AVMATRIX Wireless Multi-Camera Tally Light System Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with 4/6/8 tally lamps. The system can wirelessly communicate from up to 200m away. Multiple interface connections on the tally box—from GPIO and USB Type-C to RS-232 and RS-485—create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal. Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories. Features Support 433Mhz wireless or wired tally connectionUp to 200m wireless connection distance (line-of-sight)The tally box with multiple interfaces including GPIO/USB/RS-485/RS-232GPIO compatible with AVMATRIX and other video switchersCompatible with VMix via USB type-cWireless PTZ camera control via RS-232/RS-485 pass-through Up to 16 tally lamps can be supportedBoth front and rear indicators on the lamps with 4-level adjustable brightnessVisible signal strength and battery status on the tally lampThe Tally lamp can be powered by USB type-c or 18650 Li-ion battery1/4 inch hot shoe for tally lamp installation Tally Box GPIO, USB Type-C, RS-485, and RS-232 interface1-pin antenna inputGPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxesPTZ remote control via RS-232/RS-485 pass-through USB Type-C input compatible with vMix softwareCan support up to 16 tally lamps Tally Lamp PTZ camera connection via RS-485 inputFront and rear indicators with four-level brightness adjustmentSignal strength and battery status indicatorsPowered via USB Type-C input or with separately available 18650 lithium-ion battery1/4"-20 thread for installation of hot shoe
AVMATRIX Wireless Multi-Camera Tally Light System Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with 4/6/8 tally lamps. The system can wirelessly communicate from up to 200m away. Multiple interface connections on the tally box—from GPIO and USB Type-C to RS-232 and RS-485—create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal. Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories. Features Support 433Mhz wireless or wired tally connectionUp to 200m wireless connection distance (line-of-sight)The tally box with multiple interfaces including GPIO/USB/RS-485/RS-232GPIO compatible with AVMATRIX and other video switchersCompatible with VMix via USB type-cWireless PTZ camera control via RS-232/RS-485 pass-through Up to 16 tally lamps can be supportedBoth front and rear indicators on the lamps with 4-level adjustable brightnessVisible signal strength and battery status on the tally lampThe Tally lamp can be powered by USB type-c or 18650 Li-ion battery1/4 inch hot shoe for tally lamp installation Tally Box GPIO, USB Type-C, RS-485, and RS-232 interface1-pin antenna inputGPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxesPTZ remote control via RS-232/RS-485 pass-through USB Type-C input compatible with vMix softwareCan support up to 16 tally lamps Tally Lamp PTZ camera connection via RS-485 inputFront and rear indicators with four-level brightness adjustmentSignal strength and battery status indicatorsPowered via USB Type-C input or with separately available 18650 lithium-ion battery1/4"-20 thread for installation of hot shoe
AVMATRIX Wireless Multi-Camera Tally Light System Display the on-air status of each camera in your set configuration with the AVMATRIX Wireless Multi-Camera Tally Light System with 4/6/8 tally lamps. The system can wirelessly communicate from up to 200m away. Multiple interface connections on the tally box—from GPIO and USB Type-C to RS-232 and RS-485—create wide compatibility with various switchers and vMix software for integration with your preexisting gear setup. An included antenna can attach to the box to improve its signal. Each tally light has a front and rear indicator light for its on-air status, as well as indicators to display the wireless signal strength and battery level. They can be powered via USB Type-C input or with a separately available 18650 lithium-ion battery. The bottom of each lamp has a 1/4"-20 thread for installation with a hot shoe to the top of a camera. Five USB Type-C cords, a GPIO connector, a power adapter, and a carrying case complete the system's accessories. Features Support 433Mhz wireless or wired tally connectionUp to 200m wireless connection distance (line-of-sight)The tally box with multiple interfaces including GPIO/USB/RS-485/RS-232GPIO compatible with AVMATRIX and other video switchersCompatible with VMix via USB type-cWireless PTZ camera control via RS-232/RS-485 pass-through Up to 16 tally lamps can be supportedBoth front and rear indicators on the lamps with 4-level adjustable brightnessVisible signal strength and battery status on the tally lampThe Tally lamp can be powered by USB type-c or 18650 Li-ion battery1/4 inch hot shoe for tally lamp installation Tally Box GPIO, USB Type-C, RS-485, and RS-232 interface1-pin antenna inputGPIO compatible with AVMATRIX, Roland, Sony, NewTek, Panasonic, Datavideo, or other tally converter boxesPTZ remote control via RS-232/RS-485 pass-through USB Type-C input compatible with vMix softwareCan support up to 16 tally lamps Tally Lamp PTZ camera connection via RS-485 inputFront and rear indicators with four-level brightness adjustmentSignal strength and battery status indicatorsPowered via USB Type-C input or with separately available 18650 lithium-ion battery1/4"-20 thread for installation of hot shoe
Blackmagic GPI and Tally Interface SKU: SWTALGPI8 Add tally to your ATEM switcher with Blackmagic Design's GPI and Tally Interface! With 8 contact closure tally outputs, you can send a tally signal to your cameras, replay machines and monitors so everyone knows which camera is 'on-air'! If you need more tally outputs, simply connect multiple GPI and Tally Interfaces together because it connects via Ethernet to your ATEM production switcher.
Hollyland Wireless Tally System Wireless Tally System is a highly compatible Tally device with multiple ports and a powerful sequence learning function. With its long battery life and over 800m transmission range, it provides a stable and prolonged shooting experience. The system utilizes adaptive frequency hopping technology and supports up to 16 Tally channels, significantly enhancing work efficiency. Hollyland Wireless Tally System offers multiple port options, including DB25, RJ45, and USB-C, to support the connection to various switchers incl. solutions from Blackmagic Design, Panasonic, Datavideo, Sony, Roland, vMix, and DeviceWell. A single battery provides a life of over 8 hours, surpassing the working duration requirements for most usage scenarios. Even if the Tally device runs low on battery during operation, you can immediately replace it to ensure uninterrupted usage. Extremely lightweight, the Tally lights only weigh 98.5g (with battery)! Set of 4 lights 4x Tally Light1x Tally Station1x Tally Hard-Shell Case2x DC Power Adapter2x Wireless Tally System Antenna1x 8-slot Charging Base4x Li-ion Battery Pack 7001x USB-A to USB-C Cable1x Number Stickers Set of 8 lights 8x Tally Light1x Tally Station1x Tally Hard-Shell Case2x DC Power Adapter2x Wireless Tally System Antenna1x 8-slot Charging Base8x Li-ion Battery Pack 7001x USB-A to USB-C Cable1x Number Stickers
Kiloview NDI External Tally LightNDI external tally is a particular auxiliary device for video director, making it easy for photographers, hosts, studios and other production personnel to give accurate tips on site. With our tally module, you can easily check camera live status (program status).Small and light-weight, compatible with full ranges of NDI products, including E1 NDI, E2 NDI, N1, and N2Free adjustment and stable signalPortable and Flexible InstallationConnect the device via the USB cable and easily control Tally. Height and position are adjustable at willEasily installed on the camera and equipped with front and rear lights for cameraman and the host in a fast response
Middle Things Middle Tally The Middle Tally is the world's smallest tally system. The tiny form factor is so lightweight & compact that you can velcro it to almost any part of your camera setup. Since the Middle Tally system uses a regular USB-C to USB-C cable system, you can use the included 50cm (1.6 feet) cable or pick any USB 3.2 cable that has the exact length you want! There is no built-in battery, it is powered and controlled directly by the APC-R it is connected to. Once you have your APC-R set up and running, with the Middle Control software connected to your Blackmagic Design ATEM, just connect the Tally to the APC-R AUX USB-C port, and boom! You're ready to go.The Middle Tally will automatically light up in Red when the corresponding APC-R is on On Air, and Green when the corresponding APC-R is on preview. The Middle Tally requires an APC-R, it cannot be used as a standalone device. In the Box 1x Middle Tally Unit1x 50cm USB-C to USB-C Cable1x Velcro Strap