Axcom SM-CPVM-2 + 2 x U-SVLO-150UD Set includes 1 x Axcom SM-CPVM-22 x Axcom U-SVLO-150

Axcom SM-CPVM-2 + 2 x U-SVLO-190UD Set includes 1 x Axcom SM-CPVM-22 x Axcom U-SVLO-190

Axcom SM-CPVM-2 2-Slot V-Mount Battery Charger of the german manufacturer axcom with 2 slots to charge two V-Mount batteries simultaneously. With a 4 Pin XLR Output (60W 15V 4.0A). The weight is 1kg. Axcom SM-CPVM-2 includes charger, mains cable, XLR extension cable and manual. Input: 90V - 240VOutput for V-Mount Batteries: 16.8V 2.65AOutput 4 Pin XLR: 60W 15V 4.0A Charging times 4.4Ah approximately 2,5 hours6.6Ah approximately 3,8 hours8.8Ah approximately 5,0 hours11Ah approximately 6,3 hours13,2Ah approximately 7,6 hours

Axcom SM-CPVM-4 V-Mount battery charger of the german manufacturer axcom with 4 slots to charge four V-Mount batteries simultaneously. Axcom SM-CPVM-4 with a 4 Pin XLR Output (60W 15V 4.0A). The weight is 2,8kg. Includes 1 x Charger1 x Mains cable1 x XLR extension cable1 x Manual Features Input: 90V - 240VOutput for V-Mount Batteries: 16.8V 2.5AOutput 4 Pin XLR: 60W 15V 4.0A Charging times 4.4Ah approximately 2,7 hours6.6Ah approximately 4,0 hours8.8Ah approximately 5,3 hours11Ah approximately 6,6 hours13,2Ah approximately 7,9 hours

Core SWX Cube Plus XLR V-mt Core’s Cube Plus DC is a lightweight, all aluminum on-board power module capable of powering a camera or device, while simultaneously charging an on-board battery pack up to 3A per hour(~2hrs to fully charge a 98wh pack). The Cube Plus DC, when having an on-board pack mounted, is designed to act like an uninterruptable power source should DC input power be disconnected. Not only will the device switch from the DC power source to on-board power for the camera or device, but the two ptap connections are also backed up. The unit has a 4pin XLR DC input to accept 12 to 34 volts, providing you the flexibility of using various outputs from your block battery style, like Core’s Maverick MV6, or a AC to DC power supply. The Cube Plus DC has internal protections along with a replaceable 15A fuse. Features Lightweight, all aluminum on-board power moduleMounts on to a camera or device like a battery pack2x ptaps to power accessories(powered by both power supply or on-board battery)Acts like a UPS if DC Input is disconnected(as long as an on-board battery is mounted)Simultaneous charges a battery pack while powering a camera/device*Red and green status LEDs for charge and power to camera/deviceAll Aluminum design12-30v DC input voltageFanless and operates silentlyDC Output: up to 200w(dependent upon DC input power source)Quick Charge Current: up to 3A*Protection: Over Current, Voltage & TemperatureDimensions: 121,9 mm x 94 mm x 83,8 mmWeight: 544 gInput Voltage: DC 12-34v

Core SWX CUBE-PLV Core’s Cube Plus is a lightweight, all aluminum 120w on-board power supply capable of powering a camera or device, while simultaneously charging an on-board battery pack up to 3A (depending on the power supply load, charge speed may reduce) per hour(~2hrs to fully charge a 98wh pack). The Cube Plus, when having an on-board pack mounted, is designed to act like an uninterruptable power source should AC mains power be disconnected. Not only will the device switch from AC to on-board power for the camera or device, but the two p-tap connections are also backed up. The Core SWX Cube Plus has internal protections along with a replaceable 10A fuse. It accepts 100-240VAC, making it useable worldwide and it includes an AC power cord. Furthermore, it’s fan-less, and operates silently. Features Lightweight, all aluminium 120w on-board power supplyMounts on to a camera or device like a battery pack2x ptaps to power accessories(powered by both power supply or on-board battery)Acts like a UPS if AC mains is disconnected(as long as an on-board battery is mounted)Simultaneous charges a battery pack while powering a camera/device*Red and green status LEDs for charge and power to camera/deviceAll Aluminium design90-240 VAC worldwide compatible input voltageFanless and operates silently Technical data DC Output: 120W max(14.3v) to camera mains connection and 2x ptap.Quick Charge Current: up to 3A*Protection: Over Current, Voltage & Temperature Dimensions:121,9 mm x 94 mm x 83,8 mmWeight: 0,5 kgInput Voltage: AC 100-240V 50/60Hz

