D-Box (RED KOMODO-X) Expand your power options on the KOMODO-X by adding the D-Box to your system, this D-Box converts from the camera’s native V-Mount to Gold Mount. The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. There are additional 12V 2-pin, a D-tap port and a 3-pin 24V power options. When connected to the EXT port of the camera, Run/Stop is enabled on both the D-Box as well as the B-Box for (KOMODO, KOMODO-X, V-RAPTOR). On the assistant's side of the camera there is a DC-In port for connecting additional power items like block batteries and an EXT Out option is also included to pass connectivity options to a B-Box to be connected to the system, as needed.Included Items: EXT Cable (9-pin 0B RA Male to 9-pin 0B RA Male, 5in) SpecificationsD-Box Gold Mount (RED KOMODO-X): 259 g | 38.9 x 78.25 x 105 mmD-Box V Mount (RED KOMODO-X): 273.5 g | 48 x 103 x 100 mm

D-Box (Sony BURANO) Add power accessory options on the Sony BURANO by adding the D-Box to your camera system, the D-Box provides additional 12V 2-pin, a D-tap port and a 3-pin 24V power options. The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. Choose from either a Gold Mount or V-Mount option. D-Box V Mount (Sony BURANO): Weight: 400.5 g | Dimensions: 96 x 47 x 135 mmD-Box Gold Mount (Sony BURANO): Weight: 394.6 g | Dimensions: 100 x 38 x 136 mm

D-Box (Sony BURANO) Add power accessory options on the Sony BURANO by adding the D-Box to your camera system, the D-Box provides additional 12V 2-pin, a D-tap port and a 3-pin 24V power options. The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. Choose from either a Gold Mount or V-Mount option. D-Box V Mount (Sony BURANO): Weight: 400.5 g | Dimensions: 96 x 47 x 135 mmD-Box Gold Mount (Sony BURANO): Weight: 394.6 g | Dimensions: 100 x 38 x 136 mm

Wooden Camera D-Box (Sony Rialto 2) D-Box for Sony Rialto Power Strip provides 2x two-pin LEMOs at 12V, two three-pin Fischers at 24V with R/S, and one D-Tap at 12V. Five self-securing closure cable ties attach the included Y cable to the Rialto Head cable, and a new offset bracket allows you to seamlessly mount this indispensable distro module on the Rialto 2’s new extruded form factor. A00326 | D-Box Sony Rialto 2 Power Strip with Y Cable (110 inch/279 cm) Weight: 278 gDimensions: 46.5 mm x 170 mm x 180 mm A00324 | D-Box Sony Rialto 2 Power Strip with Y Cable (220 inch/559 cm) Weight: 378 gDimensions: 200 mm x 200 mm x 30 mm Included Items D-Box Sony Rialto Power StripD-Box Extension Bracket (Sony Rialto 2)D-Box Power Strip Replacement Y Cable (110 inch/279 cm) / (220 inch/559 cm)

Wooden Camera D-Box (Sony Rialto 2) D-Box for Sony Rialto Power Strip provides 2x two-pin LEMOs at 12V, two three-pin Fischers at 24V with R/S, and one D-Tap at 12V. Five self-securing closure cable ties attach the included Y cable to the Rialto Head cable, and a new offset bracket allows you to seamlessly mount this indispensable distro module on the Rialto 2’s new extruded form factor. A00326 | D-Box Sony Rialto 2 Power Strip with Y Cable (110 inch/279 cm) Weight: 278 gDimensions: 46.5 mm x 170 mm x 180 mm A00324 | D-Box Sony Rialto 2 Power Strip with Y Cable (220 inch/559 cm) Weight: 378 gDimensions: 200 mm x 200 mm x 30 mm Included Items D-Box Sony Rialto Power StripD-Box Extension Bracket (Sony Rialto 2)D-Box Power Strip Replacement Y Cable (110 inch/279 cm) / (220 inch/559 cm)

