RigWheels 100mm Ball Adapter SKU: ba100 Use this tripod head bowl adapters to mount a half-bowl style tripod head on a flat surface. RigWheels Ball Adapters are custom machined aluminum, anodized black and sized for use with Righweels RigPlate and other flat surfaces. Unlike some other bowl adapters, this 100mm bowl adapter has a true curved bowl interior giving you the most surface area contact with your tripod head. This RigWheels 100mm Ball Adapter can be used with our RigPlate as well as with any other flat mounting surface that you may want to mount your tripod head to.
RigWheels 100mm Ball Head Adapter Pro SKU: CBA100 Weight: 0.45 kgDimensions: 12.7 cm x 12.7 cm x 7.62 cm
RigWheels 75mm Ball Adapter SKU: BA75 Use this tripod head bowl adapter to mount a half-bowl style tripod head on a flat surface. RigWheels Ball Adapters are custom machined aluminum, anodized black and sized for use with Rigwheels RigPlate and other flat surfaces. Unlike some other bowl adapters, this 75mm Ball Adapter has a true curved bowl interior giving you the most surface area contact with your tripod head. This RigWheels 75mm Ball Adapter can be used with our RigPlate as well as with any other flat mounting surface that you may want to mount your tripod head to.
RigWheels 75mm Ball Head Adapter Pro SKU: CBA75 Weight: 0.45 kgDimensions: 12.7 cm x 12.7 cm x 7.62 cm
RigWheels A-Cup Suction Cup SKU: AC04 A-Cups are industrial grade camera suction mounts with industry standard 1/4-20″ studs that screw directly into the RigPlate or RigAxles. The Riwgheels A-Cups are appropriate for most applications.
RigWheels B-Cup Suction Cup SKU: BC04 Rigwheels B-Cups are industrial grade car suction mounts with 5/16″ studs that mount in the outer most holes of the RigPlate. You will notice 3 different versions of suction cups that RigWheels offers. The B-Cups have more holding power in a straight pull but the main reason to offer the B version is that they have less flex so the overall mount is a bit more solid. The trade off is that they also are more easily removed so if the mount is going to be subject to a lot of outside forces (wind, water, etc…) than the A or C version is recommended.Set inlcludes 4 x CUPS
RigWheels C-Cup Suction Cup SKU: CC01Rigwheels C-Cups are vacuum action suction mounting cups ideal for the most serious of jobs and placement. This type of vacuum suction cup is one of the most secure and safe options you can use to mount a camera due to the vacuum mechanism maintaining negative pressure inside the cup when in use. There is also a red line that becomes visible when the strength of suction gets low. With 4 of these vacuum suction mounts connected to a RigPlate, this configuration is one of the strongest and most secure suction mounting platforms on the market.The A-Cups are appropriate for most applications. The B-Cups have more holding power in a straight pull but the main reason to offer the B version is that they have less flex so the overall mount is a bit more solid. The trade off is that they also are more easily removed so if the mount is going to be subject to a lot of outside forces (wind, water, etc…) than the A or C version is recommended. The C-Cups are for the most serious of jobs with a vacuum pump mechanism to keep the suction cup securely affixed to a surface with a visual safety indicator.
RigWheels Car Strap & Safety Kit SKU: SK01 This is a great little kit for securing and stabilizing your camera when car mounting as well as other applications. The CineRopes are incredibly useful for all sorts of on-location purposes like securing silks, adding ballast to light-stands, tying down your gear cart etc.Car Strap & Safety Kit incudes 4 x Hood Hook4 x CineRope
RigWheels CineRope SKU: CR01 CineRopes are an incredibly useful tool for all sorts of on-location purposes like securing silks, adding ballast to light-stands, tying down your gear cart etc… You’ll find yourself using them on a very regular basis. All attaching points are rubber coated.
RigWheels D-Cup 6″ Vacuum Suction Cup SKU: DC01 Industry standard 6″ vacuum suction cup with visual indicator for added safety. 3/8-16″ Stud
RigWheels E-Cup 10″ Suction Cup SKU: EC10Sometimes you just need really big suction cups to do heavy lifting. The E-Cup 10″ suction cup comes with a set of 3″ stand offs and a RigPlate mounting platform attached.
RigWheels GoPro 1/4-20″ Adapter SKU: GPA1 Adapter to mount your GoPro onto a 1/4-20″ screw
RigWheels Hood Hook SKU: HH01 Hood Hooks are a great tool for securing and mounting cameras and other gear to the exterior of cars. They are designed to hook to the edges of body panels and provide you with a solid/fixed connection to your car. The hook and d-ring components are of course rubber coated to protect your car.
RigWheels Jam Straps Car Mounting Anchor Point SKU: JS02 Rigwheels Jam Straps are one of the quickest and simplest ways to add anchor points to your vehicles body panels. Simply place the strap in-between where two body panels join and the soft rubber hose will create a sturdy anchor where you can connect straps and hooks for safety and stability when mounting cameras and other production equipment
RigWheels Mitchell Adapter Plate With this adapter plate you can use Mitchell tripod heads on any of our systems that use either the RigPlate or RigPlate Pro. There are many different varieties of tie-down knobs for Mitchell heads so compatibility with RigPlate or RigPlate Pro will vary depending on the specific head and tie-down method. For example, if the head uses a “castle nut” you would need to use the Mitchell Adapter Plate in conjunction with the RigPlate Pro so the castle nut goes through the plate or, use a standard RigPlate with 3″ or 6″ risers.