Core SWX Fleet Q4 Mini Series The Fleet Q4 Mini Charger is a compact and versatile charging solution designed to provide efficient charging for your battery packs. With the Core SWX Fleet Q4 Mini Charger, you can charge a variety of battery packs commonly used in rental, ENG, and cinema applications. The charger can handle all battery sizes available in Core’s lineup. However, when all four packs are connected, it can only accommodate the 50Wh, 98Wh, and 150Wh battery packs, specifically the NANO, NEO, or HelixMax models. Similar to its larger counterpart, the Fleet Q4 Mini Charger features independent charge bays. Each bay focuses on the individual battery connected, ensuring fast and efficient charging. You can expect to recharge four 98Wh battery packs in just 2.5 hours, offering one of the industry’s fastest charge times. When space is at a premium, whether on a busy film set or when packing gear for travel, the small footprint of the Fleet Q4 Mini Charger becomes a crucial advantage. Its compact size allows you to maximize the available space and optimize your workflow. Despite its compact size, the Fleet Q4 Mini Charger does not compromise on durability. Constructed with a slim, lightweight aluminum design, it provides portability and ease of use. The charger’s low-profile design minimizes space requirements and allows for easy stacking when multiple chargers are utilized. The Fleet Mini Charger combines reliability, efficiency, and portability, making it an excellent choice for your charging needs. Whether you’re working on a film set, ENG shoot, or rental application, this charger will deliver the power you need to keep your batteries ready for action. Quick Charge Current: 3APower Range per Channel: up to 48watts/hr.Size: 23,37 cm x 17,53 cm x 7,62 cmWeight: 1,49 kgInput Voltage: 90-240VAC 50/60Hz

Core SWX FLEET-DM2S The Core SWX Fleet Micro series of chargers are the most advanced in the industry.  The chargers offer a complete battery management system for your battery “Fleet,” including an on-board LCD to monitor the battery packs’ smart battery data.  Besides being the fastest battery charger in the industry today(four 98wh packs in under 2 1/2hrs.), the charger offers a TEST mode to determine battery health and recharge performance. With the inclusion of a micro USB on the rear of the unit, that data can then be viewed and managed with a PC application.  The micro USB doubles as an input for future free firmware upgrades(downloadable via the web). In addition to battery management, the Fleet Micro chargers includes SafeFly mode.  With one touch of the onboard membrane button console, the charger will either charge the connected packs to up to 30% or discharge to under 30%, depending on the state of charge of those connected.  The one-touch operation allows you to quickly prepare all packs for air travel or shipment.  This feature can also be applied to a single connected pack. The Fleet Micro series is also the most cross-compatible, able to address not only Core SWX battery packs but those offered by RED, Anton/Bauer, and many more.  With this additional charge compatibility, it provides piece of mind that whether you’re on location with multiple crews, charging legacy packs, or your rental Fleet, the Fleet Micro has you covered. The Core SWX Fleet Micro series includes a 90w DC 4-pin XLR power supply to power most cameras.  In addition to the on-board power supply, the charger doubles as a battery bank when in “Hypercine” power supply mode(unregulated 12v-16.8v DC).  The charger parallels all the on-board battery packs to provide continuous power, and the charger’s LCD reports back available capacity as well as remaining runtime.  With the optional “Hypercine module,” the charger provides both unregulated 12v-16.8v 4-pin XLR, as well as 28v regulated 3-pin XLR DC outputs. Quick Charge Current: 3A SimultaneousDischarge Current: Up to 2A per channelSize: 23.11 cm x 8.51 cm x 16.69 cmWeight: 0.82 kgInput Voltage: 90-240VAC 50/60Hz4x20 Character Backlit LCD