Wooden Camera D-Box (Sony Venice, Venice 2, V-Mount)SKU: 258000 D-Box (Sony Venice, Venice 2, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the Sony Venice, Sony Venice 2 camera. The D-Box main unit attaches to the back of the AXS-R7 or to the V-Mount plate on the camera rear and the Power Strip portion attaches to the top right side of the camera via a 3pin Fischer and the tape hook threaded hole. Connectors on the D-Box Power Strip are contoured to match the camera profile and connector angle which allows for all cables to be installed with no collisions. The module communicates with the camera and allows any ARRI standard start/stop trigger to be used with the 3pin Fischer port including the ARRI UMC-4 / WCU-4. The DC input on the D-Box™ is the same as the camera's 4pin XLR connector allowing for an AC power supply, external power plate, or VCLX block battery to be connected to power accessories and camera during a battery change. When both battery and DC input are utilized, the D-Box™ defaults to the DC input, leaving the onboard battery fully charged. Physical fuses have been replaced by a processor controlled amp limit which is settable to 3.8, 5.8, or 9 amps using the slide switch on the operator's side. Should the user exceed the set current for accessories, only the accessory outputs are disabled leaving the camera running normally. Once the current load has been reduced by either removing accessories or reconfiguring, the reset button can be pressed to enable accessory power again. The "DC IN" and "BATT" LEDs are dual LEDs. This means the LED If battery voltage is above 12.5V the LED will be green. If the battery voltage is below 12V the LED will be red. If the battery voltage is between those values the LED will be orange (red + green). Flashing may occur during phase transition. Highest quality Anton Bauer components are used in the V-Mount assembly and the unibody power plate design is both extremely durable and lightweight. Interfaces 1x V-Mount Power Plate2x 3pin Fischer at 24V with Run Stop- Regulator built in to convert battery voltage to 24V- Maximum 3A surge, 2.5A sustained shared between connectors2x 2pin at 12V unregulated- ARRI standard wiring- Maximum 7A current rating, shared between connectors2x D-Tap at 12V unregulated- Maximum 9A current rating, shared between connectors1x 5V USB - Maximum 2.5A1x 4pin XLR DC Input- For use with 14.4V block batteries- DC Input takes priority when voltage is between 12.9–18V- Accessories are powered when utilizing DC Input Specifications Weight: 484gDimensions: 31.8 mm x 114.3 mm x 133.35 mm

Wooden Camera D-Box (URSA Mini, URSA Mini Pro, Gold Mount) SKU: 239600 Wooden Camera D-Box (URSA Mini, Gold Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap capability to the Blackmagic URSA Mini Pro EF Mount, PL Mount, and B4 Mount cameras. The D-Box attaches directly to the back of the camera body using a special Molex connector eliminating external cabling. It also interfaces with the rear LANC port which is how the D-Box controls the camera's run/stop. Connectors on the D-Box are contoured inline with the URSA Mini body, streamlining port connections and cable management. The module also provides two 3pin Fischer ports, allowing start/stop with any ARRI standard trigger device. The D-Box (URSA Mini, Gold Mount) is equipped with a Mini 4pin XLR DC Input and includes a Mini 4pin XLR to Full 4pin XLR pigtail cable allowing an AC power supply or external power plate to be connected to power the camera and accessories during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged. Authentic Anton Bauer Gold Mount plate provides 2x D-Tap (unregulated) on the power plate itself but we should note that one D-Tap may be obscured by the right side BNC connectors when in use. The camera receives an unfused connection to the power source and the D-Box connectors share a 7.5A fuse. When using D-Box battery modules it is important to know what amount of power your batteries are capable of providing. Most high-end cinema batteries can supply up to 10A with the URSA Mini camera generally consuming 3-4A in standard configuration. Although the remaining power is available from the D-Taps, LEMOs, Fischers, etc., it is best to limit the power draw to 5A or less for best results. Consuming more power than a battery is capable of providing will cause the battery to shut itself off, killing the camera and accessory power. D-Box Connections 1. D-Tap - 12V Unregulated2. USB - 5V Regulated3. 2 pin LEMO - 12V Unregulated - ARRI standard wiring4. 2 pin LEMO - 12V Unregulated - ARRI standard wiring5. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 2A continuous (3A surge) shared between the two 3pin Fischers- ARRI standard start/stop capabilities6. 3 pin Fischer - 24V Regulated- Regulator built in to convert battery voltage to 24V- Maximum 2A continuous (3A surge) shared between the two 3pin Fischers- ARRI standard start/stop capabilities7. DC Input - 12-16V- DC input on the D-Box is a Mini 4pin XLR but a pigtail cable is included to full-size 4pin XLR- Priority is given to DC Input to preserve battery charge when both sources connected Camera Compatibility Blackmagic URSA Mini 4KBlackmagic URSA Mini 4.6KBlackmagic URSA Mini Pro

