Core SWX GPM-X2B Charge your B-mount batteries while traveling with the GPM-X2B Mini Dual Travel Battery Charger. Taking advantage of the same technology built into the larger fleet chargers, this compact travel charger can charge a single battery at a 3A rate or two batteries simultaneously at 1.5A. Since it sits vertically with two batteries mounted, the GPM-X2B takes up less space than traditional chargers. Features 2 position travel charge for Helix B-mount battery packsCharges Core Helix B-mount packsRed and green status LEDsLightweight and compact90-240 VAC worldwide compatible input voltageInput: 100V-240AC 50/60HzCharge Current: 1 battery 3.0A, 2 batteries 1.5ASize: 14 cm x 11,4 cm x 7,6 cmWeight: 0,5 kg

Core SWX GT8 B-mount SKU: GT8-Q4B Core SWX GT8 B-mount is a rapid quad B-mount charger for Helix MAX packs. Experience the ultimate fast charging technology with a charger that combines both speed and safety. The highly advanced GT8 charger is capable of charging four Helix Max 98wh V-Mount, G-Mount, or B-Mount batteries in under 60 minutes, and it’s also the ideal choice for charging ApexHV lighting and grip batteries. Thanks to Core’s Sub60 Charge technology, the GT8 charger can rapidly charge your batteries, allowing you to use the same packs multiple times throughout the day, or “same-day cycleTM,” without worrying about long wait times for recharging. This feature is perfect for traveling professionals who face challenges in traveling with lithium-ion battery packs. With the GT8 charger, you can travel with fewer packs while maintaining the confidence that you can cycle the packs faster for your cinema and lighting production needs. Technical data Quick Charge Current: 4A @33v Simultaneous Size: 23,11 cm x 8,51 cm x 30,91 cm Weight: 2,27 kg Input Voltage: 90-240VAC 50/60Hz

Core SWX MACH-4B Featuring four independent charge bays, the Core SWX MACH4 Charger is capable of charging four batteries simultaneously by focusing on each individually. Offering the fastest charge speed on the market, the charger can completely charge four 98Wh batteries in approximately 90min.  Red and green LEDs indicate charging/complete status. Supporting 90-240 VAC input voltage, the Mach4 is worldwide compatible. The new low profile design is over ½” thinner than comparable models.  The charger features a recessed carry handle that makes transport convenient. The housing is made of aluminum, providing for a robust build and made in the USA. Features Four position charger, 4A Simultaneous rapid charge, B-mountFour independent B-Mount charge bays with simultaneous chargingDesigned for Core Helix B-mount packsApproximately 90min. charge time for four 98Wh batteriesRed and green status LEDs90-240 VAC worldwide compatible input voltageAluminium buildRecessed carry handle Technical data Quick Charge Current: 4A SimultaneousSize: 31,5 cm x 22,6 cm x 8,1 cmWeight: 2,3 kgInput Voltage: 90-240VAC 50/60Hz

Core SWX MACH-Q4MBi Core’s Micro Intelligent Charger Series continues to be the most advanced in the industry. Now with the inclusion of Adaptive Charge Control (ACC) and SafeFly Standalone Discharge function, the new Mach4 Micro chargers are at the pinnacle of technology. An upgraded charge circuit design now allows you to four 98wh packs in less then 1hr40min.   The units have an all aluminium build and made in the USA. Adaptive Charge Control(ACC): Core SWX’s new Adaptive Charge algorithm’s can improve battery longevity and performance up to 30% over the life of the pack. The new ACC algorithm evaluates the battery pack based on age, cycle count, and last full charge capacity, to determine the appropriate charge routine for the pack. While in charge mode, the charger continually monitors the pack for feedback during the charge process to adjust as needed. This process insures top performing packs are charged as fast as possible, while older packs are charged efficiently while accounting for changes in cell performance overtime to minimize degradation and capacity loss.  SafeFly Standalone Discharge:  In addition to battery management, the Mach4 Micro Chargers include SafeFly mode. The updated chargers add standalone discharge when AC mains power is not present. This feature provides additional value and allows you to carry one charging system for both charge and discharge of the battery packs. With one touch of the onboard membrane button console or via the Voltbridge App, the chargers will discharge all packs connected to under 30%. By initiating SafeFly mode when the charger is connected to AC mains, the charger with either discharge or charge packs to 30%, to insure all packs are ready for shipment. Features Four position charger, 4A Simultaneous rapid charge, Adaptive Charge ControlFour independent charge bays with Simultaneous chargingApproximately 90min. charge time for four 98Wh batteriesRed and green status LEDs with diagnostic LCD and Test functionCompatible with Voltbridge and Voltbridge Mesh Enterprise90-240 VAC worldwide compatible input voltageRecessed carry handleQuick Charge Current: 4A SimultaneousDischarge Current: Up to 2A per channelLCD: 4x20 Character BacklitInput Voltage: 90-240VAC 50/60Hz

Hawk-Woods BL-2X2 The Hawk-Woods BL-2X2 is a 2-Channel simultaneous charger for B-Lok (B-Mount) batteries. This 2.5Ah charger will charge up 2 of these high speed camera batteries within four hours. Weight: 1.38kg Size: 11 x 18 x 14 cm Capacity: 2.5Ah

Hawk-Woods BL-4X4 SKU: BL-4X4 The Hawk-Woods BL-4X4 is a 4-Channel simultaneous charger for B-Lok (B-Mount) batteries. This 2.5Ah charger will charge up to four of these high speed camera batteries within four hours. Technical data: Model: BL-4X4Type: B-LokWeight: 2.22kgSize: 22 x 18.5 x 15 cmCapacity: 2.5Ah

PATONA Platinum 4-channel charger for B-mount batteries 3A*4With the PATONA 4-slot B-Mount Charger, up to four batteries can be charged quickly, simultaneously, and independently of each other. It does not matter if the inserted batteries have different capacities. The integrated microcontroller-controlled charging technology automatically detects the required voltage of the inserted batteries and prevents overcharging or overheating. The B-Mount system used by the batteries is a standard that is expected to be used in more and more cameras and camcorders in the coming years. This charger is compatible with all batteries based on the B-Mount system. Important information, such as inserted batteries and charging or discharging of connected batteries, is displayed using multicolored LEDs. To charge 4x 290Wh B-Mount batteries, our charger only takes about 2 hours and 30 minutes to reach 80% charge capacity and about 3 hours and 50 minutes to fully charge.FeaturesCharge up to 4 B-Mount batteries simultaneouslySuper-fast charging speed: 100W per channel. Saves up to 60% charging time compared to conventional chargersInput 90-240VInnovative MicrocontrollerTechnical dataInput: AC 90V-240V 47-63HzOutput: B-Mount connector each 33.6V / 3ADimensions: 25.6x13.2x21.5cmWeight: 3.28kgPackage Includes1x PATONA Platinum 4-slot B-Mount Charger1x Power Cable1x QR Code for the Manual