AdiCam MINI Cameraman or sound engineer often have to solve a lot of difficulties such as irregular footage area or small, difficult space. The appropriate and stable setup as well as possibility of fast cameras and supplementary equipment movement can really help in the tasks realization.This help is provided by the lightest film cart in our offer – adicam MINI. Adicam MINI weighs barely 28.5 kg and allows to transport the equipment even five times heavier. This model has four hand-folded wheels (8″-fi200 mm) which are equipped with sealed bearings. Swivel wheels have been enriched with breaks which guarantees more stability in difficult conditions. Each deck has been covered with facing to prevent displacing of the equipment. The cart can be folded to small dimensions suitcase which can be easy carried by most of the cars. Assembly and disassembly takes only 2 minutes and is incredibly effortless. The wide list of the available accessories allows for a configuration by choice. Technical data Folded cart dimensions: height 150mm / width 630mm / lenght 860mm Assembled cart dimensions: height 980mm / width 630mm / lenght 860mm Weight: 28,5 kg without accessories Capacity: max 150kg Wheels 8″ Pneumatic wheels with two brakes. 9″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 5,35kg and the height by 20mm) 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 6,1kg and the height by 50mm - will not fit inside the folded cart)
AdiCam MINI Cameraman or sound engineer often have to solve a lot of difficulties such as irregular footage area or small, difficult space. The appropriate and stable setup as well as possibility of fast cameras and supplementary equipment movement can really help in the tasks realization.This help is provided by the lightest film cart in our offer – adicam MINI. Adicam MINI weighs barely 28.5 kg and allows to transport the equipment even five times heavier. This model has four hand-folded wheels (8″-fi200 mm) which are equipped with sealed bearings. Swivel wheels have been enriched with breaks which guarantees more stability in difficult conditions. Each deck has been covered with facing to prevent displacing of the equipment. The cart can be folded to small dimensions suitcase which can be easy carried by most of the cars. Assembly and disassembly takes only 2 minutes and is incredibly effortless. The wide list of the available accessories allows for a configuration by choice. Technical data Folded cart dimensions: height 150mm / width 630mm / lenght 860mm Assembled cart dimensions: height 980mm / width 630mm / lenght 860mm Weight: 28,5 kg without accessories Capacity: max 150kg Wheels 8″ Pneumatic wheels with two brakes. 9″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 5,35kg and the height by 20mm) 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 6,1kg and the height by 50mm - will not fit inside the folded cart)
AdiCam MINI Cameraman or sound engineer often have to solve a lot of difficulties such as irregular footage area or small, difficult space. The appropriate and stable setup as well as possibility of fast cameras and supplementary equipment movement can really help in the tasks realization.This help is provided by the lightest film cart in our offer – adicam MINI. Adicam MINI weighs barely 28.5 kg and allows to transport the equipment even five times heavier. This model has four hand-folded wheels (8″-fi200 mm) which are equipped with sealed bearings. Swivel wheels have been enriched with breaks which guarantees more stability in difficult conditions. Each deck has been covered with facing to prevent displacing of the equipment. The cart can be folded to small dimensions suitcase which can be easy carried by most of the cars. Assembly and disassembly takes only 2 minutes and is incredibly effortless. The wide list of the available accessories allows for a configuration by choice. Technical data Folded cart dimensions: height 150mm / width 630mm / lenght 860mm Assembled cart dimensions: height 980mm / width 630mm / lenght 860mm Weight: 28,5 kg without accessories Capacity: max 150kg Wheels 8″ Pneumatic wheels with two brakes. 9″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 5,35kg and the height by 20mm) 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 6,1kg and the height by 50mm - will not fit inside the folded cart)