Wooden Camera D-Box (URSA Mini, URSA Mini Pro, V-Mount) SKU: 239500 Wooden Camera D-Box (URSA Mini, V-Mount) is a custom version of our popular D-Box that adds power distribution, standardized remote start/stop, and hot swap abilities for the Blackmagic URSA Mini Pro, EF, PL, B4, etc cameras. The D-Box (URSA Mini, V-Mount) attaches directly to the back of the camera body using a special Molex connector eliminating external cabling. It also interfaces with the rear LANC port which is how the D-Box controls the camera's run/stop. Connectors on the D-Box are contoured to match the URSA Mini's which allow for all cables to be installed with no collisions. The module communicates with the camera and allows any ARRI standard start/stop trigger to be used with the 3pin Fischer port. The DC input on the D-Box is a Mini 4pin XLR and the kit also includes a pigtail cable which converts to full size 4 pin XLR (same as the camera's) allowing for an AC power supply or external power plate to be connected to power accessories and camera during a battery change. When both battery and DC input are utilized, the D-Box defaults to the DC input, leaving the battery fully charged. Authentic IDX V-Mount plate provides 2x D-Tap (unregulated) on the power plate itself but we should note that one D-Tap may be obscured by the right side BNC connectors when in use. The camera receives an unfused connection to the power source and the D-Box connectors share a 7.5A fuse. When using D-Box battery modules it is important to know what amount of power your batteries are capable of providing. Most high-end cinema batteries can supply up to 10A with the URSA Mini camera generally consuming 3-4A in standard configuration. Although the remaining power is available from the D-Taps, LEMOs, Fischers, etc., it is best to limit the power draw to 5A or less for best results. Consuming more power than a battery is capable of providing will cause the battery to shut itself off, killing the camera and accessory power. D-Box Connections 1. D-Tap - 12V Unregulated 2. USB - 5V Regulated 3. 2 pin LEMO - 12V Unregulated - ARRI standard wiring 4. 2 pin LEMO - 12V Unregulated - ARRI standard wiring 5. 3 pin Fischer - 24V Regulated - Regulator built in to convert battery voltage to 24V - Maximum 2A continuous (3A surge) shared between the two 3pin Fischers - ARRI standard start/stop capabilities 6. 3 pin Fischer - 24V Regulated - Regulator built in to convert battery voltage to 24V- Maximum 2A continuous (3A surge) shared between the two 3pin Fischers - ARRI standard start/stop capabilities 7. DC Input - 12-16V - DC input on the D-Box is a Mini 4pin XLR but a pigtail cable is included to full-size 4pin XLR - Priority is given to DC Input to preserve battery charge when both sources connected Camera Compatibility Blackmagic URSA Mini 4KBlackmagic URSA Mini 4.6KBlackmagic URSA Mini Pro

Wooden Camera D-Box and B-Box System (RED KOMODO-X) This System includes the D-Box, B-Box, cables, and mounting options to attach the B-Box to the Rear Cage. The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. There are additional 12V 2-pin, a D-Tap port, and a 3-pin 24V power option. When connected to the EXT port of the camera, Run/Stop is enabled on both the D-Box and the B-Box. The B-Box has eight M2.5 threaded holes for additional accessory mounting like Accessory Rails, and Bolt-On Plate Adapters. Mounting options included with the B-Box are one 40mm Accessory Rail that is compatible with the Rear Cage mini clamp mount and a Bolt-On 3/8-16 Accessory Mount.Included ItemsD-Box - RED KOMODO-XB-Box - RED KOMODO, KOMODO-X, V-RAPTORSpecificationsD-Box (Gold Mount) and B-Box System (RED KOMODO-X): 352 g | 48 x 133 x 125 mmD-Box (V-Mount) and B-Box System (RED KOMODO-X): 367 g | 48 x 133 x 125 mm

Wooden Camera D-Box and B-Box System (RED KOMODO-X) This System includes the D-Box, B-Box, cables, and mounting options to attach the B-Box to the Rear Cage. The D-Box offers hot swap abilities when power is connected to the DC-In and an on-board battery. There are additional 12V 2-pin, a D-Tap port, and a 3-pin 24V power option. When connected to the EXT port of the camera, Run/Stop is enabled on both the D-Box and the B-Box. The B-Box has eight M2.5 threaded holes for additional accessory mounting like Accessory Rails, and Bolt-On Plate Adapters. Mounting options included with the B-Box are one 40mm Accessory Rail that is compatible with the Rear Cage mini clamp mount and a Bolt-On 3/8-16 Accessory Mount.Included ItemsD-Box - RED KOMODO-XB-Box - RED KOMODO, KOMODO-X, V-RAPTORSpecificationsD-Box (Gold Mount) and B-Box System (RED KOMODO-X): 352 g | 48 x 133 x 125 mmD-Box (V-Mount) and B-Box System (RED KOMODO-X): 367 g | 48 x 133 x 125 mm

