Pay with:
We ship with:
Fast shipping
Buy VAT exempt with your valid VAT EU ID
Purchase comfortable on account
Showroom in Warsaw +48 299 06 61

Tilta Hydra Predator Shock Absorbing Arm

Tilta Hydra Predator

The Hydra Predator Shock Absorbing Arm is a more flexible package for car mounting camera and gimbal systems via speed rail while also including additional accessories to offer more accurate control and improved ease of use for the DJI RS2 and RS3 Pro. The Hydra Predator Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography. This Kit is based around the new Predator Rail Mounting Attachment which allows you to secure the arm of the Hydra Alien to any 2 inch speed rail like the ones found in our Speed Rail Mounting Kit. This offers greater flexibility for vehicle mounting as you are able to better rig a vehicle to your specific needs and will be able to mount the system to structures where 2 inch rails are already present. 
The system uses a shock absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down. The included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal. This Kit features the Remote Control Kit which offers full wired or wireless control of the DJI RS2 or RS3 Pro and includes the Hydra Alien Monitor Bracket which makes it easier to monitor and control the Ronin. Most importantly, the controller features a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating.
The new Predator Hard Shell Safety Case is designed to store and protect the Hydra Predator system while remaining lightweight and compact. This allows you to safely transport the system between shooting locations and neatly store the system when it is not in use. The waterproof design protects the case and equipment from hazards like rain and snow.

In the box

  • 1 x Hydra Alien Rail Mounting Attachment (HDA-T05-RMA)
  • 1 x Hydra Alien Shock Absorbing Arm(HDA-T02-SAA)
  • 1 x Power Supply Base Plate for RS 2(TGA-PBP)
  • 1 x Remote Control Receiver Module for RS 2(TGA-RCR)
  • 1 x Remote Control Handle for RS 2/Ronin S(TGA-RCH)
  • 1 x 16-Pin Lemo to 6-Pin Lemo Cable(500 cm)(TCB-6LE-6LE-500)
  • 1 x Hydra Dual Battery Plate Cradle Head – GOLD-Mount(HDA-BCH-AB)
  • 2 x Hydra Alien GOLD-Mount Battery Plate(HDA-T02-BP-AB)
  • 1 x Hydra Alien 90 Degree Adapter for Shock Absorbing Head(HDA-T02-ASA)
  • 1 x Hydra Alien Shock Absorbing Head(HDA-T02-SAH)
  • 1 x Hydra Alien Dual Battery Plate Support Bracket(HDA-T02-DPS)
  • 8 x 220g Counterweight (TGA-CW-220)
  • 1 x Hydra Alien Cable Clamp Suction Cup(HDA-T02-CSC) (10pcs/set)
  • 1 x Hydra Alien Monitor Bracket(HDA-T02-MB)
  • 1 x Tool Kit for Hydra Predator Shock Absorbing Arm(HDA-T05-TK)
  • 1 x Hydra Predator Shock Absorbing Arm Hard Shell Waterproof Safety Case(HDA-T05-WSC)
Related links of the manufacturer

Accessory Items

Free shipping
TILTA Hydra Alien Car Mounting System Pro Kit
Battary Mount: V-Mount
TILTA Hydra Alien PRO KIT The Hydra Alien Pro Kit offers a complete package for flexible car mounting while including additional accessories to offer more accurate control and improved ease of use. The Pro Kit features the Remote Control Kit which offers full wired or wireless control of the DJI RS 2 and includes the Hydra Alien Monitor Bracket which makes it easier to monitor your footage while controlling the RS 2. The Hydra Alien Car Mounting System was designed from the ground up to work in conjunction with smaller gimbals to allow for a lightweight solution to car-mounted cinematography. The system utilizes a highly customizable combination of dovetail-like plates and suction cups that can support a payload of 50kg each. Highly elastic shock-absorbing silicon provides longer durability and less abrasion, while the updated suction cup plungers create a stronger seal for improved security in colder weather. When interconnected, the system allows users to fine-tune the exact placement of their shot to achieve almost any angle possible when mounting to a vehicle. The system also uses a shock absorbing arm to better stabilize the camera for certain shots as well as a spring-loaded cradle head if the intended shot requires that the gimbal be flipped upside down. The newly included Hydraulic Dampening Pole further stabilizes the arm to provide smoother results when driving conditions are less than optimal. The Hydra Alien supports full wireless control of the RS2 via the included Remote Control Kit for RS2 which allows you to control your RS 2 gimbal’s settings as well as the record and photo functions of your camera via either a wired or wireless connection. It also includes a thumbstick that allows you to control the pan and tilt of your gimbal for maximum precision while operating. The new Hard Shell Safety Case is designed to store and protect the Hydra Alien. This allows you to safely transport the system between shooting locations and neatly store the system when it is not in use. The waterproof design protects the case and equipment from hazards like rain and snow. This case functions as a replacement for the one included with the Hydra Alien, but can also be used to store other equipment if needed.

PLN 9,852.30*
net: PLN 8,010.00
RigWheels Cloud Mount Standard
RigWheels Cloud Mount Standard SKU: CM-FSThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available. Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle. This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key

PLN 6,294.53*
net: PLN 5,117.50
Free shipping
RigWheels Cloud Mount Standard + CASE
RigWheels Cloud Mount Standard + CASE SKU: CM-ST-CThe RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount Full Size adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x HARD CASE

PLN 8,752.13*
net: PLN 7,115.55
Free shipping
RigWheels Cloud Mount PRO
RigWheels Cloud Mount PRO SKU: CM-P The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on Rigwheels RigMount XL mounting platform, the RigWheels Cloud Mount PRO adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the Rigwheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer16 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup8 x C-Cup Suction Cup4 x 5/16″ x 1″ Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key1 x Sidecar Tray

PLN 10,947.00*
net: PLN 8,900.00
RigWheels Cloud Mount DSLR
RigWheels Cloud Mount DSLR SKU: CM-DS The RigWheels Cloud Mount camera vibration isolator system is the most versatile and customizable vibration isolation system for filmmaking available.Building on RigMount XL mounting platform, the RigWheels Cloud Mount DSLR adds a vibration isolator to allow your handheld gimbal to work more effectively and with less strain on its motors and bearings. In the same way that Handheld Gimbal Stabilizers have drastically reduced the time required to achieve smooth dynamic camera movement, the RigWheels Cloud Mount tremendously reduces the amount of time necessary and the complexity involved with mounting a vibration isolator system to a vehicle.This is a all-in-one solution and usually requires no additional grip and rigging hardware. Other vibration isolator systems rely extensively on  third party rigging and hardware which drastically increases the cost of a working system. The Cloud Mount can be deployed to its standard configuration and ready for your gimbal in under one minute. With a small reconfiguration you can change to a ‘hostess tray” or “underslung” position. Cloud Mount DSLR - In the box 2 x RigPlate4 x RigAxle10 x Cloud Mount Vibration Isolator Cable Clamp8 x Cable (1/4″ x 7″)18 x Socket Button Head (1/4″ x .5)8 x RigMount Magnetic Mount Long8 x A-Cup Suction Cup1 x 3/8″ Bolt – 3/4″ Long1 x 3/8″ Washer4 x 5/16″ x 1″ – Thumb Knob1 x 3/16″ Hex Key1 x 5/32″ Hex Key

PLN 5,473.50*
net: PLN 4,450.00
Pay with:
We ship with: