI world for low latency and high image quality.N5: 3G-SDI I/ON6: 1080P HDMI I/O Kiloview N5/N6 supports encoding/decoding of NDI High Bandwidth and NDI HX 2/3. Both NDI encoding and decoding can work within this compact device. Switch the working mode on the UI to the mode you want, and it can easily accommodate all of your workflows.In encoding mode, N5/N6 can encode 3G-SDI/HDMI signal into an NDI High Bandwidth/NDI HX 2/3 video streamIn decoding mode, N5/N6 will automatically adapt the NDI High Bandwidth/NDI HX 2/3 and output through 3G-SDI/HDMI. N5/N6 is equipped with a 1.14-inch LCD screen with touch buttons for a better user experience. With the built-in LCD screen, you can easily check the connectivity, IP address, CPU, memory, resolution, temperature, and tally status in real-time. Kiloview N5/N6 supports PTZ control through USB to serial RS232/485/422. It also supports PTZ control over IP with different protocols, no extra cable required. N5/N6 technical dataVideo Input: N5: 1*3G-SDI; N6: 1*HDMIVideo Output: N5: 1*3G-SDI ( Loop-out ); N6: 1*HDMI ( Loop-out )Audio Ports: 1*3.5mm Line I/ONetwork Connections: 1*RJ45 1000Mbps Ethernet port (with PoE)Video resolution: Encoding&Decoding: Up to 1080p60NDI Codec FeaturesNDI Highbandwidth: YCbCr 4:2:2 8bit 125Mbps in 1080p60NDI|HX: YCbCr 4:2:0 8bit 80Mbps in 1080p60USB Webcam Input: YesTally: YesPower Supply: PoE/DC/D-tapPTZ Control: YesDHCP: YesManagement: WebUI/KiloLink ServerPower Consumption: 6wOperating Temperature: -20~45℃Storage Temperature: -20~70℃Size: 100mm*80mm*24 mmWeight: 272g

Kiloview N60 Kiloview N60 is a brand-new full-function NDI converter. Adopting the leading FPGA technologies, advanced-level AVC/HEVC algorithm, and NDI algorithm, Kiloview N60 supports 4Kp60 format encoding/decoding with both NDI High-bandwidth and NDI|HX, meeting all your demands and applications of IP-based video transmission. Kiloview N60 supports encoding/decoding of NDI as well as NDI|HX by H.264/H.265. In the encoding mode, Kiloview N60 can encode a 4K HDMI signal into an NDI and NDI|HX video stream. In the decoding mode, Kiloview N60 will automatically adapt the NDI and NDI|HX format as your end needs.  Kiloview N60 will take care of your 4Kp60 video transmission.  Better color performance: Up to YCbCr 4:2:2 and 10bits color depth The N60 supports a professional YCbCr 4:2:2 color space and a 10-bit color depth (the common 8-bit color depth is also available). N60 promises higher color and image quality, particularly to fulfill the needs in the broadcasting and medical imaging industries that bear no color fringing. Audio and Intercom Kiloview N60 supports an extended USB audio interface (e.g., USB headset), to let you have end-to-end real-time intercom among the Kiloview devices operators and the associated Kiloview Intercom System (KIS) group. PTZ Control Kiloview N60 supports PTZ control through USB to serial RS-232/RS-485/RS-422. N60 also adopts Network control protocols (such as Sony Visca/PELCO-D/PELCO-P) for external PTZ control.

Kiloview P3 4G Module4G module for use with the Kiloview P3 5G Bonding Video Encoder

Kiloview P3 5G Module5G module for use with the Kiloview P3 5G Bonding Video Encoder