Core SWX GP-X4S The Core SWX X4 charger is a compact charger with an upright design and a lightweight, plastic housing. It offers a simultaneous 2.6A charging as well a single bay per side fast charge. When only needing to charge one battery pack on each side, the rapid charge will charge the pack at 2.6A (one 98wh pack in under 2.5hrs). When two packs are placed on either side, the charge will charge the lesser charged pack up to the same level as the other, then charge both at 2.6A current combined. Trickle charge maintenance program ensures the batteries are always at maximum capacity. The charger is compact enough to fit into a camera bag yet versatile, addressing all batteries simultaneously. This charger will charge four "micro" sized packs( NANO Micro V-Mt / NANO Micro 3-Stud) at a time, but can only charge two large size packs(NEO, Hypercore) because of a mechanical incompatibility. Features Micro Quad Batter Charger4hrs charge for four 98wh packsUpright design Includes AC CableCompact charge that can charge four micro sized batteries silmultaneouslyRapid charge will charge the pack at 2.6A (one 98wh pack in under 2.5hrs)Trickle charge maintenance program2 versions available: V-mount or 3-Stud

Core SWX GT8 V-mount SKU: GT8-Q4S Core SWX GT8 V-mount is a rapid quad V-mount charger for Helix MAX packs. The GT8 is not only fast, but it’s built to last and perform, comprised of an all-aluminum construction and proudly made in the USA. Its advanced Sub60 Charge algorithms is designed to maximize charge efficiency while ensuring the safety and longevity of your battery packs. The fast charge algorithm is specially designed to maximize charge efficiency without harming the battery packs or reducing their service life. You can trust the GT8 charger to provide reliable and safe charging for your essential equipment. Technical data Quick Charge Current: 4A @33v Simultaneous Size: 23,11 cm x 8,51 cm x 30,91 cm Weight: 2,27 kg Input Voltage: 90-240VAC 50/60Hz

Core SWX MACH-Q4MSi Core SWX MACH-Q4MSi is a Four position charger, 4A Simultaneous rapid charge, Adaptive Charge Control - V-mount. The MACH-Q4MSi offers 4A rapid, simultaneous charging along with Adaptive Charge Control (ACC), Core’s proprietary charge protocol which can evaluate battery health during each pack’s charging cycle. Additional features include a standalone discharge function along with offering Core’s patented VoltBridge wireless monitoring platform. Features Four position charger, 4A Simultaneous rapid charge, Adaptive Charge ControlFour independent charge bays with Simultaneous chargingApproximately 90min. charge time for four 98Wh batteriesRed and green status LEDs with diagnostic LCD and Test functionCompatible with Voltbridge and Voltbridge Mesh Enterprise90-240 VAC worldwide compatible input voltage Technical data Quick Charge Current: 4A SimultaneousDischarge Current: Up to 2A per channelLCD: 4x20 Character BacklitSize: 22,6 x 8,5 x 31,5 cmWeight: 2,3 kgInput Voltage: 90-240VAC 50/60Hz

Core SWX MACH-Q4S Featuring four independent charge bays, the MACH4 Charger is capable of charging four batteries simultaneously by focusing on each individually. Offering the fastest charge speed on the market, the charger can completely charge four 98Wh batteries in approximately 90min. Red and green LEDs indicate charging/complete status. Supporting 90-240 VAC input voltage, the Mach4 is worldwide compatible.The new low profile design is over1/2” thinner than comparable models. The charger features a recessed carry handle that makes transport convenient. The housing is made of aluminium, providing for a robust build and made in the USA. Features Four position charger, 4A rapid chargeFastest charger on the market at 4AApproximately 90min. charge time for four 98wh batteriesFour independent charge baysSimultaneous chargingRed and green status LEDs90-240 VAC worldwide compatible input voltageAluminium buildWeighs 5 lbsApproximately 3.15" thickRecessed carry handleAvailable in V-mount or 3-stud versionsQuick Charge Current: 4A SimultaneousSize: 8.9” x 3.15” x 12.4”Weight: 5lbs.Input Voltage: 90-240VAC 50/60Hz

Core SWX X2 Charger HV SKU: GP-X2RHV Large capacity packs require fast chargers to recharge the packs. Core has developed an economical series of chargers dubbed “X2R” to allow for the Apex system to deliver to even the most budget conscience user. To leverage the high voltage capabilities of the APX-360HV, the pack does require the high voltage variant of the Apex two position charger (#GPX2RHV). The GPX2RHV will also charge Helix MAX V-mount packs. The Apex charger models are capable of either charging one pack in a little over 5hours or two Apex packs in less than 10 hours. Technical data Input: 100V-240VAC 50/60Hz Charge current: One pack 2.6A @33.6v, Two packs simultaneous at 1.3A Size: 11,4 cm x 14 cm x 7,6 cm Weight: 590 g Mount Type: Helix V-mount