AdiCam MINI Cameraman or sound engineer often have to solve a lot of difficulties such as irregular footage area or small, difficult space. The appropriate and stable setup as well as possibility of fast cameras and supplementary equipment movement can really help in the tasks realization.This help is provided by the lightest film cart in our offer – adicam MINI. Adicam MINI weighs barely 28.5 kg and allows to transport the equipment even five times heavier. This model has four hand-folded wheels (8″-fi200 mm) which are equipped with sealed bearings. Swivel wheels have been enriched with breaks which guarantees more stability in difficult conditions. Each deck has been covered with facing to prevent displacing of the equipment. The cart can be folded to small dimensions suitcase which can be easy carried by most of the cars. Assembly and disassembly takes only 2 minutes and is incredibly effortless. The wide list of the available accessories allows for a configuration by choice. Technical data Folded cart dimensions: height 150mm / width 630mm / lenght 860mm Assembled cart dimensions: height 980mm / width 630mm / lenght 860mm Weight: 28,5 kg without accessories Capacity: max 150kg Wheels 8″ Pneumatic wheels with two brakes. 9″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 5,35kg and the height by 20mm) 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 6,1kg and the height by 50mm - will not fit inside the folded cart)
AdiCam MINI Cameraman or sound engineer often have to solve a lot of difficulties such as irregular footage area or small, difficult space. The appropriate and stable setup as well as possibility of fast cameras and supplementary equipment movement can really help in the tasks realization.This help is provided by the lightest film cart in our offer – adicam MINI. Adicam MINI weighs barely 28.5 kg and allows to transport the equipment even five times heavier. This model has four hand-folded wheels (8″-fi200 mm) which are equipped with sealed bearings. Swivel wheels have been enriched with breaks which guarantees more stability in difficult conditions. Each deck has been covered with facing to prevent displacing of the equipment. The cart can be folded to small dimensions suitcase which can be easy carried by most of the cars. Assembly and disassembly takes only 2 minutes and is incredibly effortless. The wide list of the available accessories allows for a configuration by choice. Technical data Folded cart dimensions: height 150mm / width 630mm / lenght 860mm Assembled cart dimensions: height 980mm / width 630mm / lenght 860mm Weight: 28,5 kg without accessories Capacity: max 150kg Wheels 8″ Pneumatic wheels with two brakes. 9″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 5,35kg and the height by 20mm) 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 6,1kg and the height by 50mm - will not fit inside the folded cart)
AdiCam MINI Cameraman or sound engineer often have to solve a lot of difficulties such as irregular footage area or small, difficult space. The appropriate and stable setup as well as possibility of fast cameras and supplementary equipment movement can really help in the tasks realization.This help is provided by the lightest film cart in our offer – adicam MINI. Adicam MINI weighs barely 28.5 kg and allows to transport the equipment even five times heavier. This model has four hand-folded wheels (8″-fi200 mm) which are equipped with sealed bearings. Swivel wheels have been enriched with breaks which guarantees more stability in difficult conditions. Each deck has been covered with facing to prevent displacing of the equipment. The cart can be folded to small dimensions suitcase which can be easy carried by most of the cars. Assembly and disassembly takes only 2 minutes and is incredibly effortless. The wide list of the available accessories allows for a configuration by choice. Technical data Folded cart dimensions: height 150mm / width 630mm / lenght 860mm Assembled cart dimensions: height 980mm / width 630mm / lenght 860mm Weight: 28,5 kg without accessories Capacity: max 150kg Wheels 8″ Pneumatic wheels with two brakes. 9″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 5,35kg and the height by 20mm) 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 6,1kg and the height by 50mm - will not fit inside the folded cart)
AdiCam MINI Cameraman or sound engineer often have to solve a lot of difficulties such as irregular footage area or small, difficult space. The appropriate and stable setup as well as possibility of fast cameras and supplementary equipment movement can really help in the tasks realization.This help is provided by the lightest film cart in our offer – adicam MINI. Adicam MINI weighs barely 28.5 kg and allows to transport the equipment even five times heavier. This model has four hand-folded wheels (8″-fi200 mm) which are equipped with sealed bearings. Swivel wheels have been enriched with breaks which guarantees more stability in difficult conditions. Each deck has been covered with facing to prevent displacing of the equipment. The cart can be folded to small dimensions suitcase which can be easy carried by most of the cars. Assembly and disassembly takes only 2 minutes and is incredibly effortless. The wide list of the available accessories allows for a configuration by choice. Technical data Folded cart dimensions: height 150mm / width 630mm / lenght 860mm Assembled cart dimensions: height 980mm / width 630mm / lenght 860mm Weight: 28,5 kg without accessories Capacity: max 150kg Wheels 8″ Pneumatic wheels with two brakes. 9″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 5,35kg and the height by 20mm) 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 6,1kg and the height by 50mm - will not fit inside the folded cart)