Kiloview P34G or 5G Modules are not included and must be addedTo use the Kiloview P3, you need the Kilolink Server Pro. You can find the free software and installation guide for the Kilolink Server at www.Kiloview.com. Kiloview P3 is a new generation of 5G bonding video encoder based on KiloLink, supporting multi connections bonding: 4-channel 5G cellular network, WIFI and Ethernet. P3 is equipped with dual video inputs of 3G-SDI and HDMI with resolution up to 4Kp30 through its HDMI input and up to 1080p60 through its SDI input. Upgraded H.265 encoding capability and perfectly adaption to KiloLink Server ensure the best quality of multi-protocol live streaming and video transmission. With P3’s modular design, end users can flexibly pick the 5G/4G/WiFi modems to adapt the most challenging field scenarios. P3 supports up to 6 connections bonding to maximize the video transmission capacity: 4-channel 5G cellular, WiFi and Ethernet. Each 5G modem can also be replaced by 4G modem or WIFI modem to achieve the bonding of up to 10 IP Connections. Besides, P3 can support Wi-Fi hot-spot for data and file transmission over 4G.P3 supports H.265 and H.264 encoding. H.265 (HEVC) encoding can achieve a lower encoding rate, saving over 50% bandwidth comparing with H.264 under the same conditions. It also supports HDMI input up to 4Kp30Hz and 3G-SDI input up to 1080p60. Technical data Streaming Protocols: NDI | HX, RTMP, SRT, RTSP, HLSDisplay: 4.3 inch touch screen (resolution: 480x800Video Inputs: 1 x HDMI / 1 x 3G-SDIAudio Input: 1*3.5mm Line InUSB Interface: 1 x USB Type 2.0Ethernet Port: 1 x RJ45 adaptive 1000Mbps Ethernet portWIFI: 1 x WIFI (2.4G/5G dual-band, IEEE 802.11a /b/g/n/ac)5G/4G Modems: 4 x 5G/4G modems (support for worldwide use)CPU: ARM Cortex A7 Quad-core @1.2GHzStorage: 1 x eMMC（8GB)Memory: 2 x 1GB（DDR4）External Storage: SD storage card (maximum capacity 2TB)Cooling: Built-in fanTally: YesIntercom: YesPortability: Backpack/DesktopPower Supply: DC 12V/2ABattery Life: Dual battery module (Capacity of each battery 5600mAh@7.2V 43.2W. Total of two batteries: 80.6W))Power Consumption: 20wOperating Temperature: -20℃-45℃Storage Temperature: -40℃-50℃Dimension: 216.8*143*68mmVideo ResolutionsUp to 4kp30: 1920x1080p/1920x1080i 23.98/24/25/29.97/30/47.95/48/50/59.94/601280x720p 25/29.97/30/50/59.94/60720x576 25p/50i (PAL SD)720x480 29.97p/59.94i (NTSC SD)

Kiloview P3 MiniThe P3 mini 4G Wireless Bonding Encoder is the perfect outdoor live streaming device built on patented KiloLink bonding transmission technology, serving also as the upgraded version of P1/ P2. The Kiloview P3 mini features professional-grade antenna isolation design, allowing for the effective bonding and connection of multiple channels (supporting 3*4G cellular network + 1WiFi + 1*RJ45 Ethernet port), boasting exceptional anti-interference capability and stable transmission performance. It is equipped with dual input interfaces for 3G-SDI and HDMI, supporting up to 1080P60 video resolution. Additionally, the P3 mini is equipped with a 5000mAh battery with 4-hours continuous operation and supports PD fast charging, fully meeting versatile application scenarios.The P3 mini is equipped with KiloLink’s patented multi-link bonding transmission technology, which utilizes encryption algorithms to achieve functions such as bandwidth overlay, load balancing, and dynamic bitrate auto-adjustment. This ensures seamless bonding of five networks (3*4G cellular network + WiFi + Ethernet), enabling uninterrupted live streaming experiences. Users can flexibly choose between private, local, or cloudbased deployment of bonding servers to ensure efficient and stable audiovisual transmission. And most importantly, the use of KiloLink is free of charge.Technical data Video Encoding: H.265/H.264Resolution: up to 1080P60Video Input: 1*1080P60 HDMI+1*3G-SDIRecording/Storage: USB expansionAudio Port: 1*3.5mm Line in or SDI/HDMI embeddedBonding Performance: 3CH 4G cellular network, WIFI (2.4G/5G dual band), USB expanded EthernetNetwork: 4G / WiFi / EthernetProtocols: NDI HX/ SRT/ RTMP/ RTSP/RTP/HLS/ TS-UDP (with KiloLink Server)PTZ: USBDisplay: 3" LCD touchscreenBattery: 5000mAh@7.2V 36WVoice Intercom: SupportDimension : 138 x 85 x 35mmPower Consumption: 16WPower Supply: DC 12V/3A PD Fast ChargingManagement: Web/KiloLink ServerWorking Temperature: -15℃~45℃