D-Box and B-Box System (Sony BURANO) Add power accessory options to your build by adding the D-Box and B-Box System to your Sony BURANO. The D-Box provides additional 12V 2-pin, a D-tap port and a 3-pin 24V power option. Additionally, the D-Box allows for hot swap abilities when power is connected to the DC-In and an on-board battery. Expand the power distribution of the D-Box by adding a B-Box, which adds two 2-pin 12V, a 3-pin 24V as well as a Remote-In port to your camera setup. This allows users to add even more functionality to the BURANO by adding the ability to power additional accessories. This connection is established using the included B-Box Link Cable attached to the EXT port on both of the units to allow power to be transferred. Establish more control with the use of the Remote Cable, allowing Run/Stop to the 3-pin connector port via the camera's Remote port when attached to the Remote-In port on the B-Box. D-Box unit is available in either a Gold Mount or V-Mount option. Included Items D-Box (Sony BURANO)B-Box System (Sony BURANO) Specifications D-Box (V Mount) and B-Box System (Sony BURANO): Weight: 451.3 g | Dimensions: 134 x 62 x 135 mmD-Box (Gold Mount) and B-Box System (Sony BURANO): Weight: 445.9 g | Dimensions: 138 x 62 x 136 mm

D-Box and B-Box System (Sony BURANO) Add power accessory options to your build by adding the D-Box and B-Box System to your Sony BURANO. The D-Box provides additional 12V 2-pin, a D-tap port and a 3-pin 24V power option. Additionally, the D-Box allows for hot swap abilities when power is connected to the DC-In and an on-board battery. Expand the power distribution of the D-Box by adding a B-Box, which adds two 2-pin 12V, a 3-pin 24V as well as a Remote-In port to your camera setup. This allows users to add even more functionality to the BURANO by adding the ability to power additional accessories. This connection is established using the included B-Box Link Cable attached to the EXT port on both of the units to allow power to be transferred. Establish more control with the use of the Remote Cable, allowing Run/Stop to the 3-pin connector port via the camera's Remote port when attached to the Remote-In port on the B-Box. D-Box unit is available in either a Gold Mount or V-Mount option. Included Items D-Box (Sony BURANO)B-Box System (Sony BURANO) Specifications D-Box (V Mount) and B-Box System (Sony BURANO): Weight: 451.3 g | Dimensions: 134 x 62 x 135 mmD-Box (Gold Mount) and B-Box System (Sony BURANO): Weight: 445.9 g | Dimensions: 138 x 62 x 136 mm

Wooden Camera D-Box for FUJIFILM GFX ETERNA 55The D-Box™ plays a critical role in the camera's power system by acting as both a power distribution hub and a hot swap for other powered accessories. Its primary function is to supply power to the camera to ensure continuous operation throughout filming. In addition, it distributes power to other connected accessories, serving as the central power management point for the entire camera setup. The D-Box has two P-Tap ports, a DC-IN port for power supplies and hot swapping, an EXT port to distribute power and trigger communication, and a Remote Port that translates trigger information into the D-Box.The DC-IN port allows hot-swapping of the on-board battery without powering down the camera or attached accessories with a green LED indicator confirming that the port is active. The 5-Pin EXT port distributes trigger signals and power to the Power Strip (sold separately). The D-Box also features an eject button for quick battery swaps and a blue LED indicator that lights up when power is drawn from that source.The D-Box has a built-in electronic fuse that prevents overcurrent to accessories, allowing uninterrupted power to the camera. A red LED indicator illuminates if the electronic fuse is triggered. For camera control, the D-Box includes a Remote Port that accepts a TRS cable, which carries Run/Stop signals from the camera to the D-Box and then passes them through the 5-Pin EXT port to the Power Strip. Finally, the D-Box is designed with two screw-in points on its underside, allowing for direct attachment of our support bracket for secure and stable integration into the camera rig using our Riser Plate. Note: Remote port on DBox for future FUJIFILM ETERNA GFX 55 Firmware UpdateSpecificationsWeightGold Mount: 293.3 gV-Mount: 277.6 gDimensionsGold Mount: 74 x 47.5 x 99.4 mmV-Mount: 78.3 x 39 x 105.2 mm

Wooden Camera D-Box Link Cable (5-Pin 0B Straight Male to 5-Pin 0B Straight Male)SKU: A00948The 3.5" bi-directional cable enables a straight to straight connection to relay power and Run/Stop commands from a D-Box™ to power accessories, such as the Power Strip for FUJIFILM GFX ETERNA 55, Sony BURANO B-Box, or Sony VENICE Power Strip.Please note: The Remote Port must be connected to the camera using the Remote Cable for Run/Stop to be enabled on the FUJIFILM GFX ETERNA 55 and Sony BURANO.SpecificationsWeight: 4.63 gDimensions: 160.9 x 9.4 x 9.4 mm

D-Box Power Strip (Sony Rialto, Rialto 2) SKU: A00329 D-Box for Sony Rialto Power Strip provides 2x two-pin LEMOs at 12V, two three-pin Fischers at 24V with R/S, and one D-Tap at 12V. Weight: 77 gDimensions: 23.6 x 88 x 40.4 mm

Wooden Camera D-Box Sony Rialto 2 Power Strip Replacement Y Cable A replacement Y cable for the D-Box Sony Rialto Power Strip A00322 | D-Box Sony Rialto 2 Power Strip Replacement Y Cable (110 inch/279 cm) Weight: 136 g Dimensions: 160 mm x 160 mm x 24 mm A00319 | D-Box Sony Rialto 2 Power Strip Replacement Y Cable (220 inch/559 cm)Weight: 236 g Dimensions: 160 mm x 160 mm x 30 mm

Wooden Camera D-Box Sony Rialto 2 Power Strip Replacement Y Cable A replacement Y cable for the D-Box Sony Rialto Power Strip A00322 | D-Box Sony Rialto 2 Power Strip Replacement Y Cable (110 inch/279 cm) Weight: 136 g Dimensions: 160 mm x 160 mm x 24 mm A00319 | D-Box Sony Rialto 2 Power Strip Replacement Y Cable (220 inch/559 cm)Weight: 236 g Dimensions: 160 mm x 160 mm x 30 mm

D-Box® System for FUJIFILM GFX ETERNA 55This versatile power distribution system is designed to meet the diverse power needs of filmmakers. The D-Box® acts as the system's central power hub and hot swap station for camera and accessories; multiple ports (P-Tap, DC-IN, EXT, and Remote) ensure compatibility.The DC-IN port supports hot-swapping batteries without any equipment downtime. The EXT port can distribute power and trigger signals to other accessories, while the Remote Port allows for communication to the camera for triggering record.The Power Strip for FUJIFILM GFX ETERNA 55 offers integrated power distribution, featuring 2-Pin 14V and 3-Pin 14V power outlets and Run/Stop functionality, which eliminates the need for an external power source. Its 5-Pin connector enables pass-through power and trigger ability from the D-Box®. The included Support Bracket ensures stability by securely attaching the D-Box® to the Riser Plate, with adjustable height for optimal camera configuration. The system also includes a 3.5" bi-directional cable for power and Run/Stop commands between compatible devices, and a 4" TRS cable for remote Run/Stop functionality to the D-Box®.Included ItemsPower Strip for FUJIFILM GFX ETERNA 55D-Box for FUJIFILM GFX ETERNA 55 V-Mount or Gold MountD-Box Link Cable (5-Pin 0B Straight Male to 5-Pin 0B Straight Male)D-Box Support Bracket for FUJIFILM GFX ETERNA 55Remote Cable (Sony BURANO and FUJIFILM GFX ETERNA 55)SpecificationsD-Box System for FUJIFILM GFX ETERNA 55 V-Mount: Weight: 444.1 g | Dimensions: 152.9 x 124.6 x 45.7 mmD-Box System for FUJIFILM GFX ETERNA 55 Gold Mount: Weight: 427.3 g | Dimensions: 152.9 x 124.6 x 45.7 mm