RigWheels Movi Mounting Adapter Plate SKU: MAMP Adapter plate for Freefly Systems Movi gimbal stabilizers
RigWheels PT-Zero 75mm Tripod AdapterSKU: PT-Z-HB75This 75mm half-ball adapter allows you to mount the PT-Zero Upright isolator directly to the bowl of a 75mm tripod without the need for a tripod. This is more solid with simpler rigging. This same adapter can also be used to mount PTZ cameras and other production devices directly to a tripod.
RigWheels PT-Zero Extended Wall Mounting BracketSKU: PT-Z-WB8The PT-Zero Extended Wall Mounting Bracket provides approximately 22,86 cm of clearance behind the camera for cabling or line-of-sight purposes. This bracket can also be used to mount the “upright” or camera-on-top isolator to a wall or pipe. (pipe clamps sold separately). The plate that attaches to the wall is flush mount and does not have any screws/bolts protruding.
RigWheels PT-Zero Light Stand MountSKU: PT-Z-SAThis is RigWheels general-purpose baby/junior light stand adapter. it can fit onto the top of a 5/8″ baby pin or into a 1-1/8″ Junior receiver. The adapter attaches via 3/8-16″ female thread.We do not recommend mounting a PTZ camera on a baby pin.
RigWheels PT-Zero Pipe ClampsSKU: PT-Z-PC022 pieces of RigWheels universal pipe clamps. These connect via 3/8″ bolts going through the mounting plate.
RigWheels PT-Zero Wall Mounting BracketSKU: PT-Z-WB4The PT-Zero Wall Mounting Bracket provides approximately 12,7cm of clearance behind the camera for cabling/clearance purposes. The plate that attaches to the wall is flush mount and does not have any screws/bolts protruding. Our pipe clamps can be added when necessary.
RigWheels RigMount 100 Heavy Duty Magnetic Camera Mount SKU: RM100 The RigWheels RigMount 100 was developed during real world productions to fulfill the need of permanently mounting cameras to windshields / glass. You would not normally think of using magnets to mount cameras to anything other than metal but as it turns out, they work amazingly well for all sorts of applications. The designs for this part were sitting on our shelf for a couple years and it wasn’t until a recent production requirement presented itself that we decided to move forward with production.
RigWheels RigMount Magnetic Mount Long SKU: RML1 The RigMount is a magnetic mount for camera mounting that uses rare earth magnets to achieve its surprisingly high holding power. This version has a longer mounting bolt sized for use with the RigPlate to give the correct amount of clearance underneath the Plate. It has a a specially formulated rubber coating to both protect the surface you mount to and also to prevent slippage. The great thing about mounting a camera with a RigMount magnetic mount is that once it is safely attached to a steel surface it will never loose it’s holding power. This gives you peace of mind and better results as well. With industrial grade high-power rare-earth magnets these magnetic mounts will amaze you with their strength when affixed to a compatible metal. (up to 50lbs each in a vertical pull) Many other mounting devices can sag or detach as time passes. When you mount your camera with a RigMount you can be confident that your frame will stay exactly where you want it. Suction mounts are prone to vibration because of the rubber components. Because this magnet mount uses less rubber material than suction mounts your shots will be more stable with less vibration. The rubber coating on the RigMount magnetic mounts is just enough to protect the surface you are mounting to from being scratched while not depleting the strength of the magnet. Another advantage to using RigMounts is they are not affected by temperature. If you shoot in extreme environments these magnetic mounts are an ideal option.
RigWheels RigMount Magnetic Mount Short SKU: RMS1 The RigMount is a magnetic camera car mount that uses rare earth magnets to achieve its surprisingly high holding power. (up to 35lbs in a vertical pull) This version has a shorter mounting bolt on top sized specifically for use with cameras and small ball heads. It has a a specially formulated rubber coating to both protect the surface you mount to and also to prevent slippage. The great thing about mounting a camera with a RigMount magnetic camera car mount is that once it is safely attached to a steel surface it will never loose it’s holding power. This gives you peace of mind and better results as well. Many other mounting devices can sag or detach. When you mount with a RigMount camera car mount you can be confident that your frame will stay exactly where you want it. Suction mounts are prone to vibration because of the rubber components. Because this magnetic camera car mount uses a durable rubber material that is just thick enough to protect the surface you’re mounting to, your shots will be more stable and have less vibration than when using most common suction methods. Since the RigMount has a flat base it can also be used to place and position your camera as an ordinary mini-tripod. For point-and-shoot cameras the RigMount makes a great travel tripod because of it’s versatility and all of the different ways in which you can place it. One of the difficulties with most miniature tripods is that it can often be difficult to find a platform to put it on in order to get the camera to the correct height. The RigMount handles this frustration nicely with its ability to attach to steel surfaces ( street signs, cars, mail boxes, railings, etc….)