Kiloview P3 Replaceable Battery Replaceable 3500 mAh @ 7.2 V / 25.2 W battery for the Kiloview P3 5G Bonding Video Encoder

Kiloview Link Deck SeriesThe Kiloview LinkDeck Series consists of four unique design decks including Panel Deck, Take Deck, Zoom deck and the PTZ Deck, and can control all aspects of Kiloview hardware and software based on RTC technology. LinkDeck enables users to manage the whole Kiloview ecosystem including NDI ONAIR / NDI CORE*/ NDI RECORDER* / NDI Encoder / NDI Decoder / Multiview / KiloLink Server*.By developing a 3rd-party plug-in based on Python, Linkdeck even allows interaction with systems like TriCaster and vMix.LinkDeck is an IP-based solution that delivers safe and stable transmission. All the control and management for the system is controlled by one PoE cable.Kiloview LinkDeck consists of four unique design decks including Panel Deck, Take Deck, Zoom deck and the PTZ Deck. Each deck can be combined to your own specification to create an exclusive workbench with fully customised content. This unique design also offers easy assembly and installation for an optimised user experience.Panel DeckPanel Deck is made of robust aircraft-grade materials and designed for bringing the studio experience to you, wherever you are with its own whole set of pro-level joystick/buttons/switches/selectors and ports.The Panel Deck, equipped with a 10.1” touch screen and a bi-color LED keyboard, provides the easy operation and an intuitive user experience. The 10.1” screen allows you to customize whatever product you want to control. Both soft keys and physical keys control all aspects of your workflow, with DC and PoE providing the power source to your entire suite of Decks.TAKE DeckTake Deck helps you to switch like a pro with a “T” stick and dual LED displays. 12 buttons are available to control Switching / FTB / Recording / Live streaming / Lock screen with one single press, making every step of the process easy to operate.PTZ DeckThe PTZ Deck offers single handed control of all your PTZ cameras, with the simple movement of the joystick and switches to adjust focus, aperture and white balance.ZOOM DeckWith Zoom Deck’s rocker, you can simply zoom in / out whenever you want. It also has 11 soft buttons for all your personal customization. Technical dataPanel Deck DP-01Display: 10.1" multi touch LCD screenResolution: 1920 x 1200Keyboard: 24 keys（Bi-color tally)CPU: 8-core CPUMemory: 2GBStorage: 16GBVideo Output: 1 x HDMIInternet: 1GbE port with PoEPower Supply: DC5.5/2.5 12VOutput Resolutions: Up to 1080P60Key: 24, user-defined keysUSB Port: 7×Type-C 2.0DC Port: Single DC5.5/2.1Weight: 3,01kgDimension: 285.33*260.00*110.10mmOperating Temperature: -20°C~45°CPTZ Deck DQ-01USB: 2 * USB Type -C 2.0Key: 1Control Knob: 3Joystick: 1Tally: 3（2 in white，1 in RGB based on settings)Dimension: 260.00*130.00*107.45mmWeight: 1,49 kgZoom Deck DZ-01Keys: 13ZOOM Rocker: 1USB: 2 * Type-C 2.0Dimension: 260.00*130.00*53.68mmWeight: 1,38 kgTake Deck DT-01USB: 2 * Type-C 2.0Keys: 13T Stick: 1Dimension: 260.00*130.00*74.00mmWeight: 1,46 kg

Kiloview Link Deck SeriesThe Kiloview LinkDeck Series consists of four unique design decks including Panel Deck, Take Deck, Zoom deck and the PTZ Deck, and can control all aspects of Kiloview hardware and software based on RTC technology. LinkDeck enables users to manage the whole Kiloview ecosystem including NDI ONAIR / NDI CORE*/ NDI RECORDER* / NDI Encoder / NDI Decoder / Multiview / KiloLink Server*.By developing a 3rd-party plug-in based on Python, Linkdeck even allows interaction with systems like TriCaster and vMix.LinkDeck is an IP-based solution that delivers safe and stable transmission. All the control and management for the system is controlled by one PoE cable.Kiloview LinkDeck consists of four unique design decks including Panel Deck, Take Deck, Zoom deck and the PTZ Deck. Each deck can be combined to your own specification to create an exclusive workbench with fully customised content. This unique design also offers easy assembly and installation for an optimised user experience.Panel DeckPanel Deck is made of robust aircraft-grade materials and designed for bringing the studio experience to you, wherever you are with its own whole set of pro-level joystick/buttons/switches/selectors and ports.The Panel Deck, equipped with a 10.1” touch screen and a bi-color LED keyboard, provides the easy operation and an intuitive user experience. The 10.1” screen allows you to customize whatever product you want to control. Both soft keys and physical keys control all aspects of your workflow, with DC and PoE providing the power source to your entire suite of Decks.TAKE DeckTake Deck helps you to switch like a pro with a “T” stick and dual LED displays. 12 buttons are available to control Switching / FTB / Recording / Live streaming / Lock screen with one single press, making every step of the process easy to operate.PTZ DeckThe PTZ Deck offers single handed control of all your PTZ cameras, with the simple movement of the joystick and switches to adjust focus, aperture and white balance.ZOOM DeckWith Zoom Deck’s rocker, you can simply zoom in / out whenever you want. It also has 11 soft buttons for all your personal customization. Technical dataPanel Deck DP-01Display: 10.1" multi touch LCD screenResolution: 1920 x 1200Keyboard: 24 keys（Bi-color tally)CPU: 8-core CPUMemory: 2GBStorage: 16GBVideo Output: 1 x HDMIInternet: 1GbE port with PoEPower Supply: DC5.5/2.5 12VOutput Resolutions: Up to 1080P60Key: 24, user-defined keysUSB Port: 7×Type-C 2.0DC Port: Single DC5.5/2.1Weight: 3,01kgDimension: 285.33*260.00*110.10mmOperating Temperature: -20°C~45°CPTZ Deck DQ-01USB: 2 * USB Type -C 2.0Key: 1Control Knob: 3Joystick: 1Tally: 3（2 in white，1 in RGB based on settings)Dimension: 260.00*130.00*107.45mmWeight: 1,49 kgZoom Deck DZ-01Keys: 13ZOOM Rocker: 1USB: 2 * Type-C 2.0Dimension: 260.00*130.00*53.68mmWeight: 1,38 kgTake Deck DT-01USB: 2 * Type-C 2.0Keys: 13T Stick: 1Dimension: 260.00*130.00*74.00mmWeight: 1,46 kg

Kiloview RD-260 NDI|HX, SRT, RTSP, RTMP, HLS to SDI and HDMI decoding cardKiloview H.265/H.264 Decoding Cards support 4K HDMI and 3G-SDI decoding capabilities. RD-260 is a four-channel HD Decoding Card, Rackmount card version of D260. Technical dataImage/Text Overlay: SupportProtocols Supported: NDI HB/NDI HX/NDI HX3.0/SRT/RTMP/RTMPS/ HLS/TS over UDP/RTP/ RTSP with more to comeVideo Decoding Format: H.264(AVC/ H.265(HEVC) / SpeedHQ(NDI High-bandwidth)Audio Decoding Format: AAC/MPEG-4/MPEG2/G.711/Opus/LPCMAudio Output: SDI/HDMI Embedded, or 3.5mm Line outUSB: 1*USB Type-CIntercom: SupportManagement: WebUI/Kiloview KiloLink ServiceDimension/Weight: 32*132*19.2mm/200gVideo: 1*HDMI 2.0, supports up to 3840x2160@60Hz (4Kp60), backward compatible / 1*3G-SDI, supports up to 1920x1080@60Hz (1080p60), backward compatibleNetwork: 2*100M/1000M RJ-45Video Decoding: Dual 3G-SDI and HDMI outputs, capable of delivering the same or different content simultaneouslyDecoding Capacity: Up to 4 channels decoding (4*1080P60, 3*4KP30 and 2*4KP60Layout Customizable: 1/2/3/4 screen layouts, with adjustable screen position and size

