MID49 Breakout Box and Side Plate Bundle for Blackmagic PYXISSKU: M49-BOB-SPB-BPBreakout Box and Side Plate Bundle for Blackmagic PYXIS includes:Side Plate (Blackmagic PYXIS)A mounting plate that attaches to the side of the camera and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. A marked set of 3/8-16 and 1/4-20 holes are on the sensor axis and the plate is the correct thickness to mount the camera vertically on Baseline 15mm LW (Blackmagic PYXIS) and use 15mm rods at the correct lens heightAudio Breakout AB-9 (Blackmagic PYXIS)A passive adapter that converts the camera's front mini XLR and rear 3.5mm TRS plug into two standard, full-size XLRsInput 1 - balanced audio with phantom power via camera menuInput 2 - unbalanced audio, no phantom power available24 cm cable length with custom low profile mini XLR connector and Neutrik 3.5mm TRS.
MID49 Breakout Boxes and Side Plate Bundle For Canon C400 SKU: M49-BOB-SPB-C4 Breakout Boxes and Side Plate Bundle for Canon C400 includesBreakout Side Plate for Canon C400, which attaches to the ARRI rosette on the side of the camera and provides a 15mm rod clamp for attaching lens motors, a female ARRI rosette for attaching Canon's handgrip, and a breakout box mounting area with 1/4-20's and recessed cable loops for attaching the included breakout boxes AB-10 and EB-10.Audio Breakout AB-10 (Canon C400) is a passive adapter that converts the camera's two mini XLRs using a custom, low-profile connection to two standard, full-size XLRs.DIN Timecode Genlock Breakout EB-10 (Canon C400) converts the DIN 1.0/2.3 connectors using a custom, low-profile connection to standard BNCs for Timecode and Genlock.Also included is a 1/4-20 knurled knob for attaching Canon's microphone shock mount to the top of the breakout panel.
MID49 Breakout Boxes and Side Plate BundleSKU: M49-BOB-SPB-X Breakout Boxes and Side Plate Bundle for RED KOMODO-X includesBreakout Side Plate for RED KOMODO and KOMODO-XAB-1 (RED Komodo-X, V-Raptor, ARRI Alexa Mini)EB-1 (RED Komodo, Komodo-X, V-Raptor)
MID49 Breakout Boxes and Side Plate Bundle for RED V-Raptor SKU: M49-BOB-SPB-VR1 Breakout Boxes and Side Plate Bundle for RED V-Raptor includes: Breakout Side Plate for RED V-Raptor - attaches to the side of the RED V-Raptor and provides 1/4-20, 3/8-16 with ARRI locating pins, an ARRI standard rosette, and M4x20mm threaded holes. Two offset 1/4-20 holes matching RED's spacing allow certain 3rd party products to be attached like GDU Atlas Side Handle (Raptor, Right) AB-1 (RED V-Raptor) - A passive adapter that converts the camera's 5-pin 00 LEMO to two standard, full-size XLRs and attaches by a captive 1/4-20 screw and rubber pad. EB-1 (RED Komodo, Komodo-X, V-Raptor) - An EXT port converter that provides industry-standard connectors: Genlock: 75-ohm BNCTimecode: 5-pin 0BCTRL: 4-pin 00Trigger: 3-pin FischerEXT Pass-Through: 9-pin 0B
MID49 EXT Breakout EB-1 SKU: M49-BOB-EB1 EXT Breakout EB-1 (RED Komodo, Komodo-X, V-Raptor) converts the camera's 9-pin 0B LEMO EXT port to industry standard connectors listed below. Genlock: 75-ohm BNCTimecode: 5-pin 0BCTRL: 4-pin 00Trigger: 3-pin FischerEXT Pass-Through: 9-pin 0B Attaches by a captive 1/4-20 screw and rubber pad to the camera body or side plates like Breakout Side Plate Only (RED Komodo-X)(sold separately). Two M4 threaded holes in 20mm ARRI spacing are available to add Breakout Box Mounting Bracket (ARRI 3/8-16, Rear Mount) (sold separately), which allows the EB-1 to attach using a 3/8-16 screw with ARRI locating pins. 8 inch (20cm) cable length with right angle LEMO-compatible connector. Weight: 70gDimensions (WxLxH): 54 x 271 x 19mm