Wooden Camera D-Box System (FUJIFILM GFX ETERNA 55) V-Mount

Wooden Camera D-Box for FUJIFILM GFX ETERNA 55The D-Box™ plays a critical role in the camera's power system by acting as both a power distribution hub and a hot swap for other powered accessories. Its primary function is to supply power to the camera to ensure continuous operation throughout filming. In addition, it distributes power to other connected accessories, serving as the central power management point for the entire camera setup. The D-Box has two P-Tap ports, a DC-IN port for power supplies and hot swapping, an EXT port to distribute power and trigger communication, and a Remote Port that translates trigger information into the D-Box.The DC-IN port allows hot-swapping of the on-board battery without powering down the camera or attached accessories with a green LED indicator confirming that the port is active. The 5-Pin EXT port distributes trigger signals and power to the Power Strip (sold separately). The D-Box also features an eject button for quick battery swaps and a blue LED indicator that lights up when power is drawn from that source.The D-Box has a built-in electronic fuse that prevents overcurrent to accessories, allowing uninterrupted power to the camera. A red LED indicator illuminates if the electronic fuse is triggered. For camera control, the D-Box includes a Remote Port that accepts a TRS cable, which carries Run/Stop signals from the camera to the D-Box and then passes them through the 5-Pin EXT port to the Power Strip. Finally, the D-Box is designed with two screw-in points on its underside, allowing for direct attachment of our support bracket for secure and stable integration into the camera rig using our Riser Plate. Note: Remote port on DBox for future FUJIFILM ETERNA GFX 55 Firmware UpdateSpecificationsWeightGold Mount: 293.3 gV-Mount: 277.6 gDimensionsGold Mount: 74 x 47.5 x 99.4 mmV-Mount: 78.3 x 39 x 105.2 mm

Wooden Camera D-Box for FUJIFILM GFX ETERNA 55The D-Box™ plays a critical role in the camera's power system by acting as both a power distribution hub and a hot swap for other powered accessories. Its primary function is to supply power to the camera to ensure continuous operation throughout filming. In addition, it distributes power to other connected accessories, serving as the central power management point for the entire camera setup. The D-Box has two P-Tap ports, a DC-IN port for power supplies and hot swapping, an EXT port to distribute power and trigger communication, and a Remote Port that translates trigger information into the D-Box.The DC-IN port allows hot-swapping of the on-board battery without powering down the camera or attached accessories with a green LED indicator confirming that the port is active. The 5-Pin EXT port distributes trigger signals and power to the Power Strip (sold separately). The D-Box also features an eject button for quick battery swaps and a blue LED indicator that lights up when power is drawn from that source.The D-Box has a built-in electronic fuse that prevents overcurrent to accessories, allowing uninterrupted power to the camera. A red LED indicator illuminates if the electronic fuse is triggered. For camera control, the D-Box includes a Remote Port that accepts a TRS cable, which carries Run/Stop signals from the camera to the D-Box and then passes them through the 5-Pin EXT port to the Power Strip. Finally, the D-Box is designed with two screw-in points on its underside, allowing for direct attachment of our support bracket for secure and stable integration into the camera rig using our Riser Plate. Note: Remote port on DBox for future FUJIFILM ETERNA GFX 55 Firmware UpdateSpecificationsWeightGold Mount: 293.3 gV-Mount: 277.6 gDimensionsGold Mount: 74 x 47.5 x 99.4 mmV-Mount: 78.3 x 39 x 105.2 mm

MID49 Power Distribution Box DB-13 (FUJIFILM GFX ETERNA 55, V-Mount)SKU: M49-DB13-V Power Distribution Box DB-13 (FUJIFILM GFX ETERNA 55, V-Mount) attaches directly to the back of the camera body using the V-Mount interface to provide intelligent power distribution with D-Taps, 5V USB-C PD, 3pin Fischers, and 2pin LEMO compatible connectors. Removable LANC cable enables remote start/stop capability using 3pin Fischer devices. Hot swap between onboard battery and 4pin XLR DC INPUT without losing camera or accessory power. When both sources are connected, the DC INPUT takes priority down to 12.5V at which point, the DB-13 will switch to an onboard battery.With the SMART FUSE design, camera power is monitored, and the remaining power budget is allocated to accessories. For example, the ETERNA uses approximately 2.0A at 14V so when using a 10A capable battery, the remaining 8.0A is allocated for accessory use. If an accessory configuration exceeds the 8.0 limit, accessory power is cut off, leaving the camera powered.The "SMART FUSE" LED will illuminate showing the error and once the configuration has been adjusted to lower than 8.0A, the RESET button can be pressed and power will be re-enabled to accessory outputs. In the event of a complete short circuit, the system will immediately shut down and can only be turned back on once the short circuit has been removed.INPUTSBATT: V-Mount plate with SMBus communicationDC IN: 4pin XLR (11-17V)OUTPUTS2x D-Tap (battery voltage)2x 3pin (24V at 2.5A with run/stop) 2x 2pin (battery voltage) 1x USB-C PD (5V at 3A with thread lock)