Kiloview RD-350 4K NDI/SRT/RTSP/HLS to SDI/HDMI decoder/multiviewerKiloview H.265/H.264 Decoding Cards support 4K HDMI and 3G-SDI decoding capabilities. RD-350 is a nine-channel 4K Decoding Card, Rackmount card version of D350. Technical dataVideo Outout: 1*HDMI 2.0, supports up to 3840x2160@60Hz (4Kp60), backward compatible / 1*3G-SDI, supports up to 1920x1080@60Hz (1080p60), backward compatibleNetwork: 2*100M/1000M RJ-45Video Decoding: Dual 3G-SDI and HDMI outputs, capable of delivering the same or different content simultaneouslyDecoding capacity: Up to 12 channels decoding (12*1080P60, 3*4KP30 and 2*4KP60)Layout: Customizable 1~16 screen layouts, with adjustable screen position and sizeImage/Text Overlay: SupportProtocols Supported: NDI HB/NDI HX/NDI HX3.0/SRT/RTMP/RTMPS/ HLS/TS over UDP/RTP/ RTSP with more to comeVideo Decoding Format: H.264(AVC) / H.265(HEVC) / SpeedHQ(NDI High-bandwidth)Audio Decoding Format: AAC/MPEG-4/MPEG2/G.711/Opus/LPCMAudio Output: SDI/HDMI Embedded, or 3.5mm Line outUSB: 1*USB Type-CIntercom: SupportManagement: WebUI/Kiloview KiloLink ServiceDimension/Weight: 32*132*19.2mm/200g

Kiloview RE-3 Dual-channel 4K Rackmount Encoding CardKiloview RE-3 is the latest version of our Cradle series rackmount encoding card, bringing advanced encoding performance including 4K and dual video input support. With RE-3, you can encode 4K video at up to 30 fps or HD video at up to 60 fps, delivering exceptional quality for any production. The dual-channel video inputs offer unmatched flexibility, allowing for multiple encoding options.Equipped with HEVC technology, RE-3 supports live streaming to up to 4 destinations simultaneously. This makes it a powerful and cost-effective solution for live production, streaming, remote transmission, and post-production across a range of industries.Technical dataInput: 1*3G-SDI / 1*4K HDMIApplicable frame: RU01, RU03, RU03SAnalog audio port: 1*3.5mmNDI|HX: NDI|HX2/NDI|HX3Protocols: NDI|HX2/NDI|HX3/SRT/RTMP/RTMPS/HLS/TS over UDP/RTP/RTSP Onvif (Extensible for SIP/GB-T2818)Video codec: H.265(HEVC)/H.264(AVC)Resolution: HDMI: up to 4Kp30 / 3G-SDI: up to 1080p60Network: 1*10/100M/1000M RJ45 Ethernet PortAudio encoding: AAC/G.711Image and text overlay: User-defined text and image overlayVideo rotation and cropping: SupportManagement Portal: Web UI and remote management with KILOVIEW KiloLink Server

Kiloview REN-100 Dual HD 3G-SDI Wired NDI Video Encoder CardDual HD 3G-SDI Wired NDI Video Encoder Card with two SDI input ports and two SDI loop ports.Protocols: SRT/RTP/RTMP/ RTMPS/HLS/TS over UDP/RTSP /Onvif / NDI HXVideo Encoding: H264/AVC, Motion-JPEGResolution: Up to 1080P60HzNetwork: 1*100M RJ45 EthernetRecording: NAS StorageOnly suitable for RU-03S Frame