AdiCam MINI Cameraman or sound engineer often have to solve a lot of difficulties such as irregular footage area or small, difficult space. The appropriate and stable setup as well as possibility of fast cameras and supplementary equipment movement can really help in the tasks realization.This help is provided by the lightest film cart in our offer – adicam MINI. Adicam MINI weighs barely 28.5 kg and allows to transport the equipment even five times heavier. This model has four hand-folded wheels (8″-fi200 mm) which are equipped with sealed bearings. Swivel wheels have been enriched with breaks which guarantees more stability in difficult conditions. Each deck has been covered with facing to prevent displacing of the equipment. The cart can be folded to small dimensions suitcase which can be easy carried by most of the cars. Assembly and disassembly takes only 2 minutes and is incredibly effortless. The wide list of the available accessories allows for a configuration by choice. Technical data Folded cart dimensions: height 150mm / width 630mm / lenght 860mm Assembled cart dimensions: height 980mm / width 630mm / lenght 860mm Weight: 28,5 kg without accessories Capacity: max 150kg Wheels 8″ Pneumatic wheels with two brakes. 9″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 5,35kg and the height by 20mm) 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 6,1kg and the height by 50mm - will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
AdiCam MINI+ adicam MINI+ is the lightest and smallest cart in our offer designed for travelling. Now – upgraded with new great features! The edge of the upper platform of the film cart can be folded down. Opening is extremely fast, all you have to do is just unlock two additional locks, which are located on the side of the shelf. The solution guarantees extension of the working area and even greater comfort of working with a computer or keyboard. 2 Threaded Plates integrated within topshelf. It consists of a mix of 1/4’’ and 3/8’’ threaded holes for photo/video equipment easy to be mount and dismount. The holes on the short sides of the cart have been designed to increase the configuration options and the use of dedicated accessories. Additional reinforcement of the top shelf and high-quality aluminum ensure lightness, durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The MINI+ model has four hand-folded pneumatic wheels (9″- fi225 mm) which are equipped with sealed bearing and standard foot brake system. The two additional wheels make it easier to transport the cart when it is folded. Assembly and disassembly takes only 2 minutes, no tools are needed and the entire cart as well as its individual parts can be folded into an easy to transport case. Reinforced model MINI+ can lift up to 200 kilograms of heavy equipment on your set. Technical data Folded cart dimensions: height 175mm / width 630mm / lenght 860mm Assembled cart dimensions: height 1035mm / width 630mm / lenght 860mm Weight: 37kg without accessories Capacity: max 200kg Wheels 9″ Pneumatic wheels with two brakes. 10″ Pneumatic wheels with two brakes (additional option, the total weight of the cart will increase by 0.75 kg and the height by 30mm – Will not fit inside the folded cart)
adicam STANDARD The adicam STANDARD is a professional camera cart is dedicated to the whole industry of movie. The double-deck model Standard enable to carry an equipment with weight up till 200 kg. Aluminium has been used in the cart production what provided its light weight (38kg) as well as durability and stability. Each deck has been covered with facing to prevent the equipment displacing. The whole cart as well as its particular parts can be easy folded as a little dimension suitcase to be carry in most cars’ spaces and still save more place. Assembly and disassembly take only 1 minute and are incredibly effortless. The Standard model has four hand-folded wheels (fi225 mm) which are equipped with sealed bearings.  Swivel wheels have got a brake, and the two additional wheels make it easier to transport the cart when it is folded. A wide list of available accessories allows free configuration. Dimensions Folded cart dimensions: height 175mm / width 630mm / lenght 1045mmAssembled cart dimensions: height 1025mm / width 630mm / lenght1045mmWeight: 38kg without accessoriesCapacity: max 200kg Accessories Ball mount 75mm/100mm/150mmSteadicam mount systemMonitor mount systemCable accessory crossbar