Core SWX X2 Charger LV SKU: GP-X2RV Large capacity packs require fast chargers to recharge the packs. Core has developed an economical series of chargers dubbed “X2R” to allow for the Apex system to deliver to even the most budget conscience user. While the GP-X2RV charger is ideal for the APX-360V, the pack can be charged on any 14.8v Lithium ion charging system but given the large capacity of the packs charge time will vary based on charger. The Apex charger models are capable of either charging one pack in a little over 5hours or two Apex packs in less than 10 hours. Technical data Input: 100V-240VAC 50/60Hz Charge current: One pack 5.2A @16.8v, Two packs simultaneous at 2.6A Size: 11,4 cm x 14 cm x 7,6 cm Weight: 590 g Mount Type: V-mount

Core SWX X2 Mini Charger V-Mount SKU: GPM-X2S The Core SWX X2 Mini is a super compact charger with an upright design and a lightweight, plastic housing. It offers a simultaneous 1.5A charging as well a “Fleet Rapid Charge” bay. When only needing to charge one battery pack, place it on the rapid charge channel for a 3A charge, and take advantage of the Fleet series charge time (one 98wh pack in under 2.5hrs). Trickle charge maintenance program ensures the batteries are always at maximum capacity. Technical data Input: 100V-240VAC 50/60Hz Charge current: One battery 3A, 2 batteries simultaneous 1.5A Size: 11,43 cm x 13,97 cm x 7,62 cm Weight: 50 g

FXLion PL-Q4B12 V-Mount Wall Charger SKU: PL-Q4B12 Using a 12-Channel Wall charger is a convenient way to make sure all your batteries are always ready for the set. Best suited for rental houses. The Kit includes screws and plates for wall-mounting. And it only uses one power cable. With three switches, you can power just four channels at once – or all twelve together. The sturdy aluminum housing and three fans on top make sure the device doesn’t overheat. The status display shows the battery voltage and charging output, so you always know the percentage of each individual battery. Easy to use – with a big impact on charging control. Charging time 100wh battery: 2.2h130wh battery: 2.8h160wh battery: 3.2h190wh battery: 3.9h250wh battery: 4.8 Specifications Input: 100~240VAC 47~63HzDC Outputs: 12 Channels x 16.8V/4.0ADimensions: 785 mm x 540 mm x 110 mmWeight: 14’000g

Hawk-Woods RP-MX4 Hawk-Woods's latest 4-channel Reel Power simultaneous charger offers a more sleek and compact look than our previous simultaneous model. Still keeping the simultaneous function so that you may charge all four batteries at once for ultimate charging times! This charger is fitted with 2A boards and is suited for our mini-RP battery range as well as our high performance and classic Reel Power batteries. LED's fitted for battery status, also fitted with soft leather carry handle. Weight: 1.86kg Size: 12 x 14 x 22 cm Current: 2.0Ah

Hawk-Woods VL-MX8 Hawk-Woods VL-MX8 latest 8-channel V-Lok semi-sequential charger simultaneously charges four batteries at any one time, which then moves onto the other four channels. Given the chargers capability of charging 8x batteries the MX8 is still relatively small and compact compared to other chargers on the market which are of a similar size and only four channels. A fantastic option for charging your kit of batteries from a single solution. Channels one to four will charge firstly, these fittings are labelled at the front and side of charger. Channels five to eight will then charge once the charge has completed on the previous set. LED's fitted for battery status, also fitted with soft leather carry handle.Charging current - 2.3AWeight: 2.08kgSize: 12.5 x 15 x 21 cm

HEDBOX HED-DC150V The HED-DC150V is a Digital LCD Dual battery charger that conveniently charges two professional batteries simultaneously. Using the latest battery charging technologies, with zero-volt charging activation, allows you to charge two batteries at the same time saving you both time and money. The LCD display with blue backlight illuminations provides a clear, accurate, and precise display of power and charging status. Equipped with extra support stands, greater stability is provided when charging only one battery. Using the dedicated Hedbox DC Power Cable RPC-DC4X4 4-pin XLR female to male, the HED-DC150V becomes a powerful power bank station. Features LCD Display Screen with Back-lightPower Bank ModeCharging TechnologyConstant Current & Impulse VoltageIntegrated locking support standDC Out 16.5V, 4.5A / 75W Technical data AC Power In: AC 110 – 240V , 50/60HzBattery Mount: V-Lock and V Mount Battery PlatePower Consumption: Max 85WDC Power Out: DC 16.5V / 4.5A / 75W (max)Power Bank Out: DC 16.5V / 4.5A / 75WCharging Type: Ni-CD , Ni-MH , Li-IonOperating Temperature: –20°C to +45°CDimensions (WxDxH): 124 x 114 x 445 mmWeight: 1.2 Kg In the box 1 x HED-DC150V LCD Dual Battery Charger1 x RPC-DC4X4 DC 4Pin XLR Power Cable 2m1 x 110V – 220V AC Power Cord1x User Manual (English)