Kiloview RF02Cradle Series RF02, the flagship rack-mounted media platform from Kiloview, is your ultimate media management center. Within its 2RU high-density structure, the RF02 supports flexible configuration of up to 18 card modules, enabling encoding, decoding, media gateway, bonding, etc. Its modular design replaces the clutter of multiple standalone devices with a streamlined, unified solution, providing the most complete and lightweight AV-over-IP solutions for broadcast-grade production, medical imaging transmission, remote education, live event streaming, and more.High-Speed ConnectivityThe RF02 provides three 10Gbps SFP+ fiber Ethernet interfaces and one 10Gbps RJ45 Ethernet interface, ensuring effortless handling of high-bandwidth NDI streams.Integrated Network SwitchEquipped with a built-in 1G/2.5G network switch module that interconnects all module cards, RF02 supports a full range of capabilities including encoding, decoding, NDI conversion, media gateway, bonding, etc.Efficient Data FlowRF02 streamlines the data flow within the platform, eliminating the need for external network switches. This setup not only reduces setup complexity and costs but also enhances the reliability of data transfer.Unified ControlRF02 is powered by an ARM64 main controller running a customized version of Kiloview’s KiloLink Server Pro, purpose-built for this platform. It enables automatic discovery, monitoring, and configuration of all module cards through a unified interface.On-Premise Bonding ServiceWith media gateway card FMG-400, RF02 can serve as an on-premise server for Kiloview’s P Series 4G/5G wireless bonding encoders, providing secure and reliable remote device and bonding management. Paired with a decoding card, it can seamlessly output remote video streams to SDI or HDMI at various resolutions.Streamlined OperationsThe platform automatically identifies and manages all workflow streams, allowing users to monitor status, assign sources, and configure settings with ease—greatly reducing manual effort while ensuring stable, low-latency transmission.Technical dataMain Controller ModuleProcessor: 8-core ARM64 high-performance processor (Cortex) A73@1.8GHzMemory: 12GB DDR4Storage: 128GB EMMCOperating System /Software: Linux 5.10/KiloLink Server Pro RF versionManagement and Control: Web/ HTTP APINetwork Switch ModuleService Cards Connection: 18 x 1Gbps/2.5Gbps Adaptive Ethernet (Slot1/2 can support up to 10Gbps)External Connection: 3 x 10Gbps SFP+ Optical Ports (IEEE 802.3ae) 1 x 10Gbps RJ45 Ethernet portType: Three-layer managment switch/VLAN supportSwitching Capacity: 120GbpsOverall ChassisDisplay: 3-inch LCD color display (non-touchable)Buttons: 4 (Power/Flip left/Flip right/Select)External Connection: 3 x 10Gbps SFP+ Optical Ports / 1 x 10Gbps RJ45 Ethernet portHeat dissipation: Self-Adjust heat dissipation/ Auto-temp controlPower supply: Dual hot-swappable modular power supplies with redundant backup (configurable to single power mode)Single module specifications: AC 100-240V, 7A(Max), 60/50Hz, 500W MaxDimension:s 483mm x 487mm x 88 mm (2RU)Working Temperature: -10°C to 50°C

Kiloview RMG-300 V2 4K NDI-HX/SRT/RTSP/HLS to SDI/HDMI decoder/multiviewerKiloview Media Gateway Card support dual-channel 4K resolution. RMG-300 V2 is a dual-channel 4K HDMI&3G-SDI Media Gateway Card, Rackmount card version of MG300 V2. Technical dataNetwork: 2*100M/1000M RJ45 adaptive EthernetsDecoding output: 1*SD/HD/3G-SDI, up to 1080P 60Hz / 1*HDMI, up to 3840*2160@60HzApplicable frame: RU01, RU03, RU03SAnalog audio output: 1*3.5mm Line outAnalog audio input: 1*3.5mm Line inUSB: 1*USB 3.0 Type-CAccess protocol: NDI-HX/SRT/RTSP/RTMP/TS-UDP/HTTP, (NDI|HX means NDI|HX Version 2.0, SIP/ONVIF (customize)Output protocol: NDI|HX 2.0/SRT/RTSP/RTMP/TS-UDPProtocol conversion: 9 channels1080P video conversionStreaming distribution: 50 channels of RTSP, 36 channels of RTMP/SRT (Not more than 800Mbps)Streaming distribution capability: 9 channels*4 channel 1080PNumber of decoding: 4K 30Hz H.264/H.265: up to 4 simultaneous channels / 1080P 50Hz/60Hz H.264/H.265: up to 8 simultaneous channels / 1080P 30, 1080i 50/60Hz, 720P and below H.264/H.265：up to 9 channels simultaneouslyVideo decoding standard: H.264, H.265SDI output format: 1080P60/59.94/50,1080P30/29.97/25/24/23.98,1080i60/59.94/50.720P60/ 59.94/50, 576i50, 480i60HDMI output format: 4K 3840x2160@60/30, 1080p60/50, 1080p24/25/30, 1080i60/50, 720p60/50 / Compatible with VESA standard formatVideo rate range: 128Kbps ~ 40MbpsAudio decoding: AAC G.711 (aLaw/uLaw)Audio rate range: AAC: 8Kbps ~ 320Kbps G.711: 64KbpsDecoding delay: ≤200msSplit display style: Support 1/2/3/4/5/6/7/8/9 splitting / Support re-encoding the splitted and recombined video for live streaming/ transmission. The image supports up to 1080P60 H.264 encodingManagement interface: WebRemote management: SupportRemote firmware upgrade: SupportOperating temperature: -25 ~ 60°CDimension & weight: 140*105*28mmPower consumption: ≤6WPower supply: 12V/1A