D-Box® System for FUJIFILM GFX ETERNA 55This versatile power distribution system is designed to meet the diverse power needs of filmmakers. The D-Box® acts as the system's central power hub and hot swap station for camera and accessories; multiple ports (P-Tap, DC-IN, EXT, and Remote) ensure compatibility.The DC-IN port supports hot-swapping batteries without any equipment downtime. The EXT port can distribute power and trigger signals to other accessories, while the Remote Port allows for communication to the camera for triggering record.The Power Strip for FUJIFILM GFX ETERNA 55 offers integrated power distribution, featuring 2-Pin 14V and 3-Pin 14V power outlets and Run/Stop functionality, which eliminates the need for an external power source. Its 5-Pin connector enables pass-through power and trigger ability from the D-Box®. The included Support Bracket ensures stability by securely attaching the D-Box® to the Riser Plate, with adjustable height for optimal camera configuration. The system also includes a 3.5" bi-directional cable for power and Run/Stop commands between compatible devices, and a 4" TRS cable for remote Run/Stop functionality to the D-Box®.Included ItemsPower Strip for FUJIFILM GFX ETERNA 55D-Box for FUJIFILM GFX ETERNA 55 V-Mount or Gold MountD-Box Link Cable (5-Pin 0B Straight Male to 5-Pin 0B Straight Male)D-Box Support Bracket for FUJIFILM GFX ETERNA 55Remote Cable (Sony BURANO and FUJIFILM GFX ETERNA 55)SpecificationsD-Box System for FUJIFILM GFX ETERNA 55 V-Mount: Weight: 444.1 g | Dimensions: 152.9 x 124.6 x 45.7 mmD-Box System for FUJIFILM GFX ETERNA 55 Gold Mount: Weight: 427.3 g | Dimensions: 152.9 x 124.6 x 45.7 mm

Wooden Camera Gold Mount Plus D-Box System for Sony VENICESKU: A00607Designed to seamlessly integrate and maximize power efficiency on the Sony VENICE and Sony VENICE 2, the Gold Mount Plus D-Box expands power options for both the camera and accessories. Running 26v as an input source allows the camera’s native accessory outputs to expand to 2A. This system includes a 3.5-inch 5-pin D-Link cable and a Power Strip, providing enhanced connectivity and streamlined power management.D-Box Power Strip features contoured connectors that match the camera’s profile and connector angles, ensuring all cables can be installed without collisions. This Power Strip communicates with the camera, allowing for the use of any ARRI standard start/stop trigger. It attaches to the top right side of the camera via a 3-pin connector and includes a Tape Hook threaded hole, offering a secure and reliable connection.The Gold Mount Plus D-Box offers onboard hot-swap capability with DC-In power ensuring seamless transitions between power sources.This D-Box includes 2x D-Tap connectors at 15V regulated, with a maximum 5.8A current rating shared between connectors, providing additional power flexibility for external accessories. With high-efficiency power distribution and flexible expansion options, the Gold Mount Plus D-Box™ is an essential upgrade for Sony VENICE users looking for enhanced power management and accessory support. Weight: 485.3 g Dimensions: 163 x 40.5 x 144 mmMultiple power outputs for accessories2x 3-pin connectors unregulated 26V with Run Stop2x 2-pin at 15V regulatedConnectors4-Pin XLR Cable powers the camera body8-Pin 2B connector for DC-In = 2x D-Tap ports2x 3pin connector at 26V unregulated with Run Stop2x 2pin at 15V regulatedIncluded ItemsGold Mount Plus D-Box for Sony VENICED-Box Link Cable (5-Pin RA to 5-Pin Straight, 3.5in)D-Box Sony VENICE, VENICE 2 Replacement Power Strip

Wooden Camera Power Strip for FUJIFILM GFX ETERNA 55SKU: A00934The Power Strip offers users a streamlined solution for incorporating power distribution directly into their camera rigs, eliminating the need for an external power source. Equipped with both 2-Pin 14V and 3-Pin 14V power outlets, the Power Strip provides power to various camera accessories while offering integrated Run/Stop functionality when teamed up with our D-Box.The Power Strip features a 5-Pin connector at its rear that enables pass-through power and trigger ability from the D-Box™. This ensures uninterrupted power flow while avoiding potential interference with the camera's top handle.The Power Strip can be attached to the top of the camera using two ⅜”-16 screws and includes multiple mounting points on its top surface, as well as openings on the side that allow for attaching to the Front and Rear Top Plates. This expands mounting options across the top of the camera, enabling users to integrate other accessories into their setup.SpecificationsWeight: 137.9 gDimensions: 153.6 x 46.5 x 17.2 mm