Hedbox MEGABANK-4LHedbox MEGABANK-4L is an Intelligent Digital Quad Battery Charger system with four V-Mount (V-Lock) Batteries featuring simultaneous charging and UPS/Power Bank capabilities. LED status indicators provides clear, accurate and precise reporting while integrated support stands ensure stable operation when only one battery is mounted.The included 4-pin XLR female to male DC Power Cable (RPC-DC4X4) enables the MEGABANK-4L to be used as a Power Bank, providing power to the DC output from the AC-input or fitted V-Lok batteries. DC output power of up to 14.5V 4.5A 75W is available. When running as a Power Bank should the AC-input fail, then the power to the DC is seamlessly switched to a fitted battery, and then to the second battery upon depletion of the first battery, then to the third battery upon depletion of the second battery, and to the forth battery upon depletion of the third battery. This UPS and Continuous Power Supply feature provides a valuable and constant DC power supply for audio, video and lighting equipment with total independence of the regular grid power supply.Technical dataAC Power In: AC 110 – 240V , 50/60HzBattery Mount: V-Lock and V Mount Battery PlatePower Consumption: Max 85WPower Capacity 1: 13400mAh / 195 Wh Single ChanelPower Capacity 2: 26800mAh / 390 Wh Dual ChanelPower Capacity 3: 40200mAh / 585 Wh Single ChanelPower Capacity 4: 56600mAh / 780 Wh Single ChanelDC Power Out: DC 16.5V / 4.5A / 75W (max)Power Connection Out: 4-Pin XLRBattery Power Type: Li-IonOperating Temperature: –20°C to +45°CDimensions (WxDxH): 124 x 114 x 445 mmWeight: 4.45 KgCharging Method: MEGABANK-4L use advance Constant Current and Impulse Voltage charging Methods In the box1 X RP-DC200V DIGITAL QUAD CHAGER4 X NERO-L LI-ION BATTERY1 X RPC-DC4X4 DC 4-PIN XLR POWER CABLE1 X 110V ~ 240V POWER SUPPLY CABLE1 X USER MAUNAL (ENGLISH)1 X 2 YEAR LIMITED MANUFACTURER'S WARRANTY

Hedbox MEGABANK-4MHedbox MEGABANK-4M is an Intelligent Digital Quad Battery Charger system with four V-Mount (V-Lock) Batteries featuring simultaneous charging and UPS/Power Bank capabilities. LED status indicators provides clear, accurate and precise reporting while integrated support stands ensure stable operation when only one battery is mounted. The included 4-pin XLR female to male DC Power Cable (RPC-DC4X4) enables the MEGABANK-4M to be used as a Power Bank, providing power to the DC output from the AC-input or fitted V-Lok batteries. DC output power of up to 14.5V 4.5A 75W is available.Technical dataAC Power In: AC 110 – 240V , 50/60HzBattery Mount: V-Lock and V Mount Battery PlatePower Consumption: Max 85WPower Capacity 1: 10400mAh / 150 Wh Single ChanelPower Capacity 2: 20800Ah / 300 Wh Dual ChanelPower Capacity 3: 31200mAh / 350 Wh Triple ChanelPower Capacity 4: 41600mAh / 600 Wh Quad ChanelDC Power Out: DC 16.5V / 4.5A / 75W (max)Power Connection Out: 4-Pin XLRBattery Power Type: Li-IonOperating Temperature: –20°C to +45°CDimensions (WxDxH): 124 x 114 x 445 mmWeight: 3.75 KgCharging Method: MEGABANK-4M use advance Constant Current and Impulse Voltage charging MethodsIn the box1 X RP-DC200V DIGITAL QUAD CHAGER4 X NERO-M LI-ION BATTERY1 X RPC-DC4X4 DC 4-PIN XLR POWER CABLE1 X 110V ~ 240V POWER SUPPLY CABLE1 X USER MAUNAL (ENGLISH)1 X 2 YEAR LIMITED MANUFACTURER'S WARRANTY