Kiloview RN-3 3G SDI Full NDI Encodeing/DecodingKiloview NDI I/O Cards support 4K HDMI and 3G-SDI encoding and decoding capabilities. RN-3 is a 3G-SDI NDI I/O Card, rackmount card version of N3.Technical dataInput: 1*3G-SDIOutput: 1*3G-SDIApplicable frame: RU01, RU03, RU03SAnalog audio port: 1*3.5mmProtocols: NDI High BandwidthVideo codec: NDI High BandwidthResolution: Up to 1080p60 (backward compatible with SD/HD/VESA)Network: 1*RJ45 1000Mbps Ethernet portAudio encoding: AAC/G.711Image and text overlay:: User-defined text and image overlayVideo rotation and cropping SupportManagement Portal: Web UI and remote management with KILOVIEW KiloLink Server

Kiloview RN-40 4Kp60 HDMI Full NDI Encodeing/DecodingKiloview NDI I/O Cards support 4K HDMI and 3G-SDI encoding and decoding capabilities. RN-40 is an 4K HDMI NDI I/O Card, rackmount card version of N40.Technical dataInput: 1*HDMIOutput: 1*HDMIApplicable frame: RU01, RU03, RU03SAnalog audio port: 1*3.5mmProtocols: NDI High BandwidthVideo codec: NDI High BandwidthResolution: Up to UHD 4K60 (backward compatible with SD/HD/VESA)Network: 1*RJ45 1000Mbps Ethernet portAudio encoding: AAC/G.711Image and text overlay: User-defined text and image overlayVideo rotation and cropping: SupportManagement Portal: Web UI and remote management with KILOVIEW KiloLink Server

Kiloview RN01 1RU Frame for NDI Encoders/Decoders N3,N4,N30,N40,N6The NDI RN01 frame is simple in structure and flexible in configuration. It can integrate 4 NDI High Bandwidth video encoder/decoder devices in one frame to combine various models. It’s portable and convenient when there is a number of units in your workflow.Freely Mixing with 4 Encoding and Decoding Modules in One ChassisExquisite Design and Modular DesignEasy to Use and InstallTechnical dataCompatible Devices: N3/N4/N30/N40/N5/N6Weight: 0.5kgSize: 483x150x44mmAccessories: Thumb Screw x4

Kiloview RN03 3RU Frame for NDI Encoders/Decoders N3,N4,N30,N40,N6The NDI RN03 installation frame is exquisite and flexible in configuration. It integrates with 10 NDI High Bandwidth video encoder/decoder devices mixing with different models such as N3, N30, N4 and N40. Up to 10 NDI High Bandwidth Video encoder/decoder in a ChassisIntegrated Modular Design, Easy Installation and DurablePowerful Cooling FanMixed Match of Kiloview N Series DevicesTechnical dataCompatible Devices: N3/N4/N30/N40/N5/N6Weight: 1.8kgSize: 483x94.3x133.5mmAccessories: thumb screw x10

Kiloview Storage StickKiloview Storage Stick is a high-capacity industrial-grade Solid State Drive encased in a protective shell to ensure stability, reliability and durability in a consistent working environment. Each Kiloview SSD has run its stress testing along with CUBE R1 to keep it stable and outstanding. The Kiloview testing team is the most critical component for delivering this reliable service in high-pressure professional scenarios.Now you have two choices of capacities1TB 2TB Storage Stick AdvantagesFaster Write SpeedKiloview Storage Stick offers faster write speed than consumer-grade SSD once the cache is fullMore Stable WritesDuring our test, there was nearly no write speed slowing compared to customer-grade SSDHigher TBWCompared to customer-grade SSD, higher TBW enables Kiloview SSD to work longer for your workflowWider Range of Operating TemperatureWider temperature ranges enable Kiloview Storage Stick to operate more reliably even in extremely cold or hot operating scenariosProtective ShellKiloview Storage Stick is protected in a solid metal shell, designed to endure rough operating environments and accidental drops

