8Sinn HDMI & USB C Cable Clamp for 8Sinn Cage for Canon EOS R5C SKU: 8-HDMICC-8-CR5C C The presented HDMI & USB C Cable Clamp is dedicated specifically for the 8Sinn Cage for Canon EOS R5C. Its shape is perfectly fitted to the cable input on the camera so that it does not interfere with the camera’s functions. After the cable is plugged into the camera, the clamps are adjusted to the size of the camera with two M4 screws, which prevents the cable from accidental detachment. The HDMI & USB C Cable Clamp is attached to the 8Sinn Cage for Canon EOS R5C with two 1/4" screws. Dimensions: Height: 65 mm, Length: 12,8 mm, Width: 25 mm; Weight: 17g Key features Adjustable 3-piece clamp Aluminum made
8Sinn HDMI cable clamp CH2 for Cages SKU: 8-HDMICC-CH2 HDMI protective cable clamp has been designed to be attached to the cage. It prevents the cable from being accidentally disconnected. Keeps the HDMI cable in place while protecting the plug and port from being damaged. Carefully designed around the ports compartment. Silver parts of the clamp are movable, which allow adjusting the clamp opening to the size of the cable`s plug. Material: air aluminumCompatibility: 8Sinn Sony a7III / a7RIII Cage; 8SINN CAGE FOR SONY A7SIIIDimensions: Height: 29mm, Length: 28mm, Width: 10mm; Weight: 15g
8Sinn HDMI Cable Clamp for 8Sinn Cage for Canon C70 SKU: 8-HDMICC-CC70 C HDMI protective clamp for the Canon C70 includes the two-parted main clamp, responsible for keeping the plug of your cable in place and the mounting bracket the user has to attach at the bottom of the cage and then attache the main clamp to it. Most importantly, the product prevents your cable from being accidentally disconnected. It also keeps the HDMI cable in place while protecting the plug and port from being damaged. Carefully designed around the ports compartment. The silver part of the main clamp is adjustable to the cable’s plus size.
MID49 UltraSync ONE Clamp (Atomos, Timecode Systems)SKU: M49-CAG-USOCUltraSync ONE Clamp attaches the Atomos / Timecode Systems UltraSync ONE to an ARRI 1/4-20 with locating pins adjacent using a captive thumbscrew. The clamp can be configured in several ways depending on the desired position.Weight: 40gDimensions (WxLxH): 60.2 x 22.3 x 14 mm
MID49 Universal ARCA ClampSKU: M49-ATM-UNIUniversal ARCA Clamp attaches to tripod plates using 1/4-20 and 3/8-16 threaded holes on the bottom. It can also be bolted down to cameras, cheeseplates, or other devices using 4 included 1/4-20 x 1/2 socket button head screws. Front-to-back 1/4-20 screw channels accommodate spacing up to 30mm apart center-to-center. Side-to-side 1/4-20 screw channels accommodate spacing up to 60mm apart center-to-center.
SHAPE Shifter 3" Clamp End/Center Jaw SKU: CDJAW Introducing our 3-inch clamp with a unique design offering both center and end jaw configurations. Made of solid steel, it features a special anti-slip material with the vulcanization rubber process, inside the clamp for secure gripping on various surfaces. Equipped with a 5/8-inch anti-rotating baby pin, lockable at both ends, providing stability in any setup. With both end and center jaw configurations, this clamp offers four setups in one, allowing for endless rigging options. The inclusion of a drive screw for the lower jaw eliminates the need for additional tools when unclamping. Versatile and strong, it grips square, round, or rectangular tubing, as well as other common and irregular shapes. Experience convenience and flexibility with our multifunctional clamp. Key Features3’’ clamp offering both Center & End jaw configurationsSpecial anti-slip material inside clamp (Vulcanization rubber process)5/8’’ anti-rotating baby pin capable of being locked at both endsEnd & Center jaw configurationsFour configurations in oneDrive screw for lower jawNo more tools needed to unclamp lower jawClamps and spreads, providing for endless rigging optionsProvides strong gripping for square, round or rectangular tubing, and many other common & irregular shapesJaw width: 76.2mmShaft length: 89mmLength of baby pin: 76.2mmThread on end of shaft: 1/4-20Additional 5/8’’ baby pin available in option
Wooden Camera Dovetail Clamp SKU: 156700 Wooden Camera Dovetail Clamp adapts any camera system, baseplate, or accessory to an ARRI standard dovetail. Great for use with our Quick Bases, Universal Baseplate, and Easy Riser systems. Dovetail Clamp features 2 x 3/8-16 low profile screws2 x 1/4-20 low profile screwsWeight 2.72 kgDimensions 10.16 cm x 11.43 cm x 1.91 cm
Wooden Camera NATO Clamp SKU: 148700 Quick release clamp for Safety NATOs. Wooden Camera NATO Clamp great for attaching monitors, handles, and more. Weight 45.36 gDimensions 5.84 cm x 5.59 cm x 17.78 cm
Wooden Camera NATO Lock (Clamp Only) SKU: 199000 NATO Lock Kit (Clamp Only) is the quick release clamp portion of the NATO Lock Kit which is based on NATO standards. The clamp portion of the kit can bolt into a 1/4-20 or 3/8-16 hole using the included screws and it is also threaded for 1/4-20 and 3/8-16 so accessories can screw into it. Compatible with RED Swat Rails, Zacuto Z-Rails, and many 3rd party NATO products.
Wooden Camera NATO Lock Kit SKU: 198300 NATO Lock Kit is a quick release set based on a NATO standard rail. The rail portion can bolt into a 1/4-20 or 3/8-16 hole using the included screws. Set screw can also be installed to prevent twisting. The rail is also threaded for 1/4-20 and 3/8-16 so accessories can screw into it. The clamp portion of the kit can also bolt into a 1/4-20 or 3/8-16 hole using the included screws and it is also threaded for 1/4-20 and 3/8-16 so accessories can screw into. Wooden Camera NATO Lock Kit compatible with RED Swat Rails, Zacuto Z-Rails, and many 3rd party NATO products. Weight 50 gDimensions 47.2 mm x 47.2 mm x 18.3 mm