Hedbox PROBANK-2MHedbox PROBANK-2M is an Intelligent Digital Dual Battery Charger system with two V-Mount (V-Lock) Batteries featuring simultaneous charging and UPS/Power Bank capabilities. LED status indicators provides clear, accurate and precise reporting while integrated support stands ensure stable operation when only one battery is mounted.The included 4-pin XLR female to male DC Power Cable (RPC-DC4X4) enables the PROBANK-2M to be used as a Power Bank, providing power to the DC output from the AC-input or fitted V-Lok batteries. DC output power of up to 14.5V 4.5A 75W is available.Technical dataModel: PROBANK-2M Intelligent Dual Digital Professional Battery Charger SystemAC Power In: AC 110 – 240V , 50/60HzBattery Mount: V-Lock and V Mount Battery PlatePower Consumption: Max 85WPower Capacity 1: 10400mAh / 150 Wh Single ChanelPower Capacity 2: 20800mAh / 300 Wh Dual ChanelDC Power Out: DC 16.5V / 4.5A / 75W (max)Power Connection Out: 4-Pin XLRBattery Power Type: Li-IonOperating Temperature: –20°C to +45°CDimensions (WxDxH): 124 x 114 x 445 mmWeight: 2.50 KgCharging Method: PROBANK-2M use advance Constant Current and Impulse Voltage charging MethodsIn the box1 X HED-DC150V DIGITAL DUAL CHAGER2 X NERO-M LI-ION BATTERY1 X RPC-DC4X4 DC 4-PIN XLR POWER CABLE1 X 110V ~ 240V POWER SUPPLY CABLE1 X USER MAUNAL1 X 2 YEAR LIMITED MANUFACTURER'S WARRANTY

HedBox PROBANK-2SHedbox PROBANK-2S is an Intelligent Digital Dual Battery Charger system with two V-Mount (V-Lock) Batteries featuring simultaneous charging and UPS/Power Bank capabilities. LED status indicators provides clear, accurate and precise reporting while integrated support stands ensure stable operation when only one battery is mounted.The included 4-pin XLR female to male DC Power Cable (RPC-DC4X4) enables the PROBANK-2S to be used as a Power Bank, providing power to the DC output from the AC-input or fitted V-Lok batteries. DC output power of up to 14.5V 4.5A 75W is available.Technical dataModel: PROBANK-2S Intelligent Dual Digital Professional Battery Charger SystemAC Power In: AC 110 – 240V , 50/60HzBattery Mount: V-Lock and V Mount Battery PlatePower Consumption: Max 85WPower Capacity 1: 6600mAh / 98 Wh Single ChanelPower Capacity 2: 13200mAh / 196 Wh Dual ChanelDC Power Out: DC 16.5V / 4.5A / 75W (max)Power Connection Out: 4-Pin XLRBattery Power Type: Li-IonOperating Temperature: –20°C to +45°CDimensions (WxDxH): 124 x 114 x 445 mmWeight: 2.50 KgCharging Method: PROBANK-2S use advance Constant Current and Impulse Voltage charging Methods In the box1 X HED-DC150V DIGITAL DUAL CHAGER2 X NERO-S LI-ION BATTERY1 X RPC-DC4X4 DC 4-PIN XLR POWER CABLE1 X 110V ~ 240V POWER SUPPLY CABLE1 X USER MAUNAL (ENGLISH)1 X 2 YEAR LIMITED MANUFACTURER'S WARRANTY

Hedbox RP-DC200VHedbox RP-DC200V is an Intelligent Digital Quad Battery Charger for V-Mount (V-Lock) Batteries featuring simultaneous charging and UPS/Power Bank capabilities. LED status indicators provides clear, accurate and precise reporting while integrated support stands ensure stable operation when only one battery is mounted.The included 4-pin XLR female to male DC Power Cable (RPC-DC4X4) enables the RP-DC200V to be used as a Power Bank, providing power to the DC output from the AC-input or fitted V-Lok batteries. DC output power of up to 14.5V 4.5A 75W is availableIn the box1 X RP-DC200V INTELLIGENT DIGITAL QUAD BATTERY CHARGER1 X RPC-DC4X4 DC 4-PIN XLR POWER CABLE1 X 110V ~ 240V POWER SUPPLY CABLE1 X USER MAUNAL (ENGLISH)1X 2 YEAR LIMITED MANUFACTURER'S WARRANTY