Kiloview Link Deck SeriesThe Kiloview LinkDeck Series consists of four unique design decks including Panel Deck, Take Deck, Zoom deck and the PTZ Deck, and can control all aspects of Kiloview hardware and software based on RTC technology. LinkDeck enables users to manage the whole Kiloview ecosystem including NDI ONAIR / NDI CORE*/ NDI RECORDER* / NDI Encoder / NDI Decoder / Multiview / KiloLink Server*.By developing a 3rd-party plug-in based on Python, Linkdeck even allows interaction with systems like TriCaster and vMix.LinkDeck is an IP-based solution that delivers safe and stable transmission. All the control and management for the system is controlled by one PoE cable.Kiloview LinkDeck consists of four unique design decks including Panel Deck, Take Deck, Zoom deck and the PTZ Deck. Each deck can be combined to your own specification to create an exclusive workbench with fully customised content. This unique design also offers easy assembly and installation for an optimised user experience.Panel DeckPanel Deck is made of robust aircraft-grade materials and designed for bringing the studio experience to you, wherever you are with its own whole set of pro-level joystick/buttons/switches/selectors and ports.The Panel Deck, equipped with a 10.1” touch screen and a bi-color LED keyboard, provides the easy operation and an intuitive user experience. The 10.1” screen allows you to customize whatever product you want to control. Both soft keys and physical keys control all aspects of your workflow, with DC and PoE providing the power source to your entire suite of Decks.TAKE DeckTake Deck helps you to switch like a pro with a “T” stick and dual LED displays. 12 buttons are available to control Switching / FTB / Recording / Live streaming / Lock screen with one single press, making every step of the process easy to operate.PTZ DeckThe PTZ Deck offers single handed control of all your PTZ cameras, with the simple movement of the joystick and switches to adjust focus, aperture and white balance.ZOOM DeckWith Zoom Deck’s rocker, you can simply zoom in / out whenever you want. It also has 11 soft buttons for all your personal customization. Technical dataPanel Deck DP-01Display: 10.1" multi touch LCD screenResolution: 1920 x 1200Keyboard: 24 keys（Bi-color tally)CPU: 8-core CPUMemory: 2GBStorage: 16GBVideo Output: 1 x HDMIInternet: 1GbE port with PoEPower Supply: DC5.5/2.5 12VOutput Resolutions: Up to 1080P60Key: 24, user-defined keysUSB Port: 7×Type-C 2.0DC Port: Single DC5.5/2.1Weight: 3,01kgDimension: 285.33*260.00*110.10mmOperating Temperature: -20°C~45°CPTZ Deck DQ-01USB: 2 * USB Type -C 2.0Key: 1Control Knob: 3Joystick: 1Tally: 3（2 in white，1 in RGB based on settings)Dimension: 260.00*130.00*107.45mmWeight: 1,49 kgZoom Deck DZ-01Keys: 13ZOOM Rocker: 1USB: 2 * Type-C 2.0Dimension: 260.00*130.00*53.68mmWeight: 1,38 kgTake Deck DT-01USB: 2 * Type-C 2.0Keys: 13T Stick: 1Dimension: 260.00*130.00*74.00mmWeight: 1,46 kg

Kiloview U40 HDMI to NDI 4K EncoderKiloview U40 4K P60 HDMI to NDI encoder easily converts 4K P60 HDMI to NDI® high bandwidth. At the same time, it converts various IP streams such as RTSP, SRT, RTMP, and HLS into NDI|HX, SRT, RTMP, RTSP, TS-UDP etc. With such functions like PoE + DC Out, PTZ, Tally, cold shoe mounting on camera, the Kiloview U40 is the smallest and while most powerful NDI encoder. With only one cable, video sources from HDMI cameras can easily go into the NDI® world and enjoy the advantages of IP-based transmission featuring ultra-high image quality and ultra-low latency.Technical dataInterface: HDMI 2.0Video resolution: 4K60, compatible with HDEthernet port: 2*1000M Ethernet portUSB interface: 1*USB2.0Analog audio: interface 1*3.5mm analog audioTally light: Built-inPTZ control: Support Sony Visca/Visca (Laia)/Visca (Kato)/PELCO-D/PELCO-PPoE: SupportSize: Φ: 90mm, H:30mmPower/power consumption DC: 12V1AWeight: 310gNDI performanceSupport HDMI to NDI High BandwidthSupport 3.5mm analog audio embedded in NDISupport other IP streams to NDI®|HX