AJA FiberLC-1RX-12G1-Channel LC Single Mode 12G Fiber Receiver SFP (FS4,FS-HDR)FS-HDR's SFP options include both 12G/6G-SDI HD-BNC and Fiber LC I/O options including single or dual channel and Single Mode or Multi-Mode options, allowing great SDI flexibility and fiber cable runs of up to 10 kilometers to be connected directly to the FS-HDR without the need for separate fiber to SDI conversion. Also available are 3G-SDI Fiber LC and SC SFP options. Optional 12G/6G-SDI SFPsHDBNC-2TX-12G: 12G/6G-SDI Dual Coax HD-BNC TransmitterHDBNC-2RX-12G: 12G/6G-SDI Dual Coax HD-BNC ReceiverFIBERLC-1TX-12G: 12G-SDI Single Fiber LC Transmitter Single ModeFIBERLC-1RX-12G: 12G-SDI Single Fiber LC Receiver Single ModeFIBERLC-2TX-12G: 12G/6G-SDI Dual Fiber LC Transmitter Single ModeFIBERLC-2RX-12G: 12G/6G-SDI Dual Fiber LC Receiver Single ModeOptional 3G-SDI Single Mode SFPsFIBERSC-1-TX: 3G-SDI Single Fiber SC Transmitter Single ModeFIBERSC-1-RX: 3G-SDI Single Fiber SC Receiver Single ModeFIBERLC-1-TX: 3G-SDI Single Fiber LC Transmitter Single ModeFIBERLC-1-RX: 3G-SDI Single Fiber LC Receiver Single ModeFIBERLC-2-TX: 3G-SDI Dual Fiber LC Transmitter Single ModeFIBERLC-2-RX: 3G-SDI Dual Fiber LC Receiver Single ModeOptional 3G-SDI Multi-Mode SFPsFIBERLC-1TX-MM: 3G-SDI Single Fiber LC Transmitter Multi-Mode 850nmFIBERLC-1RX-MM: 3G-SDI Single Fiber LC Receiver Multi-Mode 850nmFIBERLC-2TX-MM: 3G-SDI Dual Fiber LC Transmitter Multi-Mode 850nmFIBERLC-2RX-MM: 3G-SDI Dual Fiber LC Receiver Multi-Mode 850nm

AJA HA5-Fiber The HA5-Fiber converts a HDMI input to 3G-SDI over single mode 1310 nm fiber optic cable (ST-style fiber connector) for transporting HDMI sources over fiber. The small form factor enables this Mini-Converter to easily fit onto the back of a camera or neatly behind an equipment rack. Embedded 8-Channel audio is supported in the fiber output allowing a convenient single cable audio/video connection up to 10km. The HA5-Fiber also provides 2-Channel RCA style audio inputs for a stereo audio input when needed. HDMI to 3G-SDI over fiberEDID EmulationSupports single mode 1310 nm fiber optic cable with ST transmitterSimple Frame Rate Conversion (FRC) 60 fps to 59.94 fps, and 59.94 fps to 60 fpsFull HDMI input support including embedded audioAdditional 2-Channel RCA style analog audio (-10dBu nominal) inputNo configuration necessary1m HDMI cable includedFive year warranty

Blackmagic Camera Fiber Converter The Blackmagic Camera Fiber Converter attaches to the back of your URSA Mini or URSA Broadcast camera. In addition to converting all of the audio, video, camera control and talkback into fiber, it also adds professional studio camera controls to the back of your camera. You get control for return feeds, dual intercom controls with the ability to mix in program audio, record, focus and iris controls, headset connectors, audio and more. The camera converter also includes a VLock mount plate on the top for attaching accessories such as a professional Blackmagic Studio Viewfinder. The Blackmagic Camera Fiber Converter has connections for your Ultra HD camera feed, 3 HD return feeds, full remote camera control, PTZ, multiple channels of talkback, tally and more. What's Included Blackmagic Camera Fiber ConverterMounting Bracket and screws for attaching to URSA Mini and URSA Broadcast cameras3x Short 12G SDI cables for SDI In and Out connectiong to URSA Mini and URSA BroadcastSD card with software and manual

Blackmagic Studio Fiber Converter The Blackmagic Studio Fiber Converter is used at the other end of your broadcast camera chain back in the studio or outside broadcast truck. It converts signals from the remote camera back into standard television industry connections that can be used with your live production switchers, audio mixers and talkback interfaces. It features a high capacity power supply to drive the cable so it can provide enough power for your camera and any accessories that you might add. The studio fiber converter includes connections for tally, two dual channel intercoms for industry standard 3rd party talkback systems, and even a backup engineering talkback channel in case the fiber goes down. You get a main Ultra HD camera feed plus 3 independent HD return feeds with full remote camera control, PTZ, tracker talkback and ethernet, all through a single SMPTE fiber cable. Plus, there is a large 5 inch LCD screen right next to the SMPTE fiber connection on the front panel for monitoring signals from the remote camera. This allows for easy patching and verification of the remote camera function! 

Middle Things Dispatch 4 PTZ 12G Built for on-location multi camera PTZ workflows in mind, the Fiber Dispatch 4 converts 4 pairs of SDI In/Out 4K video + IP LAN signals into 4 optical fiber outputs, using robust Neutrik OpticalCon Duo connectors. It is very similar to the Fiber Dispatch 5 12G, the difference is the added 1G LAN port at the back, adding LAN communication to all 4 fiber outputs, which makes it ideal for PTZ cameras!Thanks to a compact 1U rack design, the Fiber Dispatch 4 converter will sit perfectly inside your existing video rack, allowing you to connect up to 4 PTZ cameras using the Fiber Camera Box PTZ (Slave version). Built-in fans ensure proper cooling of all the converters for a hassle free workflow.Ever felt the time-consuming task of pulling three different SDI cables to a single camera , one for the video input, on for the return feed, and one for the LAN control? The Fiber Dispatch 4 merges each of these cable triplets into Duo Optical fiber cables, which are more lightweight and much more reliable than traditional copper BNC cables since they are insensitive to all electromagnetic interferences. You can run your fiber cable over thousands of miles with zero dropouts.The Neutrik Optical ConDuo connector makes this converter compatible both with widespread LC / LC fiber cables, as well as the rugged Optical Con Advanced Duo & Duo Lite cables by Neutrik, designed for field use and tough handling. The connector has a built-in automatic shutter that protects the fiber cores as soon as the cable is disconnected.The Middle Things Fiber Dispatch 4 can be used with the Middle Things Fiber Camera Box PTZ 12G - Standard Version (Slave) . It is not compatible with the Master version of the camera box, since the Dispatch 4 is a Master. It supports single mode LC optical fiber cables, as well as Neutrik OpticalCon Duo and OpticalCon Duo Lite cables. Supported SDI video signals are 3G, 6G, and 12G (max 2160p60)Technical SpecificationsI/O connections: 4x SDI In, 4x SDI Out, 1x LAN 1G, 4x Neutrik OpticalCon Duo LC , AC PowerInput Voltage : 85V ~ 264V ACFiber type : Single ModeDimensions : 4.5cm x 48cm x 22.5cmWeight : 3.0kgStorage Temperature : -10 to 60°C 

Middle Things Fiber Camera Box PTZ 12GCompact dual channel optical converter which transforms a double 4K SDI In + 4K SDI Out + LAN IP 1G signal into a single optical fiber cable through a robust Neutrik OpticalCon Duo connector. It is very similar to the Fiber Camera Box 12G, the only difference is the added 1G LAN port at the back, which makes it ideal for PTZ cameras!The Fiber Camera Box PTZ 12G (Slave) can be used with the Middle Things Dispatch 4 PTZ 12G or the Fiber Camera Box SDI 12G (Master). The Fiber Dispatch 4 is not required. Two Fiber Camera Box PTZ can be connected together, but please note that a Slave unit has to be used with a Master and vice versa. You cannot connect a Slave to a Slave or a Master to a Master. The Dispatch 4 PTZ acts as a Master device. Other than this compatibility difference, the Slave and Master are exactly the same unit in terms of features. Supported SDI video signals are 3G, 6G, and 12G (max 2160p60 )Technical SpecificationsI/O connections: 12-24V DC IN , SDI IN , SDI OUT (up to 6G) , Neutrik OpticalCon Duo LCInput Voltage : 12-24V DCFiber type : Single ModeDimensions :18cm x 10.5cm x 3.5cmWeight : 360g sStorage Temperature : -10 to 60°C

Middle Things Fiber Camera Box PTZ 12GCompact dual channel optical converter which transforms a double 4K SDI In + 4K SDI Out + LAN IP 1G signal into a single optical fiber cable through a robust Neutrik OpticalCon Duo connector. It is very similar to the Fiber Camera Box 12G, the only difference is the added 1G LAN port at the back, which makes it ideal for PTZ cameras!The Fiber Camera Box PTZ 12G (Slave) can be used with the Middle Things Dispatch 4 PTZ 12G or the Fiber Camera Box SDI 12G (Master). The Fiber Dispatch 4 is not required. Two Fiber Camera Box PTZ can be connected together, but please note that a Slave unit has to be used with a Master and vice versa. You cannot connect a Slave to a Slave or a Master to a Master. The Dispatch 4 PTZ acts as a Master device. Other than this compatibility difference, the Slave and Master are exactly the same unit in terms of features. Supported SDI video signals are 3G, 6G, and 12G (max 2160p60 )Technical SpecificationsI/O connections: 12-24V DC IN , SDI IN , SDI OUT (up to 6G) , Neutrik OpticalCon Duo LCInput Voltage : 12-24V DCFiber type : Single ModeDimensions :18cm x 10.5cm x 3.5cmWeight : 360g sStorage Temperature : -10 to 60°C

Middle Things Fiber Unite 10 12G Built for on-location multi-camera workflows in mind, the Fiber Unite 10 converts 10 pairs of SDI In/Out 4K video signals and a LAN connection into a single 12 channel optical cable : Neutrik opticalCON MTP 12.Ever felt the time-consuming task of pulling so many cable drums from the control room to the stage ? With the Fiber Unite 10 converter, you can merge up to 10 pairs of 4K SDI IN / SDI Out signals + a LAN connection into one single 12 channel MTP 12 fiber cable. You can connect the other end of the MTP 12 cable into another Unite 10 module that will demerge into 10 SDI In/Out Pairs + LAN.A multichannel optical cable is lighter and much more reliable than a traditional copper BNC cable since it is insensitive to all electromagnetic interferences. You can run your fiber cable over thousands of miles with zero dropouts.Thanks to a compact 2U rack design, the Fiber Unite converter will sit perfectly inside your existing video rack, allowing you to another Fiber Unite 10 module through a single cable.The opticalCON MTP 12 connector makes the Unite compatible with the rugged opticalCON MTP 12 cable drums by Neutrik, designed for field use and tough handling. The connector has a built-in automatic shutter that protects the 12 fiber cores as soon as the cable is disconnected.Technical SpecificationsI/O connections: 10x SDI In, 10x SDI Out, 1x Neutrik opticalCON MTP® 12, 1x LAN 1G , AC PowerInput Voltage : 85V ~ 264V ACPower Consumption : 40WFiber type : Single ModeLAN support : 10/100/1000Mbps Full/Half DuplexDimensions : 8.89cm x 48cm x 22.5cmWeight : 3.4kgStorage Temperature :-10 to 60°C